! Started logfile: /image_prod/ug002_uva//J0953-0840_S_b_dfm.log on Wed Mar 4 23:14:43 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0953-0840_S_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0953-0840_S_b_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0953-0840 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4200 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0953-0840_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.003342Jy sigma=8.908526 ! Fit after self-cal, rms=0.959957Jy sigma=8.524121 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=7.552 mas, bpa=-1.555 degrees ! Estimated noise=1.58577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032854 Jy ! Component: 100 - total flux cleaned = 0.0402471 Jy ! Total flux subtracted in 100 components = 0.0402471 Jy ! Clean residual min=-0.004250 max=0.003835 Jy/beam ! Clean residual mean=-0.000002 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.0402471 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0402471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061132Jy sigma=0.497523 ! Fit after self-cal, rms=0.059642Jy sigma=0.484355 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.603 mas, bpa=-2.519 degrees ! Estimated noise=1.25472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422927 Jy ! Component: 100 - total flux cleaned = 0.00575881 Jy ! Component: 150 - total flux cleaned = 0.00601205 Jy ! Component: 200 - total flux cleaned = 0.00620761 Jy ! Total flux subtracted in 200 components = 0.00620761 Jy ! Clean residual min=-0.003060 max=0.002753 Jy/beam ! Clean residual mean=-0.000003 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0464548 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0464548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059341Jy sigma=0.481824 ! Fit after self-cal, rms=0.059344Jy sigma=0.481679 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 8.603 at -2.519 degrees (North through East) ! Clean map min=-0.0033418 max=0.044341 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 1.02 LA 1.16 MK 1.07 ! NL 0.99 OV 1.01 PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 0.96 LA 1.04 MK 1.04 ! NL 0.69 OV 0.94 PT 1.10 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 1.07 LA 1.10 MK 1.02 ! NL 0.82 OV 0.98 PT 1.02 SC 0.94 ! ! ! Fit before self-cal, rms=0.059344Jy sigma=0.481679 ! Fit after self-cal, rms=0.056138Jy sigma=0.478360 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.533 mas, bpa=-2.428 degrees ! Estimated noise=1.23689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.91512e-05 Jy ! Component: 100 - total flux cleaned = -5.37811e-05 Jy ! Component: 150 - total flux cleaned = -5.36785e-05 Jy ! Component: 200 - total flux cleaned = -5.42757e-05 Jy ! Total flux subtracted in 200 components = -5.42757e-05 Jy ! Clean residual min=-0.002302 max=0.002399 Jy/beam ! Clean residual mean=-0.000003 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0464005 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.0464005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056113Jy sigma=0.478173 ! Fit after self-cal, rms=0.056185Jy sigma=0.477457 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056185Jy sigma=0.477457 ! Fit after self-cal, rms=0.055709Jy sigma=0.476625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.458 mas, bpa=-2.424 degrees ! Estimated noise=1.23145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148034 Jy ! Component: 100 - total flux cleaned = 5.00082e-05 Jy ! Component: 150 - total flux cleaned = 3.56788e-05 Jy ! Component: 200 - total flux cleaned = 3.60282e-05 Jy ! Total flux subtracted in 200 components = 3.60282e-05 Jy ! Clean residual min=-0.002342 max=0.002393 Jy/beam ! Clean residual mean=-0.000002 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0464365 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0464365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055694Jy sigma=0.476530 ! Fit after self-cal, rms=0.055748Jy sigma=0.476152 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.91442e-05 Jy ! Component: 100 - total flux cleaned = -0.000117933 Jy ! Component: 150 - total flux cleaned = -0.000131714 Jy ! Component: 200 - total flux cleaned = -0.000143706 Jy ! Total flux subtracted in 200 components = -0.000143706 Jy ! Clean residual min=-0.002348 max=0.002357 Jy/beam ! Clean residual mean=-0.000002 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0462928 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.0462928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055736Jy sigma=0.476069 ! Fit after self-cal, rms=0.055732Jy sigma=0.476039 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055732Jy sigma=0.476039 ! Fit after self-cal, rms=0.055711Jy sigma=0.475958 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=8.412 mas, bpa=-2.28 degrees ! Estimated noise=1.