! Started logfile: /image_prod/ug002_uva//J0954+7435_X_dfm.log on Wed Mar 4 23:15:03 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0954+7435_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0954+7435_X_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.928889 visibilities/baseline/integration-bin. ! Found source: J0954+7435 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 40128 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0954+7435_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.016182Jy sigma=8.381517 ! Fit after self-cal, rms=0.859124Jy sigma=7.037160 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=1.058 mas, bpa=-84.12 degrees ! Estimated noise=0.874321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0940465 Jy ! Component: 100 - total flux cleaned = 0.131234 Jy ! Total flux subtracted in 100 components = 0.131234 Jy ! Clean residual min=-0.007668 max=0.018800 Jy/beam ! Clean residual mean=0.000021 rms=0.002021 Jy/beam ! Combined flux in latest and established models = 0.131234 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.131234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100809Jy sigma=0.810256 ! Fit after self-cal, rms=0.100646Jy sigma=0.809160 ! Inverting map ! Added new window around map position (-1, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231193 Jy ! Component: 100 - total flux cleaned = 0.0381309 Jy ! Total flux subtracted in 100 components = 0.0381309 Jy ! Clean residual min=-0.005893 max=0.014734 Jy/beam ! Clean residual mean=0.000021 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.169364 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.169364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089484Jy sigma=0.710062 ! Fit after self-cal, rms=0.089374Jy sigma=0.709364 ! Inverting map ! Added new window around map position (-19.2, -8.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148951 Jy ! Component: 100 - total flux cleaned = 0.0259379 Jy ! Total flux subtracted in 100 components = 0.0259379 Jy ! Clean residual min=-0.005606 max=0.010949 Jy/beam ! Clean residual mean=0.000018 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.195302 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.195302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083285Jy sigma=0.656704 ! Fit after self-cal, rms=0.083086Jy sigma=0.655234 ! Inverting map ! Added new window around map position (-20.4, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113726 Jy ! Component: 100 - total flux cleaned = 0.020249 Jy ! Total flux subtracted in 100 components = 0.020249 Jy ! Clean residual min=-0.005152 max=0.008335 Jy/beam ! Clean residual mean=0.000017 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.215551 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.215551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079064Jy sigma=0.619849 ! Fit after self-cal, rms=0.078943Jy sigma=0.618891 ! Inverting map ! Added new window around map position (1.4, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088527 Jy ! Component: 100 - total flux cleaned = 0.0161953 Jy ! Total flux subtracted in 100 components = 0.0161953 Jy ! Clean residual min=-0.004678 max=0.007186 Jy/beam ! Clean residual mean=0.000017 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.231747 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.231747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076179Jy sigma=0.594658 ! Fit after self-cal, rms=0.076139Jy sigma=0.594304 ! Inverting map ! Added new window around map position (-21.2, -8.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0076496 Jy ! Component: 100 - total flux cleaned = 0.0138248 Jy ! Total flux subtracted in 100 components = 0.0138248 Jy ! Clean residual min=-0.004394 max=0.005602 Jy/beam ! Clean residual mean=0.000016 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.245572 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 92 components and 0.245572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074043Jy sigma=0.575662 ! Fit after self-cal, rms=0.074000Jy sigma=0.575286 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=1.333 mas, bpa=-82.21 degrees ! Estimated noise=0.435195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155079 Jy ! Component: 100 - total flux cleaned = 0.0280376 Jy ! Component: 150 - total flux cleaned = 0.0385937 Jy ! Component: 200 - total flux cleaned = 0.0475898 Jy ! Total flux subtracted in 200 components = 0.0475898 Jy ! Clean residual min=-0.005319 max=0.008235 Jy/beam ! Clean residual mean=0.000027 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.293161 Jy ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 179 components and 0.293161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068422Jy sigma=0.528998 ! Fit after self-cal, rms=0.068268Jy sigma=0.527274 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.028 