! Started logfile: /image_prod/ug002_uva//J1022+3041_X_dfm.log on Wed Mar  4 23:31:54 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1022+3041_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1022+3041_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.922222 visibilities/baseline/integration-bin.
! Found source: J1022+3041
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1022+3041_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009114Jy  sigma=8.927300
! Fit after  self-cal, rms=0.920394Jy  sigma=8.182310
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7329 mas, bmaj=1.334 mas, bpa=-5.597 degrees
! Estimated noise=1.02471 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0619068 Jy
! Component: 100  -  total flux cleaned = 0.0760072 Jy
! Total flux subtracted in 100 components = 0.0760072 Jy
! Clean residual min=-0.013883 max=0.033300 Jy/beam
! Clean residual mean=-0.000016 rms=0.002830 Jy/beam
! Combined flux in latest and established models = 0.0760072 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0760072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101650Jy  sigma=0.872324
! Fit after  self-cal, rms=0.100563Jy  sigma=0.861996
! Inverting map 
! Added new window around map position (1.8, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0293908 Jy
! Component: 100  -  total flux cleaned = 0.0419478 Jy
! Total flux subtracted in 100 components = 0.0419478 Jy
! Clean residual min=-0.012262 max=0.026952 Jy/beam
! Clean residual mean=-0.000012 rms=0.002289 Jy/beam
! Combined flux in latest and established models = 0.117955 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.117955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089780Jy  sigma=0.766352
! Fit after  self-cal, rms=0.086226Jy  sigma=0.737361
! Inverting map 
! Added new window around map position (4, -8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230263 Jy
! Component: 100  -  total flux cleaned = 0.0375552 Jy
! Total flux subtracted in 100 components = 0.0375552 Jy
! Clean residual min=-0.007873 max=0.013913 Jy/beam
! Clean residual mean=-0.000009 rms=0.001782 Jy/beam
! Combined flux in latest and established models = 0.15551 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.15551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077226Jy  sigma=0.653526
! Fit after  self-cal, rms=0.075772Jy  sigma=0.640923
! Inverting map 
! Added new window around map position (3, -7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156786 Jy
! Component: 100  -  total flux cleaned = 0.0270281 Jy
! Total flux subtracted in 100 components = 0.0270281 Jy
! Clean residual min=-0.005984 max=0.010971 Jy/beam
! Clean residual mean=-0.000007 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.182538 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.182538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070240Jy  sigma=0.587472
! Fit after  self-cal, rms=0.069718Jy  sigma=0.583385
! Inverting map 
! Added new window around map position (2.4, -5.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120271 Jy
! Component: 100  -  total flux cleaned = 0.0210863 Jy
! Total flux subtracted in 100 components = 0.0210863 Jy
! Clean residual min=-0.004956 max=0.005923 Jy/beam
! Clean residual mean=-0.000006 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.203625 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.203625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066027Jy  sigma=0.548582
! Fit after  self-cal, rms=0.065820Jy  sigma=0.546982
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.931 mas, bmaj=1.651 mas, bpa=-4.047 degrees
! Estimated noise=0.470707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141774 Jy
! Component: 100  -  total flux cleaned = 0.0242976 Jy
! Component: 150  -  total flux cleaned = 0.0323565 Jy
! Component: 200  -  total flux cleaned = 0.038937 Jy
! Total flux subtracted in 200 components = 0.038937 Jy
! Clean residual min=-0.005168 max=0.005841 Jy/beam
! Clean residual mean=-0.000017 rms=0.001355 Jy/beam
! Combined flux in latest and established models = 0.242561 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 72 components and 0.242561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061565Jy  sigma=0.506168
! Fit after  self-cal, rms=0.061182Jy  sigma=0.502521
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.931 x 1.651 at -4.047 degrees (North through East)
! Clean map  min=-0.0045186  max=0.0765 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.91     HN        0.98     KP        0.96     
!   LA        1.05     MK        1.11     NL        1.04     OV        0.86     
!   PT        0.74     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.90     HN        0.99     KP        0.96     
!   LA        1.03     MK        1.10     NL        1.07     OV        0.89     
