! Started logfile: /image_prod/ug002_uva//J1033-2536_S_dfm.log on Wed Mar 4 23:37:42 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1033-2536_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1033-2536_S_uva.fits ! AN table 1: 60 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.833333 visibilities/baseline/integration-bin. ! Found source: J1033-2536 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 2250 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1033-2536_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000030Jy sigma=7.888120 ! Fit after self-cal, rms=0.957075Jy sigma=7.557680 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.955 mas, bmaj=24.09 mas, bpa=-34.26 degrees ! Estimated noise=2.98605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349109 Jy ! Component: 100 - total flux cleaned = 0.0412034 Jy ! Total flux subtracted in 100 components = 0.0412034 Jy ! Clean residual min=-0.003797 max=0.003934 Jy/beam ! Clean residual mean=0.000022 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.0412034 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0412034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055310Jy sigma=0.416765 ! Fit after self-cal, rms=0.054179Jy sigma=0.408238 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.435 mas, bmaj=23.61 mas, bpa=-32.52 degrees ! Estimated noise=1.91372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127267 Jy ! Component: 100 - total flux cleaned = 0.000882164 Jy ! Component: 150 - total flux cleaned = 0.000651871 Jy ! Component: 200 - total flux cleaned = 0.000698899 Jy ! Total flux subtracted in 200 components = 0.000698899 Jy ! Clean residual min=-0.002345 max=0.003183 Jy/beam ! Clean residual mean=0.000019 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.0419023 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 35 components and 0.0419023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053886Jy sigma=0.406357 ! Fit after self-cal, rms=0.053827Jy sigma=0.406230 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.435 x 23.61 at -32.52 degrees (North through East) ! Clean map min=-0.002435 max=0.043093 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 1.02 LA 1.00 MK 0.97 ! OV 0.88 PT 1.18 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 0.92 LA 1.04 MK 0.90 ! OV 0.97 PT 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 1.06 LA 0.94 MK 0.98 ! OV 1.01 PT 1.12 ! ! ! Fit before self-cal, rms=0.053827Jy sigma=0.406230 ! Fit after self-cal, rms=0.052714Jy sigma=0.404897 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.328 mas, bmaj=23.12 mas, bpa=-32.53 degrees ! Estimated noise=1.88947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169273 Jy ! Component: 100 - total flux cleaned = 0.00202588 Jy ! Component: 150 - total flux cleaned = 0.00202502 Jy ! Component: 200 - total flux cleaned = 0.00194322 Jy ! Total flux subtracted in 200 components = 0.00194322 Jy ! Clean residual min=-0.001971 max=0.002085 Jy/beam ! Clean residual mean=0.000012 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0438456 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.0438456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.052636Jy sigma=0.404496 ! Fit after self-cal, rms=0.052691Jy sigma=0.404113 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.052691Jy sigma=0.404113 ! Fit after self-cal, rms=0.052834Jy sigma=0.403157 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.29 mas, bmaj=22.9 mas, bpa=-32.57 degrees ! Estimated noise=1.88917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118983 Jy ! Component: 100 - total flux cleaned = 0.00133922 Jy ! Component: 150 - total flux cleaned = 0.00136138 Jy ! Component: 200 - total flux cleaned = 0.00142215 Jy ! Total flux subtracted in 200 components = 0.00142215 Jy ! Clean residual min=-0.001723 max=0.001972 Jy/beam ! Clean residual mean=0.000009 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0452677 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0452677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.052793Jy sigma=0.402960 ! Fit after self-cal, rms=0.052855Jy sigma=0.402813 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88172e-05 Jy ! Component: 100 - total flux cleaned = 4.03192e-05 Jy ! Component: 