! Started logfile: /image_prod/ug002_uva//J0958+4725_S_a_dfm.log on Wed Mar  4 23:16:19 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0958+4725_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0958+4725_S_a_uva.fits
! AN table 1: 17 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.772876 visibilities/baseline/integration-bin.
! Found source: J0958+4725
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1419 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0958+4725_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.449847Jy  sigma=8.744402
! Fit after  self-cal, rms=0.163544Jy  sigma=1.152134
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.528 mas, bmaj=5.997 mas, bpa=-24.35 degrees
! Estimated noise=3.79663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.754845 Jy
! Component: 100  -  total flux cleaned = 0.91994 Jy
! Total flux subtracted in 100 components = 0.91994 Jy
! Clean residual min=-0.036783 max=0.049227 Jy/beam
! Clean residual mean=-0.000156 rms=0.009317 Jy/beam
! Combined flux in latest and established models = 0.91994 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.91994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.175171Jy  sigma=1.114273
! Fit after  self-cal, rms=0.175161Jy  sigma=1.114223
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.068 mas, bmaj=6.474 mas, bpa=-27.24 degrees
! Estimated noise=3.21068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.053732 Jy
! Component: 100  -  total flux cleaned = 0.0824069 Jy
! Component: 150  -  total flux cleaned = 0.0924945 Jy
! Component: 200  -  total flux cleaned = 0.0952452 Jy
! Total flux subtracted in 200 components = 0.0952452 Jy
! Clean residual min=-0.037346 max=0.030256 Jy/beam
! Clean residual mean=-0.000017 rms=0.008137 Jy/beam
! Combined flux in latest and established models = 1.01519 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 28 components and 1.01518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.155315Jy  sigma=1.034817
! Fit after  self-cal, rms=0.155245Jy  sigma=1.034477
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.068 x 6.474 at -27.24 degrees (North through East)
! Clean map  min=-0.033277  max=0.95774 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        0.94     KP        0.99     
!   LA        1.03     MK        1.00     NL        0.89     OV        1.01     
!   PT        1.02     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.12     KP        1.01     
!   LA        1.01     MK        0.99     NL        0.83     OV        1.31     
!   PT        1.03     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        1.15     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.91     OV        1.00     
!   PT        1.00     
! 
! 
! Fit before self-cal, rms=0.155245Jy  sigma=1.034477
! Fit after  self-cal, rms=0.142525Jy  sigma=0.789451
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.113 mas, bmaj=6.502 mas, bpa=-27.34 degrees
! Estimated noise=3.24902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00115365 Jy
! Component: 100  -  total flux cleaned = 0.000122515 Jy
! Component: 150  -  total flux cleaned = 0.00123844 Jy
! Component: 200  -  total flux cleaned = 0.00190767 Jy
! Total flux subtracted in 200 components = 0.00190767 Jy
! Clean residual min=-0.023262 max=0.019878 Jy/beam
! Clean residual mean=0.000016 rms=0.005575 Jy/beam
! Combined flux in latest and established models = 1.01709 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 34 components and 1.01709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.140225Jy  sigma=0.776811
! Fit after  self-cal, rms=0.140172Jy  sigma=0.776543
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.140172Jy  sigma=0.776543
! Fit after  self-cal, rms=0.069352Jy  sigma=0.369582
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.111 mas, bmaj=6.558 mas, bpa=-26.72 degrees
! Estimated noise=3.24481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00154671 Jy
! Component: 100  -  total flux cleaned = -0.00212889 Jy
! Component: 150  -  total flux cleaned = -0.00277899 Jy
