! Started logfile: /image_prod/ug002_uva//J1017+6116_S_b_dfm.log on Wed Mar  4 23:30:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1017+6116_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1017+6116_S_b_uva.fits
! AN table 1: 8 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.944444 visibilities/baseline/integration-bin.
! Found source: J1017+6116
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 816 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1017+6116_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.285070Jy  sigma=13.143525
! Fit after  self-cal, rms=0.437959Jy  sigma=4.622208
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.546 mas, bmaj=12.58 mas, bpa=5.875 degrees
! Estimated noise=3.17287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.508587 Jy
! Component: 100  -  total flux cleaned = 0.58287 Jy
! Total flux subtracted in 100 components = 0.58287 Jy
! Clean residual min=-0.095458 max=0.075947 Jy/beam
! Clean residual mean=0.000077 rms=0.023925 Jy/beam
! Combined flux in latest and established models = 0.582871 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.582871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.294691Jy  sigma=2.510742
! Fit after  self-cal, rms=0.294669Jy  sigma=2.510522
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.02 mas, bmaj=12.68 mas, bpa=5.059 degrees
! Estimated noise=2.49991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00980004 Jy
! Component: 100  -  total flux cleaned = 0.00219878 Jy
! Component: 150  -  total flux cleaned = -0.00595764 Jy
! Component: 200  -  total flux cleaned = -0.0140993 Jy
! Total flux subtracted in 200 components = -0.0140993 Jy
! Clean residual min=-0.067952 max=0.066598 Jy/beam
! Clean residual mean=0.000113 rms=0.017165 Jy/beam
! Combined flux in latest and established models = 0.568771 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 20 components and 0.568771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.241878Jy  sigma=2.090980
! Fit after  self-cal, rms=0.241783Jy  sigma=2.090535
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.02 x 12.68 at 5.059 degrees (North through East)
! Clean map  min=-0.067611  max=0.66273 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     KP        1.00     LA        0.98     
!   MK        0.99     NL        1.36     OV        0.96     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.54     FD        1.01     KP        1.35     LA        1.01     
!   MK        0.96     NL        1.36     OV        0.92     PT        0.99     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        1.00     KP        1.12     LA        0.97     
!   MK        1.01     NL        1.19     OV        0.93     PT        0.96     
!   SC        1.09     
! 
! 
! Fit before self-cal, rms=0.241783Jy  sigma=2.090535
! Fit after  self-cal, rms=0.113192Jy  sigma=0.886391
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.045 mas, bmaj=11.95 mas, bpa=5.767 degrees
! Estimated noise=2.45897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (22.5, -50.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0227135 Jy
! Component: 100  -  total flux cleaned = 0.0256892 Jy
! Component: 150  -  total flux cleaned = 0.0256459 Jy
! Component: 200  -  total flux cleaned = 0.0260264 Jy
! Total flux subtracted in 200 components = 0.0260264 Jy
! Clean residual min=-0.013792 max=0.016413 Jy/beam
! Clean residual mean=-0.000010 rms=0.003796 Jy/beam
! Combined flux in latest and established models = 0.594798 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 50 components and 0.594798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104767Jy  sigma=0.797904
! Fit after  self-cal, rms=0.104998Jy  sigma=0.792898
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104998Jy  sigma=0.792898
! Fit after  self-cal, rms=0.102048Jy  sigma=0.785766
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.05 mas, bmaj=11.88 mas, bpa=5.772 degrees
