! Started logfile: /image_prod/ug002_uva//J0959-0828_X_dfm.log on Wed Mar  4 23:20:53 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0959-0828_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0959-0828_X_uva.fits
! AN table 1: 79 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.74993 visibilities/baseline/integration-bin.
! Found source: J0959-0828
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31992 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0959-0828_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 192 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008001Jy  sigma=8.624502
! Fit after  self-cal, rms=0.897719Jy  sigma=7.673262
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6724 mas, bmaj=1.721 mas, bpa=-2.535 degrees
! Estimated noise=0.91421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0767478 Jy
! Component: 100  -  total flux cleaned = 0.0959984 Jy
! Total flux subtracted in 100 components = 0.0959984 Jy
! Clean residual min=-0.004223 max=0.010171 Jy/beam
! Clean residual mean=0.000010 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.0959984 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0959984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066261Jy  sigma=0.535407
! Fit after  self-cal, rms=0.066095Jy  sigma=0.533621
! Inverting map 
! Added new window around map position (-0.8, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111974 Jy
! Component: 100  -  total flux cleaned = 0.0187238 Jy
! Total flux subtracted in 100 components = 0.0187238 Jy
! Clean residual min=-0.003596 max=0.008135 Jy/beam
! Clean residual mean=0.000007 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.114722 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.114722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063088Jy  sigma=0.503734
! Fit after  self-cal, rms=0.062998Jy  sigma=0.502923
! Inverting map 
! Added new window around map position (-1.2, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00777972 Jy
! Component: 100  -  total flux cleaned = 0.0130891 Jy
! Total flux subtracted in 100 components = 0.0130891 Jy
! Clean residual min=-0.003278 max=0.004503 Jy/beam
! Clean residual mean=0.000006 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.127811 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.127811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061525Jy  sigma=0.488713
! Fit after  self-cal, rms=0.061471Jy  sigma=0.488279
! Inverting map 
! Added new window around map position (-2.4, -3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00486642 Jy
! Component: 100  -  total flux cleaned = 0.00860574 Jy
! Total flux subtracted in 100 components = 0.00860574 Jy
! Clean residual min=-0.002818 max=0.003855 Jy/beam
! Clean residual mean=0.000005 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.136417 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.136417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060802Jy  sigma=0.481823
! Fit after  self-cal, rms=0.060779Jy  sigma=0.481577
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8585 mas, bmaj=2.05 mas, bpa=-1.947 degrees
! Estimated noise=0.470841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555682 Jy
! Component: 100  -  total flux cleaned = 0.0095173 Jy
! Component: 150  -  total flux cleaned = 0.0124935 Jy
! Component: 200  -  total flux cleaned = 0.0148071 Jy
! Total flux subtracted in 200 components = 0.0148071 Jy
! Clean residual min=-0.002265 max=0.003113 Jy/beam
! Clean residual mean=0.000005 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.151224 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 66 components and 0.151224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060133Jy  sigma=0.475288
! Fit after  self-cal, rms=0.060106Jy  sigma=0.474960
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8585 x 2.05 at -1.947 degrees (North through East)
! Clean map  min=-0.0021059  max=0.10161 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.04     KP        1.03     
!   LA        1.00     MK        1.00     NL        1.09     OV        1.01     
!   PT        0.88     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.98     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.10     OV        0.99     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        0.99     KP        1.02     