x 1.333 at -82.21 degrees (North through East) ! Clean map min=-0.0051564 max=0.13536 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.96 KP 0.98 ! LA 0.91 MK 1.06 NL 1.25 OV 0.98 ! PT 0.83 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 0.96 KP 0.98 ! LA 0.92 MK 1.05 NL 1.23 OV 0.98 ! PT 0.82 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 0.97 KP 0.99 ! LA 0.93 MK 1.02 NL 1.27 OV 1.00 ! PT 0.84 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.93 KP 0.98 ! LA 0.92 MK 1.05 NL 1.25 OV 0.99 ! PT 0.82 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 0.98 KP 0.99 ! LA 0.93 MK 1.04 NL 1.26 OV 0.99 ! PT 0.84 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.99 KP 0.99 ! LA 0.94 MK 1.04 NL 1.27 OV 0.98 ! PT 0.84 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.98 KP 1.01 ! LA 0.95 MK 1.06 NL 1.28 OV 0.99 ! PT 0.84 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.01 KP 0.98 ! LA 0.95 MK 1.03 NL 1.28 OV 0.99 ! PT 0.84 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.97 KP 1.00 ! LA 0.94 MK 1.04 NL 1.28 OV 1.02 ! PT 0.85 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.98 KP 0.99 ! LA 0.95 MK 1.03 NL 1.30 OV 1.02 ! PT 0.85 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.02 KP 1.00 ! LA 0.96 MK 1.05 NL 1.31 OV 1.04 ! PT 0.85 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.97 KP 1.00 ! LA 0.94 MK 1.04 NL 1.31 OV 1.04 ! PT 0.83 SC 1.03 ! ! ! Fit before self-cal, rms=0.068268Jy sigma=0.527274 ! Fit after self-cal, rms=0.062838Jy sigma=0.487090 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=1.344 mas, bpa=-82.1 degrees ! Estimated noise=0.422206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.6, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560876 Jy ! Component: 100 - total flux cleaned = 0.00899362 Jy ! Component: 150 - total flux cleaned = 0.0111265 Jy ! Component: 200 - total flux cleaned = 0.0124907 Jy ! Total flux subtracted in 200 components = 0.0124907 Jy ! Clean residual min=-0.002461 max=0.003199 Jy/beam ! Clean residual mean=0.000012 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.305652 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 233 components and 0.305652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062197Jy sigma=0.479514 ! Fit after self-cal, rms=0.062225Jy sigma=0.478954 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062225Jy sigma=0.478954 ! Fit after self-cal, rms=0.064445Jy sigma=0.471810 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.037 mas, bmaj=1.344 mas, bpa=-82.34 degrees ! Estimated noise=0.424079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260109 Jy ! Component: 100 - total flux cleaned = 0.00381461 Jy ! Component: 150 - total flux cleaned = 0.00464248 Jy ! Component: 200 - total flux cleaned = 0.00527674 Jy ! Total flux subtracted in 200 components = 0.00527674 Jy ! Clean residual min=-0.001829 max=0.002396 Jy/beam ! Clean residual mean=0.000005 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.310929 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 252 components and 0.310929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064212Jy sigma=0.468852 ! Fit after self-cal, rms=0.064228Jy sigma=0.468592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.2, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227499 Jy ! Component: 100 - total flux cleaned = 0.00299378 Jy ! Component: 150 - total flux cleaned = 0.00342026 Jy ! Component: 200 - total flux cleaned = 0.00374731 Jy ! Total flux subtracted in 200 components = 0.00374731 Jy ! Clean residual min=-0.001734 max=0.002051 Jy/beam ! Clean residual mean=0.000004 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.314676 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 278 components and 0.314676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064103Jy sigma=0.467085 ! Fit after self-cal, rms=0.064092Jy sigma=0.467005 ! Inverting map ! Added new window around map position (-16.8, -12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188822 Jy ! Component: 100 - total flux cleaned = 0.0028054 Jy ! Component: 150 - total flux cleaned = 0.00336584 Jy ! Component: 200 - total flux cleaned = 0.00383524 Jy ! Total flux subtracted in 200 components = 0.00383524 Jy ! Clean residual min=-0.001656 max=0.001722 Jy/beam ! Clean residual mean=0.000003 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.318512 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 295 components and 0.318512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064009Jy sigma=0.465997 ! Fit after self-cal, rms=0.064002Jy sigma=0.465969 ! Inverting map ! Added new window around map position (-26, -9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119498 Jy ! Component: 100 - total flux cleaned = 0.00160238 Jy ! Component: 150 - total flux cleaned = 0.00198008 Jy ! Component: 200 - total