! Started logfile: /image_prod/ug002_uva//J1013+4918_S_dfm.log on Wed Mar  4 23:28:05 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1013+4918_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1013+4918_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.987037 visibilities/baseline/integration-bin.
! Found source: J1013+4918
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7995 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1013+4918_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009139Jy  sigma=9.006765
! Fit after  self-cal, rms=0.864155Jy  sigma=7.623746
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.186 mas, bmaj=4.62 mas, bpa=9.741 degrees
! Estimated noise=1.38807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103768 Jy
! Component: 100  -  total flux cleaned = 0.138947 Jy
! Total flux subtracted in 100 components = 0.138947 Jy
! Clean residual min=-0.008572 max=0.022979 Jy/beam
! Clean residual mean=-0.000015 rms=0.002550 Jy/beam
! Combined flux in latest and established models = 0.138947 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.138947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070859Jy  sigma=0.608682
! Fit after  self-cal, rms=0.070706Jy  sigma=0.607909
! Inverting map 
! Added new window around map position (1.5, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230424 Jy
! Component: 100  -  total flux cleaned = 0.0373352 Jy
! Total flux subtracted in 100 components = 0.0373352 Jy
! Clean residual min=-0.006323 max=0.009702 Jy/beam
! Clean residual mean=-0.000009 rms=0.001672 Jy/beam
! Combined flux in latest and established models = 0.176282 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 39 components and 0.176282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061439Jy  sigma=0.501502
! Fit after  self-cal, rms=0.060859Jy  sigma=0.497427
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108155 Jy
! Component: 100  -  total flux cleaned = 0.0180755 Jy
! Total flux subtracted in 100 components = 0.0180755 Jy
! Clean residual min=-0.004990 max=0.006549 Jy/beam
! Clean residual mean=-0.000005 rms=0.001337 Jy/beam
! Combined flux in latest and established models = 0.194358 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 52 components and 0.194358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058564Jy  sigma=0.469642
! Fit after  self-cal, rms=0.058437Jy  sigma=0.468683
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.734 mas, bmaj=5.437 mas, bpa=7.294 degrees
! Estimated noise=0.912971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00715036 Jy
! Component: 100  -  total flux cleaned = 0.0114497 Jy
! Component: 150  -  total flux cleaned = 0.0142262 Jy
! Component: 200  -  total flux cleaned = 0.0160837 Jy
! Total flux subtracted in 200 components = 0.0160837 Jy
! Clean residual min=-0.003538 max=0.004025 Jy/beam
! Clean residual mean=-0.000005 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.210442 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 71 components and 0.210442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057600Jy  sigma=0.458342
! Fit after  self-cal, rms=0.057555Jy  sigma=0.457959
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.734 x 5.437 at 7.294 degrees (North through East)
! Clean map  min=-0.0033152  max=0.13645 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.96     KP        1.01     
!   LA        0.99     MK        0.97     OV        0.95     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.44     FD        0.98     HN        0.98     KP        0.98     
!   LA        0.98     MK        0.96     OV        0.95     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.99     KP        0.97     
!   LA        0.99     MK        0.99     OV        0.97     PT        1.02     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.057555Jy  sigma=0.457959
! Fit after  self-cal, rms=0.058367Jy  sigma=0.442320
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.71 mas, bmaj=5.43 mas, bpa=6.639 degrees
! Estimated noise=0.914437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675627 Jy
! Component: 100  -  total flux cleaned = 0.000641102 Jy
! Component: 150  -  total flux cleaned = 0.00054934 Jy
! Component: 200  -  total flux cleaned = 0.000494161 Jy
! Total flux subtracted in 200 components = 0.000494161 Jy
! Clean residual min=-0.002700 max=0.002441 Jy/beam
! Clean residual mean=-0.000004 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.210936 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 78 components and 0.210936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058289Jy  sigma=0.442033
! Fit after  self-cal, rms=0.058348Jy  sigma=0.441885