! Component: 200  -  total flux cleaned = -0.00320569 Jy
! Total flux subtracted in 200 components = -0.00320569 Jy
! Clean residual min=-0.006606 max=0.007336 Jy/beam
! Clean residual mean=0.000014 rms=0.001693 Jy/beam
! Combined flux in latest and established models = 1.01389 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 1.01389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068412Jy  sigma=0.363760
! Fit after  self-cal, rms=0.068373Jy  sigma=0.363518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-62, 119.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336937 Jy
! Component: 100  -  total flux cleaned = 0.00280872 Jy
! Component: 150  -  total flux cleaned = 0.00245591 Jy
! Component: 200  -  total flux cleaned = 0.00191357 Jy
! Total flux subtracted in 200 components = 0.00191357 Jy
! Clean residual min=-0.006307 max=0.005982 Jy/beam
! Clean residual mean=0.000013 rms=0.001568 Jy/beam
! Combined flux in latest and established models = 1.0158 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 63 components and 1.0158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067602Jy  sigma=0.358868
! Fit after  self-cal, rms=0.067562Jy  sigma=0.358691
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067562Jy  sigma=0.358691
! Fit after  self-cal, rms=0.067547Jy  sigma=0.357108
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.11 mas, bmaj=6.566 mas, bpa=-26.54 degrees
! Estimated noise=3.24553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000827041 Jy
! Component: 100  -  total flux cleaned = -0.000943988 Jy
! Component: 150  -  total flux cleaned = -0.00106156 Jy
! Component: 200  -  total flux cleaned = -0.00148782 Jy
! Total flux subtracted in 200 components = -0.00148782 Jy
! Clean residual min=-0.005559 max=0.006059 Jy/beam
! Clean residual mean=0.000010 rms=0.001433 Jy/beam
! Combined flux in latest and established models = 1.01431 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 67 components and 1.01431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067088Jy  sigma=0.354168
! Fit after  self-cal, rms=0.067075Jy  sigma=0.354127
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.5, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00337886 Jy
! Component: 100  -  total flux cleaned = 0.00286314 Jy
! Component: 150  -  total flux cleaned = 0.0022846 Jy
! Component: 200  -  total flux cleaned = 0.00186996 Jy
! Total flux subtracted in 200 components = 0.00186996 Jy
! Clean residual min=-0.004960 max=0.005061 Jy/beam
! Clean residual mean=0.000011 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 1.01618 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 1.01618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066477Jy  sigma=0.350489
! Fit after  self-cal, rms=0.066446Jy  sigma=0.350312
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066446Jy  sigma=0.350312
! Fit after  self-cal, rms=0.066396Jy  sigma=0.349288
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.442 mas, bmaj=9.425 mas, bpa=-11.64 degrees
! Estimated noise=3.90462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00158385 Jy
! Component: 100  -  total flux cleaned = -0.0017821 Jy
! Component: 150  -  total flux cleaned = -0.00194309 Jy
! Component: 200  -  total flux cleaned = -0.00208706 Jy
! Total flux subtracted in 200 components = -0.00208706 Jy
! Clean residual min=-0.005336 max=0.004786 Jy/beam
! Clean residual mean=0.000014 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 1.0141 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 1.0141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066223Jy  sigma=0.348086
! Fit after  self-cal, rms=0.066211Jy  sigma=0.348033
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000347098 Jy
! Component: 100  -  total flux cleaned = -0.000408417 Jy
! Component: 150  -  total flux cleaned = -0.000518603 Jy
! Component: 200  -  total flux cleaned = -0.000619088 Jy
! Total flux subtracted in 200 components = -0.000619088 Jy
! Clean residual min=-0.005342 max=0.004472 Jy/beam
! Clean residual mean=0.000015 rms=0.001428 Jy/beam
