! Started logfile: /image_prod/ug002_uva//J0944+5202_S_dfm.log on Wed Mar  4 23:10:53 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0944+5202_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0944+5202_S_uva.fits
! AN table 1: 45 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.729012 visibilities/baseline/integration-bin.
! Found source: J0944+5202
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3543 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0944+5202_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.063030Jy  sigma=7.781229
! Fit after  self-cal, rms=0.696597Jy  sigma=4.985785
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.001 mas, bmaj=5.731 mas, bpa=18.83 degrees
! Estimated noise=2.4773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.255795 Jy
! Component: 100  -  total flux cleaned = 0.368149 Jy
! Total flux subtracted in 100 components = 0.368149 Jy
! Clean residual min=-0.028267 max=0.054239 Jy/beam
! Clean residual mean=0.000065 rms=0.008209 Jy/beam
! Combined flux in latest and established models = 0.368149 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.368149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.158139Jy  sigma=1.060305
! Fit after  self-cal, rms=0.151107Jy  sigma=1.023425
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.069416 Jy
! Component: 100  -  total flux cleaned = 0.107271 Jy
! Total flux subtracted in 100 components = 0.107271 Jy
! Clean residual min=-0.019346 max=0.024287 Jy/beam
! Clean residual mean=0.000022 rms=0.004784 Jy/beam
! Combined flux in latest and established models = 0.475421 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.475421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113093Jy  sigma=0.688474
! Fit after  self-cal, rms=0.111938Jy  sigma=0.677716
! Inverting map 
! Added new window around map position (1.5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0283414 Jy
! Component: 100  -  total flux cleaned = 0.0437108 Jy
! Total flux subtracted in 100 components = 0.0437108 Jy
! Clean residual min=-0.015484 max=0.017333 Jy/beam
! Clean residual mean=0.000006 rms=0.003942 Jy/beam
! Combined flux in latest and established models = 0.519132 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 34 components and 0.519132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103748Jy  sigma=0.603625
! Fit after  self-cal, rms=0.103410Jy  sigma=0.600170
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=6.083 mas, bpa=19.87 degrees
! Estimated noise=1.66985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160373 Jy
! Component: 100  -  total flux cleaned = 0.0205947 Jy
! Component: 150  -  total flux cleaned = 0.0226021 Jy
! Component: 200  -  total flux cleaned = 0.0242935 Jy
! Total flux subtracted in 200 components = 0.0242935 Jy
! Clean residual min=-0.014260 max=0.013930 Jy/beam
! Clean residual mean=-0.000019 rms=0.003421 Jy/beam
! Combined flux in latest and established models = 0.543425 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 43 components and 0.543425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100033Jy  sigma=0.571962
! Fit after  self-cal, rms=0.099759Jy  sigma=0.569898
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.434 x 6.083 at 19.87 degrees (North through East)
! Clean map  min=-0.013461  max=0.32102 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.06     HN        1.01     KP        1.01     
!   LA        1.00     MK        1.05     NL        0.99     OV        0.83     
!   SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        1.04     KP        1.04     
!   LA        1.03     MK        1.05     NL        0.91     OV        0.89     
!   SC        0.83     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.08     HN        1.00     KP        1.04     
!   LA        1.02     MK        1.06     NL        0.88     OV        0.90     
!   SC        1.07     
! 
! 
! Fit before self-cal, rms=0.099759Jy  sigma=0.569898
! Fit after  self-cal, rms=0.083470Jy  sigma=0.495254
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=6.136 mas, bpa=19.56 degrees
! Estimated noise=1.67879 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00530761 Jy
! Component: 100  -  total flux cleaned = -0.00477208 Jy
! Component: 150  -  total flux cleaned = -0.00431148 Jy
! Component: 200  -  total flux cleaned = -0.00420554 Jy
! Total flux subtracted in 200 components = -0.00420554 Jy
! Clean residual min=-0.007397 max=0.009208 Jy/beam
! Clean residual mean=0.000017 rms=0.002123 Jy/beam
! Combined flux in latest and established models = 0.53922 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.53922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082370Jy  sigma=0.491864
! Fit after  self-cal, rms=0.082140Jy  sigma=0.490727
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082140Jy  sigma=0.490727
! Fit after  self-cal, rms=0.071988Jy  sigma=0.436606
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=6.141 mas, bpa=19.86 degrees
! Estimated noise=1.66539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194603 Jy
! Component: 100  -  total flux cleaned = 0.00241261 Jy
! Component: 150  -  total flux cleaned = 0.00253348 Jy
! Component: 200  -  total flux cleaned = 0.00263695 Jy
! Total flux subtracted in 200 components = 0.00263695 Jy
! Clean residual min=-0.004611 max=0.005184 Jy/beam
! Clean residual mean=0.000002 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.541857 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 63 components and 0.541857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071293Jy  sigma=0.432588
! Fit after  self-cal, rms=0.071374Jy  sigma=0.431734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-81.5, -61).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037766 Jy
! Component: 100  -  total flux cleaned = 0.00403288 Jy
! Component: 150  -  total flux cleaned = 0.00403636 Jy
! Component: 200  -  total flux cleaned = 0.00414036 Jy
! Total flux subtracted in 200 components = 0.00414036 Jy
! Clean residual min=-0.004250 max=0.004366 Jy/beam
! Clean residual mean=0.000003 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.545997 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 80 components and 0.545997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070869Jy  sigma=0.428481
! Fit after  self-cal, rms=0.070845Jy  sigma=0.428325
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070845Jy  sigma=0.428325
! Fit after  self-cal, rms=0.070916Jy  sigma=0.427555
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.39 mas, bmaj=6.144 mas, bpa=19.88 degrees
! Estimated noise=1.66375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171746 Jy
! Component: 100  -  total flux cleaned = 0.00232522 Jy
! Component: 150  -  total flux cleaned = 0.00250102 Jy
! Component: 200  -  total flux cleaned = 0.00234378 Jy
! Total flux subtracted in 200 components = 0.00234378 Jy
! Clean residual min=-0.003733 max=0.003976 Jy/beam
! Clean residual mean=0.000003 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.548341 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 88 components and 0.548341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070619Jy  sigma=0.425776
! Fit after  self-cal, rms=0.070584Jy  sigma=0.425590
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443496 Jy
! Component: 100  -  total flux cleaned = 0.000523457 Jy
! Component: 150  -  total flux cleaned = 0.000522407 Jy
! Component: 200  -  total flux cleaned = 0.000394541 Jy
! Total flux subtracted in 200 components = 0.000394541 Jy
! Clean residual min=-0.003537 max=0.003758 Jy/beam
! Clean residual mean=0.000003 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.548735 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 93 components and 0.548735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070425Jy  sigma=0.424659
! Fit after  self-cal, rms=0.070405Jy  sigma=0.424573
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070405Jy  sigma=0.424573
! Fit after  self-cal, rms=0.070418Jy  sigma=0.424261
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.941 mas, bmaj=8.669 mas, bpa=26.03 degrees
! Estimated noise=2.09747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116917 Jy
! Component: 100  -  total flux cleaned = 0.000934953 Jy
! Component: 150  -  total flux cleaned = 0.000783639 Jy
! Component: 200  -  total flux cleaned = 0.000652336 Jy
! Total flux subtracted in 200 components = 0.000652336 Jy
! Clean residual min=-0.003130 max=0.003085 Jy/beam
! Clean residual mean=0.000007 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.549388 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 109 components and 0.549388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070391Jy  sigma=0.423917
! Fit after  self-cal, rms=0.070384Jy  sigma=0.423883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107946 Jy
! Component: 100  -  total flux cleaned = 7.59765e-05 Jy
! Component: 150  -  total flux cleaned = 7.39516e-05 Jy
! Component: 200  -  total flux cleaned = 9.67305e-05 Jy
! Total flux subtracted in 200 components = 9.67305e-05 Jy
! Clean residual min=-0.003044 max=0.003066 Jy/beam
