! Started logfile: /image_prod/ug002_uva//J0958+4725_X_g_dfm.log on Wed Mar 4 23:17:39 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0958+4725_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0958+4725_X_g_uva.fits ! AN table 1: 5 integrations on 21 of 21 possible baselines. ! AN table 2: 12 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.904762 visibilities/baseline/integration-bin. ! Found source: J0958+4725 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 3876 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0958+4725_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.393722Jy sigma=7.749148 ! Fit after self-cal, rms=0.192543Jy sigma=1.129938 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7364 mas, bmaj=1.172 mas, bpa=2.025 degrees ! Estimated noise=3.20973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.712949 Jy ! Component: 100 - total flux cleaned = 0.874876 Jy ! Total flux subtracted in 100 components = 0.874876 Jy ! Clean residual min=-0.050437 max=0.060610 Jy/beam ! Clean residual mean=0.000085 rms=0.011057 Jy/beam ! Combined flux in latest and established models = 0.874876 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.874876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.210020Jy sigma=1.155424 ! Fit after self-cal, rms=0.210009Jy sigma=1.155382 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8882 mas, bmaj=1.403 mas, bpa=4.99 degrees ! Estimated noise=2.07224 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0915601 Jy ! Component: 100 - total flux cleaned = 0.139851 Jy ! Component: 150 - total flux cleaned = 0.169038 Jy ! Component: 200 - total flux cleaned = 0.187405 Jy ! Total flux subtracted in 200 components = 0.187405 Jy ! Clean residual min=-0.042876 max=0.048724 Jy/beam ! Clean residual mean=-0.000004 rms=0.009455 Jy/beam ! Combined flux in latest and established models = 1.06228 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.06228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.161226Jy sigma=0.932803 ! Fit after self-cal, rms=0.161091Jy sigma=0.932054 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8882 x 1.403 at 4.99 degrees (North through East) ! Clean map min=-0.039205 max=0.94092 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 1.23 KP 0.98 LA 0.97 ! MK 1.33 NL 1.14 OV 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 KP 0.98 LA 1.00 MK 1.00 ! NL 1.12 OV 0.87 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 HN 1.20 KP 0.97 LA 0.97 ! MK 1.37 NL 1.13 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 KP 0.99 LA 0.98 MK 1.01 ! NL 1.12 OV 0.88 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 HN 1.21 KP 1.00 LA 1.00 ! MK 1.34 NL 1.13 OV 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 KP 0.99 LA 1.00 MK 1.02 ! NL 1.11 OV 0.88 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 HN 1.20 KP 1.00 LA 1.00 ! MK 1.35 NL 1.14 OV 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 KP 0.99 LA 1.00 MK 1.04 ! NL 1.12 OV 0.87 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 1.20 KP 0.97 LA 0.99 ! MK 1.33 NL 1.11 OV 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 KP 1.00 LA 1.01 MK 0.98 ! NL 1.11 OV 0.88 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 1.23 KP 1.00 LA 1.00 ! MK 1.37 NL 1.14 OV 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 KP 1.00 LA 0.99 MK 1.03 ! NL 1.12 OV 0.88 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 1.27 KP 0.99 LA 0.99 ! MK 1.42 NL 1.12 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 KP 0.98 LA 0.99 MK 1.04 ! NL 1.12 OV 0.89 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 HN 1.23 KP 1.00 LA 1.01 ! MK 1.44 NL 1.13 OV 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 KP 1.00 LA 1.00 MK 1.05 ! NL 1.14 OV 0.86 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 1.23 KP 1.01 LA 0.99 ! MK 1.47 NL 1.13 OV 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 KP 1.00 LA 1.00 MK 1.08 ! NL 1.11 OV 0.87 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 HN 1.20 KP 0.99 LA 1.00 ! MK 1.44 NL 1.13 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 KP 0.99 LA 1.01 MK 1.09 ! NL 1.14 OV 0.89 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 1.24 KP 0.98 LA 1.01 ! MK 1.43 NL 1.14 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 KP 1.00 LA 1.00 MK 1.06 ! NL 1.13 OV 0.88 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 1.21 KP 0.98 LA 1.01 ! MK 1.45 NL 1.14 OV 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 KP 0.99 LA 1.01 MK 1.09 ! NL 1.13 OV 0.88 SC 1.00 ! ! ! Fit before self-cal, rms=0.161091Jy sigma=0.932054 ! Fit after self-cal, rms=0.103676Jy sigma=0.511381 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.895 mas, bmaj=1.421 mas, bpa=4.03 degrees ! Estimated noise=2.08329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.024764 Jy ! Component: 100 - total flux cleaned = -0.0267701 Jy ! Component: 150 - total flux cleaned = -0.0282673 Jy ! Component: 200 - total flux cleaned = -0.0290479 Jy ! Total flux subtracted in 200 components = -0.0290479 Jy ! Clean residual min=-0.009999 max=0.014448 Jy/beam ! Clean residual mean=0.000012 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 1.03323 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 1.03323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094652Jy sigma=0.458028 ! Fit after self-cal, rms=0.094671Jy sigma=0.457493 ! Inverting map ! Added new window around map position (1.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112494 Jy ! Component: 100 - total flux cleaned = 0.011555 Jy ! Component: 150 - total flux cleaned = 0.0126176 Jy ! Component: 200 - total flux cleaned = 0.013533 Jy ! Total flux subtracted in 200 components = 0.013533 Jy ! Clean residual min=-0.008612 max=0.008873 Jy/beam ! Clean residual mean=0.000005 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 1.04677 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 1.04677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092504Jy sigma=0.442131 ! Fit after self-cal, rms=0.092305Jy sigma=0.440919 ! Inverting map ! Added new window around map position (-4.2, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897252 Jy ! Component: 100 - total flux cleaned = 0.0120944 Jy ! Component: 150 - total flux cleaned = 0.0126571 Jy ! Component: 200 - total flux cleaned = 0.0130028 Jy ! Total flux subtracted in 200 components = 0.0130028 Jy ! Clean residual min=-0.007152 max=0.006985 Jy/beam ! Clean residual mean=0.000003 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 1.05977 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 1.05977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091190Jy sigma=0.433421 ! Fit after self-cal, rms=0.091103Jy sigma=0.432869 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091103Jy sigma=0.432869 ! Fit after self-cal, rms=0.092705Jy sigma=0.422382 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8914 mas, bmaj=1.42 mas, bpa=4.078 degrees ! Estimated noise=2.08244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000338097 Jy ! Component: 100 - total flux cleaned = -0.000672547 Jy ! Component: 150 - total flux cleaned = -0.000970003 Jy ! Component: 200 - total flux cleaned = -0.0012389 Jy ! Total flux subtracted in 200 components = -0.0012389 Jy ! Clean residual min=-0.005152 max=0.005324 Jy/beam ! Clean residual mean=-0.000004 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 1.05853 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 1.05853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092138Jy sigma=0.419471 ! Fit after self-cal, rms=0.092141Jy sigma=0.419433 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335401 Jy ! Component: 100 - total flux cleaned = 0.00387706 Jy ! Component: 150 - total flux cleaned = 0.00409905 Jy ! Component: 200 - total flux cleaned = 0.00378193 Jy ! Total flux subtracted in 200 components = 0.00378193 Jy ! Clean residual min=-0.004562 max=0.004561 Jy/beam ! Clean residual mean=-0.000006 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 1.06231 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 