! Started logfile: /image_prod/ug002_uva//J1019+6320_X_dfm.log on Wed Mar  4 23:31:01 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1019+6320_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1019+6320_X_uva.fits
! AN table 1: 80 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.896875 visibilities/baseline/integration-bin.
! Found source: J1019+6320
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 30996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1019+6320_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025718Jy  sigma=8.972931
! Fit after  self-cal, rms=0.775698Jy  sigma=6.740909
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7842 mas, bmaj=0.9709 mas, bpa=8.631 degrees
! Estimated noise=1.00245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.182059 Jy
! Component: 100  -  total flux cleaned = 0.221778 Jy
! Total flux subtracted in 100 components = 0.221778 Jy
! Clean residual min=-0.012542 max=0.015244 Jy/beam
! Clean residual mean=0.000006 rms=0.002466 Jy/beam
! Combined flux in latest and established models = 0.221778 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.221778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089551Jy  sigma=0.727510
! Fit after  self-cal, rms=0.089393Jy  sigma=0.726239
! Inverting map 
! Added new window around map position (-21.4, -14.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141492 Jy
! Component: 100  -  total flux cleaned = 0.0184434 Jy
! Total flux subtracted in 100 components = 0.0184434 Jy
! Clean residual min=-0.011503 max=0.014137 Jy/beam
! Clean residual mean=0.000007 rms=0.002268 Jy/beam
! Combined flux in latest and established models = 0.240221 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.240221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086648Jy  sigma=0.701178
! Fit after  self-cal, rms=0.086529Jy  sigma=0.700201
! Inverting map 
! Added new window around map position (-2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00951089 Jy
! Component: 100  -  total flux cleaned = 0.0127034 Jy
! Total flux subtracted in 100 components = 0.0127034 Jy
! Clean residual min=-0.010067 max=0.012733 Jy/beam
! Clean residual mean=0.000008 rms=0.002122 Jy/beam
! Combined flux in latest and established models = 0.252925 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 23 components and 0.252925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084890Jy  sigma=0.687071
! Fit after  self-cal, rms=0.084799Jy  sigma=0.686395
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=1.228 mas, bpa=16.24 degrees
! Estimated noise=0.465852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259549 Jy
! Component: 100  -  total flux cleaned = -4.77899e-07 Jy
! Component: 150  -  total flux cleaned = 0.000226161 Jy
! Component: 200  -  total flux cleaned = 0.000432796 Jy
! Total flux subtracted in 200 components = 0.000432796 Jy
! Clean residual min=-0.011526 max=0.011337 Jy/beam
! Clean residual mean=0.000017 rms=0.002398 Jy/beam
! Combined flux in latest and established models = 0.253357 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 32 components and 0.253357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083450Jy  sigma=0.675324
! Fit after  self-cal, rms=0.083388Jy  sigma=0.674967
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 1.228 at 16.24 degrees (North through East)
! Clean map  min=-0.010901  max=0.22849 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.07     HN        1.07     KP        0.98     
!   LA        0.93     MK        0.94     NL        1.08     OV        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.08     HN        1.05     KP        0.98     
!   LA        0.93     MK        0.97     NL        1.07     OV        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.07     HN        1.07     KP        0.99     
!   LA        0.94     MK        0.95     NL        1.08     OV        0.94     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.07     HN        1.04     KP        0.99     
!   LA        0.92     MK        0.96     NL        1.09     OV        0.94     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.07     HN        1.07     KP        0.98     
