! Started logfile: /image_prod/ug002_uva//J0943+6150_S_dfm.log on Wed Mar 4 23:10:22 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0943+6150_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0943+6150_S_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991407 visibilities/baseline/integration-bin. ! Found source: J0943+6150 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 10038 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0943+6150_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.010968Jy sigma=7.910468 ! Fit after self-cal, rms=0.917138Jy sigma=7.190734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=3.852 mas, bpa=-52.91 degrees ! Estimated noise=1.51917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.064565 Jy ! Component: 100 - total flux cleaned = 0.0796333 Jy ! Total flux subtracted in 100 components = 0.0796333 Jy ! Clean residual min=-0.004281 max=0.005768 Jy/beam ! Clean residual mean=-0.000002 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.0796334 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0796334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072969Jy sigma=0.474470 ! Fit after self-cal, rms=0.072807Jy sigma=0.472854 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=4.502 mas, bpa=-49.54 degrees ! Estimated noise=0.936057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639357 Jy ! Component: 100 - total flux cleaned = 0.0094153 Jy ! Component: 150 - total flux cleaned = 0.0109724 Jy ! Component: 200 - total flux cleaned = 0.0117153 Jy ! Total flux subtracted in 200 components = 0.0117153 Jy ! Clean residual min=-0.004123 max=0.003490 Jy/beam ! Clean residual mean=0.000006 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0913486 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.0913486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072147Jy sigma=0.469171 ! Fit after self-cal, rms=0.072158Jy sigma=0.469103 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.265 x 4.502 at -49.54 degrees (North through East) ! Clean map min=-0.0040413 max=0.083436 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.99 HN 1.08 KP 1.01 ! LA 1.07 MK 1.09 NL 1.02 OV 1.08 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.01 HN 1.03 KP 1.00 ! LA 1.08 MK 1.15 NL 1.03 OV 0.86 ! PT 1.02 SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.97 HN 1.04 KP 1.01 ! LA 1.06 MK 1.17 NL 0.85 OV 0.99 ! PT 1.01 SC 0.96 ! ! ! Fit before self-cal, rms=0.072158Jy sigma=0.469103 ! Fit after self-cal, rms=0.069217Jy sigma=0.463841 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.378 mas, bmaj=4.538 mas, bpa=-55.11 degrees ! Estimated noise=0.941459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000823551 Jy ! Component: 100 - total flux cleaned = -0.000740873 Jy ! Component: 150 - total flux cleaned = -0.000669616 Jy ! Component: 200 - total flux cleaned = -0.000605412 Jy ! Total flux subtracted in 200 components = -0.000605412 Jy ! Clean residual min=-0.002708 max=0.002584 Jy/beam ! Clean residual mean=0.000002 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0907432 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0907432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069167Jy sigma=0.463509 ! Fit after self-cal, rms=0.069162Jy sigma=0.463329 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069162Jy sigma=0.463329 ! Fit after self-cal, rms=0.071692Jy sigma=0.454906 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=4.553 mas, bpa=-49.73 degrees ! Estimated noise=0.937872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.65213e-05 Jy ! Component: 100 - total flux cleaned = -4.41195e-05 Jy ! Component: 150 - total flux cleaned = -6.464e-05 Jy ! Component: 200 - total flux cleaned = -0.000121337 Jy ! Total flux subtracted in 200 components = -0.000121337 Jy ! Clean residual min=-0.001625 max=0.001695 Jy/beam ! Clean residual mean=0.000004 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0906219 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0906219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071662Jy sigma=0.454783 ! Fit after self-cal, rms=0.071730Jy sigma=0.454531 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.44009e-05 Jy ! Component: 100 - total flux cleaned = -0.000139324 Jy ! Component: 150 - total flux cleaned = -0.000181133 Jy ! Component: 200 - total flux cleaned = -0.000220059 Jy ! Total flux subtracted in 200 components = -0.000220059 Jy ! Clean residual min=-0.001653 max=0.001658 Jy/beam ! Clean residual mean=0.000004 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0904018 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0904018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071719Jy sigma=0.454488 ! Fit after self-cal, rms=0.071718Jy sigma=0.454482 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071718Jy sigma=0.454482 ! Fit after self-cal, rms=0.072656Jy sigma=0.454428 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=4.556 mas, bpa=-43.94 degrees ! Estimated noise=0.939184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.03462e-05 Jy ! Component: 100 - total flux cleaned = -6.53949e-06 Jy ! Component: 150 - total flux cleaned = -3.8005e-05 Jy ! Component: 200 - total flux cleaned = -8.16215e-05 Jy ! Total flux subtracted in 200 components = -8.16215e-05 Jy ! Clean residual min=-0.001644 max=0.001653 Jy/beam ! Clean residual mean=0.000005 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0903202 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0903202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072639Jy sigma=0.454371 ! Fit after self-cal, rms=0.072647Jy sigma=0.454366 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.60434e-06 Jy ! Component: 100 - total flux cleaned = -8.40095e-05 Jy ! Component: 150 - total flux cleaned = -0.000107623 Jy ! Component: 200 - total flux cleaned = -0.000141166 Jy ! Total flux subtracted in 200 components = -0.000141166 Jy ! Clean residual min=-0.001645 max=0.001641 Jy/beam ! Clean residual mean=0.000004 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.090179 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.090179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072639Jy sigma=0.454345 ! Fit after self-cal, rms=0.072639Jy sigma=0.454341 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072639Jy sigma=0.454341 ! Fit after self-cal, rms=0.073205Jy sigma=0.454318 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.437 mas, bmaj=9.436 mas, bpa=78.5 degrees ! Estimated noise=1.11914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027822 Jy ! Component: 100 - total flux cleaned = -0.000293024 Jy ! Component: 150 - total flux cleaned = -0.000313803 Jy ! Component: 200 - total flux cleaned = -0.000326679 Jy ! Total flux subtracted in 200 components = -0.000326679 Jy ! Clean residual min=-0.001637 max=0.001755 Jy/beam ! Clean residual mean=0.000010 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0898523 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 43 components and 0.0898523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073200Jy sigma=0.454306 ! Fit after self-cal, rms=0.073204Jy sigma=0.454305 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.38682e-05 Jy ! Component: 100 - total flux cleaned = -2.57074e-05 Jy ! Component: 150 - total flux cleaned = -3.68895e-05 Jy ! Component: 200 - total flux cleaned = -5.26892e-05 Jy ! Total flux subtracted in 200 components = -5.26892e-05 Jy ! