! Started logfile: /image_prod/ug002_uva//J1007-0207_X_dfm.log on Wed Mar  4 23:24:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1007-0207_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1007-0207_X_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.962469 visibilities/baseline/integration-bin.
! Found source: J1007-0207
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23388 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1007-0207_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.083612Jy  sigma=8.412939
! Fit after  self-cal, rms=0.618315Jy  sigma=4.869518
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6512 mas, bmaj=1.703 mas, bpa=-3.402 degrees
! Estimated noise=0.96132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.271257 Jy
! Component: 100  -  total flux cleaned = 0.364044 Jy
! Total flux subtracted in 100 components = 0.364044 Jy
! Clean residual min=-0.019012 max=0.044448 Jy/beam
! Clean residual mean=0.000005 rms=0.003994 Jy/beam
! Combined flux in latest and established models = 0.364044 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.364044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.141187Jy  sigma=1.060630
! Fit after  self-cal, rms=0.141033Jy  sigma=1.059241
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0504833 Jy
! Component: 100  -  total flux cleaned = 0.0782 Jy
! Total flux subtracted in 100 components = 0.0782 Jy
! Clean residual min=-0.014946 max=0.028034 Jy/beam
! Clean residual mean=0.000003 rms=0.002855 Jy/beam
! Combined flux in latest and established models = 0.442244 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.442244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108821Jy  sigma=0.846489
! Fit after  self-cal, rms=0.108630Jy  sigma=0.845404
! Inverting map 
! Added new window around map position (-0.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0256814 Jy
! Component: 100  -  total flux cleaned = 0.0335548 Jy
! Total flux subtracted in 100 components = 0.0335548 Jy
! Clean residual min=-0.013179 max=0.017962 Jy/beam
! Clean residual mean=0.000002 rms=0.002481 Jy/beam
! Combined flux in latest and established models = 0.475799 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.475799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099221Jy  sigma=0.789257
! Fit after  self-cal, rms=0.098980Jy  sigma=0.787402
! Inverting map 
! Added new window around map position (-2.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166664 Jy
! Component: 100  -  total flux cleaned = 0.0252579 Jy
! Total flux subtracted in 100 components = 0.0252579 Jy
! Clean residual min=-0.013331 max=0.015718 Jy/beam
! Clean residual mean=0.000001 rms=0.002270 Jy/beam
! Combined flux in latest and established models = 0.501056 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 26 components and 0.501057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094298Jy  sigma=0.757491
! Fit after  self-cal, rms=0.094195Jy  sigma=0.756678
! Inverting map 
! Added new window around map position (-7, 11.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125156 Jy
! Component: 100  -  total flux cleaned = 0.0185992 Jy
! Total flux subtracted in 100 components = 0.0185992 Jy
! Clean residual min=-0.013541 max=0.014136 Jy/beam
! Clean residual mean=0.000002 rms=0.002106 Jy/beam
! Combined flux in latest and established models = 0.519656 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 35 components and 0.519656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091115Jy  sigma=0.733844
! Fit after  self-cal, rms=0.090916Jy  sigma=0.732392
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8255 mas, bmaj=1.995 mas, bpa=-2.38 degrees
! Estimated noise=0.604789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.8, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165124 Jy
! Component: 100  -  total flux cleaned = 0.0272354 Jy
! Component: 150  -  total flux cleaned = 0.0352523 Jy
! Component: 200  -  total flux cleaned = 0.0414926 Jy
! Total flux subtracted in 200 components = 0.0414926 Jy
! Clean residual min=-0.014740 max=0.012052 Jy/beam
! Clean residual mean=0.000008 rms=0.002479 Jy/beam
! Combined flux in latest and established models = 0.561148 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 49 components and 0.561148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086967Jy  sigma=0.705743
! Fit after  self-cal, rms=0.086877Jy  sigma=0.705130
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8255 x 1.995 at -2.38 degrees (North through East)
! Clean map  min=-0.01367  max=0.38272 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.02     HN        0.98     KP        1.06     
!   LA        0.99     MK        1.01     NL        1.09     OV        1.12     
!   PT        0.90     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.00     HN        0.96     KP        1.04     
!   LA        1.00     MK        0.99     NL        1.08     OV        1.10     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        0.96     KP        1.05     