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058348Jy  sigma=0.441885
! Fit after  self-cal, rms=0.057781Jy  sigma=0.433949
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.698 mas, bmaj=5.407 mas, bpa=6.761 degrees
! Estimated noise=0.913411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166885 Jy
! Component: 100  -  total flux cleaned = -0.000166222 Jy
! Component: 150  -  total flux cleaned = -0.000190139 Jy
! Component: 200  -  total flux cleaned = -0.000167588 Jy
! Total flux subtracted in 200 components = -0.000167588 Jy
! Clean residual min=-0.001764 max=0.001715 Jy/beam
! Clean residual mean=-0.000008 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.210768 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 81 components and 0.210768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057752Jy  sigma=0.433712
! Fit after  self-cal, rms=0.057749Jy  sigma=0.433629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.04442e-07 Jy
! Component: 100  -  total flux cleaned = -4.27525e-05 Jy
! Component: 150  -  total flux cleaned = -6.27692e-05 Jy
! Component: 200  -  total flux cleaned = -8.06178e-05 Jy
! Total flux subtracted in 200 components = -8.06178e-05 Jy
! Clean residual min=-0.001771 max=0.001652 Jy/beam
! Clean residual mean=-0.000008 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.210687 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 84 components and 0.210687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057734Jy  sigma=0.433507
! Fit after  self-cal, rms=0.057734Jy  sigma=0.433497
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057734Jy  sigma=0.433497
! Fit after  self-cal, rms=0.057802Jy  sigma=0.433458
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.69 mas, bmaj=5.398 mas, bpa=6.613 degrees
! Estimated noise=0.912665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.71932e-06 Jy
! Component: 100  -  total flux cleaned = 2.75725e-05 Jy
! Component: 150  -  total flux cleaned = 2.74181e-05 Jy
! Component: 200  -  total flux cleaned = 4.41206e-05 Jy
! Total flux subtracted in 200 components = 4.41206e-05 Jy
! Clean residual min=-0.001754 max=0.001595 Jy/beam
! Clean residual mean=-0.000008 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.210732 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 88 components and 0.210732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057789Jy  sigma=0.433350
! Fit after  self-cal, rms=0.057791Jy  sigma=0.433338
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51126e-06 Jy
! Component: 100  -  total flux cleaned = -3.0488e-05 Jy
! Component: 150  -  total flux cleaned = -3.11671e-05 Jy
! Component: 200  -  total flux cleaned = -3.09287e-05 Jy
! Total flux subtracted in 200 components = -3.09287e-05 Jy
! Clean residual min=-0.001759 max=0.001560 Jy/beam
! Clean residual mean=-0.000008 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.210701 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 92 components and 0.210701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057783Jy  sigma=0.433271
! Fit after  self-cal, rms=0.057783Jy  sigma=0.433264
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057783Jy  sigma=0.433264
! Fit after  self-cal, rms=0.057751Jy  sigma=0.433249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.409 mas, bmaj=9.638 mas, bpa=28.84 degrees
! Estimated noise=1.11448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.31751e-05 Jy
! Component: 100  -  total flux cleaned = 1.37373e-05 Jy
! Component: 150  -  total flux cleaned = -2.76475e-05 Jy
! Component: 200  -  total flux cleaned = -4.46219e-05 Jy
! Total flux subtracted in 200 components = -4.46219e-05 Jy
! Clean residual min=-0.001723 max=0.001519 Jy/beam
! Clean residual mean=-0.000018 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.210656 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 99 components and 0.210656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057750Jy  sigma=0.433235
! Fit after  self-cal, rms=0.057748Jy  sigma=0.433219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.49128e-05 Jy
! Component: 100  -  total flux cleaned = -6.50028e-05 Jy
! Component: 150  -  total flux cleaned = -8.1655e-05 Jy
! Component: 200  -  total flux cleaned = -9.58958e-05 Jy
! Total flux subtracted in 200 components = -9.58958e-05 Jy
! Clean residual min=-0.001722 max=0.001499 Jy/beam
! Clean residual mean=-0.000018 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.21056 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 101 components and 0.21056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057750Jy  sigma=0.433222
! Fit after  self-cal, rms=0.057749Jy  sigma=0.433213
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.684 mas, bmaj=5.387 mas, bpa=6.469 degrees