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295379 Jy ! Component: 100 - total flux cleaned = 0.00026654 Jy ! Component: 150 - total flux cleaned = 0.000253812 Jy ! Component: 200 - total flux cleaned = 0.000231041 Jy ! Total flux subtracted in 200 components = 0.000231041 Jy ! Clean residual min=-0.002332 max=0.002439 Jy/beam ! Clean residual mean=-0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0465238 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.0465239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055700Jy sigma=0.475909 ! Fit after self-cal, rms=0.055727Jy sigma=0.475866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-61.5, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146525 Jy ! Component: 100 - total flux cleaned = 0.00163367 Jy ! Component: 150 - total flux cleaned = 0.00163797 Jy ! Component: 200 - total flux cleaned = 0.00170759 Jy ! Total flux subtracted in 200 components = 0.00170759 Jy ! Clean residual min=-0.002064 max=0.001871 Jy/beam ! Clean residual mean=-0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0482314 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.0482314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055617Jy sigma=0.474985 ! Fit after self-cal, rms=0.055582Jy sigma=0.474781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055582Jy sigma=0.474781 ! Fit after self-cal, rms=0.054978Jy sigma=0.474727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.566 mas, bmaj=17.52 mas, bpa=-2.128 degrees ! Estimated noise=1.54145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00096882 Jy ! Component: 100 - total flux cleaned = 0.00104772 Jy ! Component: 150 - total flux cleaned = 0.00100884 Jy ! Component: 200 - total flux cleaned = 0.000992237 Jy ! Total flux subtracted in 200 components = 0.000992237 Jy ! Clean residual min=-0.002034 max=0.001889 Jy/beam ! Clean residual mean=-0.000000 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0492237 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.0492237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054960Jy sigma=0.474604 ! Fit after self-cal, rms=0.054953Jy sigma=0.474555 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.84265e-05 Jy ! Component: 100 - total flux cleaned = 4.24832e-05 Jy ! Component: 150 - total flux cleaned = 4.24008e-05 Jy ! Component: 200 - total flux cleaned = 1.45112e-05 Jy ! Total flux subtracted in 200 components = 1.45112e-05 Jy ! Clean residual min=-0.001994 max=0.001848 Jy/beam ! Clean residual mean=-0.000000 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0492382 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.0492382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054943Jy sigma=0.474501 ! Fit after self-cal, rms=0.054940Jy sigma=0.474481 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.359 mas, bpa=-2.052 degrees ! Estimated noise=1.21969 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.123 x 8.359 at -2.052 degrees (North through East) ! Clean map min=-0.002209 max=0.043913 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=7.34 mas, bpa=-1.2 degrees ! Estimated noise=1.52273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333314 Jy ! Component: 100 - total flux cleaned = 0.0414342 Jy ! Component: 150 - total flux cleaned = 0.0444978 Jy ! Component: 200 - total flux cleaned = 0.0461108 Jy ! Total flux subtracted in 200 components = 0.0461108 Jy ! Clean residual min=-0.003413 max=0.003171 Jy/beam ! Clean residual mean=-0.000002 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0461108 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0461108 Jy ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.359 mas, bpa=-2.052 degrees ! Estimated noise=1.21969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013113 Jy ! Component: 100 - total flux cleaned = 0.0020288 Jy ! Component: 150 - total flux cleaned = 0.00226278 Jy ! Component: 200 - total flux cleaned = 0.00241806 Jy ! Total flux subtracted in 200 components = 0.00241806 Jy ! Clean residual min=-0.002407 max=0.001990 Jy/beam ! Clean residual mean=-0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0485289 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 0.0485289 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.566 mas, bmaj=17.52 mas, bpa=-2.128 degrees ! Estimated noise=1.54145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000891596 Jy ! Component: 100 - total flux cleaned = 0.00121585 Jy ! Component: 150 - total flux cleaned = 0.00131166 Jy ! Component: 200 - total flux cleaned = 0.00131212 Jy ! Total flux subtracted in 200 components = 0.00131212 Jy ! Clean residual min=-0.001964 max=0.001946 Jy/beam ! Clean residual mean=-0.000001 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.049841 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.09349e-05 Jy ! Component: 100 - total flux cleaned = -1.9572e-05 Jy ! Component: 150 - total flux cleaned = -5.10425e-05 Jy ! Component: 200 - total flux cleaned = -6.64031e-05 Jy ! Total flux subtracted in 200 components = -6.64031e-05 Jy ! Clean residual min=-0.001934 max=0.001878 Jy/beam ! Clean residual mean=-0.000000 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0497746 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 0.0497746 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.359 mas, bpa=-2.052 degrees ! Estimated noise=1.21969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133605 Jy ! Component: 100 - total flux cleaned = -1.5219e-05 Jy ! Component: 150 - total flux cleaned = 2.16238e-05 Jy ! Component: 200 - total flux cleaned = 5.34604e-05 Jy ! Total flux subtracted in 200 components = 5.34604e-05 Jy ! Clean residual min=-0.002031 max=0.001790 Jy/beam ! Clean residual mean=-0.000000 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0498281 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.0498281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054928Jy sigma=0.474443 ! Fit after self-cal, rms=0.054918Jy sigma=0.474352 wmodel J0953-0840_S_b_map.mod ! Writing 69 model components to file: J0953-0840_S_b_map.mod wobs J0953-0840_S_b_uvs.fits ! Writing UV FITS file: J0953-0840_S_b_uvs.fits wwins J0953-0840_S_b_map.win ! wwins: Wrote 2 windows to J0953-0840_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342956 Jy ! Component: 100 - total flux cleaned = -0.000309357 Jy ! Component: 150 - total flux cleaned = -0.000433363 Jy ! Component: 200 - total flux cleaned = -0.000521726 Jy ! Component: 250 - total flux cleaned = -0.000606528 Jy ! Component: 300 - total flux cleaned = -0.000579304 Jy ! Component: 350 - total flux cleaned = -0.000579314 Jy ! Component: 400 - total flux cleaned = -0.000554335 Jy ! Component: 450 - total flux cleaned = -0.000602633 Jy ! Component: 500 - total flux cleaned = -0.000625924 Jy ! Component: 550 - total flux cleaned = -0.000671672 Jy ! Component: 600 - total flux cleaned = -0.000716078 Jy ! Component: 650 - total flux cleaned = -0.000715771 Jy ! Component: 700 - total flux cleaned = -0.000653126 Jy ! Component: 750 - total flux cleaned = -0.00059193 Jy ! Component: 800 - total flux cleaned = -0.000511772 Jy ! Component: 850 - total flux cleaned = -0.000433152 Jy ! Component: 900 - total flux cleaned = -0.000337727 Jy ! Component: 950 - total flux cleaned = -0.000262846 Jy ! Component: 1000 - total flux cleaned = -0.000189433 Jy ! Component: 1050 - total flux cleaned = -0.000171452 Jy ! Component: 1100 - total flux cleaned = -0.000118533 Jy ! Component: 1150 - total flux cleaned = -8.40307e-05 Jy ! Component: 1200 - total flux cleaned = -4.96955e-05 Jy ! Component: 1250 - total flux cleaned = -1.58997e-05 Jy ! Component: 1300 - total flux cleaned = 5.03456e-05 Jy ! Component: 1350 - total flux cleaned = 6.67323e-05 Jy ! Component: 1400 - total flux cleaned = 0.000146746 Jy ! Component: 1450 - total flux cleaned = 0.00016253 Jy ! Component: 