!   LA        0.99     MK        1.00     NL        1.08     OV        1.08     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        0.99     KP        1.03     
!   LA        1.02     MK        1.01     NL        1.05     OV        1.09     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.04     HN        0.94     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.06     OV        1.08     
!   PT        0.89     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.03     HN        0.93     KP        1.02     
!   LA        0.95     MK        1.00     NL        1.09     OV        1.08     
!   PT        0.89     SC        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.01     HN        0.93     KP        1.03     
!   LA        0.96     MK        1.07     NL        1.10     OV        1.06     
!   PT        0.88     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     HN        0.94     KP        1.05     
!   LA        0.99     MK        1.00     NL        1.06     OV        1.08     
!   PT        0.90     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        0.99     KP        1.01     
!   LA        0.99     MK        0.99     NL        1.05     OV        1.04     
!   PT        0.90     SC        1.10     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        0.96     KP        1.03     
!   LA        0.97     MK        1.04     NL        1.08     OV        1.07     
!   PT        0.89     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        0.94     KP        1.02     
!   LA        0.99     MK        1.00     NL        1.04     OV        1.05     
!   PT        0.93     SC        1.10     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.97     HN        0.97     KP        1.05     
!   LA        0.96     MK        1.05     NL        1.08     OV        1.08     
!   PT        0.89     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.086877Jy  sigma=0.705130
! Fit after  self-cal, rms=0.080836Jy  sigma=0.652645
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8314 mas, bmaj=1.999 mas, bpa=-2.571 degrees
! Estimated noise=0.606387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010532 Jy
! Component: 100  -  total flux cleaned = 0.0139712 Jy
! Component: 150  -  total flux cleaned = 0.0165936 Jy
! Component: 200  -  total flux cleaned = 0.0181532 Jy
! Total flux subtracted in 200 components = 0.0181532 Jy
! Clean residual min=-0.007652 max=0.006742 Jy/beam
! Clean residual mean=0.000002 rms=0.001568 Jy/beam
! Combined flux in latest and established models = 0.579302 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 81 components and 0.579302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079240Jy  sigma=0.641631
! Fit after  self-cal, rms=0.079157Jy  sigma=0.640972
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079157Jy  sigma=0.640972
! Fit after  self-cal, rms=0.078944Jy  sigma=0.593295
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8341 mas, bmaj=2.007 mas, bpa=-2.82 degrees
! Estimated noise=0.61068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00094077 Jy
! Component: 100  -  total flux cleaned = 0.00201784 Jy
! Component: 150  -  total flux cleaned = 0.00307724 Jy
! Component: 200  -  total flux cleaned = 0.0037909 Jy
! Total flux subtracted in 200 components = 0.0037909 Jy
! Clean residual min=-0.004151 max=0.004273 Jy/beam
! Clean residual mean=0.000001 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.583093 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 109 components and 0.583092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078346Jy  sigma=0.589746
! Fit after  self-cal, rms=0.078336Jy  sigma=0.589608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-16.8, -25.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183929 Jy
! Component: 100  -  total flux cleaned = 0.00206481 Jy
! Component: 150  -  total flux cleaned = 0.00259227 Jy
! Component: 200  -  total flux cleaned = 0.00316699 Jy
! Total flux subtracted in 200 components = 0.00316699 Jy
! Clean residual min=-0.003738 max=0.003957 Jy/beam
! Clean residual mean=0.000002 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.586259 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 132 components and 0.586259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077980Jy  sigma=0.587335
! Fit after  self-cal, rms=0.077961Jy  sigma=0.587211
! Inverting map 
! Added new window around map position (25.8, 21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301176 Jy
! Component: 100  -  total flux cleaned = 0.00359438 Jy
! Component: 150  -  total flux cleaned = 0.00385539 Jy
! Component: 200  -  total flux cleaned = 0.00409742 Jy
! Total flux subtracted in 200 components = 0.00409742 Jy
! Clean residual min=-0.003471 max=0.003571 Jy/beam
! Clean residual mean=0.000002 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.590357 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 159 components and 0.590357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077705Jy  sigma=0.585453