flux cleaned = 0.00233223 Jy ! Total flux subtracted in 200 components = 0.00233223 Jy ! Clean residual min=-0.001579 max=0.001521 Jy/beam ! Clean residual mean=0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.320844 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 310 components and 0.320844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063943Jy sigma=0.465339 ! Fit after self-cal, rms=0.063938Jy sigma=0.465317 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063938Jy sigma=0.465317 ! Fit after self-cal, rms=0.064231Jy sigma=0.464665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.034 mas, bmaj=1.346 mas, bpa=-82.3 degrees ! Estimated noise=0.422775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059394 Jy ! Component: 100 - total flux cleaned = 0.00118213 Jy ! Component: 150 - total flux cleaned = 0.00183858 Jy ! Component: 200 - total flux cleaned = 0.00239621 Jy ! Total flux subtracted in 200 components = 0.00239621 Jy ! Clean residual min=-0.001327 max=0.001603 Jy/beam ! Clean residual mean=0.000003 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.32324 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 323 components and 0.32324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064176Jy sigma=0.464001 ! Fit after self-cal, rms=0.064176Jy sigma=0.463967 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102248 Jy ! Component: 100 - total flux cleaned = 0.00142582 Jy ! Component: 150 - total flux cleaned = 0.00175518 Jy ! Component: 200 - total flux cleaned = 0.00202778 Jy ! Total flux subtracted in 200 components = 0.00202778 Jy ! Clean residual min=-0.001239 max=0.001198 Jy/beam ! Clean residual mean=0.000003 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.325268 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 341 components and 0.325268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064126Jy sigma=0.463464 ! Fit after self-cal, rms=0.064120Jy sigma=0.463442 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064120Jy sigma=0.463442 ! Fit after self-cal, rms=0.064093Jy sigma=0.463353 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=2.738 mas, bpa=-83.47 degrees ! Estimated noise=0.527273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158792 Jy ! Component: 100 - total flux cleaned = 0.00249571 Jy ! Component: 150 - total flux cleaned = 0.00317886 Jy ! Component: 200 - total flux cleaned = 0.00377108 Jy ! Total flux subtracted in 200 components = 0.00377108 Jy ! Clean residual min=-0.001382 max=0.001725 Jy/beam ! Clean residual mean=0.000004 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.329039 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 363 components and 0.329039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064070Jy sigma=0.462994 ! Fit after self-cal, rms=0.064066Jy sigma=0.462961 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (45.2, 35.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153431 Jy ! Component: 100 - total flux cleaned = 0.0021172 Jy ! Component: 150 - total flux cleaned = 0.0023855 Jy ! Component: 200 - total flux cleaned = 0.00266128 Jy ! Total flux subtracted in 200 components = 0.00266128 Jy ! Clean residual min=-0.001336 max=0.001365 Jy/beam ! Clean residual mean=0.000003 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.3317 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 390 components and 0.3317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064047Jy sigma=0.462698 ! Fit after self-cal, rms=0.064045Jy sigma=0.462678 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=1.345 mas, bpa=-82.24 degrees ! Estimated noise=0.421832 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.033 x 1.345 at -82.24 degrees (North through East) ! Clean map min=-0.00099912 max=0.13054 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7817 mas, bmaj=1.067 mas, bpa=-83.95 degrees ! Estimated noise=0.852044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912434 Jy ! Component: 100 - total flux cleaned = 0.127716 Jy ! Component: 150 - total flux cleaned = 0.151034 Jy ! Component: 200 - total flux cleaned = 0.168897 Jy ! Total flux subtracted in 200 components = 0.168897 Jy ! Clean residual min=-0.004665 max=0.010702 Jy/beam ! Clean residual mean=0.000017 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.168897 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.168897 Jy ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=1.345 mas, bpa=-82.24 degrees ! Estimated noise=0.421832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029508 Jy ! Component: 100 - total flux cleaned = 0.0508799 Jy ! Component: 150 - total flux cleaned = 0.0670394 Jy ! Component: 200 - total flux cleaned = 0.0796888 Jy ! Total flux subtracted in 200 components = 0.0796888 Jy ! Clean residual min=-0.003492 max=0.007541 Jy/beam ! Clean residual mean=0.000024 