! Combined flux in latest and established models = 1.01348 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 110 components and 1.01348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066148Jy  sigma=0.347611
! Fit after  self-cal, rms=0.066140Jy  sigma=0.347591
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.108 mas, bmaj=6.569 mas, bpa=-26.48 degrees
! Estimated noise=3.24483 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.108 x 6.569 at -26.48 degrees (North through East)
! Clean map  min=-0.0043356  max=0.96319 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066140Jy  sigma=0.347591
! Fit after  self-cal, rms=0.054124Jy  sigma=0.288706
! Inverting map and beam 
! Estimated beam: bmin=4.107 mas, bmaj=6.57 mas, bpa=-26.49 degrees
! Estimated noise=3.24433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000583152 Jy
! Component: 100  -  total flux cleaned = 0.000899335 Jy
! Component: 150  -  total flux cleaned = 0.000897655 Jy
! Component: 200  -  total flux cleaned = 0.000895994 Jy
! Total flux subtracted in 200 components = 0.000895994 Jy
! Clean residual min=-0.004158 max=0.004854 Jy/beam
! Clean residual mean=0.000010 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 1.01437 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 125 components and 1.01437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053777Jy  sigma=0.286562
! Fit after  self-cal, rms=0.053771Jy  sigma=0.286522
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000274232 Jy
! Component: 100  -  total flux cleaned = 0.000191949 Jy
! Component: 150  -  total flux cleaned = 0.000189673 Jy
! Component: 200  -  total flux cleaned = 4.62746e-05 Jy
! Total flux subtracted in 200 components = 4.62746e-05 Jy
! Clean residual min=-0.004162 max=0.004552 Jy/beam
! Clean residual mean=0.000010 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 1.01442 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 132 components and 1.01442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053577Jy  sigma=0.285329
! Fit after  self-cal, rms=0.053574Jy  sigma=0.285310
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053574Jy  sigma=0.285310
! Fit after  self-cal, rms=0.053508Jy  sigma=0.284920
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.551 mas, bmaj=6.076 mas, bpa=-24.12 degrees
! Estimated noise=3.80073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.751737 Jy
! Component: 100  -  total flux cleaned = 0.915704 Jy
! Component: 150  -  total flux cleaned = 0.959459 Jy
! Component: 200  -  total flux cleaned = 0.981664 Jy
! Total flux subtracted in 200 components = 0.981664 Jy
! Clean residual min=-0.007974 max=0.010980 Jy/beam
! Clean residual mean=-0.000030 rms=0.002097 Jy/beam
! Combined flux in latest and established models = 0.981664 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.981664 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.105 mas, bmaj=6.572 mas, bpa=-26.44 degrees
! Estimated noise=3.2443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147696 Jy
! Component: 100  -  total flux cleaned = 0.0240496 Jy
! Component: 150  -  total flux cleaned = 0.0306246 Jy
! Component: 200  -  total flux cleaned = 0.0330703 Jy
! Total flux subtracted in 200 components = 0.0330703 Jy
! Clean residual min=-0.004745 max=0.005935 Jy/beam
! Clean residual mean=0.000006 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 1.01473 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 47 components and 1.01473 Jy
! Inverting map 
! Added new window around map position (-21.5, -45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398126 Jy
! Component: 100  -  total flux cleaned = 0.00460405 Jy
! Component: 150  -  total flux cleaned = 0.00488065 Jy
! Component: 200  -  total flux cleaned = 0.00501683 Jy
! Total flux subtracted in 200 components = 0.00501683 Jy
! Clean residual min=-0.004336 max=0.004527 Jy/beam
! Clean residual mean=0.000012 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 1.01975 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 64 components and 1.01975 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.434 mas, bmaj=9.439 mas, bpa=-11.08 degrees