!   PT        0.72     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.91     HN        1.00     KP        0.97     
!   LA        1.03     MK        1.08     NL        1.09     OV        0.88     
!   PT        0.73     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.91     HN        1.01     KP        0.98     
!   LA        1.04     MK        1.07     NL        1.04     OV        0.86     
!   PT        0.74     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     HN        1.03     KP        0.97     
!   LA        1.03     MK        1.10     NL        1.05     OV        0.90     
!   PT        0.72     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.90     HN        1.04     KP        0.99     
!   LA        1.01     MK        1.06     NL        1.11     OV        0.89     
!   PT        0.73     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.89     HN        1.00     KP        0.98     
!   LA        1.04     MK        1.06     NL        1.10     OV        0.92     
!   PT        0.73     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.91     HN        1.01     KP        0.98     
!   LA        1.04     MK        1.11     NL        1.09     OV        0.92     
!   PT        0.71     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.90     HN        0.97     KP        1.00     
!   LA        1.07     MK        1.09     NL        1.09     OV        0.87     
!   PT        0.75     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.91     HN        1.03     KP        0.98     
!   LA        1.05     MK        1.11     NL        1.09     OV        0.88     
!   PT        0.77     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.92     HN        1.02     KP        0.98     
!   LA        1.06     MK        1.06     NL        1.09     OV        0.88     
!   PT        0.74     SC        1.10     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.92     HN        1.01     KP        0.98     
!   LA        1.04     MK        1.11     NL        1.09     OV        0.90     
!   PT        0.74     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.061182Jy  sigma=0.502521
! Fit after  self-cal, rms=0.056132Jy  sigma=0.471823
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9671 mas, bmaj=1.689 mas, bpa=-3.101 degrees
! Estimated noise=0.440104 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.13204e-05 Jy
! Component: 100  -  total flux cleaned = 0.00103864 Jy
! Component: 150  -  total flux cleaned = 0.00178995 Jy
! Component: 200  -  total flux cleaned = 0.00230493 Jy
! Total flux subtracted in 200 components = 0.00230493 Jy
! Clean residual min=-0.002406 max=0.002513 Jy/beam
! Clean residual mean=0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.244866 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 91 components and 0.244866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055749Jy  sigma=0.467324
! Fit after  self-cal, rms=0.055776Jy  sigma=0.466447
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055776Jy  sigma=0.466447
! Fit after  self-cal, rms=0.056413Jy  sigma=0.457841
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9664 mas, bmaj=1.682 mas, bpa=-4.221 degrees
! Estimated noise=0.43549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112075 Jy
! Component: 100  -  total flux cleaned = 0.00177026 Jy
! Component: 150  -  total flux cleaned = 0.00204032 Jy
! Component: 200  -  total flux cleaned = 0.00211555 Jy
! Total flux subtracted in 200 components = 0.00211555 Jy
! Clean residual min=-0.001217 max=0.001447 Jy/beam
! Clean residual mean=0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.246982 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 107 components and 0.246982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056306Jy  sigma=0.456567
! Fit after  self-cal, rms=0.056319Jy  sigma=0.456291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-27.6, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000924529 Jy
! Component: 100  -  total flux cleaned = 0.00132687 Jy
! Component: 150  -  total flux cleaned = 0.0014241 Jy
! Component: 200  -  total flux cleaned = 0.00153916 Jy
! Total flux subtracted in 200 components = 0.00153916 Jy
! Clean residual min=-0.001092 max=0.001031 Jy/beam
! Clean residual mean=0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.248521 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 116 components and 0.248521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056267Jy  sigma=0.455767
! Fit after  self-cal, rms=0.056264Jy  sigma=0.455730
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056264Jy  sigma=0.455730
! Fit after  self-cal, rms=0.055913Jy  sigma=0.455591
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9647 mas, bmaj=1.678 mas, bpa=-4.289 degrees
! Estimated noise=0.433279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000471399 Jy