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.248586 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 106 components and 0.248586 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101984 Jy ! Component: 100 - total flux cleaned = 0.0186041 Jy ! Component: 150 - total flux cleaned = 0.0256623 Jy ! Component: 200 - total flux cleaned = 0.031653 Jy ! Total flux subtracted in 200 components = 0.031653 Jy ! Clean residual min=-0.002270 max=0.003775 Jy/beam ! Clean residual mean=0.000015 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.280239 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 173 components and 0.280239 Jy ! Inverting map ! Added new window around map position (-18, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516809 Jy ! Component: 100 - total flux cleaned = 0.00966637 Jy ! Component: 150 - total flux cleaned = 0.0136037 Jy ! Component: 200 - total flux cleaned = 0.0170943 Jy ! Total flux subtracted in 200 components = 0.0170943 Jy ! Clean residual min=-0.001703 max=0.002439 Jy/beam ! Clean residual mean=0.000010 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.297333 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 221 components and 0.297333 Jy ! Inverting map ! Added new window around map position (-20.6, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315289 Jy ! Component: 100 - total flux cleaned = 0.00596499 Jy ! Component: 150 - total flux cleaned = 0.00849983 Jy ! Component: 200 - total flux cleaned = 0.0107945 Jy ! Total flux subtracted in 200 components = 0.0107945 Jy ! Clean residual min=-0.001510 max=0.001666 Jy/beam ! Clean residual mean=0.000007 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.308128 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 264 components and 0.308128 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=2.738 mas, bpa=-83.47 degrees ! Estimated noise=0.527273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408542 Jy ! Component: 100 - total flux cleaned = 0.00731257 Jy ! Component: 150 - total flux cleaned = 0.00996787 Jy ! Component: 200 - total flux cleaned = 0.012233 Jy ! Total flux subtracted in 200 components = 0.012233 Jy ! Clean residual min=-0.001550 max=0.001774 Jy/beam ! Clean residual mean=0.000008 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.320361 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194855 Jy ! Component: 100 - total flux cleaned = 0.00363152 Jy ! Component: 150 - total flux cleaned = 0.0050921 Jy ! Component: 200 - total flux cleaned = 0.00637179 Jy ! Total flux subtracted in 200 components = 0.00637179 Jy ! Clean residual min=-0.001293 max=0.001336 Jy/beam ! Clean residual mean=0.000005 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.326732 Jy ! Adding 142 model components to the UV plane model. ! The established model now contains 375 components and 0.326732 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=1.345 mas, bpa=-82.24 degrees ! Estimated noise=0.421832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100705 Jy ! Component: 100 - total flux cleaned = 0.00164643 Jy ! Component: 150 - total flux cleaned = 0.00219904 Jy ! Component: 200 - total flux cleaned = 0.00271242 Jy ! Total flux subtracted in 200 components = 0.00271242 Jy ! Clean residual min=-0.001101 max=0.001014 Jy/beam ! Clean residual mean=0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.329445 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 409 components and 0.329445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064013Jy sigma=0.462326 ! Fit after self-cal, rms=0.063980Jy sigma=0.462157 wmodel J0954+7435_X_map.mod ! Writing 409 model components to file: J0954+7435_X_map.mod wobs J0954+7435_X_uvs.fits ! Writing UV FITS file: J0954+7435_X_uvs.fits wwins J0954+7435_X_map.win ! wwins: Wrote 15 windows to J0954+7435_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039294 Jy ! Component: 100 - total flux cleaned = -0.000594921 Jy ! Component: 150 - total flux cleaned = -0.000700452 Jy ! Component: 200 - total flux cleaned = -0.000819661 Jy ! Component: 250 - total flux cleaned = -0.000969304 Jy ! Component: 300 - total flux cleaned = -0.00113162 Jy ! Component: 350 - total flux cleaned = -0.00127433 Jy ! Component: 400 - total flux cleaned = -0.00139869 Jy ! Component: 450 - total flux cleaned = -0.00155136 Jy ! Component: 500 - total flux cleaned = -0.00170118 Jy ! Component: 550 - total flux cleaned = -0.00181885 Jy ! Component: 600 - total flux cleaned = -0.00189142 Jy ! Component: 650 - total flux cleaned = -0.00197727 Jy ! Component: 700 - total flux cleaned = -0.00203367 Jy ! Component: 750 - total flux cleaned = -0.00211694 Jy ! Component: 800 - total flux cleaned = -0.00210319 Jy ! Component: 850 - total flux cleaned = -0.00215749 Jy ! Component: 900 - total flux cleaned = -0.00211761 Jy ! Component: 950 - total flux cleaned = -0.00215741 Jy ! Component: 1000 - total flux cleaned = -0.00214438 Jy ! Component: 1050 - total flux cleaned = -0.00217025 Jy ! Component: 1100 - total flux cleaned = -0.00219584 Jy ! Component: 1150 - total flux cleaned = -0.00218301 Jy ! Component: 1200 - total flux cleaned = -0.00218318 Jy ! Component: 1250 - total flux cleaned = -0.00220831 Jy ! Component: 1300 - total flux cleaned = -0.00227004 Jy ! Component: 1350 - total flux cleaned = -0.00231892 Jy ! Component: 1400 - total flux cleaned = -0.00231876 Jy ! Component: 1450 - total flux cleaned = -0.00236664 Jy ! Component: 1500 - total flux cleaned = -0.00239048 Jy ! Component: 1550 - total flux cleaned = -0.00236691 Jy ! Component: 1600 - total flux cleaned = -0.00234375 Jy ! Component: 1650 - total flux cleaned = -0.00239019 Jy ! Component: 1700 - total flux cleaned = -0.00244776 Jy ! Component: 1750 - total flux cleaned = -0.00237935 Jy ! Component: 1800 - total flux cleaned = -0.00239074 Jy ! Component: 1850 - total flux cleaned = -0.00244668 Jy ! Component: 1900 - total flux cleaned = -0.00242451 Jy ! Component: 1950 - total flux cleaned = -0.00240253 Jy ! Component: 2000 - total flux cleaned = -0.00242446 Jy ! Component: 2050 - total flux cleaned = -0.00242442 Jy ! Component: 2100 - total flux cleaned = -0.00243506 Jy ! Component: 2150 - total flux cleaned = -0.00240297 Jy ! Component: 2200 - total flux cleaned = -0.00243467 Jy ! Component: 2250 - total flux cleaned = -0.00239257 Jy ! Component: 2300 - total flux cleaned = -0.00242391 Jy ! Component: 2350 - total flux cleaned = -0.00238251 Jy ! Component: 2400 - total flux cleaned = -0.00238258 Jy ! Component: 2450 - total flux cleaned = -0.00234164 Jy ! Component: 2500 - total flux cleaned = -0.00240267 Jy ! Component: 2550 - total flux cleaned = -0.00236218 Jy ! Component: 2600 - total flux cleaned = -0.00232221 Jy ! Component: 2650 - total flux cleaned = -0.00234223 Jy ! Component: 2700 - total flux cleaned = -0.00235218 Jy ! Component: 2750 - total flux cleaned = -0.00232258 Jy ! Component: 2800 - total flux cleaned = -0.00231277 Jy ! Component: 2850 - total flux cleaned = -0.00232247 Jy ! Component: 2900 - total flux cleaned = -0.00231277 Jy ! Component: 2950 - total flux cleaned = -0.00227418 Jy ! Component: 3000 - total flux cleaned = -0.00228383 Jy ! Component: 3050 - total flux cleaned = -0.0023029 Jy ! Component: 3100 - total flux cleaned = -0.00230297 Jy ! Component: 3150 - total flux cleaned = -0.00233125 Jy ! Component: 3200 - total flux cleaned = -0.00231249 Jy ! Component: 3250 - total flux cleaned = -0.00230318 Jy ! Component: 3300 - total flux cleaned = -0.00233103 Jy ! Component: 3350 - total flux cleaned = -0.00231258 Jy ! Component: 3400 - total flux cleaned = -0.00232172 Jy ! Component: 3450 - total flux cleaned = -0.00228523 Jy ! Component: 3500 - total flux cleaned = -0.00227609 Jy ! Component: 3550 - total flux cleaned = -0.00223989 Jy ! Component: 3600 - total flux cleaned = -0.00223992 Jy ! Component: 3650 - total flux cleaned = -0.00228469 Jy ! Component: 3700 - total flux cleaned = -0.00224905 Jy ! Component: 3750 - total flux cleaned = -0.00227568 Jy ! Component: 3800 - total flux cleaned = -0.00227563 Jy ! Component: 3850 - total flux cleaned = -0.00225799 Jy ! Component: 3900 - total flux cleaned = -0.0022492 Jy ! Component: 3950 - total flux cleaned = -0.00224052 Jy ! Component: 4000 - total flux cleaned = -0.00222317 Jy ! Component: 4050 - total flux cleaned = -0.00223182 Jy ! Total flux subtracted in 4096 components = -0.00227478 Jy ! Clean residual min=-0.000472 max=0.000548 Jy/beam ! Clean residual mean=0.000000 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.32717 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 750 components and 0.32717 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0954+7435_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.033 x 1.345 at -82.24 degrees (North through East) ! Clean map min=-0.00077766 max=0.13065 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0954+7435_X_map.fits wmodel /image_prod/ug002_uva//J0954+7435_X_map.mod ! Writing 750 model components to file: /image_prod/ug002_uva//J0954+7435_X_map.mod wobs /image_prod/ug002_uva//J0954+7435_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0954+7435_X_uvs.fits wwins /image_prod/ug002_uva//J0954+7435_X_map.win ! wwins: Wrote 16 windows to /image_prod/ug002_uva//J0954+7435_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.130646 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000147225 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.33807 0.33807 0.67614 1.35228 2.70456 5.40912 10.8182 21.6365 43.273 86.5459 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.13 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 887.389 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0954+7435_X_dfm.log closed on Wed Mar 4 23:15:10 2020