! Estimated noise=0.911686 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.684 x 5.387 at 6.469 degrees (North through East)
! Clean map  min=-0.0016765  max=0.136 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.155 mas, bmaj=4.566 mas, bpa=8.64 degrees
! Estimated noise=1.38506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103501 Jy
! Component: 100  -  total flux cleaned = 0.142005 Jy
! Component: 150  -  total flux cleaned = 0.164857 Jy
! Component: 200  -  total flux cleaned = 0.179508 Jy
! Total flux subtracted in 200 components = 0.179508 Jy
! Clean residual min=-0.004527 max=0.007825 Jy/beam
! Clean residual mean=-0.000009 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.179508 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.179508 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.684 mas, bmaj=5.387 mas, bpa=6.469 degrees
! Estimated noise=0.911686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124219 Jy
! Component: 100  -  total flux cleaned = 0.0196958 Jy
! Component: 150  -  total flux cleaned = 0.0241211 Jy
! Component: 200  -  total flux cleaned = 0.0268858 Jy
! Total flux subtracted in 200 components = 0.0268858 Jy
! Clean residual min=-0.002110 max=0.002047 Jy/beam
! Clean residual mean=-0.000009 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.206394 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 60 components and 0.206394 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.409 mas, bmaj=9.638 mas, bpa=28.84 degrees
! Estimated noise=1.11448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231651 Jy
! Component: 100  -  total flux cleaned = 0.00326023 Jy
! Component: 150  -  total flux cleaned = 0.00369136 Jy
! Component: 200  -  total flux cleaned = 0.00380709 Jy
! Total flux subtracted in 200 components = 0.00380709 Jy
! Clean residual min=-0.001715 max=0.001547 Jy/beam
! Clean residual mean=-0.000018 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.210201 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.34325e-05 Jy
! Component: 100  -  total flux cleaned = 3.82527e-05 Jy
! Component: 150  -  total flux cleaned = 5.26774e-05 Jy
! Component: 200  -  total flux cleaned = 7.24613e-05 Jy
! Total flux subtracted in 200 components = 7.24613e-05 Jy
! Clean residual min=-0.001714 max=0.001545 Jy/beam
! Clean residual mean=-0.000018 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.210273 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.210273 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.684 mas, bmaj=5.387 mas, bpa=6.469 degrees
! Estimated noise=0.911686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119874 Jy
! Component: 100  -  total flux cleaned = -0.000121006 Jy
! Component: 150  -  total flux cleaned = -5.78145e-05 Jy
! Component: 200  -  total flux cleaned = -2.98748e-05 Jy
! Total flux subtracted in 200 components = -2.98748e-05 Jy
! Clean residual min=-0.001833 max=0.001635 Jy/beam
! Clean residual mean=-0.000009 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.210243 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 77 components and 0.210243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057788Jy  sigma=0.433573
! Fit after  self-cal, rms=0.057764Jy  sigma=0.433415
wmodel J1013+4918_S_map.mod
! Writing 77 model components to file: J1013+4918_S_map.mod
wobs   J1013+4918_S_uvs.fits
! Writing UV FITS file: J1013+4918_S_uvs.fits
wwins  J1013+4918_S_map.win
! wwins: Wrote 2 windows to J1013+4918_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.91352e-05 Jy
! Component: 100  -  total flux cleaned = -4.87731e-05 Jy
! Component: 150  -  total flux cleaned = 3.10332e-05 Jy
! Component: 200  -  total flux cleaned = 0.000133009 Jy
! Component: 250  -  total flux cleaned = 0.000331221 Jy
! Component: 300  -  total flux cleaned = 0.000524228 Jy
! Component: 350  -  total flux cleaned = 0.00068868 Jy
! Component: 400  -  total flux cleaned = 0.00084894 Jy
! Component: 450  -  total flux cleaned = 0.000983403 Jy
! Component: 500  -  total flux cleaned = 0.00113627 Jy
! Component: 550  -  total flux cleaned = 0.00122156 Jy
! Component: 600  -  total flux cleaned = 0.00130502 Jy
! Component: 650  -  total flux cleaned = 0.00136607 Jy
! Component: 700  -  total flux cleaned = 0.0013863 Jy
! Component: 750  -  total flux cleaned = 0.00142576 Jy
! Component: 800  -  total flux cleaned = 0.00138669 Jy
! Component: 850  -  total flux cleaned = 0.00138665 Jy
! Component: 900  -  total flux cleaned = 0.00144361 Jy
! Component: 950  -  total flux cleaned = 0.00144386 Jy
! Component: 1000  -  total flux cleaned = 0.00153614 Jy
! Component: 1050  -  total flux cleaned = 0.0015724 Jy
! Component: 1100  -  total flux cleaned = 0.00164379 Jy