! Component: 100  -  total flux cleaned = 0.000964243 Jy
! Component: 150  -  total flux cleaned = 0.00112744 Jy
! Component: 200  -  total flux cleaned = 0.00127599 Jy
! Total flux subtracted in 200 components = 0.00127599 Jy
! Clean residual min=-0.000956 max=0.001008 Jy/beam
! Clean residual mean=0.000000 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.249797 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 117 components and 0.249797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055882Jy  sigma=0.455273
! Fit after  self-cal, rms=0.055879Jy  sigma=0.455251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117936 Jy
! Component: 100  -  total flux cleaned = 0.000250429 Jy
! Component: 150  -  total flux cleaned = 0.000311261 Jy
! Component: 200  -  total flux cleaned = 0.000311372 Jy
! Total flux subtracted in 200 components = 0.000311372 Jy
! Clean residual min=-0.000937 max=0.000892 Jy/beam
! Clean residual mean=0.000000 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.250108 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 122 components and 0.250108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055863Jy  sigma=0.455100
! Fit after  self-cal, rms=0.055862Jy  sigma=0.455093
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055862Jy  sigma=0.455093
! Fit after  self-cal, rms=0.055677Jy  sigma=0.455051
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.17 mas, bmaj=2.611 mas, bpa=-0.826 degrees
! Estimated noise=0.517027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00061027 Jy
! Component: 100  -  total flux cleaned = 0.000748009 Jy
! Component: 150  -  total flux cleaned = 0.000902766 Jy
! Component: 200  -  total flux cleaned = 0.00100162 Jy
! Total flux subtracted in 200 components = 0.00100162 Jy
! Clean residual min=-0.000885 max=0.001155 Jy/beam
! Clean residual mean=0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.25111 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 139 components and 0.25111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055671Jy  sigma=0.454971
! Fit after  self-cal, rms=0.055669Jy  sigma=0.454964
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 45.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000879468 Jy
! Component: 100  -  total flux cleaned = 0.00103454 Jy
! Component: 150  -  total flux cleaned = 0.00109662 Jy
! Component: 200  -  total flux cleaned = 0.00106278 Jy
! Total flux subtracted in 200 components = 0.00106278 Jy
! Clean residual min=-0.000774 max=0.000772 Jy/beam
! Clean residual mean=0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.252173 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 174 components and 0.252173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055650Jy  sigma=0.454813
! Fit after  self-cal, rms=0.055650Jy  sigma=0.454802
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=1.675 mas, bpa=-4.247 degrees
! Estimated noise=0.432281 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9641 x 1.675 at -4.247 degrees (North through East)
! Clean map  min=-0.00077549  max=0.070556 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7545 mas, bmaj=1.35 mas, bpa=-6.136 degrees
! Estimated noise=0.965535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0667786 Jy
! Component: 100  -  total flux cleaned = 0.102028 Jy
! Component: 150  -  total flux cleaned = 0.126927 Jy
! Component: 200  -  total flux cleaned = 0.145738 Jy
! Total flux subtracted in 200 components = 0.145738 Jy
! Clean residual min=-0.006251 max=0.010941 Jy/beam
! Clean residual mean=-0.000007 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 0.145738 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.145738 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=1.675 mas, bpa=-4.247 degrees
! Estimated noise=0.432281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213566 Jy
! Component: 100  -  total flux cleaned = 0.0367247 Jy
! Component: 150  -  total flux cleaned = 0.0488921 Jy
! Component: 200  -  total flux cleaned = 0.0586696 Jy
! Total flux subtracted in 200 components = 0.0586696 Jy
! Clean residual min=-0.003396 max=0.005856 Jy/beam
! Clean residual mean=-0.000011 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.204407 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 51 components and 0.204408 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0079501 Jy
! Component: 100  -  total flux cleaned = 0.0144861 Jy
! Component: 150  -  total flux cleaned = 0.0198796 Jy
! Component: 200  -  total flux cleaned = 0.024343 Jy
! Total flux subtracted in 200 components = 0.024343 Jy
! Clean residual min=-0.002006 max=0.002742 Jy/beam
! Clean residual mean=-0.000005 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.228751 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 75 components and 0.228751 Jy
! Inverting map 