!   LA        0.95     MK        0.99     NL        1.10     OV        1.00     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.03     KP        1.03     
!   LA        1.00     MK        1.00     NL        1.03     OV        1.02     
!   PT        0.90     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        0.92     KP        1.03     
!   LA        0.95     MK        1.02     NL        1.10     OV        0.99     
!   PT        0.89     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.96     KP        1.02     
!   LA        0.96     MK        0.98     NL        1.11     OV        1.03     
!   PT        0.89     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.98     KP        1.03     
!   LA        0.95     MK        1.06     NL        1.12     OV        0.97     
!   PT        0.87     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.99     KP        1.07     
!   LA        0.96     MK        0.97     NL        1.09     OV        1.02     
!   PT        0.89     SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        1.01     
!   LA        0.96     MK        1.00     NL        1.09     OV        0.99     
!   PT        0.89     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.01     KP        1.04     
!   LA        0.95     MK        1.06     NL        1.09     OV        1.03     
!   PT        0.90     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.94     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.97     HN        1.05     KP        1.02     
!   LA        0.96     MK        1.01     NL        1.05     OV        1.02     
!   PT        0.89     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.060106Jy  sigma=0.474960
! Fit after  self-cal, rms=0.058405Jy  sigma=0.469907
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8626 mas, bmaj=2.053 mas, bpa=-1.65 degrees
! Estimated noise=0.465251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124003 Jy
! Component: 100  -  total flux cleaned = 0.00160478 Jy
! Component: 150  -  total flux cleaned = 0.00163958 Jy
! Component: 200  -  total flux cleaned = 0.00176418 Jy
! Total flux subtracted in 200 components = 0.00176418 Jy
! Clean residual min=-0.001342 max=0.001418 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.152988 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.152988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058346Jy  sigma=0.469392
! Fit after  self-cal, rms=0.058348Jy  sigma=0.469302
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058348Jy  sigma=0.469302
! Fit after  self-cal, rms=0.059412Jy  sigma=0.467027
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8654 mas, bmaj=2.072 mas, bpa=-2.06 degrees
! Estimated noise=0.468515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000552964 Jy
! Component: 100  -  total flux cleaned = 0.000671999 Jy
! Component: 150  -  total flux cleaned = 0.000815874 Jy
! Component: 200  -  total flux cleaned = 0.000915306 Jy
! Total flux subtracted in 200 components = 0.000915306 Jy
! Clean residual min=-0.001195 max=0.001014 Jy/beam
! Clean residual mean=-0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.153904 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.153904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059386Jy  sigma=0.466798
! Fit after  self-cal, rms=0.059401Jy  sigma=0.466759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147601 Jy
! Component: 100  -  total flux cleaned = 0.00022819 Jy
! Component: 150  -  total flux cleaned = 0.000296906 Jy
! Component: 200  -  total flux cleaned = 0.000320939 Jy
! Total flux subtracted in 200 components = 0.000320939 Jy
! Clean residual min=-0.001172 max=0.001009 Jy/beam
! Clean residual mean=-0.000001 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.154225 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 106 components and 0.154225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059393Jy  sigma=0.466700
! Fit after  self-cal, rms=0.059392Jy  sigma=0.466696
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059392Jy  sigma=0.466696
! Fit after  self-cal, rms=0.059654Jy  sigma=0.466195
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8672 mas, bmaj=2.068 mas, bpa=-2.026 degrees
! Estimated noise=0.467687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.21378e-06 Jy