!   LA        0.93     MK        0.98     NL        1.09     OV        0.95     
!   SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.07     HN        1.09     KP        0.99     
!   LA        0.92     MK        0.96     NL        1.09     OV        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.08     HN        1.05     KP        0.99     
!   LA        0.92     MK        0.97     NL        1.10     OV        0.94     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.06     HN        1.05     KP        1.00     
!   LA        0.91     MK        0.96     NL        1.11     OV        0.95     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.09     HN        1.02     KP        0.98     
!   LA        0.93     MK        0.96     NL        1.10     OV        0.94     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.08     HN        1.04     KP        0.98     
!   LA        0.95     MK        0.97     NL        1.11     OV        0.93     
!   SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.07     HN        1.06     KP        0.99     
!   LA        0.93     MK        0.96     NL        1.11     OV        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.07     HN        1.07     KP        0.99     
!   LA        0.95     MK        0.95     NL        1.10     OV        0.96     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.083388Jy  sigma=0.674967
! Fit after  self-cal, rms=0.081634Jy  sigma=0.650619
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=1.222 mas, bpa=16.64 degrees
! Estimated noise=0.456176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0059004 Jy
! Component: 100  -  total flux cleaned = -0.00792044 Jy
! Component: 150  -  total flux cleaned = -0.00834435 Jy
! Component: 200  -  total flux cleaned = -0.0088629 Jy
! Total flux subtracted in 200 components = -0.0088629 Jy
! Clean residual min=-0.009276 max=0.009662 Jy/beam
! Clean residual mean=0.000016 rms=0.002099 Jy/beam
! Combined flux in latest and established models = 0.244495 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 41 components and 0.244494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080895Jy  sigma=0.645535
! Fit after  self-cal, rms=0.080876Jy  sigma=0.645119
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080876Jy  sigma=0.645119
! Fit after  self-cal, rms=0.101773Jy  sigma=0.519106
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=1.237 mas, bpa=13.85 degrees
! Estimated noise=0.462777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00442385 Jy
! Component: 100  -  total flux cleaned = -0.00455236 Jy
! Component: 150  -  total flux cleaned = -0.00454925 Jy
! Component: 200  -  total flux cleaned = -0.00475891 Jy
! Total flux subtracted in 200 components = -0.00475891 Jy
! Clean residual min=-0.002723 max=0.002484 Jy/beam
! Clean residual mean=0.000002 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.239736 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 46 components and 0.239736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101341Jy  sigma=0.513227
! Fit after  self-cal, rms=0.102002Jy  sigma=0.512085
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00092451 Jy
! Component: 100  -  total flux cleaned = -0.00101354 Jy
! Component: 150  -  total flux cleaned = -0.00117735 Jy
! Component: 200  -  total flux cleaned = -0.00125153 Jy
! Total flux subtracted in 200 components = -0.00125153 Jy
! Clean residual min=-0.002278 max=0.002211 Jy/beam
! Clean residual mean=0.000002 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.238484 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 50 components and 0.238484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101853Jy  sigma=0.510040
! Fit after  self-cal, rms=0.101876Jy  sigma=0.509967
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101876Jy  sigma=0.509967
! Fit after  self-cal, rms=0.107484Jy  sigma=0.508847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.237 mas, bpa=13.3 degrees
! Estimated noise=0.461934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0016717 Jy
! Component: 100  -  total flux cleaned = -0.00185441 Jy
! Component: 150  -  total flux cleaned = -0.00201789 Jy
! Component: 200  -  total flux cleaned = -0.0020943 Jy