1.06231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091762Jy sigma=0.417282 ! Fit after self-cal, rms=0.091751Jy sigma=0.417200 ! Inverting map ! Added new window around map position (-14, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000797108 Jy ! Component: 100 - total flux cleaned = -0.000137714 Jy ! Component: 150 - total flux cleaned = -0.000238143 Jy ! Component: 200 - total flux cleaned = -0.000241049 Jy ! Total flux subtracted in 200 components = -0.000241049 Jy ! Clean residual min=-0.003865 max=0.003621 Jy/beam ! Clean residual mean=-0.000007 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 1.06207 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 1.06207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091424Jy sigma=0.415373 ! Fit after self-cal, rms=0.091408Jy sigma=0.415291 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091408Jy sigma=0.415291 ! Fit after self-cal, rms=0.092041Jy sigma=0.414885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8905 mas, bmaj=1.419 mas, bpa=4.035 degrees ! Estimated noise=2.08274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000489814 Jy ! Component: 100 - total flux cleaned = -0.000973238 Jy ! Component: 150 - total flux cleaned = -0.00114777 Jy ! Component: 200 - total flux cleaned = -0.0016448 Jy ! Total flux subtracted in 200 components = -0.0016448 Jy ! Clean residual min=-0.003605 max=0.003476 Jy/beam ! Clean residual mean=-0.000009 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 1.06043 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 1.06043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091812Jy sigma=0.413986 ! Fit after self-cal, rms=0.091807Jy sigma=0.413970 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495112 Jy ! Component: 100 - total flux cleaned = -0.000567262 Jy ! Component: 150 - total flux cleaned = -0.000775227 Jy ! Component: 200 - total flux cleaned = -0.000907024 Jy ! Total flux subtracted in 200 components = -0.000907024 Jy ! Clean residual min=-0.003581 max=0.003394 Jy/beam ! Clean residual mean=-0.000009 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 1.05952 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 111 components and 1.05952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091685Jy sigma=0.413448 ! Fit after self-cal, rms=0.091682Jy sigma=0.413438 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091682Jy sigma=0.413438 ! Fit after self-cal, rms=0.092158Jy sigma=0.413264 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.983 mas, bmaj=2.406 mas, bpa=16.1 degrees ! Estimated noise=2.71097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123467 Jy ! Component: 100 - total flux cleaned = -0.00181601 Jy ! Component: 150 - total flux cleaned = -0.00215139 Jy ! Component: 200 - total flux cleaned = -0.00255312 Jy ! Total flux subtracted in 200 components = -0.00255312 Jy ! Clean residual min=-0.003786 max=0.003487 Jy/beam ! Clean residual mean=-0.000022 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 1.05697 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 128 components and 1.05697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092085Jy sigma=0.413116 ! Fit after self-cal, rms=0.092080Jy sigma=0.413103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000412435 Jy ! Component: 100 - total flux cleaned = -0.000701895 Jy ! Component: 150 - total flux cleaned = -0.00105156 Jy ! Component: 200 - total flux cleaned = -0.00130712 Jy ! Total flux subtracted in 200 components = -0.00130712 Jy ! Clean residual min=-0.003663 max=0.003392 Jy/beam ! Clean residual mean=-0.000022 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 1.05566 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 132 components and 1.05566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092041Jy sigma=0.413050 ! Fit after self-cal, rms=0.092039Jy sigma=0.413044 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8897 mas, bmaj=1.418 mas, bpa=3.989 degrees ! Estimated noise=2.08381 