! Started logfile: /image_prod/ug002_uva//J1011+6529_S_b_dfm.log on Wed Mar 4 23:26:08 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1011+6529_S_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1011+6529_S_b_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.835648 visibilities/baseline/integration-bin. ! Found source: J1011+6529 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5415 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1011+6529_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008498Jy sigma=8.291318 ! Fit after self-cal, rms=0.895754Jy sigma=7.385820 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=3.821 mas, bpa=6.003 degrees ! Estimated noise=1.88866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805766 Jy ! Component: 100 - total flux cleaned = 0.101539 Jy ! Total flux subtracted in 100 components = 0.101539 Jy ! Clean residual min=-0.009685 max=0.008425 Jy/beam ! Clean residual mean=0.000015 rms=0.002256 Jy/beam ! Combined flux in latest and established models = 0.101539 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.101539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089829Jy sigma=0.628230 ! Fit after self-cal, rms=0.089802Jy sigma=0.627801 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.534 mas, bmaj=4.578 mas, bpa=59.49 degrees ! Estimated noise=1.20115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830149 Jy ! Component: 100 - total flux cleaned = 0.0107698 Jy ! Component: 150 - total flux cleaned = 0.0107684 Jy ! Component: 200 - total flux cleaned = 0.0107712 Jy ! Total flux subtracted in 200 components = 0.0107712 Jy ! Clean residual min=-0.012100 max=0.006332 Jy/beam ! Clean residual mean=0.000028 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 0.11231 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.11231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088862Jy sigma=0.623678 ! Fit after self-cal, rms=0.088861Jy sigma=0.623591 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.534 x 4.578 at 59.49 degrees (North through East) ! Clean map min=-0.011736 max=0.10566 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 KP 1.09 LA 1.11 ! MK 1.04 NL 1.16 OV 1.07 PT 1.09 ! SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 1.05 KP 1.20 LA 1.10 ! MK 1.16 NL 0.78 OV 0.93 PT 1.14 ! SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 1.02 KP 1.05 LA 1.07 ! MK 1.10 NL 1.01 OV 1.05 PT 1.08 ! SC 1.11 ! ! ! Fit before self-cal, rms=0.088861Jy sigma=0.623591 ! Fit after self-cal, rms=0.072436Jy sigma=0.583493 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.557 mas, bmaj=4.689 mas, bpa=73.82 degrees ! Estimated noise=1.21269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513962 Jy ! Component: 100 - total flux cleaned = 0.000652173 Jy ! Component: 150 - total flux cleaned = 0.000730282 Jy ! Component: 200 - total flux cleaned = 0.000766672 Jy ! Total flux subtracted in 200 components = 0.000766672 Jy ! Clean residual min=-0.004847 max=0.005096 Jy/beam ! Clean residual mean=0.000020 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.113077 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.113077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072370Jy sigma=0.583252 ! Fit after self-cal, rms=0.072788Jy sigma=0.580987 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072788Jy sigma=0.580987 ! Fit after self-cal, rms=0.071734Jy sigma=0.555168 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.574 mas, bmaj=4.636 mas, bpa=58.21 degrees ! Estimated noise=1.20646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513685 Jy ! Component: 100 - total flux cleaned = 0.00039358 Jy ! Component: 150 - total flux cleaned = 0.000321838 Jy ! Component: 200 - total flux cleaned = 0.00032151 Jy ! Total flux subtracted in 200 components = 0.00032151 Jy ! Clean residual min=-0.002946 max=0.002807 Jy/beam ! Clean residual mean=0.000008 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.113399 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.113399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071703Jy sigma=0.555023 ! Fit after self-cal, rms=0.071835Jy sigma=0.553877 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.33472e-05 Jy ! Component: 100 - total flux cleaned = -3.90624e-05 Jy ! Component: 150 - total flux cleaned = -5.53485e-05 Jy ! Component: 200 - total flux cleaned = -5.4851e-05 Jy ! Total flux subtracted in 200 components = -5.4851e-05 Jy ! Clean residual min=-0.002965 max=0.002791 Jy/beam ! Clean residual mean=0.000008 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.113344 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.113344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071819Jy sigma=0.553832 ! Fit after self-cal, rms=0.071822Jy sigma=0.553815 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071822Jy sigma=0.553815 ! Fit after self-cal, rms=0.071454Jy sigma=0.553666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.551 mas, bmaj=4.622 mas, bpa=51.47 degrees ! Estimated noise=1.20204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195448 Jy ! Component: 100 - total flux cleaned = 0.000238665 Jy ! Component: 150 - total flux cleaned = 0.000285454 Jy ! Component: 200 - total flux cleaned = 0.00027148 Jy ! Total flux subtracted in 200 components = 0.00027148 Jy ! Clean residual min=-0.002873 max=0.002709 Jy/beam ! Clean residual mean=0.000007 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.113615 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.113615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071437Jy sigma=0.553612 ! Fit after self-cal, rms=0.071451Jy sigma=0.553589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68597e-05 Jy ! Component: 100 - total flux cleaned = 3.22909e-05 Jy ! Component: 150 - total flux cleaned = 8.19602e-06 Jy ! Component: 200 - total flux cleaned = -2.82871e-06 Jy ! Total flux subtracted in 200 components = -2.82871e-06 Jy ! Clean residual min=-0.002850 max=0.002708 Jy/beam ! Clean residual mean=0.000007 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.113612 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.113612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071442Jy sigma=0.553576 ! Fit after self-cal, rms=0.071446Jy sigma=0.553566 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071446Jy sigma=0.553566 ! Fit after self-cal, rms=0.071071Jy sigma=0.553538 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.938 mas, bmaj=10.21 mas, bpa=81.66 degrees ! Estimated noise=1.43156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526303 Jy ! Component: 100 - total flux cleaned = 0.000525382 Jy ! Component: 150 - total flux cleaned = 0.000524728 Jy ! Component: 200 - total flux cleaned = 0.000524246 Jy ! Total flux subtracted in 200 components = 0.000524246 Jy ! Clean residual min=-0.002678 max=0.002991 Jy/beam ! Clean residual mean=0.000012 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.114137 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.114137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071072Jy sigma=0.553585 ! Fit after self-cal, rms=0.071072Jy sigma=0.553551 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118603 Jy ! Component: 100 - total flux cleaned = 0.00011831 Jy ! Component: 150 - total flux cleaned = 0.000117926 Jy ! Component: 200 - total flux cleaned = 0.000108044 Jy ! Total flux subtracted in 200 components = 0.000108044 Jy ! Clean residual min=-0.002678 max=0.002881 Jy/beam ! Clean residual mean=0.000012 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.114245 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.114245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071075Jy sigma=0.553618 ! Fit after self-cal, rms=0.071079Jy sigma=0.553606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.532 mas, bmaj=4.613 mas, bpa=46.7 degrees ! Estimated noise=1.19832 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.532 x 4.613 at 46.7 degrees (North through East) ! Clean map min=-0.0027376 max=0.10493 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=3.873 mas, bpa=11.15 degrees ! Estimated noise=1.88195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800273 Jy ! Component: 100 - total flux cleaned = 0.100958 Jy ! Component: 150 - total flux cleaned = 0.109694 Jy ! Component: 200 - total flux cleaned = 0.113537 Jy ! Total flux subtracted in 200 components = 0.113537 Jy ! Clean residual min=-0.004749 max=0.004325 Jy/beam ! Clean residual mean=0.000006 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.113537 