! Started logfile: /image_prod/ug002_uva//J1011-2847_X_dfm.log on Wed Mar  4 23:27:08 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1011-2847_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1011-2847_X_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.974306 visibilities/baseline/integration-bin.
! Found source: J1011-2847
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 16836 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1011-2847_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022606Jy  sigma=7.927222
! Fit after  self-cal, rms=0.827141Jy  sigma=6.313031
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6093 mas, bmaj=1.596 mas, bpa=-4.691 degrees
! Estimated noise=1.48222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128659 Jy
! Component: 100  -  total flux cleaned = 0.161728 Jy
! Total flux subtracted in 100 components = 0.161728 Jy
! Clean residual min=-0.007737 max=0.015771 Jy/beam
! Clean residual mean=-0.000040 rms=0.002051 Jy/beam
! Combined flux in latest and established models = 0.161728 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.161728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080731Jy  sigma=0.570482
! Fit after  self-cal, rms=0.080717Jy  sigma=0.570385
! Inverting map 
! Added new window around map position (-0.8, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176211 Jy
! Component: 100  -  total flux cleaned = 0.029124 Jy
! Total flux subtracted in 100 components = 0.029124 Jy
! Clean residual min=-0.006694 max=0.010192 Jy/beam
! Clean residual mean=-0.000029 rms=0.001476 Jy/beam
! Combined flux in latest and established models = 0.190852 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.190852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074312Jy  sigma=0.503902
! Fit after  self-cal, rms=0.074196Jy  sigma=0.502647
! Inverting map 
! Added new window around map position (-1, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00982195 Jy
! Component: 100  -  total flux cleaned = 0.0158679 Jy
! Total flux subtracted in 100 components = 0.0158679 Jy
! Clean residual min=-0.006480 max=0.007145 Jy/beam
! Clean residual mean=-0.000023 rms=0.001266 Jy/beam
! Combined flux in latest and established models = 0.20672 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.20672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072116Jy  sigma=0.484046
! Fit after  self-cal, rms=0.072027Jy  sigma=0.482650
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7857 mas, bmaj=2.008 mas, bpa=-4.467 degrees
! Estimated noise=0.729983 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00916948 Jy
! Component: 100  -  total flux cleaned = 0.0147131 Jy
! Component: 150  -  total flux cleaned = 0.0165866 Jy
! Component: 200  -  total flux cleaned = 0.0170807 Jy
! Total flux subtracted in 200 components = 0.0170807 Jy
! Clean residual min=-0.004049 max=0.004626 Jy/beam
! Clean residual mean=-0.000022 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.223801 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 56 components and 0.223801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070508Jy  sigma=0.472555
! Fit after  self-cal, rms=0.070511Jy  sigma=0.472462
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7857 x 2.008 at -4.467 degrees (North through East)
! Clean map  min=-0.0037419  max=0.16383 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.11     KP        1.04     
!   LA        1.08     MK        1.01     OV        0.90     PT        0.92     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.15     KP        1.02     
!   LA        1.06     MK        0.96     OV        0.92     PT        0.93     
!   SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.08     KP        1.02     
!   LA        1.06     MK        0.98     OV        0.94     PT        0.92     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.06     KP        1.03     
!   LA        1.09     MK        1.01     OV        0.92     PT        0.93     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.06     KP        1.01     
!   LA        1.07     MK        1.02     OV        0.95     PT        0.92     
!   SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.06     KP        1.03     
