! Started logfile: /image_prod/ug002_uva//J1023+2856_X_a_dfm.log on Wed Mar  4 23:32:59 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1023+2856_X_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1023+2856_X_a_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.921852 visibilities/baseline/integration-bin.
! Found source: J1023+2856
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29868 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1023+2856_X_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002784Jy  sigma=10.073470
! Fit after  self-cal, rms=0.927333Jy  sigma=9.308632
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.731 mas, bmaj=1.385 mas, bpa=-6.207 degrees
! Estimated noise=0.81378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0567336 Jy
! Component: 100  -  total flux cleaned = 0.0700086 Jy
! Total flux subtracted in 100 components = 0.0700086 Jy
! Clean residual min=-0.002631 max=0.005035 Jy/beam
! Clean residual mean=-0.000000 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.0700086 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0700086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051306Jy  sigma=0.481582
! Fit after  self-cal, rms=0.051121Jy  sigma=0.479700
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00534115 Jy
! Component: 100  -  total flux cleaned = 0.00538476 Jy
! Total flux subtracted in 100 components = 0.00538476 Jy
! Clean residual min=-0.002291 max=0.002194 Jy/beam
! Clean residual mean=0.000000 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0753934 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0753934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050667Jy  sigma=0.475398
! Fit after  self-cal, rms=0.050662Jy  sigma=0.475330
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9768 mas, bmaj=1.734 mas, bpa=-5.474 degrees
! Estimated noise=0.414364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024029 Jy
! Component: 100  -  total flux cleaned = 0.00390421 Jy
! Component: 150  -  total flux cleaned = 0.00474511 Jy
! Component: 200  -  total flux cleaned = 0.00492553 Jy
! Total flux subtracted in 200 components = 0.00492553 Jy
! Clean residual min=-0.001599 max=0.001752 Jy/beam
! Clean residual mean=0.000001 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.0803189 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 29 components and 0.0803189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050525Jy  sigma=0.473965
! Fit after  self-cal, rms=0.050512Jy  sigma=0.473797
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9768 x 1.734 at -5.474 degrees (North through East)
! Clean map  min=-0.0014985  max=0.072876 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.03     KP        1.06     
!   LA        1.03     MK        1.04     NL        1.09     OV        0.91     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.06     HN        0.99     KP        1.06     
!   LA        1.01     MK        1.06     NL        1.14     OV        0.93     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.99     KP        1.06     
!   LA        0.99     MK        1.04     NL        1.13     OV        0.93     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.09     KP        1.07     
!   LA        1.02     MK        0.99     NL        1.10     OV        0.94     
!   PT        0.91     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.06     HN        1.04     KP        1.06     
!   LA        1.02     MK        1.01     NL        1.11     OV        0.92     
!   PT        0.92     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.03     
!   LA        0.99     MK        1.04     NL        1.13     OV        0.94     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.01     KP        1.04     
!   LA        0.99     MK        1.01     NL        1.08     OV        0.92     
!   PT        0.90     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.98     KP        1.06     
!   LA        0.99     MK        1.05     NL        1.09     OV        0.94     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        0.99     KP        1.08     
!   LA        0.99     MK        0.97     NL        1.09     OV        0.88     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.03     HN        0.97     KP        1.01     
!   LA        1.05     MK        0.98     NL        1.11     OV        0.91     
!   PT        0.92     SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.08     
!   LA        0.96     MK        1.00     NL        1.08     OV        0.88     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.03     KP        1.05     
!   LA        1.04     MK        0.99     NL        1.10     OV        0.94     
!   PT        0.86     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.050512Jy  sigma=0.473797
! Fit after  self-cal, rms=0.049065Jy  sigma=0.469715
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9741 mas, bmaj=1.722 mas, bpa=-4.277 degrees