! Fit after  self-cal, rms=0.077690Jy  sigma=0.585358
! Inverting map 
! Added new window around map position (-20.6, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00326718 Jy
! Component: 100  -  total flux cleaned = 0.00405449 Jy
! Component: 150  -  total flux cleaned = 0.00421247 Jy
! Component: 200  -  total flux cleaned = 0.00436197 Jy
! Total flux subtracted in 200 components = 0.00436197 Jy
! Clean residual min=-0.003304 max=0.003310 Jy/beam
! Clean residual mean=0.000001 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.594719 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 179 components and 0.594719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077478Jy  sigma=0.583873
! Fit after  self-cal, rms=0.077471Jy  sigma=0.583808
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077471Jy  sigma=0.583808
! Fit after  self-cal, rms=0.080942Jy  sigma=0.571698
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8364 mas, bmaj=2.01 mas, bpa=-2.937 degrees
! Estimated noise=0.613123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00226057 Jy
! Component: 100  -  total flux cleaned = -0.0024934 Jy
! Component: 150  -  total flux cleaned = -0.00231386 Jy
! Component: 200  -  total flux cleaned = -0.00231739 Jy
! Total flux subtracted in 200 components = -0.00231739 Jy
! Clean residual min=-0.003185 max=0.002419 Jy/beam
! Clean residual mean=0.000001 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.592401 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 192 components and 0.592401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080611Jy  sigma=0.569980
! Fit after  self-cal, rms=0.080614Jy  sigma=0.569932
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000283971 Jy
! Component: 100  -  total flux cleaned = 0.000485618 Jy
! Component: 150  -  total flux cleaned = 0.000733635 Jy
! Component: 200  -  total flux cleaned = 0.000904268 Jy
! Total flux subtracted in 200 components = 0.000904268 Jy
! Clean residual min=-0.002957 max=0.002243 Jy/beam
! Clean residual mean=0.000001 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.593305 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 200 components and 0.593306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080490Jy  sigma=0.569390
! Fit after  self-cal, rms=0.080487Jy  sigma=0.569373
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080487Jy  sigma=0.569373
! Fit after  self-cal, rms=0.081477Jy  sigma=0.568825
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.083 mas, bmaj=3.415 mas, bpa=3.272 degrees
! Estimated noise=0.812839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00188261 Jy
! Component: 100  -  total flux cleaned = -0.00153346 Jy
! Component: 150  -  total flux cleaned = -0.00114231 Jy
! Component: 200  -  total flux cleaned = -0.000937388 Jy
! Total flux subtracted in 200 components = -0.000937388 Jy
! Clean residual min=-0.002692 max=0.002233 Jy/beam
! Clean residual mean=0.000002 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.592368 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 221 components and 0.592368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081340Jy  sigma=0.568597
! Fit after  self-cal, rms=0.081336Jy  sigma=0.568557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328497 Jy
! Component: 100  -  total flux cleaned = 0.000443128 Jy
! Component: 150  -  total flux cleaned = 0.000443158 Jy
! Component: 200  -  total flux cleaned = 0.000587471 Jy
! Total flux subtracted in 200 components = 0.000587471 Jy
! Clean residual min=-0.002338 max=0.001983 Jy/beam
! Clean residual mean=0.000001 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.592956 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 242 components and 0.592956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081285Jy  sigma=0.568516
! Fit after  self-cal, rms=0.081281Jy  sigma=0.568485
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.837 mas, bmaj=2.011 mas, bpa=-2.981 degrees
! Estimated noise=0.614316 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.837 x 2.011 at -2.981 degrees (North through East)
! Clean map  min=-0.0023337  max=0.38973 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6592 mas, bmaj=1.715 mas, bpa=-3.981 degrees
! Estimated noise=0.981341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.276831 Jy
! Component: 100  -  total flux cleaned = 0.368038 Jy
! Component: 150  -  total flux cleaned = 0.41851 Jy
! Component: 200  -  total flux cleaned = 0.44867 Jy
! Total flux subtracted in 200 components = 0.44867 Jy
! Clean residual min=-0.007442 max=0.016645 Jy/beam
! Clean residual mean=0.000001 rms=0.001816 Jy/beam
! Combined flux in latest and established models = 0.44867 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.44867 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.837 mas, bmaj=2.011 mas, bpa=-2.981 degrees