150 - total flux cleaned = 5.97247e-05 Jy ! Component: 200 - total flux cleaned = 4.03364e-05 Jy ! Total flux subtracted in 200 components = 4.03364e-05 Jy ! Clean residual min=-0.001755 max=0.001863 Jy/beam ! Clean residual mean=0.000009 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.045308 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.045308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.052832Jy sigma=0.402707 ! Fit after self-cal, rms=0.052832Jy sigma=0.402685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.052832Jy sigma=0.402685 ! Fit after self-cal, rms=0.053106Jy sigma=0.402444 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.282 mas, bmaj=22.79 mas, bpa=-32.58 degrees ! Estimated noise=1.88161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597988 Jy ! Component: 100 - total flux cleaned = 0.000716892 Jy ! Component: 150 - total flux cleaned = 0.000767079 Jy ! Component: 200 - total flux cleaned = 0.000766693 Jy ! Total flux subtracted in 200 components = 0.000766693 Jy ! Clean residual min=-0.001712 max=0.001870 Jy/beam ! Clean residual mean=0.000009 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0460747 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.0460747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053087Jy sigma=0.402367 ! Fit after self-cal, rms=0.053144Jy sigma=0.402304 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.74517e-06 Jy ! Component: 100 - total flux cleaned = 1.35005e-05 Jy ! Component: 150 - total flux cleaned = -2.8211e-06 Jy ! Component: 200 - total flux cleaned = 1.16164e-05 Jy ! Total flux subtracted in 200 components = 1.16164e-05 Jy ! Clean residual min=-0.001744 max=0.001793 Jy/beam ! Clean residual mean=0.000009 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0460864 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.0460864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053133Jy sigma=0.402251 ! Fit after self-cal, rms=0.053136Jy sigma=0.402239 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053136Jy sigma=0.402239 ! Fit after self-cal, rms=0.053259Jy sigma=0.402218 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.13 mas, bmaj=30.33 mas, bpa=-7.611 degrees ! Estimated noise=2.01767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366815 Jy ! Component: 100 - total flux cleaned = 0.000422368 Jy ! Component: 150 - total flux cleaned = 0.000430561 Jy ! Component: 200 - total flux cleaned = 0.000450908 Jy ! Total flux subtracted in 200 components = 0.000450908 Jy ! Clean residual min=-0.002017 max=0.001880 Jy/beam ! Clean residual mean=0.000011 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0465373 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.0465373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053252Jy sigma=0.402195 ! Fit after self-cal, rms=0.053268Jy sigma=0.402186 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.86531e-05 Jy ! Component: 100 - total flux cleaned = 4.0952e-05 Jy ! Component: 150 - total flux cleaned = 5.51456e-05 Jy ! Component: 200 - total flux cleaned = 7.4665e-05 Jy ! Total flux subtracted in 200 components = 7.4665e-05 Jy ! Clean residual min=-0.002008 max=0.001856 Jy/beam ! Clean residual mean=0.000011 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0466119 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 88 components and 0.0466119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053264Jy sigma=0.402167 ! Fit after self-cal, rms=0.053266Jy sigma=0.402164 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=5.281 mas, bmaj=22.72 mas, bpa=-32.57 degrees ! Estimated noise=1.87975 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.281 x 22.72 at -32.57 degrees (North through East) ! Clean map min=-0.0017396 max=0.042275 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=23.41 mas, bpa=-34.32 degrees ! Estimated noise=2.89343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345132 Jy ! Component: 100 - total flux cleaned = 0.0409299 Jy ! Component: 150 - total flux cleaned = 0.0425589 Jy ! Component: 200 - total flux cleaned = 0.0432893 Jy ! Total flux subtracted in 200 components = 0.0432893 Jy ! Clean residual min=-0.003567 max=0.003124 Jy/beam ! Clean residual mean=0.000010 