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8897 x 1.418 at 3.989 degrees (North through East) ! Clean map min=-0.0044861 max=0.94934 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092039Jy sigma=0.413044 ! Fit after self-cal, rms=0.054595Jy sigma=0.254878 ! Inverting map and beam ! Estimated beam: bmin=0.8906 mas, bmaj=1.418 mas, bpa=3.982 degrees ! Estimated noise=2.08315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265956 Jy ! Component: 100 - total flux cleaned = -0.000177756 Jy ! Component: 150 - total flux cleaned = -1.66062e-05 Jy ! Component: 200 - total flux cleaned = -8.84346e-05 Jy ! Total flux subtracted in 200 components = -8.84346e-05 Jy ! Clean residual min=-0.002867 max=0.002592 Jy/beam ! Clean residual mean=-0.000002 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 1.05557 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 1.05557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054308Jy sigma=0.253413 ! Fit after self-cal, rms=0.054303Jy sigma=0.253383 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213056 Jy ! Component: 100 - total flux cleaned = -0.000342349 Jy ! Component: 150 - total flux cleaned = -0.00057348 Jy ! Component: 200 - total flux cleaned = -0.000679023 Jy ! Total flux subtracted in 200 components = -0.000679023 Jy ! Clean residual min=-0.002693 max=0.002421 Jy/beam ! Clean residual mean=-0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 1.05489 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 1.05489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054171Jy sigma=0.252726 ! Fit after self-cal, rms=0.054168Jy sigma=0.252713 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054168Jy sigma=0.252713 ! Fit after self-cal, rms=0.054128Jy sigma=0.252547 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7307 mas, bmaj=1.178 mas, bpa=1.129 degrees ! Estimated noise=3.28464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.729541 Jy ! Component: 100 - total flux cleaned = 0.892564 Jy ! Component: 150 - total flux cleaned = 0.95273 Jy ! Component: 200 - total flux cleaned = 0.98503 Jy ! Total flux subtracted in 200 components = 0.98503 Jy ! Clean residual min=-0.010191 max=0.016887 Jy/beam ! Clean residual mean=0.000031 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.98503 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.98503 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8901 mas, bmaj=1.417 mas, bpa=3.984 degrees ! Estimated noise=2.08247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252283 Jy ! Component: 100 - total flux cleaned = 0.039389 Jy ! Component: 150 - total flux cleaned = 0.0482469 Jy ! Component: 200 - total flux cleaned = 0.0548006 Jy ! Total flux subtracted in 200 components = 0.0548006 Jy ! Clean residual min=-0.004370 max=0.005137 Jy/beam ! Clean residual mean=0.000008 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 1.03983 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 1.03983 Jy ! Inverting map ! Added new window around map position (-3.2, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556865 Jy ! Component: 100 - total flux cleaned = 0.00893368 Jy ! Component: 150 - total flux cleaned = 0.0116471 Jy ! Component: 200 - total flux cleaned = 0.0134945 Jy ! Total flux subtracted in 200 components = 0.0134945 Jy ! Clean residual min=-0.003378 max=0.003437 Jy/beam ! Clean residual mean=0.000001 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 1.05332 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 44 components and 1.05333 Jy ! Inverting map ! Added new window around map position (3.2, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279275 Jy ! Component: 100 - total flux cleaned = 0.00386956 Jy ! Component: 150 - total flux cleaned = 0.00474405 Jy ! Component: 200 - total flux cleaned = 0.00518971 Jy ! Total flux subtracted in 200 components = 0.00518971 Jy ! Clean residual min=-0.003087 max=0.003015 Jy/beam ! Clean residual mean=-0.000001 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 1.05851 