!   LA        1.07     MK        0.99     OV        0.92     PT        0.92     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.13     KP        1.03     
!   LA        1.10     MK        0.99     OV        0.91     PT        0.90     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.08     KP        1.02     
!   LA        1.07     MK        1.04     OV        0.94     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.03     KP        1.00     
!   LA        1.06     MK        1.02     OV        0.92     PT        0.93     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.09     KP        1.04     
!   LA        1.06     MK        0.99     OV        0.92     PT        0.93     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.07     KP        1.03     
!   LA        1.05     MK        1.07     OV        0.94     PT        0.92     
!   SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.09     KP        1.05     
!   LA        1.05     MK        1.08     OV        0.92     PT        0.90     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.070511Jy  sigma=0.472462
! Fit after  self-cal, rms=0.070712Jy  sigma=0.460388
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7892 mas, bmaj=2.007 mas, bpa=-4.067 degrees
! Estimated noise=0.728669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189507 Jy
! Component: 100  -  total flux cleaned = -0.00189245 Jy
! Component: 150  -  total flux cleaned = -0.00182545 Jy
! Component: 200  -  total flux cleaned = -0.00188212 Jy
! Total flux subtracted in 200 components = -0.00188212 Jy
! Clean residual min=-0.002736 max=0.002890 Jy/beam
! Clean residual mean=-0.000003 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.221919 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.221919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070480Jy  sigma=0.459393
! Fit after  self-cal, rms=0.070491Jy  sigma=0.459283
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070491Jy  sigma=0.459283
! Fit after  self-cal, rms=0.071583Jy  sigma=0.456221
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7899 mas, bmaj=2.009 mas, bpa=-4.171 degrees
! Estimated noise=0.727731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000891846 Jy
! Component: 100  -  total flux cleaned = -0.00102141 Jy
! Component: 150  -  total flux cleaned = -0.00113626 Jy
! Component: 200  -  total flux cleaned = -0.00120588 Jy
! Total flux subtracted in 200 components = -0.00120588 Jy
! Clean residual min=-0.002129 max=0.001811 Jy/beam
! Clean residual mean=0.000000 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.220713 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 87 components and 0.220713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071530Jy  sigma=0.455851
! Fit after  self-cal, rms=0.071547Jy  sigma=0.455833
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.82006e-05 Jy
! Component: 100  -  total flux cleaned = -0.000130477 Jy
! Component: 150  -  total flux cleaned = -0.000219923 Jy
! Component: 200  -  total flux cleaned = -0.000275667 Jy
! Total flux subtracted in 200 components = -0.000275667 Jy
! Clean residual min=-0.001986 max=0.001783 Jy/beam
! Clean residual mean=0.000000 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.220437 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.220437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071520Jy  sigma=0.455652
! Fit after  self-cal, rms=0.071518Jy  sigma=0.455649
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071518Jy  sigma=0.455649
! Fit after  self-cal, rms=0.072479Jy  sigma=0.455411
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7904 mas, bmaj=2.009 mas, bpa=-4.231 degrees
! Estimated noise=0.72723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000529236 Jy
! Component: 100  -  total flux cleaned = -0.000639827 Jy
! Component: 150  -  total flux cleaned = -0.000703615 Jy
! Component: 200  -  total flux cleaned = -0.000790017 Jy
! Total flux subtracted in 200 components = -0.000790017 Jy
! Clean residual min=-0.001901 max=0.001744 Jy/beam
! Clean residual mean=0.000001 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.219647 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.219647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072443Jy  sigma=0.455154
! Fit after  self-cal, rms=0.072449Jy  sigma=0.455149
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.63968e-05 Jy
