! Started logfile: /image_prod/ug002_uva//J0952+5048_S_dfm.log on Wed Mar 4 23:13:53 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0952+5048_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0952+5048_S_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.99 visibilities/baseline/integration-bin. ! Found source: J0952+5048 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 8019 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0952+5048_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.005949Jy sigma=8.818966 ! Fit after self-cal, rms=0.934452Jy sigma=8.229763 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=4.618 mas, bpa=4.408 degrees ! Estimated noise=1.4822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510132 Jy ! Component: 100 - total flux cleaned = 0.0633819 Jy ! Total flux subtracted in 100 components = 0.0633819 Jy ! Clean residual min=-0.004185 max=0.004848 Jy/beam ! Clean residual mean=0.000004 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.0633819 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0633819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073589Jy sigma=0.496481 ! Fit after self-cal, rms=0.073145Jy sigma=0.494406 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=5.344 mas, bpa=0.7978 degrees ! Estimated noise=0.935352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502083 Jy ! Component: 100 - total flux cleaned = 0.00663509 Jy ! Component: 150 - total flux cleaned = 0.00681404 Jy ! Component: 200 - total flux cleaned = 0.00681501 Jy ! Total flux subtracted in 200 components = 0.00681501 Jy ! Clean residual min=-0.004315 max=0.004170 Jy/beam ! Clean residual mean=0.000000 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.0701969 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0701969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072663Jy sigma=0.492659 ! Fit after self-cal, rms=0.072653Jy sigma=0.492610 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.919 x 5.344 at 0.7978 degrees (North through East) ! Clean map min=-0.0042328 max=0.065985 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.29 HN 1.07 KP 1.07 ! LA 1.03 MK 1.05 NL 1.03 OV 0.64 ! PT 1.11 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.20 HN 1.02 KP 1.04 ! LA 1.01 MK 1.01 NL 0.88 OV 0.92 ! PT 1.11 SC 0.65 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.26 HN 1.07 KP 1.02 ! LA 1.08 MK 1.08 NL 0.89 OV 0.61 ! PT 1.04 SC 0.99 ! ! ! Fit before self-cal, rms=0.072653Jy sigma=0.492610 ! Fit after self-cal, rms=0.061423Jy sigma=0.474087 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.892 mas, bmaj=5.347 mas, bpa=3.456 degrees ! Estimated noise=0.931703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293343 Jy ! Component: 100 - total flux cleaned = -0.000317503 Jy ! Component: 150 - total flux cleaned = -0.000317392 Jy ! Component: 200 - total flux cleaned = -0.000300149 Jy ! Total flux subtracted in 200 components = -0.000300149 Jy ! Clean residual min=-0.002243 max=0.002489 Jy/beam ! Clean residual mean=-0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.0698968 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0698968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061404Jy sigma=0.473968 ! Fit after self-cal, rms=0.061421Jy sigma=0.472867 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061421Jy sigma=0.472867 ! Fit after self-cal, rms=0.063403Jy sigma=0.468046 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=5.3 mas, bpa=3.566 degrees ! Estimated noise=0.928371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.2105e-05 Jy ! Component: 100 - total flux cleaned = 9.22722e-05 Jy ! Component: 150 - total flux cleaned = 9.23438e-05 Jy ! Component: 200 - total flux cleaned = 7.95821e-05 Jy ! Total flux subtracted in 200 components = 7.95821e-05 Jy ! Clean residual min=-0.001625 max=0.001583 Jy/beam ! Clean residual mean=0.000005 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0699764 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 0.0699764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063395Jy sigma=0.468004 ! Fit after self-cal, rms=0.063467Jy sigma=0.467726 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102327 Jy ! Component: 100 - total flux