! Started logfile: /image_prod/ug002_uva//J0958+6533_X_e_dfm.log on Wed Mar 4 23:19:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0958+6533_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0958+6533_X_e_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.84321 visibilities/baseline/integration-bin. ! Found source: J0958+6533 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16392 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0958+6533_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.152853Jy sigma=8.093462 ! Fit after self-cal, rms=0.490983Jy sigma=3.527677 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7578 mas, bmaj=0.9709 mas, bpa=-48.86 degrees ! Estimated noise=1.13955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.386485 Jy ! Component: 100 - total flux cleaned = 0.521028 Jy ! Total flux subtracted in 100 components = 0.521028 Jy ! Clean residual min=-0.016406 max=0.056497 Jy/beam ! Clean residual mean=0.000018 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 0.521028 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.521028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151466Jy sigma=1.029187 ! Fit after self-cal, rms=0.151080Jy sigma=1.026987 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598623 Jy ! Component: 100 - total flux cleaned = 0.0869362 Jy ! Total flux subtracted in 100 components = 0.0869362 Jy ! Clean residual min=-0.013827 max=0.029196 Jy/beam ! Clean residual mean=0.000010 rms=0.002701 Jy/beam ! Combined flux in latest and established models = 0.607964 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.607964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120135Jy sigma=0.809753 ! Fit after self-cal, rms=0.119947Jy sigma=0.808670 ! Inverting map ! Added new window around map position (-1.4, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025283 Jy ! Component: 100 - total flux cleaned = 0.0373016 Jy ! Total flux subtracted in 100 components = 0.0373016 Jy ! Clean residual min=-0.013644 max=0.025627 Jy/beam ! Clean residual mean=0.000006 rms=0.002519 Jy/beam ! Combined flux in latest and established models = 0.645266 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.645266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112523Jy sigma=0.758439 ! Fit after self-cal, rms=0.111598Jy sigma=0.751515 ! Inverting map ! Added new window around map position (1.4, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195875 Jy ! Component: 100 - total flux cleaned = 0.030086 Jy ! Total flux subtracted in 100 components = 0.030086 Jy ! Clean residual min=-0.015030 max=0.015236 Jy/beam ! Clean residual mean=0.000003 rms=0.002370 Jy/beam ! Combined flux in latest and established models = 0.675352 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.675352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106581Jy sigma=0.716936 ! Fit after self-cal, rms=0.106427Jy sigma=0.715857 ! Inverting map ! Added new window around map position (-0.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142225 Jy ! Component: 100 - total flux cleaned = 0.0190496 Jy ! Total flux subtracted in 100 components = 0.0190496 Jy ! Clean residual min=-0.014436 max=0.012868 Jy/beam ! Clean residual mean=0.000001 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.694401 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.694401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104305Jy sigma=0.700514 ! Fit after self-cal, rms=0.104156Jy sigma=0.699473 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9682 mas, bmaj=1.213 mas, bpa=-47.47 degrees ! Estimated noise=0.798138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018984 Jy ! Component: 100 - total flux cleaned = 0.0315849 Jy ! Component: 150 - total flux cleaned = 0.0400015 Jy ! Component: 200 - total flux cleaned = 0.0449783 Jy ! Total flux subtracted in 200 components = 0.0449783 Jy ! Clean residual min=-0.010360 max=0.011391 Jy/beam ! Clean residual mean=-0.000004 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 0.73938 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 53 components and 0.73938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099513Jy sigma=0.668555 ! Fit after self-cal, rms=0.099225Jy sigma=0.666336 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9682 x 1.213 at -47.47 degrees (North through East) ! Clean map min=-0.0095751 max=0.50185 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.95 KP 1.06 ! LA 0.97 MK 1.06 NL 1.21 OV 0.99 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.98 HN 0.97 KP 1.06 ! LA 0.96 MK 1.09 NL 1.20 OV 0.98 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.97 KP 1.06 ! LA 0.99 MK 1.01 NL 1.20 OV 0.99 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.94 KP 1.05 ! LA 0.98 MK 1.06 NL 1.21 OV 0.99 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.98 KP 1.05 ! LA 0.98 MK 1.06 NL 1.21 OV 1.00 