! Component: 100  -  total flux cleaned = -0.000108833 Jy
! Component: 150  -  total flux cleaned = -0.000157805 Jy
! Component: 200  -  total flux cleaned = -0.000181055 Jy
! Total flux subtracted in 200 components = -0.000181055 Jy
! Clean residual min=-0.001809 max=0.001696 Jy/beam
! Clean residual mean=0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.219466 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 110 components and 0.219466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072433Jy  sigma=0.455011
! Fit after  self-cal, rms=0.072432Jy  sigma=0.455009
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072432Jy  sigma=0.455009
! Fit after  self-cal, rms=0.072832Jy  sigma=0.454967
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.651 mas, bmaj=5.882 mas, bpa=4.485 degrees
! Estimated noise=0.929598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000955715 Jy
! Component: 100  -  total flux cleaned = -0.00115651 Jy
! Component: 150  -  total flux cleaned = -0.00128822 Jy
! Component: 200  -  total flux cleaned = -0.00143543 Jy
! Total flux subtracted in 200 components = -0.00143543 Jy
! Clean residual min=-0.002199 max=0.001824 Jy/beam
! Clean residual mean=0.000003 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.218031 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 121 components and 0.218031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072827Jy  sigma=0.454899
! Fit after  self-cal, rms=0.072824Jy  sigma=0.454876
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000177776 Jy
! Component: 100  -  total flux cleaned = -0.000288341 Jy
! Component: 150  -  total flux cleaned = -0.00038926 Jy
! Component: 200  -  total flux cleaned = -0.000483362 Jy
! Total flux subtracted in 200 components = -0.000483362 Jy
! Clean residual min=-0.001957 max=0.001737 Jy/beam
! Clean residual mean=0.000003 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.217547 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 125 components and 0.217547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072829Jy  sigma=0.454882
! Fit after  self-cal, rms=0.072826Jy  sigma=0.454870
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7906 mas, bmaj=2.008 mas, bpa=-4.265 degrees
! Estimated noise=0.726493 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7906 x 2.008 at -4.265 degrees (North through East)
! Clean map  min=-0.0018936  max=0.16545 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.611 mas, bmaj=1.589 mas, bpa=-4.411 degrees
! Estimated noise=1.48465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128626 Jy
! Component: 100  -  total flux cleaned = 0.161686 Jy
! Component: 150  -  total flux cleaned = 0.1791 Jy
! Component: 200  -  total flux cleaned = 0.190519 Jy
! Total flux subtracted in 200 components = 0.190519 Jy
! Clean residual min=-0.003999 max=0.006573 Jy/beam
! Clean residual mean=-0.000016 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.190519 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.190519 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7906 mas, bmaj=2.008 mas, bpa=-4.265 degrees
! Estimated noise=0.726493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126976 Jy
! Component: 100  -  total flux cleaned = 0.0192697 Jy
! Component: 150  -  total flux cleaned = 0.0230309 Jy
! Component: 200  -  total flux cleaned = 0.0253389 Jy
! Total flux subtracted in 200 components = 0.0253389 Jy
! Clean residual min=-0.001643 max=0.001771 Jy/beam
! Clean residual mean=-0.000000 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.215858 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 43 components and 0.215858 Jy
! Inverting map 
! Added new window around map position (-3.6, 43).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152474 Jy
! Component: 100  -  total flux cleaned = 0.00209469 Jy
! Component: 150  -  total flux cleaned = 0.00222614 Jy
! Component: 200  -  total flux cleaned = 0.00230488 Jy
! Total flux subtracted in 200 components = 0.00230488 Jy
! Clean residual min=-0.001539 max=0.001651 Jy/beam
! Clean residual mean=0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.218163 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 53 components and 0.218163 Jy
! Inverting map 