! Clean residual mean=0.000006 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.549484 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.549485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070383Jy  sigma=0.423782
! Fit after  self-cal, rms=0.070372Jy  sigma=0.423760
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=6.143 mas, bpa=19.92 degrees
! Estimated noise=1.66246 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.378 x 6.143 at 19.92 degrees (North through East)
! Clean map  min=-0.0031343  max=0.31648 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.934 mas, bmaj=5.766 mas, bpa=18.73 degrees
! Estimated noise=2.3988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.259614 Jy
! Component: 100  -  total flux cleaned = 0.37975 Jy
! Component: 150  -  total flux cleaned = 0.444809 Jy
! Component: 200  -  total flux cleaned = 0.4825 Jy
! Total flux subtracted in 200 components = 0.4825 Jy
! Clean residual min=-0.009694 max=0.019167 Jy/beam
! Clean residual mean=0.000025 rms=0.002872 Jy/beam
! Combined flux in latest and established models = 0.4825 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.4825 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=6.143 mas, bpa=19.92 degrees
! Estimated noise=1.66246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275318 Jy
! Component: 100  -  total flux cleaned = 0.0436568 Jy
! Component: 150  -  total flux cleaned = 0.0537825 Jy
! Component: 200  -  total flux cleaned = 0.0597975 Jy
! Total flux subtracted in 200 components = 0.0597975 Jy
! Clean residual min=-0.004219 max=0.005318 Jy/beam
! Clean residual mean=0.000007 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.542297 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 46 components and 0.542297 Jy
! Inverting map 
! Added new window around map position (-6.5, 90.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349031 Jy
! Component: 100  -  total flux cleaned = 0.00506942 Jy
! Component: 150  -  total flux cleaned = 0.00638815 Jy
! Component: 200  -  total flux cleaned = 0.00702139 Jy
! Total flux subtracted in 200 components = 0.00702139 Jy
! Clean residual min=-0.003463 max=0.003726 Jy/beam
! Clean residual mean=0.000003 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.549319 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.549319 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.941 mas, bmaj=8.669 mas, bpa=26.03 degrees
! Estimated noise=2.09747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198609 Jy
! Component: 100  -  total flux cleaned = 0.00206825 Jy
! Component: 150  -  total flux cleaned = 0.00200058 Jy
! Component: 200  -  total flux cleaned = 0.00182562 Jy
! Total flux subtracted in 200 components = 0.00182562 Jy
! Clean residual min=-0.003198 max=0.003209 Jy/beam
! Clean residual mean=0.000006 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.551144 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010792 Jy
! Component: 100  -  total flux cleaned = -0.000298483 Jy
! Component: 150  -  total flux cleaned = -0.000341668 Jy
! Component: 200  -  total flux cleaned = -0.000301562 Jy
! Total flux subtracted in 200 components = -0.000301562 Jy
! Clean residual min=-0.003079 max=0.003190 Jy/beam
! Clean residual mean=0.000005 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.550843 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 114 components and 0.550843 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=6.143 mas, bpa=19.92 degrees
! Estimated noise=1.66246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.87042e-06 Jy
! Component: 100  -  total flux cleaned = -0.000265749 Jy
! Component: 150  -  total flux cleaned = -0.000267676 Jy
! Component: 200  -  total flux cleaned = -0.000267816 Jy
! Total flux subtracted in 200 components = -0.000267816 Jy
! Clean residual min=-0.003197 max=0.003105 Jy/beam
! Clean residual mean=0.000002 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.550575 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 0.550575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070276Jy  sigma=0.423316
! Fit after  self-cal, rms=0.070140Jy  sigma=0.422569
wmodel J0944+5202_S_map.mod
! Writing 129 model components to file: J0944+5202_S_map.mod
wobs   J0944+5202_S_uvs.fits
! Writing UV FITS file: J0944+5202_S_uvs.fits
wwins  J0944+5202_S_map.win
! wwins: Wrote 4 windows to J0944+5202_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000552121 Jy
! Component: 100  -  total flux cleaned = 0.000720555 Jy
! Component: 150  -  total flux cleaned = 0.000563679 Jy
! Component: 200  -  total flux cleaned = 0.000513472 Jy
! Component: 250  -  total flux cleaned = 0.000269544 Jy
! Component: 300  -  total flux cleaned = 0.000128191 Jy
! Component: 350  -  total flux cleaned = 0.000220289 Jy
! Component: 400  -  total flux cleaned = 0.000353423 Jy
! Component: 450  -  total flux cleaned = 0.0004838 Jy
! Component: 500  -  total flux cleaned = 0.000654263 Jy
! Component: 550  -  total flux cleaned = 0.000777978 Jy
! Component: 600  -  total flux cleaned = 0.00077823 Jy
! Component: 650  -  total flux cleaned = 0.000738818 Jy
! Component: 700  -  total flux cleaned = 0.000777561 Jy
! Component: 750  -  total flux cleaned = 0.000815393 Jy