! Estimated noise=0.614316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0325332 Jy
! Component: 100  -  total flux cleaned = 0.0523945 Jy
! Component: 150  -  total flux cleaned = 0.0664039 Jy
! Component: 200  -  total flux cleaned = 0.0772796 Jy
! Total flux subtracted in 200 components = 0.0772796 Jy
! Clean residual min=-0.005255 max=0.007613 Jy/beam
! Clean residual mean=0.000002 rms=0.001267 Jy/beam
! Combined flux in latest and established models = 0.52595 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 38 components and 0.52595 Jy
! Inverting map 
! Added new window around map position (-2, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00915847 Jy
! Component: 100  -  total flux cleaned = 0.0166182 Jy
! Component: 150  -  total flux cleaned = 0.0228942 Jy
! Component: 200  -  total flux cleaned = 0.0282688 Jy
! Total flux subtracted in 200 components = 0.0282688 Jy
! Clean residual min=-0.003983 max=0.004407 Jy/beam
! Clean residual mean=0.000001 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.554219 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 79 components and 0.554218 Jy
! Inverting map 
! Added new window around map position (-7.6, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494495 Jy
! Component: 100  -  total flux cleaned = 0.00909233 Jy
! Component: 150  -  total flux cleaned = 0.0127169 Jy
! Component: 200  -  total flux cleaned = 0.0156853 Jy
! Total flux subtracted in 200 components = 0.0156853 Jy
! Clean residual min=-0.003176 max=0.002896 Jy/beam
! Clean residual mean=0.000001 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.569904 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 113 components and 0.569903 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.083 mas, bmaj=3.415 mas, bpa=3.272 degrees
! Estimated noise=0.812839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00525607 Jy
! Component: 100  -  total flux cleaned = 0.00912257 Jy
! Component: 150  -  total flux cleaned = 0.0116544 Jy
! Component: 200  -  total flux cleaned = 0.0135058 Jy
! Total flux subtracted in 200 components = 0.0135058 Jy
! Clean residual min=-0.002517 max=0.002963 Jy/beam
! Clean residual mean=0.000001 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.583409 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15.6, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024123 Jy
! Component: 100  -  total flux cleaned = 0.00370883 Jy
! Component: 150  -  total flux cleaned = 0.00483827 Jy
! Component: 200  -  total flux cleaned = 0.00578711 Jy
! Total flux subtracted in 200 components = 0.00578711 Jy
! Clean residual min=-0.002150 max=0.002153 Jy/beam
! Clean residual mean=0.000000 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.589196 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 182 components and 0.589196 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.837 mas, bmaj=2.011 mas, bpa=-2.981 degrees
! Estimated noise=0.614316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259372 Jy
! Component: 100  -  total flux cleaned = 0.00060451 Jy
! Component: 150  -  total flux cleaned = 0.00110253 Jy
! Component: 200  -  total flux cleaned = 0.00150592 Jy
! Total flux subtracted in 200 components = 0.00150592 Jy
! Clean residual min=-0.002802 max=0.002072 Jy/beam
! Clean residual mean=-0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.590702 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 212 components and 0.590702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081064Jy  sigma=0.567760
! Fit after  self-cal, rms=0.081008Jy  sigma=0.567361
wmodel J1007-0207_X_map.mod
! Writing 212 model components to file: J1007-0207_X_map.mod
wobs   J1007-0207_X_uvs.fits
! Writing UV FITS file: J1007-0207_X_uvs.fits
wwins  J1007-0207_X_map.win
! wwins: Wrote 12 windows to J1007-0207_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102636 Jy
! Component: 100  -  total flux cleaned = -0.00109646 Jy
! Component: 150  -  total flux cleaned = -0.0011292 Jy
! Component: 200  -  total flux cleaned = -0.0012211 Jy
! Component: 250  -  total flux cleaned = -0.00139634 Jy
! Component: 300  -  total flux cleaned = -0.00142418 Jy
! Component: 350  -  total flux cleaned = -0.00153462 Jy
! Component: 400  -  total flux cleaned = -0.00156056 Jy
! Component: 450  -  total flux cleaned = -0.00150788 Jy
! Component: 500  -  total flux cleaned = -0.00153334 Jy
! Component: 550  -  total flux cleaned = -0.00153304 Jy
! Component: 600  -  total flux cleaned = -0.00150817 Jy
! Component: 650  -  total flux cleaned = -0.00143649 Jy
! Component: 700  -  total flux cleaned = -0.00143709 Jy
! Component: 750  -  total flux cleaned = -0.00143749 Jy
! Component: 800  -  total flux cleaned = -0.00141475 Jy
! Component: 850  -  total flux cleaned = -0.00136973 Jy
! Component: 900  -  total flux cleaned = -0.00134744 Jy
! Component: 950  -  total flux cleaned = -0.00128227 Jy
! Component: 1000  -  total flux cleaned = -0.001261 Jy
! Component: 1050  -  total flux cleaned = -0.00121851 Jy