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 63 components and 1.05852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.983 mas, bmaj=2.402 mas, bpa=16.46 degrees ! Estimated noise=2.71093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013946 Jy ! Component: 100 - total flux cleaned = 0.00238132 Jy ! Component: 150 - total flux cleaned = 0.00294686 Jy ! Component: 200 - total flux cleaned = 0.00324376 Jy ! Total flux subtracted in 200 components = 0.00324376 Jy ! Clean residual min=-0.002288 max=0.002545 Jy/beam ! Clean residual mean=-0.000010 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 1.06176 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174724 Jy ! Component: 100 - total flux cleaned = 0.000135198 Jy ! Component: 150 - total flux cleaned = 0.000134171 Jy ! Component: 200 - total flux cleaned = 6.39828e-05 Jy ! Total flux subtracted in 200 components = 6.39828e-05 Jy ! Clean residual min=-0.002164 max=0.002486 Jy/beam ! Clean residual mean=-0.000011 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 1.06182 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 98 components and 1.06182 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8901 mas, bmaj=1.417 mas, bpa=3.984 degrees ! Estimated noise=2.08247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000244092 Jy ! Component: 100 - total flux cleaned = -0.000311368 Jy ! Component: 150 - total flux cleaned = -0.000178877 Jy ! Component: 200 - total flux cleaned = -0.00018038 Jy ! Total flux subtracted in 200 components = -0.00018038 Jy ! Clean residual min=-0.002591 max=0.002612 Jy/beam ! Clean residual mean=-0.000004 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 1.06164 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 1.06164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054037Jy sigma=0.252664 ! Fit after self-cal, rms=0.053997Jy sigma=0.252424 wmodel J0958+4725_X_g_map.mod ! Writing 114 model components to file: J0958+4725_X_g_map.mod wobs J0958+4725_X_g_uvs.fits ! Writing UV FITS file: J0958+4725_X_g_uvs.fits wwins J0958+4725_X_g_map.win ! wwins: Wrote 7 windows to J0958+4725_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.88294e-05 Jy ! Component: 100 - total flux cleaned = 0.000190812 Jy ! Component: 150 - total flux cleaned = 0.000397152 Jy ! Component: 200 - total flux cleaned = 0.000515602 Jy ! Component: 250 - total flux cleaned = 0.000438455 Jy ! Component: 300 - total flux cleaned = 0.000438422 Jy ! Component: 350 - total flux cleaned = 0.000330886 Jy ! Component: 400 - total flux cleaned = 0.000226282 Jy ! Component: 450 - total flux cleaned = 0.000158059 Jy ! Component: 500 - total flux cleaned = -4.04534e-05 Jy ! Component: 550 - total flux cleaned = -0.000137194 Jy ! Component: 600 - total flux cleaned = -0.000327009 Jy ! Component: 650 - total flux cleaned = -0.000513154 Jy ! Component: 700 - total flux cleaned = -0.00072592 Jy ! Component: 750 - total flux cleaned = -0.000815291 Jy ! Component: 800 - total flux cleaned = -0.000961679 Jy ! Component: 850 - total flux cleaned = -0.00096243 Jy ! Component: 900 - total flux cleaned = -0.00110422 Jy ! Component: 950 - total flux cleaned = -0.00115942 Jy ! Component: 1000 - total flux cleaned = -0.00110473 Jy ! Component: 1050 - total flux cleaned = -0.00110516 Jy ! Component: 1100 - total flux cleaned = -0.00118458 Jy ! Component: 1150 - total flux cleaned = -0.00115862 Jy ! Component: 1200 - total flux cleaned = -0.00120997 Jy ! Component: 1250 - total flux cleaned = -0.00123568 Jy ! Component: 1300 - total flux cleaned = -0.00128609 Jy ! Component: 1350 - total flux cleaned = -0.00136065 Jy ! Component: 1400 - total flux cleaned = -0.00136054 Jy ! Component: 1450 - total flux cleaned = -0.00150559 Jy ! Component: 1500 - total flux cleaned = -0.00145745 Jy ! Component: 1550 - total flux cleaned = -0.00150448 Jy ! Component: 1600 - total flux cleaned = -0.0015744 Jy ! Component: 1650 - total flux cleaned = -0.00155116 Jy ! Component: 1700 - total flux cleaned = -0.0015515 Jy ! Component: 