cleaned = -0.000114317 Jy ! Component: 150 - total flux cleaned = -0.000125139 Jy ! Component: 200 - total flux cleaned = -0.000135889 Jy ! Total flux subtracted in 200 components = -0.000135889 Jy ! Clean residual min=-0.001655 max=0.001528 Jy/beam ! Clean residual mean=0.000004 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0698405 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.0698405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063461Jy sigma=0.467699 ! Fit after self-cal, rms=0.063461Jy sigma=0.467696 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063461Jy sigma=0.467696 ! Fit after self-cal, rms=0.063648Jy sigma=0.467673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=5.287 mas, bpa=3.576 degrees ! Estimated noise=0.927596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140955 Jy ! Component: 100 - total flux cleaned = 0.000140597 Jy ! Component: 150 - total flux cleaned = 0.000129464 Jy ! Component: 200 - total flux cleaned = 0.000119323 Jy ! Total flux subtracted in 200 components = 0.000119323 Jy ! Clean residual min=-0.001621 max=0.001560 Jy/beam ! Clean residual mean=0.000005 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0699598 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0699598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063643Jy sigma=0.467650 ! Fit after self-cal, rms=0.063649Jy sigma=0.467646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.4942e-05 Jy ! Component: 100 - total flux cleaned = -1.48286e-05 Jy ! Component: 150 - total flux cleaned = -1.46789e-05 Jy ! Component: 200 - total flux cleaned = -2.3747e-05 Jy ! Total flux subtracted in 200 components = -2.3747e-05 Jy ! Clean residual min=-0.001621 max=0.001546 Jy/beam ! Clean residual mean=0.000005 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.069936 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.069936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063645Jy sigma=0.467630 ! Fit after self-cal, rms=0.063645Jy sigma=0.467628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063645Jy sigma=0.467628 ! Fit after self-cal, rms=0.063598Jy sigma=0.467624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.054 mas, bmaj=9.145 mas, bpa=12.29 degrees ! Estimated noise=1.11589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003539 Jy ! Component: 100 - total flux cleaned = 0.000431693 Jy ! Component: 150 - total flux cleaned = 0.000456361 Jy ! Component: 200 - total flux cleaned = 0.000477786 Jy ! Total flux subtracted in 200 components = 0.000477786 Jy ! Clean residual min=-0.001843 max=0.001522 Jy/beam ! Clean residual mean=0.000010 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0704138 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.0704138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063598Jy sigma=0.467632 ! Fit after self-cal, rms=0.063599Jy sigma=0.467630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.85243e-05 Jy ! Component: 100 - total flux cleaned = 3.39956e-05 Jy ! Component: 150 - total flux cleaned = 5.21801e-05 Jy ! Component: 200 - total flux cleaned = 6.02174e-05 Jy ! Total flux subtracted in 200 components = 6.02174e-05 Jy ! Clean residual min=-0.001842 max=0.001522 Jy/beam ! Clean residual mean=0.000010 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.070474 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.070474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063599Jy sigma=0.467635 ! Fit after self-cal, rms=0.063599Jy sigma=0.467632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=5.279 mas, bpa=3.522 degrees ! Estimated noise=0.927221 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 5.279 at 3.522 degrees (North through East) ! Clean map min=-0.0015254 max=0.06546 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=4.571 mas, bpa=5.914 degrees ! Estimated noise=1.48279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0511981 Jy ! Component: 100 - total flux cleaned = 0.0637508 Jy ! Component: 150 - total flux cleaned = 0.0685005 Jy ! Component: 200 - total flux cleaned = 0.0700712 Jy ! Total flux subtracted in 200 components = 0.0700712 Jy ! Clean residual min=-0.002643 max=0.002574 Jy/beam ! Clean residual mean=0.000006 