! Component: 1100  -  total flux cleaned = -0.00119745 Jy
! Component: 1150  -  total flux cleaned = -0.00113593 Jy
! Component: 1200  -  total flux cleaned = -0.00119693 Jy
! Component: 1250  -  total flux cleaned = -0.00117658 Jy
! Component: 1300  -  total flux cleaned = -0.00121592 Jy
! Component: 1350  -  total flux cleaned = -0.00111821 Jy
! Component: 1400  -  total flux cleaned = -0.00115647 Jy
! Component: 1450  -  total flux cleaned = -0.00108014 Jy
! Component: 1500  -  total flux cleaned = -0.00102364 Jy
! Component: 1550  -  total flux cleaned = -0.000986386 Jy
! Component: 1600  -  total flux cleaned = -0.00096771 Jy
! Component: 1650  -  total flux cleaned = -0.000857447 Jy
! Component: 1700  -  total flux cleaned = -0.000803201 Jy
! Component: 1750  -  total flux cleaned = -0.000856965 Jy
! Component: 1800  -  total flux cleaned = -0.000821028 Jy
! Component: 1850  -  total flux cleaned = -0.000750674 Jy
! Component: 1900  -  total flux cleaned = -0.000715429 Jy
! Component: 1950  -  total flux cleaned = -0.000767461 Jy
! Component: 2000  -  total flux cleaned = -0.000733009 Jy
! Component: 2050  -  total flux cleaned = -0.000681935 Jy
! Component: 2100  -  total flux cleaned = -0.000665097 Jy
! Component: 2150  -  total flux cleaned = -0.000681777 Jy
! Component: 2200  -  total flux cleaned = -0.000665126 Jy
! Component: 2250  -  total flux cleaned = -0.000665209 Jy
! Component: 2300  -  total flux cleaned = -0.000746524 Jy
! Component: 2350  -  total flux cleaned = -0.000697908 Jy
! Component: 2400  -  total flux cleaned = -0.000777978 Jy
! Component: 2450  -  total flux cleaned = -0.00073035 Jy
! Component: 2500  -  total flux cleaned = -0.000793541 Jy
! Component: 2550  -  total flux cleaned = -0.000777956 Jy
! Component: 2600  -  total flux cleaned = -0.000715802 Jy
! Component: 2650  -  total flux cleaned = -0.00077732 Jy
! Component: 2700  -  total flux cleaned = -0.000746651 Jy
! Component: 2750  -  total flux cleaned = -0.000761773 Jy
! Component: 2800  -  total flux cleaned = -0.000792058 Jy
! Component: 2850  -  total flux cleaned = -0.000821707 Jy
! Component: 2900  -  total flux cleaned = -0.000777164 Jy
! Component: 2950  -  total flux cleaned = -0.000718128 Jy
! Component: 3000  -  total flux cleaned = -0.000747163 Jy
! Component: 3050  -  total flux cleaned = -0.000761746 Jy
! Component: 3100  -  total flux cleaned = -0.000704304 Jy
! Component: 3150  -  total flux cleaned = -0.000718416 Jy
! Component: 3200  -  total flux cleaned = -0.000760689 Jy
! Component: 3250  -  total flux cleaned = -0.000676248 Jy
! Component: 3300  -  total flux cleaned = -0.000662318 Jy
! Component: 3350  -  total flux cleaned = -0.00070389 Jy
! Component: 3400  -  total flux cleaned = -0.000731453 Jy
! Component: 3450  -  total flux cleaned = -0.000662995 Jy
! Component: 3500  -  total flux cleaned = -0.000649347 Jy
! Component: 3550  -  total flux cleaned = -0.0006764 Jy
! Component: 3600  -  total flux cleaned = -0.000622766 Jy
! Component: 3650  -  total flux cleaned = -0.000609418 Jy
! Component: 3700  -  total flux cleaned = -0.000662513 Jy
! Component: 3750  -  total flux cleaned = -0.00054381 Jy
! Component: 3800  -  total flux cleaned = -0.000517715 Jy
! Component: 3850  -  total flux cleaned = -0.000543808 Jy
! Component: 3900  -  total flux cleaned = -0.000569772 Jy
! Component: 3950  -  total flux cleaned = -0.000544036 Jy
! Component: 4000  -  total flux cleaned = -0.000492899 Jy
! Component: 4050  -  total flux cleaned = -0.000505469 Jy
! Total flux subtracted in 4096 components = -0.000505471 Jy
! Clean residual min=-0.000813 max=0.000767 Jy/beam
! Clean residual mean=-0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.590197 Jy
keep
! Adding 332 model components to the UV plane model.
! The established model now contains 544 components and 0.590197 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1007-0207_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.837 x 2.011 at -2.981 degrees (North through East)
! Clean map  min=-0.0014066  max=0.39101 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1007-0207_X_map.fits
wmodel /image_prod/ug002_uva//J1007-0207_X_map.mod
! Writing 544 model components to file: /image_prod/ug002_uva//J1007-0207_X_map.mod
wobs   /image_prod/ug002_uva//J1007-0207_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1007-0207_X_uvs.fits
wwins  /image_prod/ug002_uva//J1007-0207_X_map.win
! wwins: Wrote 13 windows to /image_prod/ug002_uva//J1007-0207_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.391014 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000217985 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.167246 0.167246 0.334492 0.668985 1.33797 2.67594 5.35188 10.7038 21.4075 42.815 85.63
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.391 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1793.76 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1007-0207_X_dfm.log closed on Wed Mar  4 23:24:15 2020