! Started logfile: /image_prod/ug002_uva//J1008-1629_S_dfm.log on Wed Mar  4 23:24:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1008-1629_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1008-1629_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1008-1629
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1008-1629_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.006203Jy  sigma=7.314853
! Fit after  self-cal, rms=0.925674Jy  sigma=6.690402
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.128 mas, bmaj=15.35 mas, bpa=-16.92 degrees
! Estimated noise=1.957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0616 Jy
! Component: 100  -  total flux cleaned = 0.0769304 Jy
! Total flux subtracted in 100 components = 0.0769304 Jy
! Clean residual min=-0.006842 max=0.015218 Jy/beam
! Clean residual mean=-0.000042 rms=0.002249 Jy/beam
! Combined flux in latest and established models = 0.0769305 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0769305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085702Jy  sigma=0.507942
! Fit after  self-cal, rms=0.085349Jy  sigma=0.505645
! Inverting map 
! Added new window around map position (27.5, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135666 Jy
! Component: 100  -  total flux cleaned = 0.0215069 Jy
! Total flux subtracted in 100 components = 0.0215069 Jy
! Clean residual min=-0.005274 max=0.010744 Jy/beam
! Clean residual mean=-0.000036 rms=0.001657 Jy/beam
! Combined flux in latest and established models = 0.0984373 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 43 components and 0.0984373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083324Jy  sigma=0.482316
! Fit after  self-cal, rms=0.083152Jy  sigma=0.480603
! Inverting map 
! Added new window around map position (9, -4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103476 Jy
! Component: 100  -  total flux cleaned = 0.0171135 Jy
! Total flux subtracted in 100 components = 0.0171135 Jy
! Clean residual min=-0.004211 max=0.004535 Jy/beam
! Clean residual mean=-0.000024 rms=0.001205 Jy/beam
! Combined flux in latest and established models = 0.115551 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.115551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081795Jy  sigma=0.465528
! Fit after  self-cal, rms=0.081690Jy  sigma=0.464599
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.764 mas, bmaj=16.15 mas, bpa=-16.13 degrees
! Estimated noise=1.38919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00729745 Jy
! Component: 100  -  total flux cleaned = 0.0123093 Jy
! Component: 150  -  total flux cleaned = 0.0161554 Jy
! Component: 200  -  total flux cleaned = 0.0192204 Jy
! Total flux subtracted in 200 components = 0.0192204 Jy
! Clean residual min=-0.002988 max=0.003382 Jy/beam
! Clean residual mean=-0.000016 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.134771 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 123 components and 0.134771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080957Jy  sigma=0.455979
! Fit after  self-cal, rms=0.080887Jy  sigma=0.455373
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.764 x 16.15 at -16.13 degrees (North through East)
! Clean map  min=-0.0026325  max=0.078502 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.95     
!   LA        0.96     MK        1.08     NL        0.92     OV        0.95     
!   PT        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.96     HN        1.01     KP        0.97     
!   LA        0.94     MK        1.01     NL        1.07     OV        0.98     
!   PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.08     KP        1.00     
!   LA        0.96     MK        1.05     NL        0.98     OV        1.04     
!   PT        0.98     
! 
! 
! Fit before self-cal, rms=0.080887Jy  sigma=0.455373
! Fit after  self-cal, rms=0.084058Jy  sigma=0.452965
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=16.51 mas, bpa=-16.08 degrees
! Estimated noise=1.37022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199155 Jy
! Component: 100  -  total flux cleaned = 0.00289867 Jy
! Component: 150  -  total flux cleaned = 0.00312502 Jy
! Component: 200  -  total flux cleaned = 0.00317599 Jy
! Total flux subtracted in 200 components = 0.00317599 Jy
! Clean residual min=-0.002374 max=0.002509 Jy/beam
! Clean residual mean=0.000000 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.137947 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 148 components and 0.137947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083960Jy  sigma=0.451973
! Fit after  self-cal, rms=0.084007Jy  sigma=0.451845
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084007Jy  sigma=0.451845
! Fit after  self-cal, rms=0.084972Jy  sigma=0.450627
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.837 mas, bmaj=16.69 mas, bpa=-16.21 degrees
! Estimated noise=1.37663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144448 Jy
! Component: 100  -  total flux cleaned = 0.00179352 Jy
! Component: 150  -  total flux cleaned = 0.00194209 Jy
! Component: 200  -  total flux cleaned = 0.00204154 Jy
! Total flux subtracted in 200 components = 0.00204154 Jy
! Clean residual min=-0.001822 max=0.002172 Jy/beam
! Clean residual mean=0.000002 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.139989 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 176 components and 0.139989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084928Jy  sigma=0.450248
! Fit after  self-cal, rms=0.084943Jy  sigma=0.450172
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368337 Jy
! Component: 100  -  total flux cleaned = 0.00049259 Jy
! Component: 150  -  total flux cleaned = 0.000520663 Jy
! Component: 200  -  total flux cleaned = 0.000520156 Jy
! Total flux subtracted in 200 components = 0.000520156 Jy
! Clean residual min=-0.001738 max=0.002068 Jy/beam