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0700712 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0700712 Jy ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=5.279 mas, bpa=3.522 degrees ! Estimated noise=0.927221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.22593e-05 Jy ! Component: 100 - total flux cleaned = 8.49655e-05 Jy ! Component: 150 - total flux cleaned = 6.4587e-05 Jy ! Component: 200 - total flux cleaned = 2.94662e-05 Jy ! Total flux subtracted in 200 components = 2.94662e-05 Jy ! Clean residual min=-0.001678 max=0.001580 Jy/beam ! Clean residual mean=0.000005 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0701007 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0701007 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.054 mas, bmaj=9.145 mas, bpa=12.29 degrees ! Estimated noise=1.11589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348703 Jy ! Component: 100 - total flux cleaned = 0.000381799 Jy ! Component: 150 - total flux cleaned = 0.000387346 Jy ! Component: 200 - total flux cleaned = 0.00039734 Jy ! Total flux subtracted in 200 components = 0.00039734 Jy ! Clean residual min=-0.001847 max=0.001513 Jy/beam ! Clean residual mean=0.000010 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.070498 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.61989e-06 Jy ! Component: 100 - total flux cleaned = 9.21349e-06 Jy ! Component: 150 - total flux cleaned = 1.33893e-05 Jy ! Component: 200 - total flux cleaned = 1.74445e-05 Jy ! Total flux subtracted in 200 components = 1.74445e-05 Jy ! Clean residual min=-0.001844 max=0.001516 Jy/beam ! Clean residual mean=0.000010 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0705154 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0705154 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=5.279 mas, bpa=3.522 degrees ! Estimated noise=0.927221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122941 Jy ! Component: 100 - total flux cleaned = -0.000177925 Jy ! Component: 150 - total flux cleaned = -0.000202846 Jy ! Component: 200 - total flux cleaned = -0.000237785 Jy ! Total flux subtracted in 200 components = -0.000237785 Jy ! Clean residual min=-0.001642 max=0.001566 Jy/beam ! Clean residual mean=0.000005 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0702777 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0702777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063610Jy sigma=0.467705 ! Fit after self-cal, rms=0.063612Jy sigma=0.467689 wmodel J0952+5048_S_map.mod ! Writing 30 model components to file: J0952+5048_S_map.mod wobs J0952+5048_S_uvs.fits ! Writing UV FITS file: J0952+5048_S_uvs.fits wwins J0952+5048_S_map.win ! wwins: Wrote 1 windows to J0952+5048_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021936 Jy ! Component: 100 - total flux cleaned = 0.000571263 Jy ! Component: 150 - total flux cleaned = 0.000882157 Jy ! Component: 200 - total flux cleaned = 0.00108225 Jy ! Component: 250 - total flux cleaned = 0.00122831 Jy ! Component: 300 - total flux cleaned = 0.00137063 Jy ! Component: 350 - total flux cleaned = 0.00136977 Jy ! Component: 400 - total flux cleaned = 0.00139199 Jy ! Component: 450 - total flux cleaned = 0.00141416 Jy ! Component: 500 - total flux cleaned = 0.00145794 Jy ! Component: 550 - total flux cleaned = 0.00143636 Jy ! Component: 600 - total flux cleaned = 0.0014791 Jy ! Component: 650 - total flux cleaned = 0.00145851 Jy ! Component: 700 - total flux cleaned = 0.00143887 Jy ! Component: 750 - total flux cleaned = 0.0015608 Jy ! Component: 800 - total flux cleaned = 0.00160035 Jy ! Component: 850 - total flux cleaned = 0.00154121 Jy ! Component: 900 - total flux cleaned = 0.00158037 Jy ! Component: 950 - total flux cleaned = 0.00150355 Jy ! Component: 1000 - total flux cleaned = 0.00154161 Jy ! Component: 1050 - total flux cleaned = 0.00148521 Jy ! Component: 1100 - total flux cleaned = 0.00154046 Jy ! Component: 1150 - total flux cleaned = 0.00141175 Jy ! Component: 1200 - total flux cleaned = 0.00137592 Jy ! Component: 1250 - total flux cleaned = 0.00139387 Jy ! Component: 1300 - total flux cleaned = 0.00134057 Jy ! Component: 1350 - total flux cleaned = 0.00125304 Jy ! Component: 1400 - total flux cleaned = 0.001236 Jy ! Component: 