! Component: 800  -  total flux cleaned = 0.000741505 Jy
! Component: 850  -  total flux cleaned = 0.000779086 Jy
! Component: 900  -  total flux cleaned = 0.000744464 Jy
! Component: 950  -  total flux cleaned = 0.000745782 Jy
! Component: 1000  -  total flux cleaned = 0.000746367 Jy
! Component: 1050  -  total flux cleaned = 0.000712895 Jy
! Component: 1100  -  total flux cleaned = 0.000712971 Jy
! Component: 1150  -  total flux cleaned = 0.00061537 Jy
! Component: 1200  -  total flux cleaned = 0.000520896 Jy
! Component: 1250  -  total flux cleaned = 0.000552296 Jy
! Component: 1300  -  total flux cleaned = 0.00049121 Jy
! Component: 1350  -  total flux cleaned = 0.000552692 Jy
! Component: 1400  -  total flux cleaned = 0.000582258 Jy
! Component: 1450  -  total flux cleaned = 0.000493481 Jy
! Component: 1500  -  total flux cleaned = 0.000638988 Jy
! Component: 1550  -  total flux cleaned = 0.000580766 Jy
! Component: 1600  -  total flux cleaned = 0.000552337 Jy
! Component: 1650  -  total flux cleaned = 0.00057988 Jy
! Component: 1700  -  total flux cleaned = 0.000524859 Jy
! Component: 1750  -  total flux cleaned = 0.000552366 Jy
! Component: 1800  -  total flux cleaned = 0.000606036 Jy
! Component: 1850  -  total flux cleaned = 0.000606528 Jy
! Component: 1900  -  total flux cleaned = 0.000554542 Jy
! Component: 1950  -  total flux cleaned = 0.000528773 Jy
! Component: 2000  -  total flux cleaned = 0.000452386 Jy
! Component: 2050  -  total flux cleaned = 0.000602873 Jy
! Component: 2100  -  total flux cleaned = 0.000577782 Jy
! Component: 2150  -  total flux cleaned = 0.000675431 Jy
! Component: 2200  -  total flux cleaned = 0.000675087 Jy
! Component: 2250  -  total flux cleaned = 0.00074669 Jy
! Component: 2300  -  total flux cleaned = 0.000746816 Jy
! Component: 2350  -  total flux cleaned = 0.000699685 Jy
! Component: 2400  -  total flux cleaned = 0.000746014 Jy
! Component: 2450  -  total flux cleaned = 0.000700138 Jy
! Component: 2500  -  total flux cleaned = 0.000767782 Jy
! Component: 2550  -  total flux cleaned = 0.000767735 Jy
! Component: 2600  -  total flux cleaned = 0.000767803 Jy
! Component: 2650  -  total flux cleaned = 0.000745797 Jy
! Component: 2700  -  total flux cleaned = 0.000789755 Jy
! Component: 2750  -  total flux cleaned = 0.000789427 Jy
! Component: 2800  -  total flux cleaned = 0.000853356 Jy
! Component: 2850  -  total flux cleaned = 0.000895752 Jy
! Component: 2900  -  total flux cleaned = 0.000916291 Jy
! Component: 2950  -  total flux cleaned = 0.000854319 Jy
! Component: 3000  -  total flux cleaned = 0.00083434 Jy
! Component: 3050  -  total flux cleaned = 0.000935753 Jy
! Component: 3100  -  total flux cleaned = 0.000935695 Jy
! Component: 3150  -  total flux cleaned = 0.000955301 Jy
! Component: 3200  -  total flux cleaned = 0.000896204 Jy
! Component: 3250  -  total flux cleaned = 0.000896418 Jy
! Component: 3300  -  total flux cleaned = 0.000858075 Jy
! Component: 3350  -  total flux cleaned = 0.000877119 Jy
! Component: 3400  -  total flux cleaned = 0.000839185 Jy
! Component: 3450  -  total flux cleaned = 0.000858135 Jy
! Component: 3500  -  total flux cleaned = 0.000764862 Jy
! Component: 3550  -  total flux cleaned = 0.000746244 Jy
! Component: 3600  -  total flux cleaned = 0.000746298 Jy
! Component: 3650  -  total flux cleaned = 0.000618982 Jy
! Component: 3700  -  total flux cleaned = 0.000673245 Jy
! Component: 3750  -  total flux cleaned = 0.000709085 Jy
! Component: 3800  -  total flux cleaned = 0.000726884 Jy
! Component: 3850  -  total flux cleaned = 0.000744411 Jy
! Component: 3900  -  total flux cleaned = 0.000675106 Jy
! Component: 3950  -  total flux cleaned = 0.000744028 Jy
! Component: 4000  -  total flux cleaned = 0.00077846 Jy
! Component: 4050  -  total flux cleaned = 0.000795156 Jy
! Total flux subtracted in 4096 components = 0.000795439 Jy
! Clean residual min=-0.001155 max=0.000885 Jy/beam
! Clean residual mean=-0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.55137 Jy
keep
! Adding 283 model components to the UV plane model.
! The established model now contains 412 components and 0.55137 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0944+5202_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.378 x 6.143 at 19.92 degrees (North through East)
! Clean map  min=-0.002533  max=0.31607 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0944+5202_S_map.fits
wmodel /image_prod/ug002_uva//J0944+5202_S_map.mod
! Writing 412 model components to file: /image_prod/ug002_uva//J0944+5202_S_map.mod
wobs   /image_prod/ug002_uva//J0944+5202_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0944+5202_S_uvs.fits
wwins  /image_prod/ug002_uva//J0944+5202_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0944+5202_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.316069 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000295671 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.280639 0.280639 0.561278 1.12256 2.24511 4.49022 8.98045 17.9609 35.9218 71.8436
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.316 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1068.99 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0944+5202_S_dfm.log closed on Wed Mar  4 23:10:57 2020