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.113537 Jy ! Inverting map and beam ! Estimated beam: bmin=4.532 mas, bmaj=4.613 mas, bpa=46.7 degrees ! Estimated noise=1.19832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027019 Jy ! Component: 100 - total flux cleaned = 0.00326542 Jy ! Component: 150 - total flux cleaned = 0.00349032 Jy ! Component: 200 - total flux cleaned = 0.00358137 Jy ! Total flux subtracted in 200 components = 0.00358137 Jy ! Clean residual min=-0.002713 max=0.002669 Jy/beam ! Clean residual mean=0.000007 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.117118 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.117118 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.938 mas, bmaj=10.21 mas, bpa=81.66 degrees ! Estimated noise=1.43156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.53659e-05 Jy ! Component: 100 - total flux cleaned = -0.000129721 Jy ! Component: 150 - total flux cleaned = -0.000166565 Jy ! Component: 200 - total flux cleaned = -0.000197468 Jy ! Total flux subtracted in 200 components = -0.000197468 Jy ! Clean residual min=-0.002566 max=0.002703 Jy/beam ! Clean residual mean=0.000012 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.116921 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.69268e-05 Jy ! Component: 100 - total flux cleaned = -3.83484e-05 Jy ! Component: 150 - total flux cleaned = -4.98911e-05 Jy ! Component: 200 - total flux cleaned = -6.00666e-05 Jy ! Total flux subtracted in 200 components = -6.00666e-05 Jy ! Clean residual min=-0.002545 max=0.002689 Jy/beam ! Clean residual mean=0.000012 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.116861 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.116861 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.532 mas, bmaj=4.613 mas, bpa=46.7 degrees ! Estimated noise=1.19832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.45858e-05 Jy ! Component: 100 - total flux cleaned = 9.1772e-05 Jy ! Component: 150 - total flux cleaned = 0.000124748 Jy ! Component: 200 - total flux cleaned = 6.33649e-05 Jy ! Total flux subtracted in 200 components = 6.33649e-05 Jy ! Clean residual min=-0.002635 max=0.002626 Jy/beam ! Clean residual mean=0.000007 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.116924 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.116924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071009Jy sigma=0.552727 ! Fit after self-cal, rms=0.070982Jy sigma=0.552590 wmodel J1011+6529_S_b_map.mod ! Writing 60 model components to file: J1011+6529_S_b_map.mod wobs J1011+6529_S_b_uvs.fits ! Writing UV FITS file: J1011+6529_S_b_uvs.fits wwins J1011+6529_S_b_map.win ! wwins: Wrote 2 windows to J1011+6529_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248439 Jy ! Component: 100 - total flux cleaned = -0.000476709 Jy ! Component: 150 - total flux cleaned = -0.000782933 Jy ! Component: 200 - total flux cleaned = -0.000994648 Jy ! Component: 250 - total flux cleaned = -0.0011595 Jy ! Component: 300 - total flux cleaned = -0.00120015 Jy ! Component: 350 - total flux cleaned = -0.00112448 Jy ! Component: 400 - total flux cleaned = -0.000976769 Jy ! Component: 450 - total flux cleaned = -0.000761131 Jy ! Component: 500 - total flux cleaned = -0.000585731 Jy ! Component: 550 - total flux cleaned = -0.000381059 Jy ! Component: 600 - total flux cleaned = -0.000149324 Jy ! Component: 650 - total flux cleaned = -8.42177e-05 Jy ! Component: 700 - total flux cleaned = 7.49012e-05 Jy ! Component: 750 - total flux cleaned = 0.000137132 Jy ! Component: 800 - total flux cleaned = 0.00019773 Jy ! Component: 850 - total flux cleaned = 0.00034762 Jy ! Component: 900 - total flux cleaned = 0.000464873 Jy ! Component: 950 - total flux cleaned = 0.000551438 Jy ! Component: 1000 - total flux cleaned = 0.000692832 Jy ! Component: 1050 - total flux cleaned = 0.000776319 Jy ! Component: 1100 - total flux cleaned = 0.000857527 Jy ! Component: 1150 - total flux cleaned = 0.000777062 Jy ! Component: 1200 - total flux cleaned = 0.000830106 Jy ! Component: 1250 - total flux cleaned = 0.000881839 Jy ! Component: 1300 - total flux cleaned = 0.000907732 Jy ! Component: 1350 - total flux cleaned = 0.000932911 Jy ! Component: 1400 - total flux cleaned = 0.000957789 Jy ! Component: 1450 - total flux