1450 - total flux cleaned = 0.00121891 Jy ! Component: 1500 - total flux cleaned = 0.00125299 Jy ! Component: 1550 - total flux cleaned = 0.00123585 Jy ! Component: 1600 - total flux cleaned = 0.00115249 Jy ! Component: 1650 - total flux cleaned = 0.00115241 Jy ! Component: 1700 - total flux cleaned = 0.00107072 Jy ! Component: 1750 - total flux cleaned = 0.00110323 Jy ! Component: 1800 - total flux cleaned = 0.00113507 Jy ! Component: 1850 - total flux cleaned = 0.001103 Jy ! Component: 1900 - total flux cleaned = 0.000976896 Jy ! Component: 1950 - total flux cleaned = 0.00103961 Jy ! Component: 2000 - total flux cleaned = 0.000931144 Jy ! Component: 2050 - total flux cleaned = 0.000916008 Jy ! Component: 2100 - total flux cleaned = 0.000946519 Jy ! Component: 2150 - total flux cleaned = 0.000901339 Jy ! Component: 2200 - total flux cleaned = 0.00091611 Jy ! Component: 2250 - total flux cleaned = 0.000856899 Jy ! Component: 2300 - total flux cleaned = 0.000871503 Jy ! Component: 2350 - total flux cleaned = 0.000798394 Jy ! Component: 2400 - total flux cleaned = 0.000783879 Jy ! Component: 2450 - total flux cleaned = 0.000755059 Jy ! Component: 2500 - total flux cleaned = 0.000711959 Jy ! Component: 2550 - total flux cleaned = 0.000640923 Jy ! Component: 2600 - total flux cleaned = 0.000669383 Jy ! Component: 2650 - total flux cleaned = 0.000655331 Jy ! Component: 2700 - total flux cleaned = 0.000641465 Jy ! Component: 2750 - total flux cleaned = 0.000586217 Jy ! Component: 2800 - total flux cleaned = 0.000627515 Jy ! Component: 2850 - total flux cleaned = 0.000600241 Jy ! Component: 2900 - total flux cleaned = 0.000573138 Jy ! Component: 2950 - total flux cleaned = 0.000559643 Jy ! Component: 3000 - total flux cleaned = 0.000492979 Jy ! Component: 3050 - total flux cleaned = 0.000519605 Jy ! Component: 3100 - total flux cleaned = 0.000519499 Jy ! Component: 3150 - total flux cleaned = 0.000454144 Jy ! Component: 3200 - total flux cleaned = 0.000480265 Jy ! Component: 3250 - total flux cleaned = 0.000467369 Jy ! Component: 3300 - total flux cleaned = 0.000492952 Jy ! Component: 3350 - total flux cleaned = 0.000467482 Jy ! Component: 3400 - total flux cleaned = 0.00049297 Jy ! Component: 3450 - total flux cleaned = 0.0005181 Jy ! Component: 3500 - total flux cleaned = 0.000493023 Jy ! Component: 3550 - total flux cleaned = 0.000480679 Jy ! Component: 3600 - total flux cleaned = 0.000480558 Jy ! Component: 3650 - total flux cleaned = 0.000468249 Jy ! Component: 3700 - total flux cleaned = 0.000517333 Jy ! Component: 3750 - total flux cleaned = 0.00054179 Jy ! Component: 3800 - total flux cleaned = 0.000529622 Jy ! Component: 3850 - total flux cleaned = 0.000589571 Jy ! Component: 3900 - total flux cleaned = 0.00055364 Jy ! Component: 3950 - total flux cleaned = 0.000553604 Jy ! Component: 4000 - total flux cleaned = 0.000541787 Jy ! Component: 4050 - total flux cleaned = 0.000553448 Jy ! Total flux subtracted in 4096 components = 0.000483193 Jy ! Clean residual min=-0.000678 max=0.000841 Jy/beam ! Clean residual mean=0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0707609 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 328 components and 0.0707609 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0952+5048_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 5.279 at 3.522 degrees (North through East) ! Clean map min=-0.0011335 max=0.065331 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0952+5048_S_map.fits wmodel /image_prod/ug002_uva//J0952+5048_S_map.mod ! Writing 328 model components to file: /image_prod/ug002_uva//J0952+5048_S_map.mod wobs /image_prod/ug002_uva//J0952+5048_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0952+5048_S_uvs.fits wwins /image_prod/ug002_uva//J0952+5048_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0952+5048_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0653313 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021365 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.981075 0.981075 1.96215 3.9243 7.8486 15.6972 31.3944 62.7888 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 305.787 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0952+5048_S_dfm.log closed on Wed Mar 4 23:13:57 2020