! Total flux subtracted in 200 components = -0.0020943 Jy
! Clean residual min=-0.001966 max=0.001801 Jy/beam
! Clean residual mean=0.000001 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.23639 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 50 components and 0.23639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107317Jy  sigma=0.506818
! Fit after  self-cal, rms=0.107410Jy  sigma=0.506726
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000500613 Jy
! Component: 100  -  total flux cleaned = -0.000564352 Jy
! Component: 150  -  total flux cleaned = -0.000623548 Jy
! Component: 200  -  total flux cleaned = -0.000679691 Jy
! Total flux subtracted in 200 components = -0.000679691 Jy
! Clean residual min=-0.001804 max=0.001662 Jy/beam
! Clean residual mean=0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.23571 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 52 components and 0.23571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107331Jy  sigma=0.505754
! Fit after  self-cal, rms=0.107350Jy  sigma=0.505728
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107350Jy  sigma=0.505728
! Fit after  self-cal, rms=0.110674Jy  sigma=0.505355
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.189 mas, bmaj=2.331 mas, bpa=62.96 degrees
! Estimated noise=0.585021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000599125 Jy
! Component: 100  -  total flux cleaned = -0.000678095 Jy
! Component: 150  -  total flux cleaned = -0.000709795 Jy
! Component: 200  -  total flux cleaned = -0.000709711 Jy
! Total flux subtracted in 200 components = -0.000709711 Jy
! Clean residual min=-0.001355 max=0.001396 Jy/beam
! Clean residual mean=0.000002 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.235 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110633Jy  sigma=0.504896
! Fit after  self-cal, rms=0.110691Jy  sigma=0.504863
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000185504 Jy
! Component: 100  -  total flux cleaned = -0.000211829 Jy
! Component: 150  -  total flux cleaned = -0.000237342 Jy
! Component: 200  -  total flux cleaned = -0.000261256 Jy
! Total flux subtracted in 200 components = -0.000261256 Jy
! Clean residual min=-0.001345 max=0.001377 Jy/beam
! Clean residual mean=0.000002 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.234739 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 58 components and 0.234739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110664Jy  sigma=0.504603
! Fit after  self-cal, rms=0.110675Jy  sigma=0.504595
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=1.238 mas, bpa=12.79 degrees
! Estimated noise=0.461283 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.01 x 1.238 at 12.79 degrees (North through East)
! Clean map  min=-0.0016802  max=0.22763 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7618 mas, bmaj=0.9681 mas, bpa=8.201 degrees
! Estimated noise=0.978451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.177743 Jy
! Component: 100  -  total flux cleaned = 0.216502 Jy
! Component: 150  -  total flux cleaned = 0.225954 Jy
! Component: 200  -  total flux cleaned = 0.230361 Jy
! Total flux subtracted in 200 components = 0.230361 Jy
! Clean residual min=-0.003138 max=0.002981 Jy/beam
! Clean residual mean=-0.000003 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.230361 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.230361 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=1.238 mas, bpa=12.79 degrees
! Estimated noise=0.461283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275594 Jy
! Component: 100  -  total flux cleaned = 0.00311783 Jy
! Component: 150  -  total flux cleaned = 0.00342281 Jy
! Component: 200  -  total flux cleaned = 0.00369062 Jy
! Total flux subtracted in 200 components = 0.00369062 Jy
! Clean residual min=-0.001472 max=0.001507 Jy/beam
! Clean residual mean=0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.234052 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 27 components and 0.234052 Jy
! Inverting map 
! Added new window around map position (-46, -19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539206 Jy
! Component: 100  -  total flux cleaned = 0.000448655 Jy