! Clean residual mean=0.000002 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.140509 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 186 components and 0.140509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084919Jy  sigma=0.450016
! Fit after  self-cal, rms=0.084916Jy  sigma=0.450004
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084916Jy  sigma=0.450004
! Fit after  self-cal, rms=0.085072Jy  sigma=0.449966
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.836 mas, bmaj=16.73 mas, bpa=-16.2 degrees
! Estimated noise=1.37225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439555 Jy
! Component: 100  -  total flux cleaned = 0.000608446 Jy
! Component: 150  -  total flux cleaned = 0.00068515 Jy
! Component: 200  -  total flux cleaned = 0.000756215 Jy
! Total flux subtracted in 200 components = 0.000756215 Jy
! Clean residual min=-0.001660 max=0.001962 Jy/beam
! Clean residual mean=0.000002 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.141265 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 192 components and 0.141265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085053Jy  sigma=0.449833
! Fit after  self-cal, rms=0.085052Jy  sigma=0.449823
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127128 Jy
! Component: 100  -  total flux cleaned = 0.000150124 Jy
! Component: 150  -  total flux cleaned = 0.000194288 Jy
! Component: 200  -  total flux cleaned = 0.0001943 Jy
! Total flux subtracted in 200 components = 0.0001943 Jy
! Clean residual min=-0.001631 max=0.001954 Jy/beam
! Clean residual mean=0.000002 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.141459 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 195 components and 0.141459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085036Jy  sigma=0.449745
! Fit after  self-cal, rms=0.085035Jy  sigma=0.449739
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085035Jy  sigma=0.449739
! Fit after  self-cal, rms=0.084950Jy  sigma=0.449728
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.261 mas, bmaj=20.76 mas, bpa=-7.729 degrees
! Estimated noise=1.49596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000320755 Jy
! Component: 100  -  total flux cleaned = 0.000443427 Jy
! Component: 150  -  total flux cleaned = 0.000461358 Jy
! Component: 200  -  total flux cleaned = 0.000431481 Jy
! Total flux subtracted in 200 components = 0.000431481 Jy
! Clean residual min=-0.001781 max=0.001942 Jy/beam
! Clean residual mean=0.000003 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.141891 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 218 components and 0.141891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084947Jy  sigma=0.449677
! Fit after  self-cal, rms=0.084945Jy  sigma=0.449667
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.71132e-05 Jy
! Component: 100  -  total flux cleaned = 3.70252e-05 Jy
! Component: 150  -  total flux cleaned = 9.01256e-06 Jy
! Component: 200  -  total flux cleaned = -1.68724e-05 Jy
! Total flux subtracted in 200 components = -1.68724e-05 Jy
! Clean residual min=-0.001748 max=0.001916 Jy/beam
! Clean residual mean=0.000003 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.141874 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 225 components and 0.141874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084942Jy  sigma=0.449645
! Fit after  self-cal, rms=0.084944Jy  sigma=0.449641
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.832 mas, bmaj=16.75 mas, bpa=-16.19 degrees
! Estimated noise=1.36897 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.832 x 16.75 at -16.19 degrees (North through East)
! Clean map  min=-0.0015461  max=0.077293 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.175 mas, bmaj=15.98 mas, bpa=-16.95 degrees
! Estimated noise=1.94323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0606866 Jy
! Component: 100  -  total flux cleaned = 0.0810837 Jy
! Component: 150  -  total flux cleaned = 0.0941202 Jy
! Component: 200  -  total flux cleaned = 0.103556 Jy
! Total flux subtracted in 200 components = 0.103556 Jy
! Clean residual min=-0.004318 max=0.005937 Jy/beam
! Clean residual mean=-0.000023 rms=0.001313 Jy/beam
! Combined flux in latest and established models = 0.103556 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.103556 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.832 mas, bmaj=16.75 mas, bpa=-16.19 degrees
! Estimated noise=1.36897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00890183 Jy
! Component: 100  -  total flux cleaned = 0.0153493 Jy
! Component: 150  -  total flux cleaned = 0.0202583 Jy
! Component: 200  -  total flux cleaned = 0.0240799 Jy
! Total flux subtracted in 200 components = 0.0240799 Jy
! Clean residual min=-0.002413 max=0.003031 Jy/beam
! Clean residual mean=-0.000012 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.127636 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 92 components and 0.127636 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.261 mas, bmaj=20.76 mas, bpa=-7.729 degrees
! Estimated noise=1.49596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389982 Jy
! Component: 100  -  total flux cleaned = 0.00651555 Jy
! Component: 150  -  total flux cleaned = 0.00845654 Jy
! Component: 200  -  total flux cleaned = 0.00995432 Jy
! Total flux subtracted in 200 components = 0.00995432 Jy
! Clean residual min=-0.001898 max=0.002123 Jy/beam
! Clean residual mean=-0.000004 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.13759 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117367 Jy
! Component: 100  -  total flux cleaned = 0.00210333 Jy
! Component: 150  -  total flux cleaned = 0.00256532 Jy
! Component: 200  -  total flux cleaned = 0.00296391 Jy
! Total flux subtracted in 200 components = 0.00296391 Jy
! Clean residual min=-0.001785 max=0.001925 Jy/beam
! Clean residual mean=0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.140554 Jy
! Adding 117 model components to the UV plane model.