! Estimated noise=2.4531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0074112 Jy
! Component: 100  -  total flux cleaned = 0.00742183 Jy
! Component: 150  -  total flux cleaned = 0.00712245 Jy
! Component: 200  -  total flux cleaned = 0.00685096 Jy
! Total flux subtracted in 200 components = 0.00685096 Jy
! Clean residual min=-0.011474 max=0.012996 Jy/beam
! Clean residual mean=-0.000012 rms=0.003143 Jy/beam
! Combined flux in latest and established models = 0.601649 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 84 components and 0.601649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099492Jy  sigma=0.762533
! Fit after  self-cal, rms=0.099417Jy  sigma=0.761908
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00136381 Jy
! Component: 100  -  total flux cleaned = -0.00159462 Jy
! Component: 150  -  total flux cleaned = -0.00137319 Jy
! Component: 200  -  total flux cleaned = -0.000343945 Jy
! Total flux subtracted in 200 components = -0.000343945 Jy
! Clean residual min=-0.010328 max=0.011381 Jy/beam
! Clean residual mean=-0.000013 rms=0.002879 Jy/beam
! Combined flux in latest and established models = 0.601305 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 99 components and 0.601305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098071Jy  sigma=0.752090
! Fit after  self-cal, rms=0.098041Jy  sigma=0.751810
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098041Jy  sigma=0.751810
! Fit after  self-cal, rms=0.096379Jy  sigma=0.748453
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.06 mas, bmaj=11.83 mas, bpa=5.776 degrees
! Estimated noise=2.45541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501961 Jy
! Component: 100  -  total flux cleaned = 0.0048256 Jy
! Component: 150  -  total flux cleaned = 0.00501427 Jy
! Component: 200  -  total flux cleaned = 0.00501463 Jy
! Total flux subtracted in 200 components = 0.00501463 Jy
! Clean residual min=-0.009185 max=0.010361 Jy/beam
! Clean residual mean=-0.000013 rms=0.002564 Jy/beam
! Combined flux in latest and established models = 0.606319 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 0.606319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095200Jy  sigma=0.739642
! Fit after  self-cal, rms=0.095189Jy  sigma=0.739504
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000356031 Jy
! Component: 100  -  total flux cleaned = -0.000194923 Jy
! Component: 150  -  total flux cleaned = -4.55569e-05 Jy
! Component: 200  -  total flux cleaned = 0.000385097 Jy
! Total flux subtracted in 200 components = 0.000385097 Jy
! Clean residual min=-0.008674 max=0.009547 Jy/beam
! Clean residual mean=-0.000013 rms=0.002434 Jy/beam
! Combined flux in latest and established models = 0.606704 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 124 components and 0.606704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094507Jy  sigma=0.735370
! Fit after  self-cal, rms=0.094505Jy  sigma=0.735245
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094505Jy  sigma=0.735245
! Fit after  self-cal, rms=0.093466Jy  sigma=0.733138
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.949 mas, bmaj=11.88 mas, bpa=16.1 degrees
! Estimated noise=3.042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00518961 Jy
! Component: 100  -  total flux cleaned = 0.00500128 Jy
! Component: 150  -  total flux cleaned = 0.00500094 Jy
! Component: 200  -  total flux cleaned = 0.00460681 Jy
! Total flux subtracted in 200 components = 0.00460681 Jy
! Clean residual min=-0.009439 max=0.009711 Jy/beam
! Clean residual mean=-0.000027 rms=0.002613 Jy/beam
! Combined flux in latest and established models = 0.611311 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 139 components and 0.611311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092907Jy  sigma=0.729826
! Fit after  self-cal, rms=0.092940Jy  sigma=0.729567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101906 Jy
! Component: 100  -  total flux cleaned = -0.0013553 Jy
! Component: 150  -  total flux cleaned = -0.0014546 Jy
