! Started logfile: /image_prod/ug002_uva//J0958+6533_S_h_dfm.log on Wed Mar  4 23:18:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0958+6533_S_h_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0958+6533_S_h_uva.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.88642 visibilities/baseline/integration-bin.
! Found source: J0958+6533
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2154 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0958+6533_S_h]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.109569Jy  sigma=7.335499
! Fit after  self-cal, rms=0.509185Jy  sigma=3.297147
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.249 mas, bmaj=3.964 mas, bpa=-1.775 degrees
! Estimated noise=2.79075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.397316 Jy
! Component: 100  -  total flux cleaned = 0.486634 Jy
! Total flux subtracted in 100 components = 0.486634 Jy
! Clean residual min=-0.022545 max=0.035037 Jy/beam
! Clean residual mean=-0.000069 rms=0.006147 Jy/beam
! Combined flux in latest and established models = 0.486634 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.486634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.172791Jy  sigma=0.926847
! Fit after  self-cal, rms=0.172754Jy  sigma=0.926772
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.778 mas, bmaj=4.634 mas, bpa=7.904 degrees
! Estimated noise=2.364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0439433 Jy
! Component: 100  -  total flux cleaned = 0.0677054 Jy
! Component: 150  -  total flux cleaned = 0.0813833 Jy
! Component: 200  -  total flux cleaned = 0.0846372 Jy
! Total flux subtracted in 200 components = 0.0846372 Jy
! Clean residual min=-0.020065 max=0.023584 Jy/beam
! Clean residual mean=-0.000069 rms=0.004723 Jy/beam
! Combined flux in latest and established models = 0.571272 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 34 components and 0.571272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.160989Jy  sigma=0.832932
! Fit after  self-cal, rms=0.160715Jy  sigma=0.831512
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.778 x 4.634 at 7.904 degrees (North through East)
! Clean map  min=-0.019178  max=0.51116 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.03     NL        0.96     OV        0.88     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.98     HN        0.97     KP        0.97     
!   LA        0.97     MK        0.99     NL        0.91     OV        2.55     
!   PT        0.98     SC        1.37     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.97     OV        0.90     
!   PT        1.01     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.160715Jy  sigma=0.831512
! Fit after  self-cal, rms=0.172430Jy  sigma=0.692628
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.833 mas, bmaj=4.684 mas, bpa=6.565 degrees
! Estimated noise=2.37897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.5, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00920414 Jy
! Component: 100  -  total flux cleaned = 0.0086387 Jy
! Component: 150  -  total flux cleaned = 0.0082216 Jy
! Component: 200  -  total flux cleaned = 0.00791261 Jy
! Total flux subtracted in 200 components = 0.00791261 Jy
! Clean residual min=-0.017298 max=0.015431 Jy/beam
! Clean residual mean=-0.000039 rms=0.003902 Jy/beam
! Combined flux in latest and established models = 0.579184 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 50 components and 0.579184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.168219Jy  sigma=0.665835
! Fit after  self-cal, rms=0.168077Jy  sigma=0.661710
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.168077Jy  sigma=0.661710
! Fit after  self-cal, rms=0.154194Jy  sigma=0.448379
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.803 mas, bmaj=4.68 mas, bpa=7.47 degrees
! Estimated noise=2.36661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499986 Jy
! Component: 100  -  total flux cleaned = 0.00494781 Jy
! Component: 150  -  total flux cleaned = 0.00450846 Jy
! Component: 200  -  total flux cleaned = 0.00450235 Jy
! Total flux subtracted in 200 components = 0.00450235 Jy
! Clean residual min=-0.005087 max=0.008106 Jy/beam
! Clean residual mean=-0.000003 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.583687 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.583686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.153221Jy  sigma=0.436499
