! Started logfile: /image_prod/ug002_uva//J1001+1015_S_dfm.log on Wed Mar  4 23:21:30 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1001+1015_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1001+1015_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.840278 visibilities/baseline/integration-bin.
! Found source: J1001+1015
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5445 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1001+1015_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022060Jy  sigma=9.015238
! Fit after  self-cal, rms=0.876320Jy  sigma=7.595543
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.247 mas, bmaj=12 mas, bpa=-18.39 degrees
! Estimated noise=1.44596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117036 Jy
! Component: 100  -  total flux cleaned = 0.169225 Jy
! Total flux subtracted in 100 components = 0.169225 Jy
! Clean residual min=-0.012381 max=0.027952 Jy/beam
! Clean residual mean=-0.000030 rms=0.003838 Jy/beam
! Combined flux in latest and established models = 0.169225 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.169225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097553Jy  sigma=0.795863
! Fit after  self-cal, rms=0.086047Jy  sigma=0.724165
! Inverting map 
! Added new window around map position (-3.5, -11.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0398851 Jy
! Component: 100  -  total flux cleaned = 0.0622184 Jy
! Total flux subtracted in 100 components = 0.0622184 Jy
! Clean residual min=-0.006667 max=0.011854 Jy/beam
! Clean residual mean=-0.000004 rms=0.001840 Jy/beam
! Combined flux in latest and established models = 0.231443 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.231443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063066Jy  sigma=0.513508
! Fit after  self-cal, rms=0.062047Jy  sigma=0.506469
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151261 Jy
! Component: 100  -  total flux cleaned = 0.0249551 Jy
! Total flux subtracted in 100 components = 0.0249551 Jy
! Clean residual min=-0.004353 max=0.005266 Jy/beam
! Clean residual mean=0.000004 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.256398 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.256398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057581Jy  sigma=0.466615
! Fit after  self-cal, rms=0.057503Jy  sigma=0.466249
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.802 mas, bmaj=12.34 mas, bpa=-18.42 degrees
! Estimated noise=1.11435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00726782 Jy
! Component: 100  -  total flux cleaned = 0.00958398 Jy
! Component: 150  -  total flux cleaned = 0.00975446 Jy
! Component: 200  -  total flux cleaned = 0.00936485 Jy
! Total flux subtracted in 200 components = 0.00936485 Jy
! Clean residual min=-0.003104 max=0.003261 Jy/beam
! Clean residual mean=0.000007 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.265763 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 57 components and 0.265763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056192Jy  sigma=0.456143
! Fit after  self-cal, rms=0.056161Jy  sigma=0.455975
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.802 x 12.34 at -18.42 degrees (North through East)
! Clean map  min=-0.002888  max=0.13183 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        0.98     
!   LA        1.02     MK        1.03     NL        0.91     OV        1.00     
!   PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.03     MK        1.02     NL        0.89     OV        0.96     
!   PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.04     MK        1.04     NL        0.85     OV        1.01     
!   PT        1.03     
! 
! 
! Fit before self-cal, rms=0.056161Jy  sigma=0.455975
! Fit after  self-cal, rms=0.053488Jy  sigma=0.448369
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=12.34 mas, bpa=-18.43 degrees
! Estimated noise=1.08409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000399714 Jy
! Component: 100  -  total flux cleaned = -0.000450011 Jy
! Component: 150  -  total flux cleaned = -0.000493501 Jy
! Component: 200  -  total flux cleaned = -0.000534377 Jy
! Total flux subtracted in 200 components = -0.000534377 Jy
! Clean residual min=-0.002173 max=0.002367 Jy/beam
! Clean residual mean=0.000001 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.265229 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 0.265229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053372Jy  sigma=0.447552
! Fit after  self-cal, rms=0.053376Jy  sigma=0.447436
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053376Jy  sigma=0.447436
! Fit after  self-cal, rms=0.053098Jy  sigma=0.444636
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.846 mas, bmaj=12.31 mas, bpa=-18.45 degrees
! Estimated noise=1.08315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000239015 Jy