! Component: 200  -  total flux cleaned = -0.0012668 Jy
! Total flux subtracted in 200 components = -0.0012668 Jy
! Clean residual min=-0.009018 max=0.009153 Jy/beam
! Clean residual mean=-0.000023 rms=0.002493 Jy/beam
! Combined flux in latest and established models = 0.610044 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 148 components and 0.610045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092688Jy  sigma=0.728407
! Fit after  self-cal, rms=0.092698Jy  sigma=0.728299
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.067 mas, bmaj=11.79 mas, bpa=5.781 degrees
! Estimated noise=2.46033 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.067 x 11.79 at 5.781 degrees (North through East)
! Clean map  min=-0.02321  max=0.65592 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092698Jy  sigma=0.728299
! Fit after  self-cal, rms=0.087167Jy  sigma=0.679074
! Inverting map and beam 
! Estimated beam: bmin=3.073 mas, bmaj=11.74 mas, bpa=5.784 degrees
! Estimated noise=2.4636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0046159 Jy
! Component: 100  -  total flux cleaned = 0.00567079 Jy
! Component: 150  -  total flux cleaned = 0.00577484 Jy
! Component: 200  -  total flux cleaned = 0.0058694 Jy
! Total flux subtracted in 200 components = 0.0058694 Jy
! Clean residual min=-0.007706 max=0.007501 Jy/beam
! Clean residual mean=-0.000012 rms=0.001918 Jy/beam
! Combined flux in latest and established models = 0.615914 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 162 components and 0.615914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086573Jy  sigma=0.675445
! Fit after  self-cal, rms=0.086540Jy  sigma=0.675364
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.57695e-05 Jy
! Component: 100  -  total flux cleaned = 0.000332735 Jy
! Component: 150  -  total flux cleaned = 0.000413062 Jy
! Component: 200  -  total flux cleaned = 0.000565343 Jy
! Total flux subtracted in 200 components = 0.000565343 Jy
! Clean residual min=-0.007710 max=0.007178 Jy/beam
! Clean residual mean=-0.000013 rms=0.001881 Jy/beam
! Combined flux in latest and established models = 0.616479 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 171 components and 0.616479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086322Jy  sigma=0.674164
! Fit after  self-cal, rms=0.086310Jy  sigma=0.674123
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086310Jy  sigma=0.674123
! Fit after  self-cal, rms=0.085819Jy  sigma=0.672627
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.591 mas, bmaj=11.63 mas, bpa=6.596 degrees
! Estimated noise=3.10054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.496894 Jy
! Component: 100  -  total flux cleaned = 0.61382 Jy
! Component: 150  -  total flux cleaned = 0.624936 Jy
! Component: 200  -  total flux cleaned = 0.627192 Jy
! Total flux subtracted in 200 components = 0.627192 Jy
! Clean residual min=-0.029141 max=0.023476 Jy/beam
! Clean residual mean=0.000008 rms=0.006915 Jy/beam
! Combined flux in latest and established models = 0.627191 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.627191 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.078 mas, bmaj=11.7 mas, bpa=5.786 degrees
! Estimated noise=2.46689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00806483 Jy
! Component: 100  -  total flux cleaned = -0.0117121 Jy
! Component: 150  -  total flux cleaned = -0.0131185 Jy
! Component: 200  -  total flux cleaned = -0.0136274 Jy
! Total flux subtracted in 200 components = -0.0136274 Jy
! Clean residual min=-0.015953 max=0.013272 Jy/beam
! Clean residual mean=0.000004 rms=0.004065 Jy/beam
! Combined flux in latest and established models = 0.613564 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 39 components and 0.613564 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.938 mas, bmaj=11.8 mas, bpa=16.22 degrees
! Estimated noise=3.04659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00243233 Jy