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.0432893 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0432893 Jy ! Inverting map and beam ! Estimated beam: bmin=5.281 mas, bmaj=22.72 mas, bpa=-32.57 degrees ! Estimated noise=1.87975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198108 Jy ! Component: 100 - total flux cleaned = 0.00218789 Jy ! Component: 150 - total flux cleaned = 0.00236532 Jy ! Component: 200 - total flux cleaned = 0.00252209 Jy ! Total flux subtracted in 200 components = 0.00252209 Jy ! Clean residual min=-0.001935 max=0.002136 Jy/beam ! Clean residual mean=0.000008 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0458114 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.0458114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.13 mas, bmaj=30.33 mas, bpa=-7.611 degrees ! Estimated noise=2.01767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476782 Jy ! Component: 100 - total flux cleaned = 0.000529409 Jy ! Component: 150 - total flux cleaned = 0.000559904 Jy ! Component: 200 - total flux cleaned = 0.000602607 Jy ! Total flux subtracted in 200 components = 0.000602607 Jy ! Clean residual min=-0.001918 max=0.002149 Jy/beam ! Clean residual mean=0.000011 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.046414 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.01017e-05 Jy ! Component: 100 - total flux cleaned = 7.83838e-05 Jy ! Component: 150 - total flux cleaned = 0.000114619 Jy ! Component: 200 - total flux cleaned = 0.000148382 Jy ! Total flux subtracted in 200 components = 0.000148382 Jy ! Clean residual min=-0.001892 max=0.002130 Jy/beam ! Clean residual mean=0.000011 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0465624 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.0465624 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.281 mas, bmaj=22.72 mas, bpa=-32.57 degrees ! Estimated noise=1.87975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201628 Jy ! Component: 100 - total flux cleaned = -0.00014819 Jy ! Component: 150 - total flux cleaned = -9.71805e-05 Jy ! Component: 200 - total flux cleaned = -5.08168e-05 Jy ! Total flux subtracted in 200 components = -5.08168e-05 Jy ! Clean residual min=-0.001750 max=0.002063 Jy/beam ! Clean residual mean=0.000009 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0465116 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.0465116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053306Jy sigma=0.402427 ! Fit after self-cal, rms=0.053306Jy sigma=0.402376 wmodel J1033-2536_S_map.mod ! Writing 69 model components to file: J1033-2536_S_map.mod wobs J1033-2536_S_uvs.fits ! Writing UV FITS file: J1033-2536_S_uvs.fits wwins J1033-2536_S_map.win ! wwins: Wrote 1 windows to J1033-2536_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347107 Jy ! Component: 100 - total flux cleaned = 0.000461196 Jy ! Component: 150 - total flux cleaned = 0.000487193 Jy ! Component: 200 - total flux cleaned = 0.000462805 Jy ! Component: 250 - total flux cleaned = 0.00044044 Jy ! Component: 300 - total flux cleaned = 0.000440384 Jy ! Component: 350 - total flux cleaned = 0.000378943 Jy ! Component: 400 - total flux cleaned = 0.000340134 Jy ! Component: 450 - total flux cleaned = 0.000377341 Jy ! Component: 500 - total flux cleaned = 0.000377472 Jy ! Component: 550 - total flux cleaned = 0.000428786 Jy ! Component: 600 - total flux cleaned = 0.000461705 Jy ! Component: 650 - total flux cleaned = 0.000509258 Jy ! Component: 700 - total flux cleaned = 0.000554785 Jy ! Component: 750 - total flux cleaned = 0.000598546 Jy ! Component: 800 - total flux cleaned = 0.000626474 Jy ! Component: 850 - total flux cleaned = 0.000667682 Jy ! Component: 900 - total flux cleaned = 0.000654335 Jy ! Component: 950 - total flux cleaned = 0.000654725 Jy ! Component: 1000 - total flux cleaned = 0.000680318 Jy ! Component: 1050 - total flux cleaned = 0.000705278 Jy ! Component: 1100 - total flux cleaned = 0.000754658 Jy ! Component: 1150 - total flux cleaned = 0.000803166 Jy ! Component: 1200 - total flux cleaned = 0.00085095 Jy ! Component: 1250 - total flux cleaned = 0.000922009 Jy ! Component: 1300 - total flux cleaned = 0.000945483 Jy ! Component: 1350 - total flux cleaned = 0.000991967 Jy ! Component: 1400 - total flux cleaned = 0.00103796 