! Estimated noise=3.905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177196 Jy
! Component: 100  -  total flux cleaned = -0.000469113 Jy
! Component: 150  -  total flux cleaned = -0.000858219 Jy
! Component: 200  -  total flux cleaned = -0.000927484 Jy
! Total flux subtracted in 200 components = -0.000927484 Jy
! Clean residual min=-0.004980 max=0.004362 Jy/beam
! Clean residual mean=0.000021 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 1.01882 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000193361 Jy
! Component: 100  -  total flux cleaned = -0.00031196 Jy
! Component: 150  -  total flux cleaned = -0.000421821 Jy
! Component: 200  -  total flux cleaned = -0.000474251 Jy
! Total flux subtracted in 200 components = -0.000474251 Jy
! Clean residual min=-0.004917 max=0.004099 Jy/beam
! Clean residual mean=0.000020 rms=0.001277 Jy/beam
! Combined flux in latest and established models = 1.01835 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 98 components and 1.01835 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.105 mas, bmaj=6.572 mas, bpa=-26.44 degrees
! Estimated noise=3.2443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000869424 Jy
! Component: 100  -  total flux cleaned = -0.000564833 Jy
! Component: 150  -  total flux cleaned = -0.000565412 Jy
! Component: 200  -  total flux cleaned = -0.000480475 Jy
! Total flux subtracted in 200 components = -0.000480475 Jy
! Clean residual min=-0.004071 max=0.004147 Jy/beam
! Clean residual mean=0.000014 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 1.01787 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 120 components and 1.01787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053442Jy  sigma=0.284059
! Fit after  self-cal, rms=0.053332Jy  sigma=0.283617
wmodel J0958+4725_S_a_map.mod
! Writing 120 model components to file: J0958+4725_S_a_map.mod
wobs   J0958+4725_S_a_uvs.fits
! Writing UV FITS file: J0958+4725_S_a_uvs.fits
wwins  J0958+4725_S_a_map.win
! wwins: Wrote 4 windows to J0958+4725_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.93439e-06 Jy
! Component: 100  -  total flux cleaned = -0.000137669 Jy
! Component: 150  -  total flux cleaned = 6.58612e-05 Jy
! Component: 200  -  total flux cleaned = 0.000260365 Jy
! Component: 250  -  total flux cleaned = 0.000446681 Jy
! Component: 300  -  total flux cleaned = 0.000568339 Jy
! Component: 350  -  total flux cleaned = 0.000688038 Jy
! Component: 400  -  total flux cleaned = 0.000861267 Jy
! Component: 450  -  total flux cleaned = 0.000917514 Jy
! Component: 500  -  total flux cleaned = 0.0009177 Jy
! Component: 550  -  total flux cleaned = 0.000919399 Jy
! Component: 600  -  total flux cleaned = 0.00117598 Jy
! Component: 650  -  total flux cleaned = 0.00122601 Jy
! Component: 700  -  total flux cleaned = 0.00142213 Jy
! Component: 750  -  total flux cleaned = 0.00156458 Jy
! Component: 800  -  total flux cleaned = 0.00175145 Jy
! Component: 850  -  total flux cleaned = 0.00174991 Jy
! Component: 900  -  total flux cleaned = 0.00188547 Jy
! Component: 950  -  total flux cleaned = 0.00197524 Jy
! Component: 1000  -  total flux cleaned = 0.00206284 Jy
! Component: 1050  -  total flux cleaned = 0.00223221 Jy
! Component: 1100  -  total flux cleaned = 0.00235823 Jy
! Component: 1150  -  total flux cleaned = 0.00252253 Jy
! Component: 1200  -  total flux cleaned = 0.00268362 Jy
! Component: 1250  -  total flux cleaned = 0.00268464 Jy
! Component: 1300  -  total flux cleaned = 0.00288 Jy
! Component: 1350  -  total flux cleaned = 0.0029561 Jy
! Component: 1400  -  total flux cleaned = 0.00288129 Jy
! Component: 1450  -  total flux cleaned = 0.00299275 Jy
! Component: 1500  -  total flux cleaned = 0.00313759 Jy
! Component: 1550  -  total flux cleaned = 0.00306598 Jy
! Component: 1600  -  total flux cleaned = 0.00317321 Jy
! Component: 1650  -  total flux cleaned = 0.00334743 Jy
! Component: 1700  -  total flux cleaned = 0.00341647 Jy