! Component: 100  -  total flux cleaned = -0.000319079 Jy
! Component: 150  -  total flux cleaned = -0.000420503 Jy
! Component: 200  -  total flux cleaned = -0.000482179 Jy
! Total flux subtracted in 200 components = -0.000482179 Jy
! Clean residual min=-0.001817 max=0.002103 Jy/beam
! Clean residual mean=-0.000001 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.264746 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 78 components and 0.264746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053046Jy  sigma=0.444294
! Fit after  self-cal, rms=0.053046Jy  sigma=0.444259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (126.5, -29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000828977 Jy
! Component: 100  -  total flux cleaned = 0.000920974 Jy
! Component: 150  -  total flux cleaned = 0.00088333 Jy
! Component: 200  -  total flux cleaned = 0.000782394 Jy
! Total flux subtracted in 200 components = 0.000782394 Jy
! Clean residual min=-0.001738 max=0.001692 Jy/beam
! Clean residual mean=-0.000001 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.265529 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.265529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052948Jy  sigma=0.443435
! Fit after  self-cal, rms=0.052946Jy  sigma=0.443400
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052946Jy  sigma=0.443400
! Fit after  self-cal, rms=0.052871Jy  sigma=0.443348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.845 mas, bmaj=12.3 mas, bpa=-18.45 degrees
! Estimated noise=1.08182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147415 Jy
! Component: 100  -  total flux cleaned = 5.50888e-05 Jy
! Component: 150  -  total flux cleaned = -2.93256e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109456 Jy
! Total flux subtracted in 200 components = -0.000109456 Jy
! Clean residual min=-0.001693 max=0.001628 Jy/beam
! Clean residual mean=-0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.265419 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.265419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052838Jy  sigma=0.443103
! Fit after  self-cal, rms=0.052837Jy  sigma=0.443098
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.57595e-05 Jy
! Component: 100  -  total flux cleaned = 1.13369e-05 Jy
! Component: 150  -  total flux cleaned = -8.26404e-05 Jy
! Component: 200  -  total flux cleaned = -0.000149336 Jy
! Total flux subtracted in 200 components = -0.000149336 Jy
! Clean residual min=-0.001632 max=0.001557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.26527 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 107 components and 0.26527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052816Jy  sigma=0.442948
! Fit after  self-cal, rms=0.052816Jy  sigma=0.442947
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052816Jy  sigma=0.442947
! Fit after  self-cal, rms=0.052778Jy  sigma=0.442937
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.974 mas, bmaj=12.81 mas, bpa=-15.22 degrees
! Estimated noise=1.24976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190161 Jy
! Component: 100  -  total flux cleaned = -0.000234615 Jy
! Component: 150  -  total flux cleaned = -0.000260253 Jy
! Component: 200  -  total flux cleaned = -0.000283322 Jy
! Total flux subtracted in 200 components = -0.000283322 Jy
! Clean residual min=-0.001331 max=0.001367 Jy/beam
! Clean residual mean=-0.000005 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.264987 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 129 components and 0.264987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052773Jy  sigma=0.442905
! Fit after  self-cal, rms=0.052773Jy  sigma=0.442902
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013415 Jy
! Component: 100  -  total flux cleaned = -0.000164257 Jy
! Component: 150  -  total flux cleaned = -0.000164562 Jy
! Component: 200  -  total flux cleaned = -0.000181261 Jy
! Total flux subtracted in 200 components = -0.000181261 Jy
! Clean residual min=-0.001356 max=0.001356 Jy/beam
! Clean residual mean=-0.000005 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.264805 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 144 components and 0.264805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052771Jy  sigma=0.442894
! Fit after  self-cal, rms=0.052771Jy  sigma=0.442892
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.844 mas, bmaj=12.3 mas, bpa=-18.45 degrees
! Estimated noise=1.08092 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.844 x 12.3 at -18.45 degrees (North through East)
! Clean map  min=-0.0015445  max=0.1301 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.28 mas, bmaj=11.99 mas, bpa=-18.47 degrees
! Estimated noise=1.41187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122974 Jy
! Component: 100  -  total flux cleaned = 0.180233 Jy
! Component: 150  -  total flux cleaned = 0.210401 Jy