cleaned = 0.000909124 Jy ! Component: 1500 - total flux cleaned = 0.00100502 Jy ! Component: 1550 - total flux cleaned = 0.00100461 Jy ! Component: 1600 - total flux cleaned = 0.0010507 Jy ! Component: 1650 - total flux cleaned = 0.00105077 Jy ! Component: 1700 - total flux cleaned = 0.0010284 Jy ! Component: 1750 - total flux cleaned = 0.0010953 Jy ! Component: 1800 - total flux cleaned = 0.00120538 Jy ! Component: 1850 - total flux cleaned = 0.00118358 Jy ! Component: 1900 - total flux cleaned = 0.00124827 Jy ! Component: 1950 - total flux cleaned = 0.00122693 Jy ! Component: 2000 - total flux cleaned = 0.00129025 Jy ! Component: 2050 - total flux cleaned = 0.00126939 Jy ! Component: 2100 - total flux cleaned = 0.00124855 Jy ! Component: 2150 - total flux cleaned = 0.00118739 Jy ! Component: 2200 - total flux cleaned = 0.00120716 Jy ! Component: 2250 - total flux cleaned = 0.00108727 Jy ! Component: 2300 - total flux cleaned = 0.00106805 Jy ! Component: 2350 - total flux cleaned = 0.00100978 Jy ! Component: 2400 - total flux cleaned = 0.000990397 Jy ! Component: 2450 - total flux cleaned = 0.000913805 Jy ! Component: 2500 - total flux cleaned = 0.000819117 Jy ! Component: 2550 - total flux cleaned = 0.000819245 Jy ! Component: 2600 - total flux cleaned = 0.000782281 Jy ! Component: 2650 - total flux cleaned = 0.000745487 Jy ! Component: 2700 - total flux cleaned = 0.000727512 Jy ! Component: 2750 - total flux cleaned = 0.000727514 Jy ! Component: 2800 - total flux cleaned = 0.000656004 Jy ! Component: 2850 - total flux cleaned = 0.000602994 Jy ! Component: 2900 - total flux cleaned = 0.000550613 Jy ! Component: 2950 - total flux cleaned = 0.000533178 Jy ! Component: 3000 - total flux cleaned = 0.000464144 Jy ! Component: 3050 - total flux cleaned = 0.00041289 Jy ! Component: 3100 - total flux cleaned = 0.000327954 Jy ! Component: 3150 - total flux cleaned = 0.000294261 Jy ! Component: 3200 - total flux cleaned = 0.000210685 Jy ! Component: 3250 - total flux cleaned = 0.000177557 Jy ! Component: 3300 - total flux cleaned = 0.000127978 Jy ! Component: 3350 - total flux cleaned = 3.01415e-05 Jy ! Component: 3400 - total flux cleaned = 1.39556e-05 Jy ! Component: 3450 - total flux cleaned = -1.83591e-05 Jy ! Component: 3500 - total flux cleaned = -9.80835e-05 Jy ! Component: 3550 - total flux cleaned = -0.000129766 Jy ! Component: 3600 - total flux cleaned = -0.000177014 Jy ! Component: 3650 - total flux cleaned = -0.000223813 Jy ! Component: 3700 - total flux cleaned = -0.000254801 Jy ! Component: 3750 - total flux cleaned = -0.000316406 Jy ! Component: 3800 - total flux cleaned = -0.000331718 Jy ! Component: 3850 - total flux cleaned = -0.00037724 Jy ! Component: 3900 - total flux cleaned = -0.000437546 Jy ! Component: 3950 - total flux cleaned = -0.000422643 Jy ! Component: 4000 - total flux cleaned = -0.000482324 Jy ! Component: 4050 - total flux cleaned = -0.000511951 Jy ! Total flux subtracted in 4096 components = -0.000570672 Jy ! Clean residual min=-0.000953 max=0.001034 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.116354 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 310 components and 0.116354 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1011+6529_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.532 x 4.613 at 46.7 degrees (North through East) ! Clean map min=-0.0016927 max=0.10477 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1011+6529_S_b_map.fits wmodel /image_prod/ug002_uva//J1011+6529_S_b_map.mod ! Writing 310 model components to file: /image_prod/ug002_uva//J1011+6529_S_b_map.mod wobs /image_prod/ug002_uva//J1011+6529_S_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1011+6529_S_b_uvs.fits wwins /image_prod/ug002_uva//J1011+6529_S_b_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1011+6529_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.104767 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249612 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.714766 0.714766 1.42953 2.85907 5.71813 11.4363 22.8725 45.745 91.4901 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.104 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 419.717 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1011+6529_S_b_dfm.log closed on Wed Mar 4 23:26:11 2020