1500 - total flux cleaned = 0.000208791 Jy ! Component: 1550 - total flux cleaned = 0.000223933 Jy ! Component: 1600 - total flux cleaned = 0.000284262 Jy ! Component: 1650 - total flux cleaned = 0.000284364 Jy ! Component: 1700 - total flux cleaned = 0.000357587 Jy ! Component: 1750 - total flux cleaned = 0.000415559 Jy ! Component: 1800 - total flux cleaned = 0.000515331 Jy ! Component: 1850 - total flux cleaned = 0.000613673 Jy ! Component: 1900 - total flux cleaned = 0.000669153 Jy ! Component: 1950 - total flux cleaned = 0.000764927 Jy ! Component: 2000 - total flux cleaned = 0.000792239 Jy ! Component: 2050 - total flux cleaned = 0.000872184 Jy ! Component: 2100 - total flux cleaned = 0.000898494 Jy ! Component: 2150 - total flux cleaned = 0.000937718 Jy ! Component: 2200 - total flux cleaned = 0.000989321 Jy ! Component: 2250 - total flux cleaned = 0.00104022 Jy ! Component: 2300 - total flux cleaned = 0.00107793 Jy ! Component: 2350 - total flux cleaned = 0.00111522 Jy ! Component: 2400 - total flux cleaned = 0.00120145 Jy ! Component: 2450 - total flux cleaned = 0.00123785 Jy ! Component: 2500 - total flux cleaned = 0.00129804 Jy ! Component: 2550 - total flux cleaned = 0.00136958 Jy ! Component: 2600 - total flux cleaned = 0.00139302 Jy ! Component: 2650 - total flux cleaned = 0.00143964 Jy ! Component: 2700 - total flux cleaned = 0.00142815 Jy ! Component: 2750 - total flux cleaned = 0.00145102 Jy ! Component: 2800 - total flux cleaned = 0.00146238 Jy ! Component: 2850 - total flux cleaned = 0.00146243 Jy ! Component: 2900 - total flux cleaned = 0.00150689 Jy ! Component: 2950 - total flux cleaned = 0.00150689 Jy ! Component: 3000 - total flux cleaned = 0.00152885 Jy ! Component: 3050 - total flux cleaned = 0.00152879 Jy ! Component: 3100 - total flux cleaned = 0.00153947 Jy ! Component: 3150 - total flux cleaned = 0.00153942 Jy ! Component: 3200 - total flux cleaned = 0.00154995 Jy ! Component: 3250 - total flux cleaned = 0.00150815 Jy ! Component: 3300 - total flux cleaned = 0.0015289 Jy ! Component: 3350 - total flux cleaned = 0.00155965 Jy ! Component: 3400 - total flux cleaned = 0.00153926 Jy ! Component: 3450 - total flux cleaned = 0.00153926 Jy ! Component: 3500 - total flux cleaned = 0.00156939 Jy ! Component: 3550 - total flux cleaned = 0.00154952 Jy ! Component: 3600 - total flux cleaned = 0.00155939 Jy ! Component: 3650 - total flux cleaned = 0.00154955 Jy ! Component: 3700 - total flux cleaned = 0.00153011 Jy ! Component: 3750 - total flux cleaned = 0.0015591 Jy ! Component: 3800 - total flux cleaned = 0.00155896 Jy ! Component: 3850 - total flux cleaned = 0.00153989 Jy ! Component: 3900 - total flux cleaned = 0.00151163 Jy ! Component: 3950 - total flux cleaned = 0.00152086 Jy ! Component: 4000 - total flux cleaned = 0.0014649 Jy ! Component: 4050 - total flux cleaned = 0.00142785 Jy ! Total flux subtracted in 4096 components = 0.00137266 Jy ! Clean residual min=-0.000581 max=0.000659 Jy/beam ! Clean residual mean=0.000000 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.0512007 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 319 components and 0.0512007 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0953-0840_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.123 x 8.359 at -2.052 degrees (North through East) ! Clean map min=-0.0018938 max=0.043137 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0953-0840_S_b_map.fits wmodel /image_prod/ug002_uva//J0953-0840_S_b_map.mod ! Writing 319 model components to file: /image_prod/ug002_uva//J0953-0840_S_b_map.mod wobs /image_prod/ug002_uva//J0953-0840_S_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0953-0840_S_b_uvs.fits wwins /image_prod/ug002_uva//J0953-0840_S_b_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0953-0840_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0431366 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164231 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14217 1.14217 2.28434 4.56868 9.13735 18.2747 36.5494 73.0988 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.043 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 262.658 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0953-0840_S_b_dfm.log closed on Wed Mar 4 23:14:47 2020