! The established model now contains 206 components and 0.140554 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.832 mas, bmaj=16.75 mas, bpa=-16.19 degrees
! Estimated noise=1.36897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000438669 Jy
! Component: 100  -  total flux cleaned = 0.000669061 Jy
! Component: 150  -  total flux cleaned = 0.000749271 Jy
! Component: 200  -  total flux cleaned = 0.000822444 Jy
! Total flux subtracted in 200 components = 0.000822444 Jy
! Clean residual min=-0.001650 max=0.001917 Jy/beam
! Clean residual mean=0.000002 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.141377 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 223 components and 0.141377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085039Jy  sigma=0.449957
! Fit after  self-cal, rms=0.085007Jy  sigma=0.449897
wmodel J1008-1629_S_map.mod
! Writing 223 model components to file: J1008-1629_S_map.mod
wobs   J1008-1629_S_uvs.fits
! Writing UV FITS file: J1008-1629_S_uvs.fits
wwins  J1008-1629_S_map.win
! wwins: Wrote 3 windows to J1008-1629_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000862196 Jy
! Component: 100  -  total flux cleaned = 0.00136002 Jy
! Component: 150  -  total flux cleaned = 0.00150681 Jy
! Component: 200  -  total flux cleaned = 0.00161927 Jy
! Component: 250  -  total flux cleaned = 0.00161806 Jy
! Component: 300  -  total flux cleaned = 0.00161754 Jy
! Component: 350  -  total flux cleaned = 0.00159159 Jy
! Component: 400  -  total flux cleaned = 0.00154133 Jy
! Component: 450  -  total flux cleaned = 0.00149215 Jy
! Component: 500  -  total flux cleaned = 0.00144433 Jy
! Component: 550  -  total flux cleaned = 0.00142113 Jy
! Component: 600  -  total flux cleaned = 0.00135173 Jy
! Component: 650  -  total flux cleaned = 0.00128377 Jy
! Component: 700  -  total flux cleaned = 0.00130582 Jy
! Component: 750  -  total flux cleaned = 0.00119678 Jy
! Component: 800  -  total flux cleaned = 0.00121888 Jy
! Component: 850  -  total flux cleaned = 0.00121916 Jy
! Component: 900  -  total flux cleaned = 0.0011774 Jy
! Component: 950  -  total flux cleaned = 0.00113635 Jy
! Component: 1000  -  total flux cleaned = 0.00103561 Jy
! Component: 1050  -  total flux cleaned = 0.000877544 Jy
! Component: 1100  -  total flux cleaned = 0.000799996 Jy
! Component: 1150  -  total flux cleaned = 0.000704266 Jy
! Component: 1200  -  total flux cleaned = 0.000647566 Jy
! Component: 1250  -  total flux cleaned = 0.000498467 Jy
! Component: 1300  -  total flux cleaned = 0.000443715 Jy
! Component: 1350  -  total flux cleaned = 0.000334733 Jy
! Component: 1400  -  total flux cleaned = 0.000280997 Jy
! Component: 1450  -  total flux cleaned = 0.00017504 Jy
! Component: 1500  -  total flux cleaned = 0.00014035 Jy
! Component: 1550  -  total flux cleaned = 0.000105637 Jy
! Component: 1600  -  total flux cleaned = 5.47135e-05 Jy
! Component: 1650  -  total flux cleaned = 3.78509e-05 Jy
! Component: 1700  -  total flux cleaned = -2.82218e-05 Jy
! Component: 1750  -  total flux cleaned = -4.45463e-05 Jy
! Component: 1800  -  total flux cleaned = -0.000109226 Jy
! Component: 1850  -  total flux cleaned = -0.000124955 Jy
! Component: 1900  -  total flux cleaned = -7.73443e-05 Jy
! Component: 1950  -  total flux cleaned = -7.75016e-05 Jy
! Component: 2000  -  total flux cleaned = -9.29995e-05 Jy
! Component: 2050  -  total flux cleaned = -6.2278e-05 Jy
! Component: 2100  -  total flux cleaned = -3.18425e-05 Jy
! Component: 2150  -  total flux cleaned = -1.81746e-06 Jy