! Fit after  self-cal, rms=0.153361Jy  sigma=0.434949
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 48).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055965 Jy
! Component: 100  -  total flux cleaned = 0.00576186 Jy
! Component: 150  -  total flux cleaned = 0.00532523 Jy
! Component: 200  -  total flux cleaned = 0.00469346 Jy
! Total flux subtracted in 200 components = 0.00469346 Jy
! Clean residual min=-0.005256 max=0.005939 Jy/beam
! Clean residual mean=0.000004 rms=0.001223 Jy/beam
! Combined flux in latest and established models = 0.58838 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.58838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.152874Jy  sigma=0.429616
! Fit after  self-cal, rms=0.152884Jy  sigma=0.429356
! Inverting map 
! Added new window around map position (-30.5, -18.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00432338 Jy
! Component: 100  -  total flux cleaned = 0.00445779 Jy
! Component: 150  -  total flux cleaned = 0.00414507 Jy
! Component: 200  -  total flux cleaned = 0.00366889 Jy
! Total flux subtracted in 200 components = 0.00366889 Jy
! Clean residual min=-0.004973 max=0.005505 Jy/beam
! Clean residual mean=0.000005 rms=0.001151 Jy/beam
! Combined flux in latest and established models = 0.592049 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 97 components and 0.592049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.152697Jy  sigma=0.426230
! Fit after  self-cal, rms=0.152724Jy  sigma=0.426068
! Inverting map 
! Added new window around map position (69, -66.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00470974 Jy
! Component: 100  -  total flux cleaned = 0.00528469 Jy
! Component: 150  -  total flux cleaned = 0.00568965 Jy
! Component: 200  -  total flux cleaned = 0.00632186 Jy
! Total flux subtracted in 200 components = 0.00632186 Jy
! Clean residual min=-0.004505 max=0.004578 Jy/beam
! Clean residual mean=-0.000000 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.598371 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 119 components and 0.598371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.152474Jy  sigma=0.423534
! Fit after  self-cal, rms=0.152481Jy  sigma=0.423424
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.152481Jy  sigma=0.423424
! Fit after  self-cal, rms=0.155223Jy  sigma=0.419207
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.794 mas, bmaj=4.685 mas, bpa=8.166 degrees
! Estimated noise=2.36005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000760484 Jy
! Component: 100  -  total flux cleaned = 0.0017313 Jy
! Component: 150  -  total flux cleaned = 0.00192297 Jy
! Component: 200  -  total flux cleaned = 0.00209474 Jy
! Total flux subtracted in 200 components = 0.00209474 Jy
! Clean residual min=-0.003845 max=0.003782 Jy/beam
! Clean residual mean=0.000003 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.600465 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 134 components and 0.600465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.155080Jy  sigma=0.417059
! Fit after  self-cal, rms=0.155093Jy  sigma=0.416923
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612503 Jy
! Component: 100  -  total flux cleaned = 0.000456122 Jy
! Component: 150  -  total flux cleaned = 0.000236941 Jy
! Component: 200  -  total flux cleaned = -3.54948e-05 Jy
! Total flux subtracted in 200 components = -3.54948e-05 Jy
! Clean residual min=-0.003846 max=0.003680 Jy/beam
! Clean residual mean=0.000004 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.60043 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 149 components and 0.60043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.155024Jy  sigma=0.416076
! Fit after  self-cal, rms=0.155034Jy  sigma=0.416021
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.155034Jy  sigma=0.416021
! Fit after  self-cal, rms=0.156034Jy  sigma=0.415566
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.103 mas, bmaj=8.885 mas, bpa=28.02 degrees
! Estimated noise=2.97441 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112828 Jy
! Component: 100  -  total flux cleaned = 0.000339051 Jy
! Component: 150  -  total flux cleaned = -0.000112036 Jy
! Component: 200  -  total flux cleaned = -0.000410467 Jy
