! Started logfile: /image_prod/ug002_uva//J0958+4725_X_j_dfm.log on Wed Mar 4 23:17:54 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0958+4725_X_j_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0958+4725_X_j_uva.fits ! AN table 1: 21 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.816138 visibilities/baseline/integration-bin. ! Found source: J0958+4725 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7404 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0958+4725_X_j] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.479758Jy sigma=8.094829 ! Fit after self-cal, rms=0.184686Jy sigma=0.977265 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7218 mas, bmaj=1.1 mas, bpa=3.709 degrees ! Estimated noise=2.32674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.801987 Jy ! Component: 100 - total flux cleaned = 0.98456 Jy ! Total flux subtracted in 100 components = 0.98456 Jy ! Clean residual min=-0.037390 max=0.067886 Jy/beam ! Clean residual mean=-0.000005 rms=0.007930 Jy/beam ! Combined flux in latest and established models = 0.98456 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.98456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.191035Jy sigma=1.004250 ! Fit after self-cal, rms=0.191024Jy sigma=1.004190 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748612 Jy ! Component: 100 - total flux cleaned = 0.113994 Jy ! Total flux subtracted in 100 components = 0.113994 Jy ! Clean residual min=-0.034518 max=0.042624 Jy/beam ! Clean residual mean=-0.000006 rms=0.006596 Jy/beam ! Combined flux in latest and established models = 1.09855 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 11 components and 1.09855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148119Jy sigma=0.798447 ! Fit after self-cal, rms=0.148114Jy sigma=0.798423 ! Inverting map ! Added new window around map position (-2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332301 Jy ! Component: 100 - total flux cleaned = 0.0448898 Jy ! Total flux subtracted in 100 components = 0.0448898 Jy ! Clean residual min=-0.032933 max=0.037654 Jy/beam ! Clean residual mean=-0.000006 rms=0.006190 Jy/beam ! Combined flux in latest and established models = 1.14344 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 1.14344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139008Jy sigma=0.753166 ! Fit after self-cal, rms=0.138005Jy sigma=0.747699 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9009 mas, bmaj=1.337 mas, bpa=4.099 degrees ! Estimated noise=1.55751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198583 Jy ! Component: 100 - total flux cleaned = 0.0275221 Jy ! Component: 150 - total flux cleaned = 0.0291468 Jy ! Component: 200 - total flux cleaned = 0.0301903 Jy ! Total flux subtracted in 200 components = 0.0301903 Jy ! Clean residual min=-0.029707 max=0.033101 Jy/beam ! Clean residual mean=-0.000026 rms=0.006233 Jy/beam ! Combined flux in latest and established models = 1.17363 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 1.17363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133979Jy sigma=0.730610 ! Fit after self-cal, rms=0.133817Jy sigma=0.729803 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9009 x 1.337 at 4.099 degrees (North through East) ! Clean map min=-0.026979 max=1.0492 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.91 KP 1.05 ! LA 1.04 MK 1.05 OV 0.92 PT 0.92 ! SC 1.11 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.91 KP 1.04 ! LA 1.05 MK 1.05 OV 0.92 PT 0.92 ! SC 1.13 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.90 KP 1.06 ! LA 1.05 MK 1.05 OV 0.92 PT 0.92 ! SC 1.11 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.91 KP 1.04 ! LA 1.05 MK 1.06 OV 0.92 PT 0.92 ! SC 1.10 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.91 KP 1.06 ! LA 1.06 MK 1.04 OV 0.92 PT 0.94 ! SC 1.12 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.91 KP 1.05 ! LA 1.04 MK 1.05 OV 0.92 PT 0.92 ! SC 1.10 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.91 KP 1.05 ! LA 1.05 MK 1.05 OV 0.93 PT 0.92 ! SC 1.11 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.91 KP 1.06 ! LA 1.05 MK 1.06 OV 0.92 PT 0.93 ! SC 1.11 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.90 KP 1.04 ! LA 1.06 MK 1.04 OV 0.93 PT 0.93 ! SC 1.12 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.92 KP 1.03 ! LA 1.05 MK 1.05 OV 0.93 PT 0.94 ! SC 1.14 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.90 KP 1.04 ! LA 1.05 MK 1.07 OV 0.92 PT 0.92 ! SC 1.12 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.92 KP 1.06 ! LA 1.05 MK 1.07 OV 0.92 PT 0.93 ! SC 1.13 ! ! ! Fit before self-cal, rms=0.133817Jy sigma=0.729803 ! Fit after self-cal, rms=0.094941Jy sigma=0.497029 