! Component: 100  -  total flux cleaned = -0.00154267 Jy
! Component: 150  -  total flux cleaned = -0.00158789 Jy
! Component: 200  -  total flux cleaned = -0.00132699 Jy
! Total flux subtracted in 200 components = -0.00132699 Jy
! Clean residual min=-0.014364 max=0.010293 Jy/beam
! Clean residual mean=-0.000002 rms=0.003616 Jy/beam
! Combined flux in latest and established models = 0.612237 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245764 Jy
! Component: 100  -  total flux cleaned = 0.000470062 Jy
! Component: 150  -  total flux cleaned = 0.00046867 Jy
! Component: 200  -  total flux cleaned = 0.000671948 Jy
! Total flux subtracted in 200 components = 0.000671948 Jy
! Clean residual min=-0.012761 max=0.009904 Jy/beam
! Clean residual mean=-0.000006 rms=0.003216 Jy/beam
! Combined flux in latest and established models = 0.612909 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 71 components and 0.612909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.078 mas, bmaj=11.7 mas, bpa=5.786 degrees
! Estimated noise=2.46689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0026206 Jy
! Component: 100  -  total flux cleaned = -0.00237338 Jy
! Component: 150  -  total flux cleaned = -0.00137221 Jy
! Component: 200  -  total flux cleaned = -2.68602e-05 Jy
! Total flux subtracted in 200 components = -2.68602e-05 Jy
! Clean residual min=-0.011625 max=0.009100 Jy/beam
! Clean residual mean=-0.000004 rms=0.002692 Jy/beam
! Combined flux in latest and established models = 0.612882 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 92 components and 0.612882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088342Jy  sigma=0.701674
! Fit after  self-cal, rms=0.088161Jy  sigma=0.698809
wmodel J1017+6116_S_b_map.mod
! Writing 92 model components to file: J1017+6116_S_b_map.mod
wobs   J1017+6116_S_b_uvs.fits
! Writing UV FITS file: J1017+6116_S_b_uvs.fits
wwins  J1017+6116_S_b_map.win
! wwins: Wrote 2 windows to J1017+6116_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0051723 Jy
! Component: 100  -  total flux cleaned = -0.00880151 Jy
! Component: 150  -  total flux cleaned = -0.011359 Jy
! Component: 200  -  total flux cleaned = -0.0131226 Jy
! Component: 250  -  total flux cleaned = -0.0149898 Jy
! Component: 300  -  total flux cleaned = -0.0162717 Jy
! Component: 350  -  total flux cleaned = -0.0173777 Jy
! Component: 400  -  total flux cleaned = -0.0184247 Jy
! Component: 450  -  total flux cleaned = -0.0195167 Jy
! Component: 500  -  total flux cleaned = -0.0202728 Jy
! Component: 550  -  total flux cleaned = -0.0206349 Jy
! Component: 600  -  total flux cleaned = -0.0213319 Jy
! Component: 650  -  total flux cleaned = -0.0218335 Jy
! Component: 700  -  total flux cleaned = -0.0224821 Jy
! Component: 750  -  total flux cleaned = -0.0231111 Jy
! Component: 800  -  total flux cleaned = -0.023795 Jy
! Component: 850  -  total flux cleaned = -0.0244561 Jy
! Component: 900  -  total flux cleaned = -0.025026 Jy
! Component: 950  -  total flux cleaned = -0.0254426 Jy
! Component: 1000  -  total flux cleaned = -0.0259145 Jy
! Component: 1050  -  total flux cleaned = -0.0264384 Jy
! Component: 1100  -  total flux cleaned = -0.0268851 Jy
! Component: 1150  -  total flux cleaned = -0.0273202 Jy
! Component: 1200  -  total flux cleaned = -0.0278051 Jy
! Component: 1250  -  total flux cleaned = -0.0282789 Jy
! Component: 1300  -  total flux cleaned = -0.0287993 Jy
! Component: 1350  -  total flux cleaned = -0.0292516 Jy
! Component: 1400  -  total flux cleaned = -0.0297502 Jy
! Component: 1450  -  total flux cleaned = -0.0301295 Jy
! Component: 1500  -  total flux cleaned = -0.0306071 Jy
! Component: 1550  -  total flux cleaned = -0.031128 Jy
! Component: 1600  -  total flux cleaned = -0.0317408 Jy
! Component: 1650  -  total flux cleaned = -0.0322424 Jy
! Component: 1700  -  total flux cleaned = -0.032685 Jy
! Component: 1750  -  total flux cleaned = -0.0332655 Jy
! Component: 1800  -  total flux cleaned = -0.0337413 Jy