! Total flux subtracted in 200 components = -0.000410467 Jy
! Clean residual min=-0.003584 max=0.003932 Jy/beam
! Clean residual mean=0.000011 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.600019 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 165 components and 0.600019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.155994Jy  sigma=0.415113
! Fit after  self-cal, rms=0.156003Jy  sigma=0.415024
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124423 Jy
! Component: 100  -  total flux cleaned = -0.000266295 Jy
! Component: 150  -  total flux cleaned = -0.000541432 Jy
! Component: 200  -  total flux cleaned = -0.000700318 Jy
! Total flux subtracted in 200 components = -0.000700318 Jy
! Clean residual min=-0.003596 max=0.003978 Jy/beam
! Clean residual mean=0.000010 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.599319 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 177 components and 0.599319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.155987Jy  sigma=0.414791
! Fit after  self-cal, rms=0.155995Jy  sigma=0.414764
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.791 mas, bmaj=4.687 mas, bpa=8.524 degrees
! Estimated noise=2.35723 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.791 x 4.687 at 8.524 degrees (North through East)
! Clean map  min=-0.0051509  max=0.50927 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.155995Jy  sigma=0.414764
! Fit after  self-cal, rms=0.160386Jy  sigma=0.386288
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=4.691 mas, bpa=8.686 degrees
! Estimated noise=2.35687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000360767 Jy
! Component: 100  -  total flux cleaned = 8.57633e-05 Jy
! Component: 150  -  total flux cleaned = -4.34165e-05 Jy
! Component: 200  -  total flux cleaned = -0.000165523 Jy
! Total flux subtracted in 200 components = -0.000165523 Jy
! Clean residual min=-0.003626 max=0.003445 Jy/beam
! Clean residual mean=0.000009 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.599153 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 197 components and 0.599154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.160360Jy  sigma=0.385479
! Fit after  self-cal, rms=0.160358Jy  sigma=0.385448
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133673 Jy
! Component: 100  -  total flux cleaned = 0.000132894 Jy
! Component: 150  -  total flux cleaned = 0.000188392 Jy
! Component: 200  -  total flux cleaned = 0.000241222 Jy
! Total flux subtracted in 200 components = 0.000241222 Jy
! Clean residual min=-0.003593 max=0.003432 Jy/beam
! Clean residual mean=0.000009 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.599395 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 206 components and 0.599395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.160328Jy  sigma=0.384979
! Fit after  self-cal, rms=0.160330Jy  sigma=0.384965
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.160330Jy  sigma=0.384965
! Fit after  self-cal, rms=0.160952Jy  sigma=0.384865
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.266 mas, bmaj=3.987 mas, bpa=-1.415 degrees
! Estimated noise=2.7826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.395923 Jy
! Component: 100  -  total flux cleaned = 0.486401 Jy
! Component: 150  -  total flux cleaned = 0.522597 Jy
! Component: 200  -  total flux cleaned = 0.543361 Jy
! Total flux subtracted in 200 components = 0.543361 Jy
! Clean residual min=-0.006805 max=0.010854 Jy/beam
! Clean residual mean=-0.000016 rms=0.001826 Jy/beam
! Combined flux in latest and established models = 0.543361 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.543361 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.789 mas, bmaj=4.692 mas, bpa=8.908 degrees
! Estimated noise=2.35628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017539 Jy
! Component: 100  -  total flux cleaned = 0.0291393 Jy
! Component: 150  -  total flux cleaned = 0.0373926 Jy
! Component: 200  -  total flux cleaned = 0.041807 Jy
! Total flux subtracted in 200 components = 0.041807 Jy
! Clean residual min=-0.004626 max=0.005354 Jy/beam
! Clean residual mean=0.000003 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.585168 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 61 components and 0.585168 Jy
! Inverting map 
! Added new window around map position (24, -102.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445876 Jy