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9184 mas, bmaj=1.35 mas, bpa=3.23 degrees ! Estimated noise=1.56675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.8, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958411 Jy ! Component: 100 - total flux cleaned = -0.00533192 Jy ! Component: 150 - total flux cleaned = -0.00831779 Jy ! Component: 200 - total flux cleaned = -0.00942714 Jy ! Total flux subtracted in 200 components = -0.00942714 Jy ! Clean residual min=-0.013709 max=0.017893 Jy/beam ! Clean residual mean=-0.000031 rms=0.003201 Jy/beam ! Combined flux in latest and established models = 1.16421 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 1.16421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089313Jy sigma=0.466141 ! Fit after self-cal, rms=0.089111Jy sigma=0.464641 ! Inverting map ! Added new window around map position (-0.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013856 Jy ! Component: 100 - total flux cleaned = 0.0135153 Jy ! Component: 150 - total flux cleaned = 0.0121307 Jy ! Component: 200 - total flux cleaned = 0.0114873 Jy ! Total flux subtracted in 200 components = 0.0114873 Jy ! Clean residual min=-0.012494 max=0.016117 Jy/beam ! Clean residual mean=-0.000028 rms=0.002938 Jy/beam ! Combined flux in latest and established models = 1.17569 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 74 components and 1.17569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085060Jy sigma=0.443978 ! Fit after self-cal, rms=0.084830Jy sigma=0.442366 ! Inverting map ! Added new window around map position (18.2, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00994892 Jy ! Component: 100 - total flux cleaned = 0.0108296 Jy ! Component: 150 - total flux cleaned = 0.00978706 Jy ! Component: 200 - total flux cleaned = 0.00856107 Jy ! Total flux subtracted in 200 components = 0.00856107 Jy ! Clean residual min=-0.010900 max=0.013303 Jy/beam ! Clean residual mean=-0.000024 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 1.18426 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 1.18426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080898Jy sigma=0.422624 ! Fit after self-cal, rms=0.080753Jy sigma=0.421673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080753Jy sigma=0.421673 ! Fit after self-cal, rms=0.067582Jy sigma=0.345117 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9124 mas, bmaj=1.35 mas, bpa=4.367 degrees ! Estimated noise=1.56357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00376928 Jy ! Component: 100 - total flux cleaned = -0.00507658 Jy ! Component: 150 - total flux cleaned = -0.00617175 Jy ! Component: 200 - total flux cleaned = -0.0072874 Jy ! Total flux subtracted in 200 components = -0.0072874 Jy ! Clean residual min=-0.007869 max=0.006355 Jy/beam ! Clean residual mean=0.000001 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 1.17697 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 1.17697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065370Jy sigma=0.334058 ! Fit after self-cal, rms=0.065119Jy sigma=0.332797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018851 Jy ! Component: 100 - total flux cleaned = -0.00267664 Jy ! Component: 150 - total flux cleaned = -0.00325916 Jy ! Component: 200 - total flux cleaned = -0.0035237 Jy ! Total flux subtracted in 200 components = -0.0035237 Jy ! Clean residual min=-0.007407 max=0.005862 Jy/beam ! Clean residual mean=0.000002 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 1.17344 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 1.17344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064369Jy sigma=0.329177 ! Fit after self-cal, rms=0.064307Jy sigma=0.328932 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064307Jy sigma=0.328932 ! Fit after self-cal, rms=0.064053Jy sigma=0.326377 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9118 mas, bmaj=1.35 mas, bpa=4.513 degrees ! Estimated noise=1.56257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298641 Jy ! Component: 100 - total flux cleaned = -0.00384278 Jy ! Component: 150 - total flux cleaned = -0.00444215 Jy ! Component: 200 - total flux cleaned = -0.0045713 Jy ! Total flux subtracted in 200 components = -0.0045713 Jy ! Clean residual min=-0.006183 max=0.005403 Jy/beam ! Clean residual mean=-0.000003 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 1.16887 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 1.16887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063162Jy sigma=0.322049 ! Fit after self-cal, rms=0.063079Jy sigma=0.321689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131177 Jy ! Component: 100 - total flux cleaned = -0.00142526 Jy ! Component: 150 - total flux