! Component: 1750  -  total flux cleaned = 0.00345073 Jy
! Component: 1800  -  total flux cleaned = 0.0036839 Jy
! Component: 1850  -  total flux cleaned = 0.00374912 Jy
! Component: 1900  -  total flux cleaned = 0.00374937 Jy
! Component: 1950  -  total flux cleaned = 0.00387758 Jy
! Component: 2000  -  total flux cleaned = 0.00387718 Jy
! Component: 2050  -  total flux cleaned = 0.00387689 Jy
! Component: 2100  -  total flux cleaned = 0.00390723 Jy
! Component: 2150  -  total flux cleaned = 0.00393757 Jy
! Component: 2200  -  total flux cleaned = 0.00384774 Jy
! Component: 2250  -  total flux cleaned = 0.00375962 Jy
! Component: 2300  -  total flux cleaned = 0.00373058 Jy
! Component: 2350  -  total flux cleaned = 0.00375895 Jy
! Component: 2400  -  total flux cleaned = 0.00364516 Jy
! Component: 2450  -  total flux cleaned = 0.00361732 Jy
! Component: 2500  -  total flux cleaned = 0.00353456 Jy
! Component: 2550  -  total flux cleaned = 0.00358977 Jy
! Component: 2600  -  total flux cleaned = 0.00345369 Jy
! Component: 2650  -  total flux cleaned = 0.00353444 Jy
! Component: 2700  -  total flux cleaned = 0.00345433 Jy
! Component: 2750  -  total flux cleaned = 0.00342822 Jy
! Component: 2800  -  total flux cleaned = 0.00337585 Jy
! Component: 2850  -  total flux cleaned = 0.0032724 Jy
! Component: 2900  -  total flux cleaned = 0.00319628 Jy
! Component: 2950  -  total flux cleaned = 0.00314579 Jy
! Component: 3000  -  total flux cleaned = 0.00312064 Jy
! Component: 3050  -  total flux cleaned = 0.00307137 Jy
! Component: 3100  -  total flux cleaned = 0.00309583 Jy
! Component: 3150  -  total flux cleaned = 0.00302317 Jy
! Component: 3200  -  total flux cleaned = 0.00311899 Jy
! Component: 3250  -  total flux cleaned = 0.00309459 Jy
! Component: 3300  -  total flux cleaned = 0.0030241 Jy
! Component: 3350  -  total flux cleaned = 0.00300103 Jy
! Component: 3400  -  total flux cleaned = 0.00302375 Jy
! Component: 3450  -  total flux cleaned = 0.00302385 Jy
! Component: 3500  -  total flux cleaned = 0.00304619 Jy
! Component: 3550  -  total flux cleaned = 0.00297916 Jy
! Component: 3600  -  total flux cleaned = 0.002935 Jy
! Component: 3650  -  total flux cleaned = 0.00293507 Jy
! Component: 3700  -  total flux cleaned = 0.00297859 Jy
! Component: 3750  -  total flux cleaned = 0.00302132 Jy
! Component: 3800  -  total flux cleaned = 0.00293591 Jy
! Component: 3850  -  total flux cleaned = 0.00295711 Jy
! Component: 3900  -  total flux cleaned = 0.00295689 Jy
! Component: 3950  -  total flux cleaned = 0.00287389 Jy
! Component: 4000  -  total flux cleaned = 0.00295582 Jy
! Component: 4050  -  total flux cleaned = 0.00293532 Jy
! Total flux subtracted in 4096 components = 0.00293528 Jy
! Clean residual min=-0.001200 max=0.001033 Jy/beam
! Clean residual mean=0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 1.0208 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 406 components and 1.0208 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0958+4725_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.105 x 6.572 at -26.44 degrees (North through East)
! Clean map  min=-0.0026477  max=0.96323 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0958+4725_S_a_map.fits
wmodel /image_prod/ug002_uva//J0958+4725_S_a_map.mod
! Writing 406 model components to file: /image_prod/ug002_uva//J0958+4725_S_a_map.mod
wobs   /image_prod/ug002_uva//J0958+4725_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0958+4725_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J0958+4725_S_a_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0958+4725_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.96323 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000375868 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.117065 0.117065 0.23413 0.46826 0.936519 1.87304 3.74608 7.49216 14.9843 29.9686 59.9372
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.963 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2562.68 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0958+4725_S_a_dfm.log closed on Wed Mar  4 23:16:22 2020