Jy ! Component: 1450 - total flux cleaned = 0.00109475 Jy ! Component: 1500 - total flux cleaned = 0.00113957 Jy ! Component: 1550 - total flux cleaned = 0.00117296 Jy ! Component: 1600 - total flux cleaned = 0.00118404 Jy ! Component: 1650 - total flux cleaned = 0.00122794 Jy ! Component: 1700 - total flux cleaned = 0.00126062 Jy ! Component: 1750 - total flux cleaned = 0.00126064 Jy ! Component: 1800 - total flux cleaned = 0.00128209 Jy ! Component: 1850 - total flux cleaned = 0.00131405 Jy ! Component: 1900 - total flux cleaned = 0.00129295 Jy ! Component: 1950 - total flux cleaned = 0.00132446 Jy ! Component: 2000 - total flux cleaned = 0.00131409 Jy ! Component: 2050 - total flux cleaned = 0.00132448 Jy ! Component: 2100 - total flux cleaned = 0.00130379 Jy ! Component: 2150 - total flux cleaned = 0.00131413 Jy ! Component: 2200 - total flux cleaned = 0.00131414 Jy ! Component: 2250 - total flux cleaned = 0.00128328 Jy ! Component: 2300 - total flux cleaned = 0.00128322 Jy ! Component: 2350 - total flux cleaned = 0.00129353 Jy ! Component: 2400 - total flux cleaned = 0.00125253 Jy ! Component: 2450 - total flux cleaned = 0.0012217 Jy ! Component: 2500 - total flux cleaned = 0.00122167 Jy ! Component: 2550 - total flux cleaned = 0.00125273 Jy ! Component: 2600 - total flux cleaned = 0.00127357 Jy ! Component: 2650 - total flux cleaned = 0.00130472 Jy ! Component: 2700 - total flux cleaned = 0.00133605 Jy ! Component: 2750 - total flux cleaned = 0.0013675 Jy ! Component: 2800 - total flux cleaned = 0.00137797 Jy ! Component: 2850 - total flux cleaned = 0.00142035 Jy ! Component: 2900 - total flux cleaned = 0.00144177 Jy ! Component: 2950 - total flux cleaned = 0.00147407 Jy ! Component: 3000 - total flux cleaned = 0.00149565 Jy ! Component: 3050 - total flux cleaned = 0.00153908 Jy ! Component: 3100 - total flux cleaned = 0.00156092 Jy ! Component: 3150 - total flux cleaned = 0.00158299 Jy ! Component: 3200 - total flux cleaned = 0.00160513 Jy ! Component: 3250 - total flux cleaned = 0.00163854 Jy ! Component: 3300 - total flux cleaned = 0.001661 Jy ! Component: 3350 - total flux cleaned = 0.00169492 Jy ! Component: 3400 - total flux cleaned = 0.00170634 Jy ! Component: 3450 - total flux cleaned = 0.00172933 Jy ! Component: 3500 - total flux cleaned = 0.00174082 Jy ! Component: 3550 - total flux cleaned = 0.00174087 Jy ! Component: 3600 - total flux cleaned = 0.00172915 Jy ! Component: 3650 - total flux cleaned = 0.00174099 Jy ! Component: 3700 - total flux cleaned = 0.00172903 Jy ! Component: 3750 - total flux cleaned = 0.00172905 Jy ! Component: 3800 - total flux cleaned = 0.00171697 Jy ! Component: 3850 - total flux cleaned = 0.00170469 Jy ! Component: 3900 - total flux cleaned = 0.00167985 Jy ! Component: 3950 - total flux cleaned = 0.00167984 Jy ! Component: 4000 - total flux cleaned = 0.00167982 Jy ! Component: 4050 - total flux cleaned = 0.00166684 Jy ! Total flux subtracted in 4096 components = 0.00166677 Jy ! Clean residual min=-0.000681 max=0.000703 Jy/beam ! Clean residual mean=0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.0481783 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 364 components and 0.0481783 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1033-2536_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.281 x 22.72 at -32.57 degrees (North through East) ! Clean map min=-0.0018562 max=0.040247 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1033-2536_S_map.fits wmodel /image_prod/ug002_uva//J1033-2536_S_map.mod ! Writing 364 model components to file: /image_prod/ug002_uva//J1033-2536_S_map.mod wobs /image_prod/ug002_uva//J1033-2536_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1033-2536_S_uvs.fits wwins /image_prod/ug002_uva//J1033-2536_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1033-2536_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0402473 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282011 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.10209 2.10209 4.20417 8.40834 16.8167 33.6334 67.2667 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.04 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 142.715 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1033-2536_S_dfm.log closed on Wed Mar 4 23:37:46 2020