! Component: 200  -  total flux cleaned = 0.228808 Jy
! Total flux subtracted in 200 components = 0.228808 Jy
! Clean residual min=-0.005112 max=0.009733 Jy/beam
! Clean residual mean=-0.000006 rms=0.001360 Jy/beam
! Combined flux in latest and established models = 0.228808 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.228808 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.844 mas, bmaj=12.3 mas, bpa=-18.45 degrees
! Estimated noise=1.08092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137299 Jy
! Component: 100  -  total flux cleaned = 0.0219729 Jy
! Component: 150  -  total flux cleaned = 0.0270213 Jy
! Component: 200  -  total flux cleaned = 0.030086 Jy
! Total flux subtracted in 200 components = 0.030086 Jy
! Clean residual min=-0.001999 max=0.002260 Jy/beam
! Clean residual mean=-0.000004 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.258894 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 56 components and 0.258894 Jy
! Inverting map 
! Added new window around map position (118.5, -98).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166913 Jy
! Component: 100  -  total flux cleaned = 0.0026999 Jy
! Component: 150  -  total flux cleaned = 0.00375737 Jy
! Component: 200  -  total flux cleaned = 0.00462003 Jy
! Total flux subtracted in 200 components = 0.00462003 Jy
! Clean residual min=-0.001790 max=0.001622 Jy/beam
! Clean residual mean=-0.000003 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.263514 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 77 components and 0.263514 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.974 mas, bmaj=12.81 mas, bpa=-15.22 degrees
! Estimated noise=1.24976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120612 Jy
! Component: 100  -  total flux cleaned = 0.00196378 Jy
! Component: 150  -  total flux cleaned = 0.00232967 Jy
! Component: 200  -  total flux cleaned = 0.00261228 Jy
! Total flux subtracted in 200 components = 0.00261228 Jy
! Clean residual min=-0.001272 max=0.001525 Jy/beam
! Clean residual mean=-0.000004 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.266126 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164974 Jy
! Component: 100  -  total flux cleaned = 0.000265186 Jy
! Component: 150  -  total flux cleaned = 0.00035493 Jy
! Component: 200  -  total flux cleaned = 0.000416744 Jy
! Total flux subtracted in 200 components = 0.000416744 Jy
! Clean residual min=-0.001158 max=0.001421 Jy/beam
! Clean residual mean=-0.000004 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.266543 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 134 components and 0.266543 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.844 mas, bmaj=12.3 mas, bpa=-18.45 degrees
! Estimated noise=1.08092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00036996 Jy
! Component: 100  -  total flux cleaned = -0.000324522 Jy
! Component: 150  -  total flux cleaned = -0.000322045 Jy
! Component: 200  -  total flux cleaned = -0.000247563 Jy
! Total flux subtracted in 200 components = -0.000247563 Jy
! Clean residual min=-0.001655 max=0.001458 Jy/beam
! Clean residual mean=-0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.266295 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 157 components and 0.266295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052781Jy  sigma=0.442994
! Fit after  self-cal, rms=0.052771Jy  sigma=0.442875
wmodel J1001+1015_S_map.mod
! Writing 157 model components to file: J1001+1015_S_map.mod
wobs   J1001+1015_S_uvs.fits
! Writing UV FITS file: J1001+1015_S_uvs.fits
wwins  J1001+1015_S_map.win
! wwins: Wrote 4 windows to J1001+1015_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000425784 Jy
! Component: 100  -  total flux cleaned = -0.000477638 Jy
! Component: 150  -  total flux cleaned = -0.000552954 Jy
! Component: 200  -  total flux cleaned = -0.000577195 Jy
! Component: 250  -  total flux cleaned = -0.000646844 Jy
! Component: 300  -  total flux cleaned = -0.000647439 Jy
! Component: 350  -  total flux cleaned = -0.0006253 Jy
! Component: 400  -  total flux cleaned = -0.000519751 Jy
! Component: 450  -  total flux cleaned = -0.000478742 Jy
! Component: 500  -  total flux cleaned = -0.000478562 Jy
! Component: 550  -  total flux cleaned = -0.000517253 Jy
! Component: 600  -  total flux cleaned = -0.000497854 Jy
! Component: 650  -  total flux cleaned = -0.000591435 Jy
! Component: 700  -  total flux cleaned = -0.000628417 Jy
! Component: 750  -  total flux cleaned = -0.000682691 Jy
! Component: 800  -  total flux cleaned = -0.000754389 Jy
! Component: 850  -  total flux cleaned = -0.00084197 Jy
! Component: 900  -  total flux cleaned = -0.000927915 Jy
! Component: 950  -  total flux cleaned = -0.000961773 Jy
! Component: 1000  -  total flux cleaned = -0.0010284 Jy
! Component: 1050  -  total flux cleaned = -0.00107755 Jy
! Component: 1100  -  total flux cleaned = -0.0011582 Jy