! Component: 100  -  total flux cleaned = 1.53624e-05 Jy
! Component: 150  -  total flux cleaned = 5.20999e-05 Jy
! Component: 200  -  total flux cleaned = 5.21242e-05 Jy
! Total flux subtracted in 200 components = 5.21242e-05 Jy
! Clean residual min=-0.001045 max=0.000954 Jy/beam
! Clean residual mean=0.000000 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.154277 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.154277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059638Jy  sigma=0.466063
! Fit after  self-cal, rms=0.059646Jy  sigma=0.466049
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.19148e-06 Jy
! Component: 100  -  total flux cleaned = 1.87768e-05 Jy
! Component: 150  -  total flux cleaned = 6.41469e-05 Jy
! Component: 200  -  total flux cleaned = 7.43862e-05 Jy
! Total flux subtracted in 200 components = 7.43862e-05 Jy
! Clean residual min=-0.001032 max=0.000961 Jy/beam
! Clean residual mean=-0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.154351 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 126 components and 0.154351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059641Jy  sigma=0.466006
! Fit after  self-cal, rms=0.059640Jy  sigma=0.466005
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059640Jy  sigma=0.466005
! Fit after  self-cal, rms=0.059767Jy  sigma=0.465973
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.832 mas, bpa=5.931 degrees
! Estimated noise=0.585202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0003733 Jy
! Component: 100  -  total flux cleaned = 0.000362938 Jy
! Component: 150  -  total flux cleaned = 0.000371886 Jy
! Component: 200  -  total flux cleaned = 0.000372123 Jy
! Total flux subtracted in 200 components = 0.000372123 Jy
! Clean residual min=-0.001089 max=0.001083 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.154723 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 138 components and 0.154723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059766Jy  sigma=0.465959
! Fit after  self-cal, rms=0.059768Jy  sigma=0.465952
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.91142e-05 Jy
! Component: 100  -  total flux cleaned = -4.51608e-06 Jy
! Component: 150  -  total flux cleaned = -4.56803e-06 Jy
! Component: 200  -  total flux cleaned = 1.3091e-06 Jy
! Total flux subtracted in 200 components = 1.3091e-06 Jy
! Clean residual min=-0.001087 max=0.001070 Jy/beam
! Clean residual mean=-0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.154725 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 146 components and 0.154725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059768Jy  sigma=0.465951
! Fit after  self-cal, rms=0.059768Jy  sigma=0.465948
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8682 mas, bmaj=2.068 mas, bpa=-2.038 degrees
! Estimated noise=0.467647 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8682 x 2.068 at -2.038 degrees (North through East)
! Clean map  min=-0.00091163  max=0.10015 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6806 mas, bmaj=1.733 mas, bpa=-2.682 degrees
! Estimated noise=0.914936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0765864 Jy
! Component: 100  -  total flux cleaned = 0.0965039 Jy
! Component: 150  -  total flux cleaned = 0.108691 Jy
! Component: 200  -  total flux cleaned = 0.117389 Jy
! Total flux subtracted in 200 components = 0.117389 Jy
! Clean residual min=-0.002661 max=0.004942 Jy/beam
! Clean residual mean=0.000006 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.117389 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.117389 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8682 mas, bmaj=2.068 mas, bpa=-2.038 degrees
! Estimated noise=0.467647 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102401 Jy
! Component: 100  -  total flux cleaned = 0.0171583 Jy
! Component: 150  -  total flux cleaned = 0.0221316 Jy
! Component: 200  -  total flux cleaned = 0.0257725 Jy
! Total flux subtracted in 200 components = 0.0257725 Jy
! Clean residual min=-0.001366 max=0.002132 Jy/beam
! Clean residual mean=0.000003 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.143161 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 62 components and 0.143161 Jy
! Inverting map 