1750 - total flux cleaned = -0.0015519 Jy ! Component: 1800 - total flux cleaned = -0.00161867 Jy ! Component: 1850 - total flux cleaned = -0.00170639 Jy ! Component: 1900 - total flux cleaned = -0.0016845 Jy ! Component: 1950 - total flux cleaned = -0.00164156 Jy ! Component: 2000 - total flux cleaned = -0.00164207 Jy ! Component: 2050 - total flux cleaned = -0.00170561 Jy ! Component: 2100 - total flux cleaned = -0.00170545 Jy ! Component: 2150 - total flux cleaned = -0.00180823 Jy ! Component: 2200 - total flux cleaned = -0.00162401 Jy ! Component: 2250 - total flux cleaned = -0.00170529 Jy ! Component: 2300 - total flux cleaned = -0.00168511 Jy ! Component: 2350 - total flux cleaned = -0.00166527 Jy ! Component: 2400 - total flux cleaned = -0.00160601 Jy ! Component: 2450 - total flux cleaned = -0.00164525 Jy ! Component: 2500 - total flux cleaned = -0.00168382 Jy ! Component: 2550 - total flux cleaned = -0.0016839 Jy ! Component: 2600 - total flux cleaned = -0.0017029 Jy ! Component: 2650 - total flux cleaned = -0.00166529 Jy ! Component: 2700 - total flux cleaned = -0.00172142 Jy ! Component: 2750 - total flux cleaned = -0.00179526 Jy ! Component: 2800 - total flux cleaned = -0.00179498 Jy ! Component: 2850 - total flux cleaned = -0.00181297 Jy ! Component: 2900 - total flux cleaned = -0.0018129 Jy ! Component: 2950 - total flux cleaned = -0.00177719 Jy ! Component: 3000 - total flux cleaned = -0.00184824 Jy ! Component: 3050 - total flux cleaned = -0.0019713 Jy ! Component: 3100 - total flux cleaned = -0.00188407 Jy ! Component: 3150 - total flux cleaned = -0.00195329 Jy ! Component: 3200 - total flux cleaned = -0.00193612 Jy ! Component: 3250 - total flux cleaned = -0.00197016 Jy ! Component: 3300 - total flux cleaned = -0.00200398 Jy ! Component: 3350 - total flux cleaned = -0.00202078 Jy ! Component: 3400 - total flux cleaned = -0.00205406 Jy ! Component: 3450 - total flux cleaned = -0.00205433 Jy ! Component: 3500 - total flux cleaned = -0.00210386 Jy ! Component: 3550 - total flux cleaned = -0.00208751 Jy ! Component: 3600 - total flux cleaned = -0.00208763 Jy ! Component: 3650 - total flux cleaned = -0.00213564 Jy ! Component: 3700 - total flux cleaned = -0.00213563 Jy ! Component: 3750 - total flux cleaned = -0.00219911 Jy ! Component: 3800 - total flux cleaned = -0.00221464 Jy ! Component: 3850 - total flux cleaned = -0.00218325 Jy ! Component: 3900 - total flux cleaned = -0.00219876 Jy ! Component: 3950 - total flux cleaned = -0.00224481 Jy ! Component: 4000 - total flux cleaned = -0.00221414 Jy ! Component: 4050 - total flux cleaned = -0.00225992 Jy ! Total flux subtracted in 4096 components = -0.00225983 Jy ! Clean residual min=-0.000927 max=0.000922 Jy/beam ! Clean residual mean=-0.000000 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 1.05938 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 401 components and 1.05938 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0958+4725_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8901 x 1.417 at 3.984 degrees (North through East) ! Clean map min=-0.00239 max=0.95143 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0958+4725_X_g_map.fits wmodel /image_prod/ug002_uva//J0958+4725_X_g_map.mod ! Writing 401 model components to file: /image_prod/ug002_uva//J0958+4725_X_g_map.mod wobs /image_prod/ug002_uva//J0958+4725_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0958+4725_X_g_uvs.fits wwins /image_prod/ug002_uva//J0958+4725_X_g_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0958+4725_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.951429 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244676 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0771501 0.0771501 0.1543 0.3086 0.6172 1.2344 2.4688 4.9376 9.87521 19.7504 39.5008 79.0017 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.951 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3888.53 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0958+4725_X_g_dfm.log closed on Wed Mar 4 23:17:43 2020