! Component: 150  -  total flux cleaned = 0.000364033 Jy
! Component: 200  -  total flux cleaned = 0.000284614 Jy
! Total flux subtracted in 200 components = 0.000284614 Jy
! Clean residual min=-0.001460 max=0.001390 Jy/beam
! Clean residual mean=0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.234337 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 40 components and 0.234337 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.189 mas, bmaj=2.331 mas, bpa=62.96 degrees
! Estimated noise=0.585021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00054946 Jy
! Component: 100  -  total flux cleaned = 0.000526277 Jy
! Component: 150  -  total flux cleaned = 0.000545218 Jy
! Component: 200  -  total flux cleaned = 0.0005794 Jy
! Total flux subtracted in 200 components = 0.0005794 Jy
! Clean residual min=-0.001369 max=0.001411 Jy/beam
! Clean residual mean=0.000002 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.234916 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.54144e-05 Jy
! Component: 100  -  total flux cleaned = 4.50251e-05 Jy
! Component: 150  -  total flux cleaned = 5.87207e-05 Jy
! Component: 200  -  total flux cleaned = 8.43108e-05 Jy
! Total flux subtracted in 200 components = 8.43108e-05 Jy
! Clean residual min=-0.001369 max=0.001377 Jy/beam
! Clean residual mean=0.000002 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.235 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.235 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=1.238 mas, bpa=12.79 degrees
! Estimated noise=0.461283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000180786 Jy
! Component: 100  -  total flux cleaned = -0.000213348 Jy
! Component: 150  -  total flux cleaned = -0.000272845 Jy
! Component: 200  -  total flux cleaned = -0.000299824 Jy
! Total flux subtracted in 200 components = -0.000299824 Jy
! Clean residual min=-0.001488 max=0.001291 Jy/beam
! Clean residual mean=0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.234701 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.234701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110520Jy  sigma=0.503027
! Fit after  self-cal, rms=0.110570Jy  sigma=0.502741
wmodel J1019+6320_X_map.mod
! Writing 61 model components to file: J1019+6320_X_map.mod
wobs   J1019+6320_X_uvs.fits
! Writing UV FITS file: J1019+6320_X_uvs.fits
wwins  J1019+6320_X_map.win
! wwins: Wrote 4 windows to J1019+6320_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000583899 Jy
! Component: 100  -  total flux cleaned = -0.00065726 Jy
! Component: 150  -  total flux cleaned = -0.000591496 Jy
! Component: 200  -  total flux cleaned = -0.00048482 Jy
! Component: 250  -  total flux cleaned = -0.000318978 Jy
! Component: 300  -  total flux cleaned = -0.000156831 Jy
! Component: 350  -  total flux cleaned = -1.76266e-05 Jy
! Component: 400  -  total flux cleaned = 0.000138675 Jy
! Component: 450  -  total flux cleaned = 0.000234377 Jy
! Component: 500  -  total flux cleaned = 0.000291236 Jy
! Component: 550  -  total flux cleaned = 0.000384884 Jy
! Component: 600  -  total flux cleaned = 0.000477258 Jy
! Component: 650  -  total flux cleaned = 0.000550304 Jy
! Component: 700  -  total flux cleaned = 0.000622087 Jy
! Component: 750  -  total flux cleaned = 0.000675142 Jy
! Component: 800  -  total flux cleaned = 0.000727683 Jy
! Component: 850  -  total flux cleaned = 0.000848698 Jy
! Component: 900  -  total flux cleaned = 0.000882895 Jy
! Component: 950  -  total flux cleaned = 0.000967499 Jy
! Component: 1000  -  total flux cleaned = 0.00111806 Jy
! Component: 1050  -  total flux cleaned = 0.00113433 Jy
! Component: 1100  -  total flux cleaned = 0.00119993 Jy
! Component: 1150  -  total flux cleaned = 0.00126493 Jy
! Component: 1200  -  total flux cleaned = 0.0012972 Jy
! Component: 1250  -  total flux cleaned = 0.00132901 Jy
! Component: 1300  -  total flux cleaned = 0.00142394 Jy
! Component: 1350  -  total flux cleaned = 0.00147083 Jy
! Component: 1400  -  total flux cleaned = 0.00153291 Jy
! Component: 1450  -  total flux cleaned = 0.00160987 Jy
! Component: 1500  -  total flux cleaned = 0.00165552 Jy
! Component: 1550  -  total flux cleaned = 0.00173146 Jy
! Component: 1600  -  total flux cleaned = 0.00173142 Jy