! Component: 100  -  total flux cleaned = 0.0075613 Jy
! Component: 150  -  total flux cleaned = 0.00974387 Jy
! Component: 200  -  total flux cleaned = 0.0108849 Jy
! Total flux subtracted in 200 components = 0.0108849 Jy
! Clean residual min=-0.004060 max=0.003826 Jy/beam
! Clean residual mean=0.000008 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.596053 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 80 components and 0.596053 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.092 mas, bmaj=8.892 mas, bpa=28.19 degrees
! Estimated noise=2.97423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384702 Jy
! Component: 100  -  total flux cleaned = 0.00373634 Jy
! Component: 150  -  total flux cleaned = 0.00364484 Jy
! Component: 200  -  total flux cleaned = 0.00373883 Jy
! Total flux subtracted in 200 components = 0.00373883 Jy
! Clean residual min=-0.004036 max=0.003851 Jy/beam
! Clean residual mean=0.000023 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.599792 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.1112e-05 Jy
! Component: 100  -  total flux cleaned = -7.78232e-05 Jy
! Component: 150  -  total flux cleaned = -7.53228e-06 Jy
! Component: 200  -  total flux cleaned = -7.24191e-05 Jy
! Total flux subtracted in 200 components = -7.24191e-05 Jy
! Clean residual min=-0.003727 max=0.003888 Jy/beam
! Clean residual mean=0.000022 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.599719 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 140 components and 0.59972 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.789 mas, bmaj=4.692 mas, bpa=8.908 degrees
! Estimated noise=2.35628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.23619e-05 Jy
! Component: 100  -  total flux cleaned = -0.000233267 Jy
! Component: 150  -  total flux cleaned = -2.71188e-05 Jy
! Component: 200  -  total flux cleaned = -2.71153e-05 Jy
! Total flux subtracted in 200 components = -2.71153e-05 Jy
! Clean residual min=-0.003590 max=0.003670 Jy/beam
! Clean residual mean=0.000009 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.599692 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 166 components and 0.599693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.161114Jy  sigma=0.386955
! Fit after  self-cal, rms=0.161038Jy  sigma=0.386404
wmodel J0958+6533_S_h_map.mod
! Writing 166 model components to file: J0958+6533_S_h_map.mod
wobs   J0958+6533_S_h_uvs.fits
! Writing UV FITS file: J0958+6533_S_h_uvs.fits
wwins  J0958+6533_S_h_map.win
! wwins: Wrote 6 windows to J0958+6533_S_h_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.62939e-05 Jy
! Component: 100  -  total flux cleaned = 0.000673793 Jy
! Component: 150  -  total flux cleaned = 0.00109652 Jy
! Component: 200  -  total flux cleaned = 0.00133006 Jy
! Component: 250  -  total flux cleaned = 0.00133006 Jy
! Component: 300  -  total flux cleaned = 0.00138706 Jy
! Component: 350  -  total flux cleaned = 0.00149588 Jy
! Component: 400  -  total flux cleaned = 0.00149578 Jy
! Component: 450  -  total flux cleaned = 0.00154689 Jy
! Component: 500  -  total flux cleaned = 0.00139303 Jy
! Component: 550  -  total flux cleaned = 0.0011925 Jy
! Component: 600  -  total flux cleaned = 0.00114394 Jy
! Component: 650  -  total flux cleaned = 0.00124072 Jy
! Component: 700  -  total flux cleaned = 0.00119151 Jy
! Component: 750  -  total flux cleaned = 0.00114452 Jy
! Component: 800  -  total flux cleaned = 0.00105133 Jy
! Component: 850  -  total flux cleaned = 0.000915439 Jy
! Component: 900  -  total flux cleaned = 0.000824987 Jy
! Component: 950  -  total flux cleaned = 0.000647462 Jy
! Component: 1000  -  total flux cleaned = 0.000385898 Jy
! Component: 1050  -  total flux cleaned = 0.000299167 Jy
! Component: 1100  -  total flux cleaned = 4.26154e-05 Jy
! Component: 1150  -  total flux cleaned = -4.11182e-05 Jy
! Component: 1200  -  total flux cleaned = -0.000250175 Jy
! Component: 1250  -  total flux cleaned = -0.000374321 Jy
! Component: 1300  -  total flux cleaned = -0.000619123 Jy
! Component: 1350  -  total flux cleaned = -0.000538102 Jy
! Component: 1400  -  total flux cleaned = -0.000778676 Jy
! Component: 1450  -  total flux cleaned = -0.000897167 Jy
! Component: 1500  -  total flux cleaned = -0.000936812 Jy