! Component: 1850  -  total flux cleaned = -0.0342555 Jy
! Component: 1900  -  total flux cleaned = -0.0347605 Jy
! Component: 1950  -  total flux cleaned = -0.0352126 Jy
! Component: 2000  -  total flux cleaned = -0.0357463 Jy
! Component: 2050  -  total flux cleaned = -0.0363146 Jy
! Component: 2100  -  total flux cleaned = -0.0367021 Jy
! Component: 2150  -  total flux cleaned = -0.0371266 Jy
! Component: 2200  -  total flux cleaned = -0.0376706 Jy
! Component: 2250  -  total flux cleaned = -0.0381232 Jy
! Component: 2300  -  total flux cleaned = -0.0385293 Jy
! Component: 2350  -  total flux cleaned = -0.0388494 Jy
! Component: 2400  -  total flux cleaned = -0.0391656 Jy
! Component: 2450  -  total flux cleaned = -0.0396333 Jy
! Component: 2500  -  total flux cleaned = -0.0400181 Jy
! Component: 2550  -  total flux cleaned = -0.0403617 Jy
! Component: 2600  -  total flux cleaned = -0.0408899 Jy
! Component: 2650  -  total flux cleaned = -0.0413006 Jy
! Component: 2700  -  total flux cleaned = -0.0417072 Jy
! Component: 2750  -  total flux cleaned = -0.0421098 Jy
! Component: 2800  -  total flux cleaned = -0.0425086 Jy
! Component: 2850  -  total flux cleaned = -0.0429042 Jy
! Component: 2900  -  total flux cleaned = -0.043225 Jy
! Component: 2950  -  total flux cleaned = -0.0435429 Jy
! Component: 3000  -  total flux cleaned = -0.0438934 Jy
! Component: 3050  -  total flux cleaned = -0.0442414 Jy
! Component: 3100  -  total flux cleaned = -0.0445525 Jy
! Component: 3150  -  total flux cleaned = -0.0448952 Jy
! Component: 3200  -  total flux cleaned = -0.0452355 Jy
! Component: 3250  -  total flux cleaned = -0.0455393 Jy
! Component: 3300  -  total flux cleaned = -0.0458748 Jy
! Component: 3350  -  total flux cleaned = -0.0462411 Jy
! Component: 3400  -  total flux cleaned = -0.0465387 Jy
! Component: 3450  -  total flux cleaned = -0.0468347 Jy
! Component: 3500  -  total flux cleaned = -0.0472267 Jy
! Component: 3550  -  total flux cleaned = -0.0476166 Jy
! Component: 3600  -  total flux cleaned = -0.047907 Jy
! Component: 3650  -  total flux cleaned = -0.0480996 Jy
! Component: 3700  -  total flux cleaned = -0.0483556 Jy
! Component: 3750  -  total flux cleaned = -0.0485468 Jy
! Component: 3800  -  total flux cleaned = -0.0488324 Jy
! Component: 3850  -  total flux cleaned = -0.0489904 Jy
! Component: 3900  -  total flux cleaned = -0.0492739 Jy
! Component: 3950  -  total flux cleaned = -0.049462 Jy
! Component: 4000  -  total flux cleaned = -0.049712 Jy
! Component: 4050  -  total flux cleaned = -0.0499611 Jy
! Total flux subtracted in 4096 components = -0.0501163 Jy
! Clean residual min=-0.001953 max=0.002670 Jy/beam
! Clean residual mean=-0.000003 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.562765 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 403 components and 0.562765 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1017+6116_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.078 x 11.7 at 5.786 degrees (North through East)
! Clean map  min=-0.022815  max=0.64943 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1017+6116_S_b_map.fits
wmodel /image_prod/ug002_uva//J1017+6116_S_b_map.mod
! Writing 403 model components to file: /image_prod/ug002_uva//J1017+6116_S_b_map.mod
wobs   /image_prod/ug002_uva//J1017+6116_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1017+6116_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J1017+6116_S_b_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1017+6116_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.649431 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000543317 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.250981 0.250981 0.501963 1.00393 2.00785 4.0157 8.0314 16.0628 32.1256 64.2512
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.649 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1195.31 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1017+6116_S_b_dfm.log closed on Wed Mar  4 23:30:13 2020