! Estimated noise=0.412109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.8, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123938 Jy
! Component: 100  -  total flux cleaned = 0.00172755 Jy
! Component: 150  -  total flux cleaned = 0.00193916 Jy
! Component: 200  -  total flux cleaned = 0.00199462 Jy
! Total flux subtracted in 200 components = 0.00199462 Jy
! Clean residual min=-0.000966 max=0.000772 Jy/beam
! Clean residual mean=-0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0823135 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 56 components and 0.0823135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049030Jy  sigma=0.469339
! Fit after  self-cal, rms=0.049030Jy  sigma=0.469217
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049030Jy  sigma=0.469217
! Fit after  self-cal, rms=0.049147Jy  sigma=0.467598
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9753 mas, bmaj=1.712 mas, bpa=-4.25 degrees
! Estimated noise=0.411628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.15775e-05 Jy
! Component: 100  -  total flux cleaned = 5.73966e-05 Jy
! Component: 150  -  total flux cleaned = 4.38691e-05 Jy
! Component: 200  -  total flux cleaned = 2.06663e-05 Jy
! Total flux subtracted in 200 components = 2.06663e-05 Jy
! Clean residual min=-0.000850 max=0.000673 Jy/beam
! Clean residual mean=0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0823342 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 73 components and 0.0823342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049138Jy  sigma=0.467519
! Fit after  self-cal, rms=0.049151Jy  sigma=0.467480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.53601e-05 Jy
! Component: 100  -  total flux cleaned = -3.66561e-05 Jy
! Component: 150  -  total flux cleaned = -5.60816e-05 Jy
! Component: 200  -  total flux cleaned = -5.59254e-05 Jy
! Total flux subtracted in 200 components = -5.59254e-05 Jy
! Clean residual min=-0.000840 max=0.000673 Jy/beam
! Clean residual mean=0.000000 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.0822783 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.0822783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049147Jy  sigma=0.467445
! Fit after  self-cal, rms=0.049147Jy  sigma=0.467443
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049147Jy  sigma=0.467443
! Fit after  self-cal, rms=0.049168Jy  sigma=0.467436
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9761 mas, bmaj=1.712 mas, bpa=-4.231 degrees
! Estimated noise=0.41157 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157122 Jy
! Component: 100  -  total flux cleaned = -0.000165944 Jy
! Component: 150  -  total flux cleaned = -0.000173866 Jy
! Component: 200  -  total flux cleaned = -0.000166335 Jy
! Total flux subtracted in 200 components = -0.000166335 Jy
! Clean residual min=-0.000815 max=0.000690 Jy/beam
! Clean residual mean=0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0821119 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 83 components and 0.0821119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049165Jy  sigma=0.467409
! Fit after  self-cal, rms=0.049167Jy  sigma=0.467407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.26089e-05 Jy
! Component: 100  -  total flux cleaned = -2.14046e-05 Jy
! Component: 150  -  total flux cleaned = -2.17031e-05 Jy
! Component: 200  -  total flux cleaned = -9.18578e-06 Jy
! Total flux subtracted in 200 components = -9.18578e-06 Jy
! Clean residual min=-0.000811 max=0.000696 Jy/beam
! Clean residual mean=0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0821027 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 88 components and 0.0821027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049165Jy  sigma=0.467392
! Fit after  self-cal, rms=0.049165Jy  sigma=0.467390
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049165Jy  sigma=0.467390
! Fit after  self-cal, rms=0.049178Jy  sigma=0.467388
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=2.718 mas, bpa=-5.393 degrees
! Estimated noise=0.500235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.17372e-05 Jy
! Component: 100  -  total flux cleaned = -8.71564e-06 Jy
! Component: 150  -  total flux cleaned = -1.96641e-05 Jy
! Component: 200  -  total flux cleaned = -2.45002e-05 Jy
! Total flux subtracted in 200 components = -2.45002e-05 Jy
! Clean residual min=-0.000876 max=0.000842 Jy/beam
! Clean residual mean=0.000000 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0820782 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 0.0820782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049177Jy  sigma=0.467382
! Fit after  self-cal, rms=0.049178Jy  sigma=0.467382
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.40322e-05 Jy
! Component: 100  -  total flux cleaned = -2.03907e-05 Jy
! Component: 150  -  total flux cleaned = -1.66067e-05 Jy
! Component: 200  -  total flux cleaned = -1.65764e-05 Jy
! Total flux subtracted in 200 components = -1.65764e-05 Jy