cleaned = -0.00141992 Jy ! Component: 200 - total flux cleaned = -0.00141863 Jy ! Total flux subtracted in 200 components = -0.00141863 Jy ! Clean residual min=-0.005820 max=0.005097 Jy/beam ! Clean residual mean=-0.000002 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 1.16745 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 1.16745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062671Jy sigma=0.319732 ! Fit after self-cal, rms=0.062645Jy sigma=0.319647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062645Jy sigma=0.319647 ! Fit after self-cal, rms=0.062577Jy sigma=0.318535 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.212 mas, bmaj=2.46 mas, bpa=40.36 degrees ! Estimated noise=2.16305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.60148e-05 Jy ! Component: 100 - total flux cleaned = -7.02988e-05 Jy ! Component: 150 - total flux cleaned = -0.000278918 Jy ! Component: 200 - total flux cleaned = -0.000276891 Jy ! Total flux subtracted in 200 components = -0.000276891 Jy ! Clean residual min=-0.004647 max=0.004870 Jy/beam ! Clean residual mean=-0.000010 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 1.16718 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 1.16718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062285Jy sigma=0.317328 ! Fit after self-cal, rms=0.062254Jy sigma=0.317220 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401874 Jy ! Component: 100 - total flux cleaned = -0.000483216 Jy ! Component: 150 - total flux cleaned = -0.00048118 Jy ! Component: 200 - total flux cleaned = -0.000546582 Jy ! Total flux subtracted in 200 components = -0.000546582 Jy ! Clean residual min=-0.004529 max=0.004589 Jy/beam ! Clean residual mean=-0.000011 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 1.16663 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 141 components and 1.16663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062133Jy sigma=0.316745 ! Fit after self-cal, rms=0.062115Jy sigma=0.316700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9109 mas, bmaj=1.35 mas, bpa=4.616 degrees ! Estimated noise=1.56196 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9109 x 1.35 at 4.616 degrees (North through East) ! Clean map min=-0.0066252 max=1.0493 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062115Jy sigma=0.316700 ! Fit after self-cal, rms=0.057925Jy sigma=0.288461 ! Inverting map and beam ! Estimated beam: bmin=0.9098 mas, bmaj=1.351 mas, bpa=4.67 degrees ! Estimated noise=1.5612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180925 Jy ! Component: 100 - total flux cleaned = -0.00228751 Jy ! Component: 150 - total flux cleaned = -0.00229134 Jy ! Component: 200 - total flux cleaned = -0.00229422 Jy ! Total flux subtracted in 200 components = -0.00229422 Jy ! Clean residual min=-0.004758 max=0.004136 Jy/beam ! Clean residual mean=-0.000006 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 1.16434 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 147 components and 1.16434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057459Jy sigma=0.286106 ! Fit after self-cal, rms=0.057416Jy sigma=0.285960 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000662557 Jy ! Component: 100 - total flux cleaned = -0.000664779 Jy ! Component: 150 - total flux cleaned = -0.000665379 Jy ! Component: 200 - total flux cleaned = -0.000590419 Jy ! Total flux subtracted in 200 components = -0.000590419 Jy ! Clean residual min=-0.004628 max=0.003981 Jy/beam ! Clean residual mean=-0.000006 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 1.16375 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 152 components and 1.16375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057191Jy sigma=0.284765 ! Fit after self-cal, rms=0.057177Jy sigma=0.284729 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057177Jy sigma=0.284729 ! Fit after self-cal, rms=0.057144Jy sigma=0.284166 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7298 mas, bmaj=1.115 mas, bpa=4.059 degrees ! Estimated noise=2.34924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.809058 Jy ! Component: 100 - total flux cleaned = 0.989177 Jy ! Component: 150 - total flux cleaned = 1.05539 Jy ! Component: 200 - total flux cleaned = 1.08912 Jy ! Total flux subtracted in 200 components = 1.08912 Jy ! Clean residual min=-0.011214 max=0.017634 Jy/beam ! Clean residual mean=-0.000003 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 1.08912 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.08912 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9092 mas, bmaj=1.35 mas, bpa=4.748 degrees ! Estimated noise=1.56115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273917 Jy ! Component: 100 - total flux cleaned = 0.0438903 Jy ! Component: 150 - total flux cleaned = 0.0554149 Jy ! Component: 200 - total flux cleaned = 0.0640772 Jy ! Total flux subtracted in 200 components = 0.0640772 Jy ! Clean residual min=-0.005554 max=0.005727 Jy/beam ! Clean residual mean=-0.000012 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 1.1532 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 1.1532 Jy ! Inverting map ! Added new window around map position (8.8, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686739 Jy ! Component: 100 - total flux cleaned = 0.0102149 Jy ! Component: 150 - total flux cleaned = 0.0113863 Jy ! Component: 200 - total flux cleaned = 0.0120826 Jy ! Total flux subtracted in 200 components = 0.0120826 Jy ! Clean residual min=-0.004633 max=0.005005 Jy/beam ! Clean residual mean=-0.000012 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 1.16528 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 1.16528 Jy ! Inverting map ! Added new window around map position (5.2, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220507 Jy ! Component: 100 - total flux cleaned = 0.00220373 Jy ! Component: 150 - total flux cleaned = 0.00234859 Jy ! Component: 200 - total flux cleaned = 0.00234724 Jy ! Total flux subtracted in 200 components = 0.00234724 Jy ! Clean residual min=-0.004273 max=0.004239 Jy/beam ! Clean residual mean=-0.000012 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 1.16763 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 77 components and 1.16763 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.21 mas, bmaj=2.463 mas, bpa=40.36 degrees ! Estimated noise=2.16501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142092 Jy ! Component: 100 - total flux cleaned = 0.00109679 Jy ! Component: 150 - total flux cleaned = 0.00073818 Jy ! Component: 200 - total flux cleaned = 0.000545037 Jy ! Total flux subtracted in 200 components = 0.000545037 Jy ! Clean residual min=-0.003823 max=0.003473 Jy/beam ! Clean residual mean=-0.000026 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 1.16817 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118886 Jy ! Component: 100 - total flux cleaned = -0.000172137 Jy ! Component: 150 - total flux cleaned = -0.000171586 Jy ! Component: 200 - total flux cleaned = -0.000170609 Jy ! Total flux subtracted in 200 components = -0.000170609 Jy ! Clean residual min=-0.003727 max=0.003414 Jy/beam ! Clean residual mean=-0.000026 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 1.168 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 115 components and 1.168 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9092 mas, bmaj=1.35 mas, bpa=4.748 degrees ! Estimated noise=1.56115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123716 Jy ! Component: 100 - total flux cleaned = -0.00100282 Jy ! Component: 150 - total flux cleaned = -0.000999249 Jy ! Component: 200 - total flux cleaned = -0.00109945 Jy ! Total flux subtracted in 200 components = -0.00109945 Jy ! Clean residual min=-0.003586 max=0.003530 Jy/beam ! Clean residual mean=-0.000010 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 1.1669 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 127 components and 1.1669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057056Jy sigma=0.283271 ! Fit after self-cal, rms=0.056781Jy sigma=0.281756 wmodel J0958+4725_X_j_map.mod ! Writing 127 model components to file: J0958+4725_X_j_map.mod wobs J0958+4725_X_j_uvs.fits ! Writing UV FITS file: J0958+4725_X_j_uvs.fits wwins J0958+4725_X_j_map.win ! wwins: Wrote 8 windows to J0958+4725_X_j_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132637 Jy ! Component: 100 - total flux cleaned = 0.00199749 Jy ! Component: 150 - total flux cleaned = 0.00228691 Jy ! Component: 200 - total flux cleaned = 0.00234307 Jy ! Component: 250 - total flux cleaned = 0.00234401 Jy ! Component: 300 - total flux cleaned = 0.0023442 Jy ! Component: 350 - total flux cleaned = 0.00229391 Jy ! Component: 400 - total flux cleaned = 0.00219348 Jy ! Component: 450 - total flux cleaned = 0.00199894 Jy ! Component: 500 - total flux cleaned = 0.00199855 Jy ! Component: 550 - total flux cleaned = 0.00209013 Jy ! Component: 600 - total flux cleaned = 0.00213479 Jy ! Component: 650 - total flux cleaned = 0.00217942 Jy ! Component: 700 - total flux cleaned = 0.00226805 Jy ! Component: 750 - total flux cleaned = 0.00256856 Jy ! Component: 800 - total flux cleaned = 0.00265232 Jy ! Component: 850 - total flux cleaned = 0.00285928 Jy ! Component: 900 - total flux cleaned = 0.00306254 Jy ! Component: 950 - total flux cleaned = 0.00318161 Jy ! Component: 1000 - total flux cleaned = 0.00322124 Jy ! Component: 1050 - total flux cleaned = 0.00341603 Jy ! Component: 1100 - total flux cleaned = 0.00345443 Jy ! Component: 1150 - total flux cleaned = 0.00356807 Jy ! Component: 1200 - total flux cleaned = 0.00364282 Jy ! Component: 1250 - total flux cleaned = 0.00368004 Jy ! Component: 1300 - total flux cleaned = 0.00364321 Jy ! Component: 1350 - total flux cleaned = 0.00375044 Jy ! Component: 1400 - total flux cleaned = 0.00367973 Jy ! Component: 1450 - total flux cleaned = 0.00381904 Jy ! Component: 1500 - total flux cleaned = 0.00385287 Jy ! Component: 1550 - total flux cleaned = 0.00388587 Jy ! Component: 1600 - total flux cleaned = 0.0038516 Jy ! Component: 1650 - total flux cleaned = 0.00385202 Jy ! Component: 1700 - total flux cleaned = 0.0037861 Jy ! Component: 1750 - total flux cleaned = 0.00368862 Jy ! Component: 1800 - total flux cleaned = 0.00362453 Jy ! Component: 1850 - total flux cleaned = 0.00356072 Jy ! Component: 1900 - total flux cleaned = 0.00349817 Jy ! Component: 1950 - total flux cleaned = 0.00346735 Jy ! Component: 2000 - total flux cleaned = 0.00346779 Jy ! Component: 2050 - total flux cleaned = 0.00343736 Jy ! Component: 2100 - total flux cleaned = 0.00328806 Jy ! Component: 2150 - total flux cleaned = 0.00334728 Jy ! Component: 2200 - total flux cleaned = 0.00337679 Jy ! Component: 2250 - total flux cleaned = 0.00334728 Jy ! Component: 2300 - total flux cleaned = 0.00331919 Jy ! Component: 2350 - total flux cleaned = 0.00329042 Jy ! Component: 2400 - total flux cleaned = 0.00326229 Jy ! Component: 2450 - total flux cleaned = 0.00326189 Jy ! Component: 2500 - total flux cleaned = 0.0031797 Jy ! Component: 2550 - total flux cleaned = 0.00304403 Jy ! Component: 2600 - total flux cleaned = 0.0030443 Jy ! Component: 2650 - total flux cleaned = 0.00291065 Jy ! Component: 2700 - total flux cleaned = 0.00283202 Jy ! Component: 2750 - total flux cleaned = 0.00275407 Jy ! Component: 2800 - total flux cleaned = 0.00275405 Jy ! Component: 2850 - total flux cleaned = 0.00277926 Jy ! Component: 2900 - total flux cleaned = 0.00262683 Jy ! Component: 2950 - total flux cleaned = 0.00257706 Jy ! Component: 3000 - total flux cleaned = 0.00252756 Jy ! Component: 3050 - total flux cleaned = 0.00250314 Jy ! Component: 3100 - total flux cleaned = 0.00242972 Jy ! Component: 3150 - total flux cleaned = 0.00238108 Jy ! Component: 3200 - total flux cleaned = 0.00240543 Jy ! Component: 3250 - total flux cleaned = 0.00238172 Jy ! Component: 3300 - total flux cleaned = 0.002453 Jy ! Component: 3350 - total flux cleaned = 0.00233552 Jy ! Component: 3400 - total flux cleaned = 0.00228884 Jy ! Component: 3450 - total flux cleaned = 0.00233505 Jy ! Component: 3500 - total flux cleaned = 0.00233488 Jy ! Component: 3550 - total flux cleaned = 0.0022668 Jy ! Component: 3600 - total flux cleaned = 0.00226662 Jy ! Component: 3650 - total flux cleaned = 0.00231127 Jy ! Component: 3700 - total flux cleaned = 0.00224451 Jy ! Component: 3750 - total flux cleaned = 0.00226651 Jy ! Component: 3800 - total flux cleaned = 0.00222302 Jy ! Component: 3850 - total flux cleaned = 0.0022234 Jy ! Component: 3900 - total flux cleaned = 0.0021589 Jy ! Component: 3950 - total flux cleaned = 0.00226561 Jy ! Component: 4000 - total flux cleaned = 0.00213861 Jy ! Component: 4050 - total flux cleaned = 0.00215996 Jy ! Total flux subtracted in 4096 components = 0.00218066 Jy ! Clean residual min=-0.001307 max=0.001060 Jy/beam ! Clean residual mean=-0.000004 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 1.16908 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 444 components and 1.16908 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0958+4725_X_j_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9092 x 1.35 at 4.748 degrees (North through East) ! Clean map min=-0.0036962 max=1.0551 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0958+4725_X_j_map.fits wmodel /image_prod/ug002_uva//J0958+4725_X_j_map.mod ! Writing 444 model components to file: /image_prod/ug002_uva//J0958+4725_X_j_map.mod wobs /image_prod/ug002_uva//J0958+4725_X_j_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0958+4725_X_j_uvs.fits wwins /image_prod/ug002_uva//J0958+4725_X_j_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0958+4725_X_j_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.05512 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000343344 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0976222 0.0976222 0.195244 0.390489 0.780978 1.56196 3.12391 6.24782 12.4956 24.9913 49.9826 99.9652 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3073.07 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0958+4725_X_j_dfm.log closed on Wed Mar 4 23:17:58 2020