! Added new window around map position (1.2, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372139 Jy
! Component: 100  -  total flux cleaned = 0.00682953 Jy
! Component: 150  -  total flux cleaned = 0.00943228 Jy
! Component: 200  -  total flux cleaned = 0.0116147 Jy
! Total flux subtracted in 200 components = 0.0116147 Jy
! Clean residual min=-0.001311 max=0.001496 Jy/beam
! Clean residual mean=-0.000002 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.240365 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 93 components and 0.240365 Jy
! Inverting map 
! Added new window around map position (4.8, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187218 Jy
! Component: 100  -  total flux cleaned = 0.00344869 Jy
! Component: 150  -  total flux cleaned = 0.00476945 Jy
! Component: 200  -  total flux cleaned = 0.00564676 Jy
! Total flux subtracted in 200 components = 0.00564676 Jy
! Clean residual min=-0.001035 max=0.001115 Jy/beam
! Clean residual mean=-0.000001 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.246012 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 106 components and 0.246012 Jy
! Inverting map 
! Added new window around map position (8.6, -30.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102886 Jy
! Component: 100  -  total flux cleaned = 0.00171307 Jy
! Component: 150  -  total flux cleaned = 0.00229791 Jy
! Component: 200  -  total flux cleaned = 0.00276476 Jy
! Total flux subtracted in 200 components = 0.00276476 Jy
! Clean residual min=-0.000921 max=0.000914 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.248777 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 124 components and 0.248777 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.17 mas, bmaj=2.611 mas, bpa=-0.826 degrees
! Estimated noise=0.517027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109079 Jy
! Component: 100  -  total flux cleaned = 0.00153516 Jy
! Component: 150  -  total flux cleaned = 0.0019061 Jy
! Component: 200  -  total flux cleaned = 0.00218119 Jy
! Total flux subtracted in 200 components = 0.00218119 Jy
! Clean residual min=-0.000765 max=0.000723 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.250958 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229955 Jy
! Component: 100  -  total flux cleaned = 0.000421982 Jy
! Component: 150  -  total flux cleaned = 0.000527892 Jy
! Component: 200  -  total flux cleaned = 0.000560866 Jy
! Total flux subtracted in 200 components = 0.000560866 Jy
! Clean residual min=-0.000750 max=0.000689 Jy/beam
! Clean residual mean=0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.251519 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 181 components and 0.251519 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9641 mas, bmaj=1.675 mas, bpa=-4.247 degrees
! Estimated noise=0.432281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.16266e-05 Jy
! Component: 100  -  total flux cleaned = -0.000111477 Jy
! Component: 150  -  total flux cleaned = -0.000227534 Jy
! Component: 200  -  total flux cleaned = -0.000249696 Jy
! Total flux subtracted in 200 components = -0.000249696 Jy
! Clean residual min=-0.000866 max=0.000830 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.251269 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 200 components and 0.251269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055606Jy  sigma=0.454497
! Fit after  self-cal, rms=0.055585Jy  sigma=0.454398
wmodel J1022+3041_X_map.mod
! Writing 200 model components to file: J1022+3041_X_map.mod
wobs   J1022+3041_X_uvs.fits
! Writing UV FITS file: J1022+3041_X_uvs.fits
wwins  J1022+3041_X_map.win
! wwins: Wrote 10 windows to J1022+3041_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.21194e-05 Jy
! Component: 100  -  total flux cleaned = 4.93414e-05 Jy
! Component: 150  -  total flux cleaned = 3.58993e-05 Jy
! Component: 200  -  total flux cleaned = 3.58722e-05 Jy
! Component: 250  -  total flux cleaned = 8.69232e-05 Jy
! Component: 300  -  total flux cleaned = 8.65371e-05 Jy
! Component: 350  -  total flux cleaned = 6.18937e-05 Jy
! Component: 400  -  total flux cleaned = 6.18964e-05 Jy
! Component: 450  -  total flux cleaned = 9.69577e-05 Jy
! Component: 500  -  total flux cleaned = 9.65194e-05 Jy
! Component: 550  -  total flux cleaned = 8.49706e-05 Jy
! Component: 600  -  total flux cleaned = 8.50521e-05 Jy
! Component: 650  -  total flux cleaned = 8.52598e-05 Jy
! Component: 700  -  total flux cleaned = 0.000129036 Jy
! Component: 750  -  total flux cleaned = 0.000139757 Jy
! Component: 800  -  total flux cleaned = 0.000139645 Jy
! Component: 850  -  total flux cleaned = 0.000181864 Jy
! Component: 900  -  total flux cleaned = 0.00018179 Jy
! Component: 950  -  total flux cleaned = 0.000222875 Jy
! Component: 1000  -  total flux cleaned = 0.000192347 Jy
! Component: 1050  -  total flux cleaned = 0.000212624 Jy
! Component: 1100  -  total flux cleaned = 0.000222646 Jy