! Added new window around map position (-9, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010294 Jy
! Component: 100  -  total flux cleaned = 0.00117826 Jy
! Component: 150  -  total flux cleaned = 0.00124498 Jy
! Component: 200  -  total flux cleaned = 0.00127436 Jy
! Total flux subtracted in 200 components = 0.00127436 Jy
! Clean residual min=-0.001541 max=0.001447 Jy/beam
! Clean residual mean=0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.219437 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 68 components and 0.219437 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.651 mas, bmaj=5.882 mas, bpa=4.485 degrees
! Estimated noise=0.929598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.39625e-05 Jy
! Component: 100  -  total flux cleaned = -0.0001643 Jy
! Component: 150  -  total flux cleaned = -0.000252733 Jy
! Component: 200  -  total flux cleaned = -0.000335793 Jy
! Total flux subtracted in 200 components = -0.000335793 Jy
! Clean residual min=-0.001551 max=0.001653 Jy/beam
! Clean residual mean=0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.219102 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.50998e-05 Jy
! Component: 100  -  total flux cleaned = -0.000165697 Jy
! Component: 150  -  total flux cleaned = -0.000263564 Jy
! Component: 200  -  total flux cleaned = -0.00033976 Jy
! Total flux subtracted in 200 components = -0.00033976 Jy
! Clean residual min=-0.001442 max=0.001631 Jy/beam
! Clean residual mean=0.000002 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.218762 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.218762 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7906 mas, bmaj=2.008 mas, bpa=-4.265 degrees
! Estimated noise=0.726493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129102 Jy
! Component: 100  -  total flux cleaned = 0.000186914 Jy
! Component: 150  -  total flux cleaned = 0.000240938 Jy
! Component: 200  -  total flux cleaned = 0.000266043 Jy
! Total flux subtracted in 200 components = 0.000266043 Jy
! Clean residual min=-0.001387 max=0.001435 Jy/beam
! Clean residual mean=0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.219028 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.219028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072799Jy  sigma=0.454416
! Fit after  self-cal, rms=0.072784Jy  sigma=0.454356
wmodel J1011-2847_X_map.mod
! Writing 105 model components to file: J1011-2847_X_map.mod
wobs   J1011-2847_X_uvs.fits
! Writing UV FITS file: J1011-2847_X_uvs.fits
wwins  J1011-2847_X_map.win
! wwins: Wrote 6 windows to J1011-2847_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305369 Jy
! Component: 100  -  total flux cleaned = -0.00047537 Jy
! Component: 150  -  total flux cleaned = -0.000659809 Jy
! Component: 200  -  total flux cleaned = -0.000726015 Jy
! Component: 250  -  total flux cleaned = -0.000726014 Jy
! Component: 300  -  total flux cleaned = -0.000787587 Jy
! Component: 350  -  total flux cleaned = -0.000727419 Jy
! Component: 400  -  total flux cleaned = -0.000826035 Jy
! Component: 450  -  total flux cleaned = -0.000825983 Jy
! Component: 500  -  total flux cleaned = -0.000863965 Jy
! Component: 550  -  total flux cleaned = -0.000845412 Jy
! Component: 600  -  total flux cleaned = -0.000845875 Jy
! Component: 650  -  total flux cleaned = -0.000917757 Jy
! Component: 700  -  total flux cleaned = -0.00098848 Jy
! Component: 750  -  total flux cleaned = -0.00109254 Jy
! Component: 800  -  total flux cleaned = -0.0011779 Jy
! Component: 850  -  total flux cleaned = -0.00124509 Jy
! Component: 900  -  total flux cleaned = -0.00127823 Jy
! Component: 950  -  total flux cleaned = -0.0012944 Jy
! Component: 1000  -  total flux cleaned = -0.0013269 Jy
! Component: 1050  -  total flux cleaned = -0.00139106 Jy
! Component: 1100  -  total flux cleaned = -0.00139087 Jy
! Component: 1150  -  total flux cleaned = -0.00140652 Jy
! Component: 1200  -  total flux cleaned = -0.00143745 Jy
! Component: 1250  -  total flux cleaned = -0.00137612 Jy
! Component: 1300  -  total flux cleaned = -0.00143727 Jy
! Component: 1350  -  total flux cleaned = -0.00142204 Jy
! Component: 1400  -  total flux cleaned = -0.00148185 Jy
! Component: 1450  -  total flux cleaned = -0.00157054 Jy
! Component: 1500  -  total flux cleaned = -0.00154118 Jy
! Component: 1550  -  total flux cleaned = -0.0015703 Jy