! Component: 1150  -  total flux cleaned = 0.00169638 Jy
! Component: 1200  -  total flux cleaned = 0.00169646 Jy
! Component: 1250  -  total flux cleaned = 0.00169657 Jy
! Component: 1300  -  total flux cleaned = 0.00173047 Jy
! Component: 1350  -  total flux cleaned = 0.0017303 Jy
! Component: 1400  -  total flux cleaned = 0.00168092 Jy
! Component: 1450  -  total flux cleaned = 0.00171359 Jy
! Component: 1500  -  total flux cleaned = 0.00176188 Jy
! Component: 1550  -  total flux cleaned = 0.0017142 Jy
! Component: 1600  -  total flux cleaned = 0.00176159 Jy
! Component: 1650  -  total flux cleaned = 0.00176149 Jy
! Component: 1700  -  total flux cleaned = 0.00177676 Jy
! Component: 1750  -  total flux cleaned = 0.00176176 Jy
! Component: 1800  -  total flux cleaned = 0.00180685 Jy
! Component: 1850  -  total flux cleaned = 0.00177693 Jy
! Component: 1900  -  total flux cleaned = 0.00182107 Jy
! Component: 1950  -  total flux cleaned = 0.00177742 Jy
! Component: 2000  -  total flux cleaned = 0.00180641 Jy
! Component: 2050  -  total flux cleaned = 0.00183477 Jy
! Component: 2100  -  total flux cleaned = 0.00182047 Jy
! Component: 2150  -  total flux cleaned = 0.00179236 Jy
! Component: 2200  -  total flux cleaned = 0.00180633 Jy
! Component: 2250  -  total flux cleaned = 0.00183387 Jy
! Component: 2300  -  total flux cleaned = 0.00184765 Jy
! Component: 2350  -  total flux cleaned = 0.00186127 Jy
! Component: 2400  -  total flux cleaned = 0.00188791 Jy
! Component: 2450  -  total flux cleaned = 0.0018748 Jy
! Component: 2500  -  total flux cleaned = 0.00191424 Jy
! Component: 2550  -  total flux cleaned = 0.00188849 Jy
! Component: 2600  -  total flux cleaned = 0.00195305 Jy
! Component: 2650  -  total flux cleaned = 0.00196583 Jy
! Component: 2700  -  total flux cleaned = 0.00195322 Jy
! Component: 2750  -  total flux cleaned = 0.00194056 Jy
! Component: 2800  -  total flux cleaned = 0.00196556 Jy
! Component: 2850  -  total flux cleaned = 0.0020151 Jy
! Component: 2900  -  total flux cleaned = 0.00203937 Jy
! Component: 2950  -  total flux cleaned = 0.00200279 Jy
! Component: 3000  -  total flux cleaned = 0.00200287 Jy
! Component: 3050  -  total flux cleaned = 0.00203873 Jy
! Component: 3100  -  total flux cleaned = 0.0020387 Jy
! Component: 3150  -  total flux cleaned = 0.00201501 Jy
! Component: 3200  -  total flux cleaned = 0.00205028 Jy
! Component: 3250  -  total flux cleaned = 0.00203865 Jy
! Component: 3300  -  total flux cleaned = 0.0020156 Jy
! Component: 3350  -  total flux cleaned = 0.00202708 Jy
! Component: 3400  -  total flux cleaned = 0.00206128 Jy
! Component: 3450  -  total flux cleaned = 0.0019933 Jy
! Component: 3500  -  total flux cleaned = 0.00203828 Jy
! Component: 3550  -  total flux cleaned = 0.00200475 Jy
! Component: 3600  -  total flux cleaned = 0.00200475 Jy
! Component: 3650  -  total flux cleaned = 0.00196065 Jy
! Component: 3700  -  total flux cleaned = 0.00197158 Jy
! Component: 3750  -  total flux cleaned = 0.00196068 Jy
! Component: 3800  -  total flux cleaned = 0.00196057 Jy
! Component: 3850  -  total flux cleaned = 0.00190681 Jy
! Component: 3900  -  total flux cleaned = 0.00188544 Jy
! Component: 3950  -  total flux cleaned = 0.00188554 Jy
! Component: 4000  -  total flux cleaned = 0.00189596 Jy
! Component: 4050  -  total flux cleaned = 0.00187493 Jy
! Total flux subtracted in 4096 components = 0.00181236 Jy
! Clean residual min=-0.000674 max=0.000701 Jy/beam
! Clean residual mean=-0.000002 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.212056 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 377 components and 0.212056 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1013+4918_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.684 x 5.387 at 6.469 degrees (North through East)
! Clean map  min=-0.001123  max=0.13611 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1013+4918_S_map.fits
wmodel /image_prod/ug002_uva//J1013+4918_S_map.mod
! Writing 377 model components to file: /image_prod/ug002_uva//J1013+4918_S_map.mod
wobs   /image_prod/ug002_uva//J1013+4918_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1013+4918_S_uvs.fits
wwins  /image_prod/ug002_uva//J1013+4918_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1013+4918_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.13611 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000181401 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.399825 0.399825 0.79965 1.5993 3.1986 6.3972 12.7944 25.5888 51.1776
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.136 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  750.328 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1013+4918_S_dfm.log closed on Wed Mar  4 23:28:08 2020