! Component: 1150  -  total flux cleaned = 0.000232527 Jy
! Component: 1200  -  total flux cleaned = 0.000213024 Jy
! Component: 1250  -  total flux cleaned = 0.000213074 Jy
! Component: 1300  -  total flux cleaned = 0.000213114 Jy
! Component: 1350  -  total flux cleaned = 0.000193857 Jy
! Component: 1400  -  total flux cleaned = 0.000184374 Jy
! Component: 1450  -  total flux cleaned = 0.000202996 Jy
! Component: 1500  -  total flux cleaned = 0.000165607 Jy
! Component: 1550  -  total flux cleaned = 0.000156377 Jy
! Component: 1600  -  total flux cleaned = 0.000183898 Jy
! Component: 1650  -  total flux cleaned = 0.000183886 Jy
! Component: 1700  -  total flux cleaned = 0.000156774 Jy
! Component: 1750  -  total flux cleaned = 0.000156694 Jy
! Component: 1800  -  total flux cleaned = 0.000174567 Jy
! Component: 1850  -  total flux cleaned = 0.000148013 Jy
! Component: 1900  -  total flux cleaned = 0.000148083 Jy
! Component: 1950  -  total flux cleaned = 0.00013049 Jy
! Component: 2000  -  total flux cleaned = 0.00013046 Jy
! Component: 2050  -  total flux cleaned = 0.000104517 Jy
! Component: 2100  -  total flux cleaned = 9.59604e-05 Jy
! Component: 2150  -  total flux cleaned = 9.60292e-05 Jy
! Component: 2200  -  total flux cleaned = 0.000104632 Jy
! Component: 2250  -  total flux cleaned = 0.000104591 Jy
! Component: 2300  -  total flux cleaned = 6.27515e-05 Jy
! Component: 2350  -  total flux cleaned = 7.93389e-05 Jy
! Component: 2400  -  total flux cleaned = 2.15089e-05 Jy
! Component: 2450  -  total flux cleaned = 3.79818e-05 Jy
! Component: 2500  -  total flux cleaned = 1.34485e-05 Jy
! Component: 2550  -  total flux cleaned = 5.22704e-06 Jy
! Component: 2600  -  total flux cleaned = -2.87366e-06 Jy
! Component: 2650  -  total flux cleaned = -6.70153e-05 Jy
! Component: 2700  -  total flux cleaned = -5.11085e-05 Jy
! Component: 2750  -  total flux cleaned = -5.10544e-05 Jy
! Component: 2800  -  total flux cleaned = -3.52529e-05 Jy
! Component: 2850  -  total flux cleaned = -5.87717e-05 Jy
! Component: 2900  -  total flux cleaned = -0.000105443 Jy
! Component: 2950  -  total flux cleaned = -0.000113192 Jy
! Component: 3000  -  total flux cleaned = -0.000128577 Jy
! Component: 3050  -  total flux cleaned = -0.000159225 Jy
! Component: 3100  -  total flux cleaned = -0.000182071 Jy
! Component: 3150  -  total flux cleaned = -0.00018207 Jy
! Component: 3200  -  total flux cleaned = -0.000219742 Jy
! Component: 3250  -  total flux cleaned = -0.00024224 Jy
! Component: 3300  -  total flux cleaned = -0.000249675 Jy
! Component: 3350  -  total flux cleaned = -0.000279416 Jy
! Component: 3400  -  total flux cleaned = -0.000264668 Jy
! Component: 3450  -  total flux cleaned = -0.000257324 Jy
! Component: 3500  -  total flux cleaned = -0.000271922 Jy
! Component: 3550  -  total flux cleaned = -0.000301063 Jy
! Component: 3600  -  total flux cleaned = -0.000330059 Jy
! Component: 3650  -  total flux cleaned = -0.000315572 Jy
! Component: 3700  -  total flux cleaned = -0.000293998 Jy
! Component: 3750  -  total flux cleaned = -0.000308233 Jy
! Component: 3800  -  total flux cleaned = -0.000322518 Jy
! Component: 3850  -  total flux cleaned = -0.000301276 Jy
! Component: 3900  -  total flux cleaned = -0.000308347 Jy
! Component: 3950  -  total flux cleaned = -0.00029427 Jy
! Component: 4000  -  total flux cleaned = -0.000294343 Jy
! Component: 4050  -  total flux cleaned = -0.000294359 Jy
! Total flux subtracted in 4096 components = -0.000287437 Jy
! Clean residual min=-0.000399 max=0.000386 Jy/beam
! Clean residual mean=0.000000 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.250982 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 490 components and 0.250982 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1022+3041_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9641 x 1.675 at -4.247 degrees (North through East)
! Clean map  min=-0.00064357  max=0.069591 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1022+3041_X_map.fits
wmodel /image_prod/ug002_uva//J1022+3041_X_map.mod
! Writing 490 model components to file: /image_prod/ug002_uva//J1022+3041_X_map.mod
wobs   /image_prod/ug002_uva//J1022+3041_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1022+3041_X_uvs.fits
wwins  /image_prod/ug002_uva//J1022+3041_X_map.win
! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1022+3041_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.069591 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000117525 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.506638 0.506638 1.01328 2.02655 4.0531 8.10621 16.2124 32.4248 64.8496
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.069 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  592.139 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1022+3041_X_dfm.log closed on Wed Mar  4 23:32:00 2020