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.97 KP 1.07 ! LA 0.97 MK 1.07 NL 1.21 OV 0.99 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.99 KP 1.06 ! LA 0.98 MK 1.08 NL 1.22 OV 0.99 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.99 KP 1.06 ! LA 0.99 MK 1.09 NL 1.21 OV 0.98 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.99 KP 1.07 ! LA 0.98 MK 1.06 NL 1.21 OV 1.00 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 1.01 KP 1.05 ! LA 0.99 MK 1.07 NL 1.23 OV 1.00 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.01 KP 1.06 ! LA 1.00 MK 1.09 NL 1.22 OV 1.02 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.02 KP 1.07 ! LA 0.99 MK 1.10 NL 1.22 OV 1.02 ! PT 0.90 SC 0.99 ! ! ! Fit before self-cal, rms=0.099225Jy sigma=0.666336 ! Fit after self-cal, rms=0.080693Jy sigma=0.537397 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9826 mas, bmaj=1.217 mas, bpa=-46.89 degrees ! Estimated noise=0.80658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0133134 Jy ! Component: 100 - total flux cleaned = -0.018918 Jy ! Component: 150 - total flux cleaned = -0.0207444 Jy ! Component: 200 - total flux cleaned = -0.0219235 Jy ! Total flux subtracted in 200 components = -0.0219235 Jy ! Clean residual min=-0.006860 max=0.007456 Jy/beam ! Clean residual mean=-0.000004 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.717456 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.717456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078130Jy sigma=0.519722 ! Fit after self-cal, rms=0.078095Jy sigma=0.519061 ! Inverting map ! Added new window around map position (-49.4, 15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475577 Jy ! Component: 100 - total flux cleaned = 0.00477196 Jy ! Component: 150 - total flux cleaned = 0.00444921 Jy ! Component: 200 - total flux cleaned = 0.0044479 Jy ! Total flux subtracted in 200 components = 0.0044479 Jy ! Clean residual min=-0.006483 max=0.006995 Jy/beam ! Clean residual mean=-0.000005 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.721904 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 92 components and 0.721904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077173Jy sigma=0.512729 ! Fit after self-cal, rms=0.077120Jy sigma=0.512312 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077120Jy sigma=0.512312 ! Fit after self-cal, rms=0.068851Jy sigma=0.443374 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9846 mas, bmaj=1.203 mas, bpa=-46.93 degrees ! Estimated noise=0.80535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00559316 Jy ! Component: 100 - total flux cleaned = -0.00758051 Jy ! Component: 150 - total flux cleaned = -0.00885113 Jy ! Component: 200 - total flux cleaned = -0.00963659 Jy ! Total flux subtracted in 200 components = -0.00963659 Jy ! Clean residual min=-0.003821 max=0.003249 Jy/beam ! Clean residual mean=-0.000006 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.712268 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.712268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067801Jy sigma=0.434862 ! Fit after self-cal, rms=0.067810Jy sigma=0.434515 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000885077 Jy ! Component: 100 - total flux cleaned = -0.00154594 Jy ! Component: 150 - total flux cleaned = -0.00184152 Jy ! Component: 200 - total flux cleaned = -0.00212025 Jy ! Total flux subtracted in 200 components = -0.00212025 Jy ! Clean residual min=-0.003693 max=0.003121 Jy/beam ! Clean residual mean=-0.000005 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.710147 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.710147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067518Jy sigma=0.432209 ! Fit after self-cal, rms=0.067497Jy sigma=0.432067 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067497Jy sigma=0.432067 ! Fit after self-cal, rms=0.067163Jy sigma=0.427124 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9833 mas, bmaj=1.201 mas, bpa=-46.85 degrees ! Estimated noise=0.804182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00352528 Jy ! Component: 100 - total flux cleaned = -0.00475793 Jy ! Component: 150 - total flux cleaned = -0.00534436 Jy ! Component: 200 - total flux cleaned = -0.00586659 Jy ! Total flux subtracted in 200 components = -0.00586659 Jy ! Clean residual min=-0.003119 max=0.002800 Jy/beam ! Clean residual mean=-0.000005 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.704281 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.704281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066732Jy sigma=0.423620 ! Fit after self-cal, rms=0.066725Jy sigma=0.423530 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000453186 Jy ! Component: 100 - total flux cleaned = -0.000610732 Jy ! Component: 150 - total flux cleaned = -0.000686182 Jy ! Component: 200 - total flux cleaned = -0.000893992 Jy ! Total flux subtracted in 200 