! Component: 2200  -  total flux cleaned = 4.29426e-05 Jy
! Component: 2250  -  total flux cleaned = 7.26816e-05 Jy
! Component: 2300  -  total flux cleaned = 0.00011686 Jy
! Component: 2350  -  total flux cleaned = 0.000131364 Jy
! Component: 2400  -  total flux cleaned = 0.000189387 Jy
! Component: 2450  -  total flux cleaned = 0.000189417 Jy
! Component: 2500  -  total flux cleaned = 0.000275027 Jy
! Component: 2550  -  total flux cleaned = 0.000289263 Jy
! Component: 2600  -  total flux cleaned = 0.000331179 Jy
! Component: 2650  -  total flux cleaned = 0.000358941 Jy
! Component: 2700  -  total flux cleaned = 0.000331334 Jy
! Component: 2750  -  total flux cleaned = 0.00035896 Jy
! Component: 2800  -  total flux cleaned = 0.000413479 Jy
! Component: 2850  -  total flux cleaned = 0.000372893 Jy
! Component: 2900  -  total flux cleaned = 0.000453622 Jy
! Component: 2950  -  total flux cleaned = 0.000440354 Jy
! Component: 3000  -  total flux cleaned = 0.000466872 Jy
! Component: 3050  -  total flux cleaned = 0.000466779 Jy
! Component: 3100  -  total flux cleaned = 0.000453704 Jy
! Component: 3150  -  total flux cleaned = 0.000479641 Jy
! Component: 3200  -  total flux cleaned = 0.000492639 Jy
! Component: 3250  -  total flux cleaned = 0.000441203 Jy
! Component: 3300  -  total flux cleaned = 0.000402902 Jy
! Component: 3350  -  total flux cleaned = 0.000402867 Jy
! Component: 3400  -  total flux cleaned = 0.000364946 Jy
! Component: 3450  -  total flux cleaned = 0.00036497 Jy
! Component: 3500  -  total flux cleaned = 0.000364985 Jy
! Component: 3550  -  total flux cleaned = 0.000327653 Jy
! Component: 3600  -  total flux cleaned = 0.000302814 Jy
! Component: 3650  -  total flux cleaned = 0.000241352 Jy
! Component: 3700  -  total flux cleaned = 0.000265877 Jy
! Component: 3750  -  total flux cleaned = 0.000241405 Jy
! Component: 3800  -  total flux cleaned = 0.000205068 Jy
! Component: 3850  -  total flux cleaned = 0.000229221 Jy
! Component: 3900  -  total flux cleaned = 0.000169359 Jy
! Component: 3950  -  total flux cleaned = 0.000193193 Jy
! Component: 4000  -  total flux cleaned = 0.000181414 Jy
! Component: 4050  -  total flux cleaned = 0.000169654 Jy
! Total flux subtracted in 4096 components = 0.000169702 Jy
! Clean residual min=-0.000755 max=0.000677 Jy/beam
! Clean residual mean=-0.000002 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.141546 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 492 components and 0.141546 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1008-1629_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.832 x 16.75 at -16.19 degrees (North through East)
! Clean map  min=-0.0016234  max=0.076812 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1008-1629_S_map.fits
wmodel /image_prod/ug002_uva//J1008-1629_S_map.mod
! Writing 492 model components to file: /image_prod/ug002_uva//J1008-1629_S_map.mod
wobs   /image_prod/ug002_uva//J1008-1629_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1008-1629_S_uvs.fits
wwins  /image_prod/ug002_uva//J1008-1629_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1008-1629_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0768122 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000217505 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.849496 0.849496 1.69899 3.39798 6.79597 13.5919 27.1839 54.3677
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  353.15 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1008-1629_S_dfm.log closed on Wed Mar  4 23:24:51 2020