! Added new window around map position (-0.2, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00271682 Jy
! Component: 100  -  total flux cleaned = 0.00478503 Jy
! Component: 150  -  total flux cleaned = 0.00639031 Jy
! Component: 200  -  total flux cleaned = 0.00764959 Jy
! Total flux subtracted in 200 components = 0.00764959 Jy
! Clean residual min=-0.001112 max=0.000958 Jy/beam
! Clean residual mean=0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.150811 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 112 components and 0.150811 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.832 mas, bpa=5.931 degrees
! Estimated noise=0.585202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159752 Jy
! Component: 100  -  total flux cleaned = 0.00252286 Jy
! Component: 150  -  total flux cleaned = 0.00311951 Jy
! Component: 200  -  total flux cleaned = 0.00353583 Jy
! Total flux subtracted in 200 components = 0.00353583 Jy
! Clean residual min=-0.001091 max=0.001052 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.154347 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030699 Jy
! Component: 100  -  total flux cleaned = 0.000510876 Jy
! Component: 150  -  total flux cleaned = 0.000612743 Jy
! Component: 200  -  total flux cleaned = 0.000690497 Jy
! Total flux subtracted in 200 components = 0.000690497 Jy
! Clean residual min=-0.001058 max=0.001044 Jy/beam
! Clean residual mean=-0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.155037 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 162 components and 0.155037 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8682 mas, bmaj=2.068 mas, bpa=-2.038 degrees
! Estimated noise=0.467647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.17475e-05 Jy
! Component: 100  -  total flux cleaned = 2.90746e-05 Jy
! Component: 150  -  total flux cleaned = 6.48761e-05 Jy
! Component: 200  -  total flux cleaned = 8.59324e-05 Jy
! Total flux subtracted in 200 components = 8.59324e-05 Jy
! Clean residual min=-0.000994 max=0.000921 Jy/beam
! Clean residual mean=-0.000000 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.155123 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 186 components and 0.155123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059759Jy  sigma=0.465885
! Fit after  self-cal, rms=0.059752Jy  sigma=0.465864
wmodel J0959-0828_X_map.mod
! Writing 186 model components to file: J0959-0828_X_map.mod
wobs   J0959-0828_X_uvs.fits
! Writing UV FITS file: J0959-0828_X_uvs.fits
wwins  J0959-0828_X_map.win
! wwins: Wrote 6 windows to J0959-0828_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00031438 Jy
! Component: 100  -  total flux cleaned = -0.000265393 Jy
! Component: 150  -  total flux cleaned = -0.000218837 Jy
! Component: 200  -  total flux cleaned = -0.000159132 Jy
! Component: 250  -  total flux cleaned = -0.000159024 Jy
! Component: 300  -  total flux cleaned = -0.000172739 Jy
! Component: 350  -  total flux cleaned = -0.000145617 Jy
! Component: 400  -  total flux cleaned = -0.000185427 Jy
! Component: 450  -  total flux cleaned = -0.000185308 Jy
! Component: 500  -  total flux cleaned = -0.000185522 Jy
! Component: 550  -  total flux cleaned = -0.000185563 Jy
! Component: 600  -  total flux cleaned = -0.000185574 Jy
! Component: 650  -  total flux cleaned = -0.000161177 Jy
! Component: 700  -  total flux cleaned = -0.000149329 Jy
! Component: 750  -  total flux cleaned = -8.99812e-05 Jy
! Component: 800  -  total flux cleaned = -9.02438e-05 Jy
! Component: 850  -  total flux cleaned = -6.70829e-05 Jy
! Component: 900  -  total flux cleaned = -4.42906e-05 Jy
! Component: 950  -  total flux cleaned = -2.13714e-05 Jy
! Component: 1000  -  total flux cleaned = 1.2381e-05 Jy
! Component: 1050  -  total flux cleaned = 2.35602e-05 Jy
! Component: 1100  -  total flux cleaned = 8.97009e-05 Jy
! Component: 1150  -  total flux cleaned = 5.69557e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000100026 Jy
! Component: 1250  -  total flux cleaned = 8.93612e-05 Jy
! Component: 1300  -  total flux cleaned = 8.92741e-05 Jy
! Component: 1350  -  total flux cleaned = 8.92147e-05 Jy
! Component: 1400  -  total flux cleaned = 0.00013086 Jy
! Component: 1450  -  total flux cleaned = 0.000110165 Jy
! Component: 1500  -  total flux cleaned = 0.000140926 Jy
! Component: 1550  -  total flux cleaned = 0.000100171 Jy