! Clean residual min=-0.000872 max=0.000836 Jy/beam
! Clean residual mean=0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.0820617 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 107 components and 0.0820617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049178Jy  sigma=0.467379
! Fit after  self-cal, rms=0.049178Jy  sigma=0.467381
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9765 mas, bmaj=1.712 mas, bpa=-4.206 degrees
! Estimated noise=0.411551 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9765 x 1.712 at -4.206 degrees (North through East)
! Clean map  min=-0.00071955  max=0.072522 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7306 mas, bmaj=1.364 mas, bpa=-4.93 degrees
! Estimated noise=0.805135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.056076 Jy
! Component: 100  -  total flux cleaned = 0.0693236 Jy
! Component: 150  -  total flux cleaned = 0.0743051 Jy
! Component: 200  -  total flux cleaned = 0.0767351 Jy
! Total flux subtracted in 200 components = 0.0767351 Jy
! Clean residual min=-0.001804 max=0.001642 Jy/beam
! Clean residual mean=0.000000 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.0767351 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0767351 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9765 mas, bmaj=1.712 mas, bpa=-4.206 degrees
! Estimated noise=0.411551 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159156 Jy
! Component: 100  -  total flux cleaned = 0.00263597 Jy
! Component: 150  -  total flux cleaned = 0.00305116 Jy
! Component: 200  -  total flux cleaned = 0.00334482 Jy
! Total flux subtracted in 200 components = 0.00334482 Jy
! Clean residual min=-0.000875 max=0.000777 Jy/beam
! Clean residual mean=0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.0800799 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 40 components and 0.0800799 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=2.718 mas, bpa=-5.393 degrees
! Estimated noise=0.500235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000726251 Jy
! Component: 100  -  total flux cleaned = 0.00110824 Jy
! Component: 150  -  total flux cleaned = 0.00131797 Jy
! Component: 200  -  total flux cleaned = 0.00150928 Jy
! Total flux subtracted in 200 components = 0.00150928 Jy
! Clean residual min=-0.000934 max=0.000864 Jy/beam
! Clean residual mean=0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0815891 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.8454e-05 Jy
! Component: 100  -  total flux cleaned = 0.00011989 Jy
! Component: 150  -  total flux cleaned = 0.000167859 Jy
! Component: 200  -  total flux cleaned = 0.000204749 Jy
! Total flux subtracted in 200 components = 0.000204749 Jy
! Clean residual min=-0.000924 max=0.000845 Jy/beam
! Clean residual mean=0.000000 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0817939 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 83 components and 0.0817939 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9765 mas, bmaj=1.712 mas, bpa=-4.206 degrees
! Estimated noise=0.411551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.014e-05 Jy
! Component: 100  -  total flux cleaned = -2.9915e-05 Jy
! Component: 150  -  total flux cleaned = -2.97156e-05 Jy
! Component: 200  -  total flux cleaned = -4.40004e-06 Jy
! Total flux subtracted in 200 components = -4.40004e-06 Jy
! Clean residual min=-0.000811 max=0.000708 Jy/beam
! Clean residual mean=0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0817895 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.0817895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049189Jy  sigma=0.467512
! Fit after  self-cal, rms=0.049189Jy  sigma=0.467503
wmodel J1023+2856_X_a_map.mod
! Writing 96 model components to file: J1023+2856_X_a_map.mod
wobs   J1023+2856_X_a_uvs.fits
! Writing UV FITS file: J1023+2856_X_a_uvs.fits
wwins  J1023+2856_X_a_map.win
! wwins: Wrote 3 windows to J1023+2856_X_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000356089 Jy
! Component: 100  -  total flux cleaned = -0.000558121 Jy
! Component: 150  -  total flux cleaned = -0.000685969 Jy
! Component: 200  -  total flux cleaned = -0.000845307 Jy
! Component: 250  -  total flux cleaned = -0.000987711 Jy
! Component: 300  -  total flux cleaned = -0.00111507 Jy
! Component: 350  -  total flux cleaned = -0.00122815 Jy
! Component: 400  -  total flux cleaned = -0.00133889 Jy
! Component: 450  -  total flux cleaned = -0.00145861 Jy
! Component: 500  -  total flux cleaned = -0.00152284 Jy
! Component: 550  -  total flux cleaned = -0.00162835 Jy
! Component: 600  -  total flux cleaned = -0.00171163 Jy
! Component: 650  -  total flux cleaned = -0.00178359 Jy
! Component: 700  -  total flux cleaned = -0.00183432 Jy
! Component: 750  -  total flux cleaned = -0.00189459 Jy
! Component: 800  -  total flux cleaned = -0.00192437 Jy
! Component: 850  -  total flux cleaned = -0.00193425 Jy
! Component: 900  -  total flux cleaned = -0.00200236 Jy
! Component: 950  -  total flux cleaned = -0.0020022 Jy