components = -0.000893992 Jy ! Clean residual min=-0.003045 max=0.002738 Jy/beam ! Clean residual mean=-0.000005 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.703387 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 127 components and 0.703387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066568Jy sigma=0.422325 ! Fit after self-cal, rms=0.066554Jy sigma=0.422246 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066554Jy sigma=0.422246 ! Fit after self-cal, rms=0.066576Jy sigma=0.421359 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=2.547 mas, bpa=-86.86 degrees ! Estimated noise=1.08441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00359276 Jy ! Component: 100 - total flux cleaned = -0.00507251 Jy ! Component: 150 - total flux cleaned = -0.00570651 Jy ! Component: 200 - total flux cleaned = -0.00629237 Jy ! Total flux subtracted in 200 components = -0.00629237 Jy ! Clean residual min=-0.003166 max=0.003613 Jy/beam ! Clean residual mean=-0.000010 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.697094 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 0.697094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066508Jy sigma=0.420767 ! Fit after self-cal, rms=0.066499Jy sigma=0.420638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.2, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373534 Jy ! Component: 100 - total flux cleaned = 0.00616929 Jy ! Component: 150 - total flux cleaned = 0.00686759 Jy ! Component: 200 - total flux cleaned = 0.00726569 Jy ! Total flux subtracted in 200 components = 0.00726569 Jy ! Clean residual min=-0.002720 max=0.002499 Jy/beam ! Clean residual mean=-0.000005 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.70436 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 185 components and 0.70436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066366Jy sigma=0.419756 ! Fit after self-cal, rms=0.066360Jy sigma=0.419689 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9824 mas, bmaj=1.199 mas, bpa=-46.75 degrees ! Estimated noise=0.803199 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9824 x 1.199 at -46.75 degrees (North through East) ! Clean map min=-0.0039295 max=0.50871 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066360Jy sigma=0.419689 ! Fit after self-cal, rms=0.063233Jy sigma=0.392957 ! Inverting map and beam ! Estimated beam: bmin=0.9828 mas, bmaj=1.198 mas, bpa=-46.95 degrees ! Estimated noise=0.802732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168357 Jy ! Component: 100 - total flux cleaned = -0.000975578 Jy ! Component: 150 - total flux cleaned = -0.00034227 Jy ! Component: 200 - total flux cleaned = 1.96187e-05 Jy ! Total flux subtracted in 200 components = 1.96187e-05 Jy ! Clean residual min=-0.002696 max=0.002504 Jy/beam ! Clean residual mean=-0.000002 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.70438 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 204 components and 0.704379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063009Jy sigma=0.391139 ! Fit after self-cal, rms=0.063005Jy sigma=0.391111 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356 Jy ! Component: 100 - total flux cleaned = 0.000626267 Jy ! Component: 150 - total flux cleaned = 0.000821045 Jy ! Component: 200 - total flux cleaned = 0.000946194 Jy ! Total flux subtracted in 200 components = 0.000946194 Jy ! Clean residual min=-0.002591 max=0.002380 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.705326 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 218 components and 0.705326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062881Jy sigma=0.390185 ! Fit after self-cal, rms=0.062877Jy sigma=0.390159 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062877Jy sigma=0.390159 ! Fit after self-cal, rms=0.062856Jy sigma=0.389878 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7701 mas, bmaj=0.9563 mas, bpa=-48.39 degrees ! Estimated noise=1.1506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.391161 Jy ! Component: 100 - total flux cleaned = 0.528045 Jy ! Component: 150 - total flux cleaned = 0.587261 Jy ! Component: 200 - total flux cleaned = 0.614582 Jy ! Total flux subtracted in 200 components = 0.614582 Jy ! Clean residual min=-0.005366 max=0.013116 Jy/beam ! Clean residual mean=0.000004 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.614582 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.614582 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9822 mas, bmaj=1.197 mas, bpa=-46.92 degrees ! Estimated noise=0.801554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219676 Jy ! Component: 100 - total flux cleaned = 0.0355837 Jy ! Component: 150 - total flux cleaned = 0.0455357 Jy ! Component: 200 - total flux cleaned = 0.0531485 Jy ! Total flux subtracted in 200 components = 0.0531485 Jy ! Clean residual min=-0.002913 max=0.005509 Jy/beam ! Clean residual mean=-0.000000 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.667731 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 38 components and 0.66773 Jy ! Inverting map ! Added new window around map position (1.