! Component: 1600  -  total flux cleaned = 0.000140516 Jy
! Component: 1650  -  total flux cleaned = 7.02881e-05 Jy
! Component: 1700  -  total flux cleaned = 9.02879e-05 Jy
! Component: 1750  -  total flux cleaned = 0.000120008 Jy
! Component: 1800  -  total flux cleaned = 7.09087e-05 Jy
! Component: 1850  -  total flux cleaned = 8.07159e-05 Jy
! Component: 1900  -  total flux cleaned = 6.13898e-05 Jy
! Component: 1950  -  total flux cleaned = 3.25966e-05 Jy
! Component: 2000  -  total flux cleaned = 5.1673e-05 Jy
! Component: 2050  -  total flux cleaned = 3.27045e-05 Jy
! Component: 2100  -  total flux cleaned = 6.09617e-05 Jy
! Component: 2150  -  total flux cleaned = 4.22134e-05 Jy
! Component: 2200  -  total flux cleaned = 4.21022e-05 Jy
! Component: 2250  -  total flux cleaned = 4.21806e-05 Jy
! Component: 2300  -  total flux cleaned = 2.38621e-05 Jy
! Component: 2350  -  total flux cleaned = 5.12876e-05 Jy
! Component: 2400  -  total flux cleaned = 6.03382e-05 Jy
! Component: 2450  -  total flux cleaned = 6.043e-05 Jy
! Component: 2500  -  total flux cleaned = 5.14515e-05 Jy
! Component: 2550  -  total flux cleaned = 6.94912e-06 Jy
! Component: 2600  -  total flux cleaned = 5.13841e-05 Jy
! Component: 2650  -  total flux cleaned = 5.14363e-05 Jy
! Component: 2700  -  total flux cleaned = 3.38804e-05 Jy
! Component: 2750  -  total flux cleaned = 4.26346e-05 Jy
! Component: 2800  -  total flux cleaned = -3.54955e-05 Jy
! Component: 2850  -  total flux cleaned = -9.1319e-07 Jy
! Component: 2900  -  total flux cleaned = -3.52532e-05 Jy
! Component: 2950  -  total flux cleaned = -2.67764e-05 Jy
! Component: 3000  -  total flux cleaned = -2.68254e-05 Jy
! Component: 3050  -  total flux cleaned = -6.91861e-05 Jy
! Component: 3100  -  total flux cleaned = -9.44149e-05 Jy
! Component: 3150  -  total flux cleaned = -8.60725e-05 Jy
! Component: 3200  -  total flux cleaned = -0.000119351 Jy
! Component: 3250  -  total flux cleaned = -0.000135947 Jy
! Component: 3300  -  total flux cleaned = -0.000210129 Jy
! Component: 3350  -  total flux cleaned = -0.000193776 Jy
! Component: 3400  -  total flux cleaned = -0.000169307 Jy
! Component: 3450  -  total flux cleaned = -0.00023424 Jy
! Component: 3500  -  total flux cleaned = -0.000234264 Jy
! Component: 3550  -  total flux cleaned = -0.000282509 Jy
! Component: 3600  -  total flux cleaned = -0.000306444 Jy
! Component: 3650  -  total flux cleaned = -0.000346274 Jy
! Component: 3700  -  total flux cleaned = -0.000362147 Jy
! Component: 3750  -  total flux cleaned = -0.0003463 Jy
! Component: 3800  -  total flux cleaned = -0.000377733 Jy
! Component: 3850  -  total flux cleaned = -0.000385613 Jy
! Component: 3900  -  total flux cleaned = -0.000432357 Jy
! Component: 3950  -  total flux cleaned = -0.000486606 Jy
! Component: 4000  -  total flux cleaned = -0.000486662 Jy
! Component: 4050  -  total flux cleaned = -0.000502062 Jy
! Total flux subtracted in 4096 components = -0.000532626 Jy
! Clean residual min=-0.000530 max=0.000488 Jy/beam
! Clean residual mean=0.000000 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.15459 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 513 components and 0.15459 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0959-0828_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8682 x 2.068 at -2.038 degrees (North through East)
! Clean map  min=-0.0008313  max=0.10012 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0959-0828_X_map.fits
wmodel /image_prod/ug002_uva//J0959-0828_X_map.mod
! Writing 513 model components to file: /image_prod/ug002_uva//J0959-0828_X_map.mod
wobs   /image_prod/ug002_uva//J0959-0828_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0959-0828_X_uvs.fits
wwins  /image_prod/ug002_uva//J0959-0828_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0959-0828_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.100118 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000134145 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.40196 0.40196 0.80392 1.60784 3.21568 6.43136 12.8627 25.7254 51.4509
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.1 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  746.343 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0959-0828_X_dfm.log closed on Wed Mar  4 23:20:59 2020