! Component: 1600  -  total flux cleaned = -0.00161361 Jy
! Component: 1650  -  total flux cleaned = -0.00164215 Jy
! Component: 1700  -  total flux cleaned = -0.00169888 Jy
! Component: 1750  -  total flux cleaned = -0.00182505 Jy
! Component: 1800  -  total flux cleaned = -0.00182499 Jy
! Component: 1850  -  total flux cleaned = -0.00186619 Jy
! Component: 1900  -  total flux cleaned = -0.00189359 Jy
! Component: 1950  -  total flux cleaned = -0.00196128 Jy
! Component: 2000  -  total flux cleaned = -0.00194802 Jy
! Component: 2050  -  total flux cleaned = -0.00201499 Jy
! Component: 2100  -  total flux cleaned = -0.00201507 Jy
! Component: 2150  -  total flux cleaned = -0.00209403 Jy
! Component: 2200  -  total flux cleaned = -0.00209401 Jy
! Component: 2250  -  total flux cleaned = -0.00205506 Jy
! Component: 2300  -  total flux cleaned = -0.00214533 Jy
! Component: 2350  -  total flux cleaned = -0.00215803 Jy
! Component: 2400  -  total flux cleaned = -0.00210711 Jy
! Component: 2450  -  total flux cleaned = -0.00213232 Jy
! Component: 2500  -  total flux cleaned = -0.0021323 Jy
! Component: 2550  -  total flux cleaned = -0.00214473 Jy
! Component: 2600  -  total flux cleaned = -0.00213244 Jy
! Component: 2650  -  total flux cleaned = -0.00215723 Jy
! Component: 2700  -  total flux cleaned = -0.00215724 Jy
! Component: 2750  -  total flux cleaned = -0.00218164 Jy
! Component: 2800  -  total flux cleaned = -0.00214559 Jy
! Component: 2850  -  total flux cleaned = -0.00218158 Jy
! Component: 2900  -  total flux cleaned = -0.00218155 Jy
! Component: 2950  -  total flux cleaned = -0.00220539 Jy
! Component: 3000  -  total flux cleaned = -0.00221715 Jy
! Component: 3050  -  total flux cleaned = -0.0022406 Jy
! Component: 3100  -  total flux cleaned = -0.0022522 Jy
! Component: 3150  -  total flux cleaned = -0.00225213 Jy
! Component: 3200  -  total flux cleaned = -0.00227499 Jy
! Component: 3250  -  total flux cleaned = -0.00226356 Jy
! Component: 3300  -  total flux cleaned = -0.00225208 Jy
! Component: 3350  -  total flux cleaned = -0.00225205 Jy
! Component: 3400  -  total flux cleaned = -0.00226331 Jy
! Component: 3450  -  total flux cleaned = -0.00225202 Jy
! Component: 3500  -  total flux cleaned = -0.002241 Jy
! Component: 3550  -  total flux cleaned = -0.00220771 Jy
! Component: 3600  -  total flux cleaned = -0.00224078 Jy
! Component: 3650  -  total flux cleaned = -0.00222982 Jy
! Component: 3700  -  total flux cleaned = -0.00225163 Jy
! Component: 3750  -  total flux cleaned = -0.00225161 Jy
! Component: 3800  -  total flux cleaned = -0.00221926 Jy
! Component: 3850  -  total flux cleaned = -0.0022192 Jy
! Component: 3900  -  total flux cleaned = -0.00225125 Jy
! Component: 3950  -  total flux cleaned = -0.00224064 Jy
! Component: 4000  -  total flux cleaned = -0.00230413 Jy
! Component: 4050  -  total flux cleaned = -0.00223029 Jy
! Total flux subtracted in 4096 components = -0.0022303 Jy
! Clean residual min=-0.000619 max=0.000652 Jy/beam
! Clean residual mean=-0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.216798 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 397 components and 0.216798 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1011-2847_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7906 x 2.008 at -4.265 degrees (North through East)
! Clean map  min=-0.0011383  max=0.1658 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1011-2847_X_map.fits
wmodel /image_prod/ug002_uva//J1011-2847_X_map.mod
! Writing 397 model components to file: /image_prod/ug002_uva//J1011-2847_X_map.mod
wobs   /image_prod/ug002_uva//J1011-2847_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1011-2847_X_uvs.fits
wwins  /image_prod/ug002_uva//J1011-2847_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1011-2847_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.165802 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000177498 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.321163 0.321163 0.642326 1.28465 2.5693 5.13861 10.2772 20.5544 41.1089 82.2177
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.165 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  934.105 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1011-2847_X_dfm.log closed on Wed Mar  4 23:27:12 2020