! Component: 1550  -  total flux cleaned = -0.000937312 Jy
! Component: 1600  -  total flux cleaned = -0.00101451 Jy
! Component: 1650  -  total flux cleaned = -0.00124361 Jy
! Component: 1700  -  total flux cleaned = -0.00120564 Jy
! Component: 1750  -  total flux cleaned = -0.00128128 Jy
! Component: 1800  -  total flux cleaned = -0.00150414 Jy
! Component: 1850  -  total flux cleaned = -0.0015779 Jy
! Component: 1900  -  total flux cleaned = -0.00165161 Jy
! Component: 1950  -  total flux cleaned = -0.00179662 Jy
! Component: 2000  -  total flux cleaned = -0.00197655 Jy
! Component: 2050  -  total flux cleaned = -0.0020836 Jy
! Component: 2100  -  total flux cleaned = -0.00208368 Jy
! Component: 2150  -  total flux cleaned = -0.00208397 Jy
! Component: 2200  -  total flux cleaned = -0.00218868 Jy
! Component: 2250  -  total flux cleaned = -0.00239611 Jy
! Component: 2300  -  total flux cleaned = -0.00215585 Jy
! Component: 2350  -  total flux cleaned = -0.00236047 Jy
! Component: 2400  -  total flux cleaned = -0.00232667 Jy
! Component: 2450  -  total flux cleaned = -0.00242714 Jy
! Component: 2500  -  total flux cleaned = -0.00242676 Jy
! Component: 2550  -  total flux cleaned = -0.0023937 Jy
! Component: 2600  -  total flux cleaned = -0.00242671 Jy
! Component: 2650  -  total flux cleaned = -0.00249207 Jy
! Component: 2700  -  total flux cleaned = -0.00258908 Jy
! Component: 2750  -  total flux cleaned = -0.0026533 Jy
! Component: 2800  -  total flux cleaned = -0.00265303 Jy
! Component: 2850  -  total flux cleaned = -0.00271638 Jy
! Component: 2900  -  total flux cleaned = -0.00281093 Jy
! Component: 2950  -  total flux cleaned = -0.00274789 Jy
! Component: 3000  -  total flux cleaned = -0.00277912 Jy
! Component: 3050  -  total flux cleaned = -0.00277948 Jy
! Component: 3100  -  total flux cleaned = -0.00277988 Jy
! Component: 3150  -  total flux cleaned = -0.0029941 Jy
! Component: 3200  -  total flux cleaned = -0.00299408 Jy
! Component: 3250  -  total flux cleaned = -0.00302395 Jy
! Component: 3300  -  total flux cleaned = -0.00302387 Jy
! Component: 3350  -  total flux cleaned = -0.00305363 Jy
! Component: 3400  -  total flux cleaned = -0.00296447 Jy
! Component: 3450  -  total flux cleaned = -0.00302366 Jy
! Component: 3500  -  total flux cleaned = -0.00317033 Jy
! Component: 3550  -  total flux cleaned = -0.00319962 Jy
! Component: 3600  -  total flux cleaned = -0.0031415 Jy
! Component: 3650  -  total flux cleaned = -0.00314163 Jy
! Component: 3700  -  total flux cleaned = -0.0032279 Jy
! Component: 3750  -  total flux cleaned = -0.0032278 Jy
! Component: 3800  -  total flux cleaned = -0.00328484 Jy
! Component: 3850  -  total flux cleaned = -0.00325657 Jy
! Component: 3900  -  total flux cleaned = -0.0032003 Jy
! Component: 3950  -  total flux cleaned = -0.0032285 Jy
! Component: 4000  -  total flux cleaned = -0.00333965 Jy
! Component: 4050  -  total flux cleaned = -0.00339493 Jy
! Total flux subtracted in 4096 components = -0.00339479 Jy
! Clean residual min=-0.001878 max=0.002093 Jy/beam
! Clean residual mean=0.000006 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.596298 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 453 components and 0.596298 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0958+6533_S_h_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.789 x 4.692 at 8.908 degrees (North through East)
! Clean map  min=-0.0032769  max=0.51015 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0958+6533_S_h_map.fits
wmodel /image_prod/ug002_uva//J0958+6533_S_h_map.mod
! Writing 453 model components to file: /image_prod/ug002_uva//J0958+6533_S_h_map.mod
wobs   /image_prod/ug002_uva//J0958+6533_S_h_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0958+6533_S_h_uvs.fits
wwins  /image_prod/ug002_uva//J0958+6533_S_h_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0958+6533_S_h_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.510153 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00048905 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.28759 0.28759 0.575181 1.15036 2.30072 4.60144 9.20289 18.4058 36.8116 73.6231
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.51 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1043.15 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0958+6533_S_h_dfm.log closed on Wed Mar  4 23:18:51 2020