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620067 Jy ! Component: 100 - total flux cleaned = 0.0104802 Jy ! Component: 150 - total flux cleaned = 0.0132772 Jy ! Component: 200 - total flux cleaned = 0.0158889 Jy ! Total flux subtracted in 200 components = 0.0158889 Jy ! Clean residual min=-0.002625 max=0.003585 Jy/beam ! Clean residual mean=-0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.683619 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 58 components and 0.683619 Jy ! Inverting map ! Added new window around map position (-2.2, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295907 Jy ! Component: 100 - total flux cleaned = 0.00452437 Jy ! Component: 150 - total flux cleaned = 0.00607743 Jy ! Component: 200 - total flux cleaned = 0.00740688 Jy ! Total flux subtracted in 200 components = 0.00740688 Jy ! Clean residual min=-0.002347 max=0.002487 Jy/beam ! Clean residual mean=-0.000002 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.691026 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 76 components and 0.691027 Jy ! Inverting map ! Added new window around map position (-2.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190811 Jy ! Component: 100 - total flux cleaned = 0.00290575 Jy ! Component: 150 - total flux cleaned = 0.00375846 Jy ! Component: 200 - total flux cleaned = 0.00456547 Jy ! Total flux subtracted in 200 components = 0.00456547 Jy ! Clean residual min=-0.002211 max=0.002138 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.695592 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 91 components and 0.695592 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=2.549 mas, bpa=-87.58 degrees ! Estimated noise=1.08307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248633 Jy ! Component: 100 - total flux cleaned = 0.00359968 Jy ! Component: 150 - total flux cleaned = 0.00408802 Jy ! Component: 200 - total flux cleaned = 0.00446443 Jy ! Total flux subtracted in 200 components = 0.00446443 Jy ! Clean residual min=-0.002439 max=0.002147 Jy/beam ! Clean residual mean=-0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.700057 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288389 Jy ! Component: 100 - total flux cleaned = 0.000636313 Jy ! Component: 150 - total flux cleaned = 0.00087288 Jy ! Component: 200 - total flux cleaned = 0.00109036 Jy ! Total flux subtracted in 200 components = 0.00109036 Jy ! Clean residual min=-0.002364 max=0.002085 Jy/beam ! Clean residual mean=-0.000003 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.701147 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 152 components and 0.701147 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9822 mas, bmaj=1.197 mas, bpa=-46.92 degrees ! Estimated noise=0.801554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.90711e-05 Jy ! Component: 100 - total flux cleaned = 5.88555e-05 Jy ! Component: 150 - total flux cleaned = 5.73379e-05 Jy ! Component: 200 - total flux cleaned = 5.52429e-05 Jy ! Total flux subtracted in 200 components = 5.52429e-05 Jy ! Clean residual min=-0.002100 max=0.001988 Jy/beam ! Clean residual mean=-0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.701202 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 168 components and 0.701202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062784Jy sigma=0.389613 ! Fit after self-cal, rms=0.062664Jy sigma=0.388801 wmodel J0958+6533_X_e_map.mod ! Writing 168 model components to file: J0958+6533_X_e_map.mod wobs J0958+6533_X_e_uvs.fits ! Writing UV FITS file: J0958+6533_X_e_uvs.fits wwins J0958+6533_X_e_map.win ! wwins: Wrote 10 windows to J0958+6533_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000683105 Jy ! Component: 100 - total flux cleaned = -0.00071863 Jy ! Component: 150 - total flux cleaned = -0.00082138 Jy ! Component: 200 - total flux cleaned = -0.000854113 Jy ! Component: 250 - total flux cleaned = -0.000982125 Jy ! Component: 300 - total flux cleaned = -0.000981615 Jy ! Component: 350 - total flux cleaned = -0.000951675 Jy ! Component: 400 - total flux cleaned = -0.001103 Jy ! Component: 450 - total flux cleaned = -0.00122213 Jy ! Component: 500 - total flux cleaned = -0.00119246 Jy ! Component: 550 - total flux cleaned = -0.00122123 Jy ! Component: 600 - total flux cleaned = -0.00124949 Jy ! Component: 650 - total flux cleaned = -0.0012492 Jy ! Component: 700 - total flux cleaned = -0.0011933 Jy ! Component: 750 - total flux cleaned = -0.00124872 Jy ! Component: 800 - total flux cleaned = -0.00116674 Jy ! Component: 850 - total flux cleaned = -0.00119395 Jy ! Component: 900 - total flux cleaned = -0.00119374 Jy ! Component: 950 - total flux cleaned = -0.00116716 Jy ! Component: 1000 - total flux cleaned = -0.00121969 Jy ! Component: 1050 - total flux cleaned = -0.00119337 Jy ! Component: 1100 - total flux cleaned = -0.00116726 Jy ! Component: 1150 - total flux cleaned = -0.00111615 Jy ! Component: 1200 - total flux cleaned = -0.00124281 Jy ! Component: 1250 - total flux cleaned = -0.00114203 Jy ! Component: 1300 - total flux cleaned = -0.00126725 Jy ! Component: 1350 - total flux cleaned = -0.00121755 Jy ! Component: 1400 - total flux cleaned = -0.00126685 Jy ! Component: 1450 - total flux cleaned = -0.001316 Jy ! Component: 1500 - total flux cleaned = -0.00131578 Jy ! Component: 1550 - total flux cleaned = -0.00136395 Jy ! Component: 1600 - total flux cleaned = -0.00136409 Jy ! Component: 1650 - total flux cleaned = -0.00138789 Jy ! Component: 1700 - total flux cleaned = -0.00138804 Jy ! Component: 1750 - total flux cleaned = -0.00148229 Jy ! Component: 1800 - total flux cleaned = -0.00148225 Jy ! Component: 1850 - total flux cleaned = -0.00155161 Jy ! Component: 1900 - total flux cleaned = -0.00150534 Jy ! Component: 1950 - total flux cleaned = -0.0015053 Jy ! Component: 2000 - total flux cleaned = -0.00157375 Jy ! Component: 2050 - total flux cleaned = -0.00164152 Jy ! Component: 2100 - total flux cleaned = -0.00148406 Jy ! Component: 2150 - total flux cleaned = -0.00159598 Jy ! Component: 2200 - total flux cleaned = -0.00161813 Jy ! Component: 2250 - total flux cleaned = -0.00159607 Jy ! Component: 2300 - total flux cleaned = -0.0015961 Jy ! Component: 2350 - total flux cleaned = -0.00168369 Jy ! Component: 2400 - total flux cleaned = -0.00159675 Jy ! Component: 2450 - total flux cleaned = -0.00168345 Jy ! Component: 2500 - total flux cleaned = -0.00172649 Jy ! Component: 2550 - total flux cleaned = -0.00164079 Jy ! Component: 2600 - total flux cleaned = -0.00166231 Jy ! Component: 2650 - total flux cleaned = -0.0017473 Jy ! Component: 2700 - total flux cleaned = -0.00178967 Jy ! Component: 2750 - total flux cleaned = -0.00181068 Jy ! Component: 2800 - total flux cleaned = -0.00181059 Jy ! Component: 2850 - total flux cleaned = -0.00185226 Jy ! Component: 2900 - total flux cleaned = -0.0018314 Jy ! Component: 2950 - total flux cleaned = -0.00181084 Jy ! Component: 3000 - total flux cleaned = -0.00189297 Jy ! Component: 3050 - total flux cleaned = -0.00185225 Jy ! Component: 3100 - total flux cleaned = -0.00195394 Jy ! Component: 3150 - total flux cleaned = -0.00191333 Jy ! Component: 3200 - total flux cleaned = -0.00185284 Jy ! Component: 3250 - total flux cleaned = -0.00189308 Jy ! Component: 3300 - total flux cleaned = -0.00189306 Jy ! Component: 3350 - total flux cleaned = -0.00189315 Jy ! Component: 3400 - total flux cleaned = -0.00193296 Jy ! Component: 3450 - total flux cleaned = -0.00183437 Jy ! Component: 3500 - total flux cleaned = -0.00183437 Jy ! Component: 3550 - total flux cleaned = -0.00181476 Jy ! Component: 3600 - total flux cleaned = -0.00187335 Jy ! Component: 3650 - total flux cleaned = -0.00185389 Jy ! Component: 3700 - total flux cleaned = -0.00191185 Jy ! Component: 3750 - total flux cleaned = -0.00185413 Jy ! Component: 3800 - total flux cleaned = -0.00193089 Jy ! Component: 3850 - total flux cleaned = -0.00191184 Jy ! Component: 3900 - total flux cleaned = -0.00187377 Jy ! Component: 3950 - total flux cleaned = -0.00185484 Jy ! Component: 4000 - total flux cleaned = -0.00193024 Jy ! Component: 4050 - total flux cleaned = -0.00189257 Jy ! Total flux subtracted in 4096 components = -0.00189268 Jy ! Clean residual min=-0.001218 max=0.001000 Jy/beam ! Clean residual mean=-0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.69931 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 509 components and 0.69931 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0958+6533_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9822 x 1.197 at -46.92 degrees (North through East) ! Clean map min=-0.0019504 max=0.51358 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0958+6533_X_e_map.fits wmodel /image_prod/ug002_uva//J0958+6533_X_e_map.mod ! Writing 509 model components to file: /image_prod/ug002_uva//J0958+6533_X_e_map.mod wobs /image_prod/ug002_uva//J0958+6533_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0958+6533_X_e_uvs.fits wwins /image_prod/ug002_uva//J0958+6533_X_e_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0958+6533_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.513576 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031321 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.182958 0.182958 0.365917 0.731833 1.46367 2.92733 5.85467 11.7093 23.4187 46.8373 93.6747 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.513 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1639.72 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0958+6533_X_e_dfm.log closed on Wed Mar 4 23:19:30 2020