! Component: 1650  -  total flux cleaned = 0.00188055 Jy
! Component: 1700  -  total flux cleaned = 0.0019545 Jy
! Component: 1750  -  total flux cleaned = 0.00196917 Jy
! Component: 1800  -  total flux cleaned = 0.00198367 Jy
! Component: 1850  -  total flux cleaned = 0.00207071 Jy
! Component: 1900  -  total flux cleaned = 0.00207072 Jy
! Component: 1950  -  total flux cleaned = 0.00208504 Jy
! Component: 2000  -  total flux cleaned = 0.00214184 Jy
! Component: 2050  -  total flux cleaned = 0.00216981 Jy
! Component: 2100  -  total flux cleaned = 0.00218386 Jy
! Component: 2150  -  total flux cleaned = 0.00225343 Jy
! Component: 2200  -  total flux cleaned = 0.0022396 Jy
! Component: 2250  -  total flux cleaned = 0.00232201 Jy
! Component: 2300  -  total flux cleaned = 0.00233564 Jy
! Component: 2350  -  total flux cleaned = 0.00234922 Jy
! Component: 2400  -  total flux cleaned = 0.00241682 Jy
! Component: 2450  -  total flux cleaned = 0.0024571 Jy
! Component: 2500  -  total flux cleaned = 0.0025239 Jy
! Component: 2550  -  total flux cleaned = 0.00255049 Jy
! Component: 2600  -  total flux cleaned = 0.00259002 Jy
! Component: 2650  -  total flux cleaned = 0.00261631 Jy
! Component: 2700  -  total flux cleaned = 0.0026686 Jy
! Component: 2750  -  total flux cleaned = 0.00270755 Jy
! Component: 2800  -  total flux cleaned = 0.00272048 Jy
! Component: 2850  -  total flux cleaned = 0.00277192 Jy
! Component: 2900  -  total flux cleaned = 0.0027847 Jy
! Component: 2950  -  total flux cleaned = 0.00283566 Jy
! Component: 3000  -  total flux cleaned = 0.00286101 Jy
! Component: 3050  -  total flux cleaned = 0.00294929 Jy
! Component: 3100  -  total flux cleaned = 0.00298701 Jy
! Component: 3150  -  total flux cleaned = 0.00301204 Jy
! Component: 3200  -  total flux cleaned = 0.00311158 Jy
! Component: 3250  -  total flux cleaned = 0.00312395 Jy
! Component: 3300  -  total flux cleaned = 0.00318553 Jy
! Component: 3350  -  total flux cleaned = 0.00324699 Jy
! Component: 3400  -  total flux cleaned = 0.0033204 Jy
! Component: 3450  -  total flux cleaned = 0.00335686 Jy
! Component: 3500  -  total flux cleaned = 0.00349013 Jy
! Component: 3550  -  total flux cleaned = 0.00350217 Jy
! Component: 3600  -  total flux cleaned = 0.00352621 Jy
! Component: 3650  -  total flux cleaned = 0.00361003 Jy
! Component: 3700  -  total flux cleaned = 0.00364568 Jy
! Component: 3750  -  total flux cleaned = 0.00371678 Jy
! Component: 3800  -  total flux cleaned = 0.00375227 Jy
! Component: 3850  -  total flux cleaned = 0.00378762 Jy
! Component: 3900  -  total flux cleaned = 0.00381105 Jy
! Component: 3950  -  total flux cleaned = 0.00384616 Jy
! Component: 4000  -  total flux cleaned = 0.00391611 Jy
! Component: 4050  -  total flux cleaned = 0.00392773 Jy
! Total flux subtracted in 4096 components = 0.00399716 Jy
! Clean residual min=-0.000664 max=0.000607 Jy/beam
! Clean residual mean=0.000001 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.238698 Jy
keep
! Adding 301 model components to the UV plane model.
! The established model now contains 362 components and 0.238698 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1019+6320_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.01 x 1.238 at 12.79 degrees (North through East)
! Clean map  min=-0.0011547  max=0.2278 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1019+6320_X_map.fits
wmodel /image_prod/ug002_uva//J1019+6320_X_map.mod
! Writing 362 model components to file: /image_prod/ug002_uva//J1019+6320_X_map.mod
wobs   /image_prod/ug002_uva//J1019+6320_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1019+6320_X_uvs.fits
wwins  /image_prod/ug002_uva//J1019+6320_X_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1019+6320_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.227799 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000192469 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.253472 0.253472 0.506943 1.01389 2.02777 4.05555 8.1111 16.2222 32.4444 64.8888
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.227 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1183.56 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1019+6320_X_dfm.log closed on Wed Mar  4 23:31:05 2020