! Component: 1000  -  total flux cleaned = -0.00204979 Jy
! Component: 1050  -  total flux cleaned = -0.00205919 Jy
! Component: 1100  -  total flux cleaned = -0.00208716 Jy
! Component: 1150  -  total flux cleaned = -0.00208707 Jy
! Component: 1200  -  total flux cleaned = -0.00212369 Jy
! Component: 1250  -  total flux cleaned = -0.00214185 Jy
! Component: 1300  -  total flux cleaned = -0.00216895 Jy
! Component: 1350  -  total flux cleaned = -0.00217791 Jy
! Component: 1400  -  total flux cleaned = -0.00224869 Jy
! Component: 1450  -  total flux cleaned = -0.00223112 Jy
! Component: 1500  -  total flux cleaned = -0.00227472 Jy
! Component: 1550  -  total flux cleaned = -0.00227479 Jy
! Component: 1600  -  total flux cleaned = -0.00232613 Jy
! Component: 1650  -  total flux cleaned = -0.0023602 Jy
! Component: 1700  -  total flux cleaned = -0.00238537 Jy
! Component: 1750  -  total flux cleaned = -0.00240208 Jy
! Component: 1800  -  total flux cleaned = -0.00244351 Jy
! Component: 1850  -  total flux cleaned = -0.0024516 Jy
! Component: 1900  -  total flux cleaned = -0.00249234 Jy
! Component: 1950  -  total flux cleaned = -0.00250045 Jy
! Component: 2000  -  total flux cleaned = -0.00251651 Jy
! Component: 2050  -  total flux cleaned = -0.00256444 Jy
! Component: 2100  -  total flux cleaned = -0.00259604 Jy
! Component: 2150  -  total flux cleaned = -0.00260386 Jy
! Component: 2200  -  total flux cleaned = -0.00265077 Jy
! Component: 2250  -  total flux cleaned = -0.00264297 Jy
! Component: 2300  -  total flux cleaned = -0.00265837 Jy
! Component: 2350  -  total flux cleaned = -0.00269661 Jy
! Component: 2400  -  total flux cleaned = -0.00271181 Jy
! Component: 2450  -  total flux cleaned = -0.0026967 Jy
! Component: 2500  -  total flux cleaned = -0.00272679 Jy
! Component: 2550  -  total flux cleaned = -0.00274928 Jy
! Component: 2600  -  total flux cleaned = -0.00277155 Jy
! Component: 2650  -  total flux cleaned = -0.00279364 Jy
! Component: 2700  -  total flux cleaned = -0.00283047 Jy
! Component: 2750  -  total flux cleaned = -0.00281577 Jy
! Component: 2800  -  total flux cleaned = -0.0028376 Jy
! Component: 2850  -  total flux cleaned = -0.00285207 Jy
! Component: 2900  -  total flux cleaned = -0.00283768 Jy
! Component: 2950  -  total flux cleaned = -0.00288057 Jy
! Component: 3000  -  total flux cleaned = -0.00287356 Jy
! Component: 3050  -  total flux cleaned = -0.00290884 Jy
! Component: 3100  -  total flux cleaned = -0.00293691 Jy
! Component: 3150  -  total flux cleaned = -0.00294393 Jy
! Component: 3200  -  total flux cleaned = -0.00295091 Jy
! Component: 3250  -  total flux cleaned = -0.00296471 Jy
! Component: 3300  -  total flux cleaned = -0.00297164 Jy
! Component: 3350  -  total flux cleaned = -0.00298535 Jy
! Component: 3400  -  total flux cleaned = -0.00297855 Jy
! Component: 3450  -  total flux cleaned = -0.00301244 Jy
! Component: 3500  -  total flux cleaned = -0.0030057 Jy
! Component: 3550  -  total flux cleaned = -0.00297889 Jy
! Component: 3600  -  total flux cleaned = -0.00302562 Jy
! Component: 3650  -  total flux cleaned = -0.00302566 Jy
! Component: 3700  -  total flux cleaned = -0.00301906 Jy
! Component: 3750  -  total flux cleaned = -0.00306514 Jy
! Component: 3800  -  total flux cleaned = -0.00305857 Jy
! Component: 3850  -  total flux cleaned = -0.0030586 Jy
! Component: 3900  -  total flux cleaned = -0.00308457 Jy
! Component: 3950  -  total flux cleaned = -0.00307809 Jy
! Component: 4000  -  total flux cleaned = -0.00310382 Jy
! Component: 4050  -  total flux cleaned = -0.00310378 Jy
! Total flux subtracted in 4096 components = -0.00311012 Jy
! Clean residual min=-0.000375 max=0.000348 Jy/beam
! Clean residual mean=0.000000 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0786794 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 402 components and 0.0786794 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1023+2856_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9765 x 1.712 at -4.206 degrees (North through East)
! Clean map  min=-0.00063312  max=0.07254 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1023+2856_X_a_map.fits
wmodel /image_prod/ug002_uva//J1023+2856_X_a_map.mod
! Writing 402 model components to file: /image_prod/ug002_uva//J1023+2856_X_a_map.mod
wobs   /image_prod/ug002_uva//J1023+2856_X_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1023+2856_X_a_uvs.fits
wwins  /image_prod/ug002_uva//J1023+2856_X_a_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1023+2856_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.07254 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000107809 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.445862 0.445862 0.891724 1.78345 3.5669 7.13379 14.2676 28.5352 57.0704
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.072 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  672.853 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1023+2856_X_a_dfm.log closed on Wed Mar  4 23:33:04 2020