! Component: 1150  -  total flux cleaned = -0.00117429 Jy
! Component: 1200  -  total flux cleaned = -0.00129959 Jy
! Component: 1250  -  total flux cleaned = -0.00134566 Jy
! Component: 1300  -  total flux cleaned = -0.00136103 Jy
! Component: 1350  -  total flux cleaned = -0.00143669 Jy
! Component: 1400  -  total flux cleaned = -0.00146677 Jy
! Component: 1450  -  total flux cleaned = -0.00156956 Jy
! Component: 1500  -  total flux cleaned = -0.0015407 Jy
! Component: 1550  -  total flux cleaned = -0.00161241 Jy
! Component: 1600  -  total flux cleaned = -0.00166882 Jy
! Component: 1650  -  total flux cleaned = -0.00166893 Jy
! Component: 1700  -  total flux cleaned = -0.00168283 Jy
! Component: 1750  -  total flux cleaned = -0.00172395 Jy
! Component: 1800  -  total flux cleaned = -0.00173731 Jy
! Component: 1850  -  total flux cleaned = -0.00180407 Jy
! Component: 1900  -  total flux cleaned = -0.00183043 Jy
! Component: 1950  -  total flux cleaned = -0.0018564 Jy
! Component: 2000  -  total flux cleaned = -0.0019082 Jy
! Component: 2050  -  total flux cleaned = -0.00194654 Jy
! Component: 2100  -  total flux cleaned = -0.00194654 Jy
! Component: 2150  -  total flux cleaned = -0.00198434 Jy
! Component: 2200  -  total flux cleaned = -0.00198456 Jy
! Component: 2250  -  total flux cleaned = -0.00203382 Jy
! Component: 2300  -  total flux cleaned = -0.00204607 Jy
! Component: 2350  -  total flux cleaned = -0.00209443 Jy
! Component: 2400  -  total flux cleaned = -0.00209456 Jy
! Component: 2450  -  total flux cleaned = -0.00209473 Jy
! Component: 2500  -  total flux cleaned = -0.00209482 Jy
! Component: 2550  -  total flux cleaned = -0.00209485 Jy
! Component: 2600  -  total flux cleaned = -0.002118 Jy
! Component: 2650  -  total flux cleaned = -0.00214084 Jy
! Component: 2700  -  total flux cleaned = -0.00212947 Jy
! Component: 2750  -  total flux cleaned = -0.00212947 Jy
! Component: 2800  -  total flux cleaned = -0.00214075 Jy
! Component: 2850  -  total flux cleaned = -0.00216272 Jy
! Component: 2900  -  total flux cleaned = -0.00214093 Jy
! Component: 2950  -  total flux cleaned = -0.00217361 Jy
! Component: 3000  -  total flux cleaned = -0.00216287 Jy
! Component: 3050  -  total flux cleaned = -0.00218423 Jy
! Component: 3100  -  total flux cleaned = -0.00217353 Jy
! Component: 3150  -  total flux cleaned = -0.00218408 Jy
! Component: 3200  -  total flux cleaned = -0.00217372 Jy
! Component: 3250  -  total flux cleaned = -0.00217391 Jy
! Component: 3300  -  total flux cleaned = -0.0021329 Jy
! Component: 3350  -  total flux cleaned = -0.00217359 Jy
! Component: 3400  -  total flux cleaned = -0.00218381 Jy
! Component: 3450  -  total flux cleaned = -0.00220369 Jy
! Component: 3500  -  total flux cleaned = -0.00218378 Jy
! Component: 3550  -  total flux cleaned = -0.00222334 Jy
! Component: 3600  -  total flux cleaned = -0.00218415 Jy
! Component: 3650  -  total flux cleaned = -0.00220365 Jy
! Component: 3700  -  total flux cleaned = -0.00214584 Jy
! Component: 3750  -  total flux cleaned = -0.00216495 Jy
! Component: 3800  -  total flux cleaned = -0.00211745 Jy
! Component: 3850  -  total flux cleaned = -0.00212688 Jy
! Component: 3900  -  total flux cleaned = -0.00208927 Jy
! Component: 3950  -  total flux cleaned = -0.00207064 Jy
! Component: 4000  -  total flux cleaned = -0.00202439 Jy
! Component: 4050  -  total flux cleaned = -0.00202439 Jy
! Total flux subtracted in 4096 components = -0.0020151 Jy
! Clean residual min=-0.000469 max=0.000490 Jy/beam
! Clean residual mean=0.000002 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.26428 Jy
keep
! Adding 253 model components to the UV plane model.
! The established model now contains 409 components and 0.26428 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1001+1015_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.844 x 12.3 at -18.45 degrees (North through East)
! Clean map  min=-0.0014284  max=0.12967 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1001+1015_S_map.fits
wmodel /image_prod/ug002_uva//J1001+1015_S_map.mod
! Writing 409 model components to file: /image_prod/ug002_uva//J1001+1015_S_map.mod
wobs   /image_prod/ug002_uva//J1001+1015_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1001+1015_S_uvs.fits
wwins  /image_prod/ug002_uva//J1001+1015_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1001+1015_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.129674 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000171263 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.396217 0.396217 0.792434 1.58487 3.16973 6.33947 12.6789 25.3579 50.7157
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.129 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  757.161 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1001+1015_S_dfm.log closed on Wed Mar  4 23:21:33 2020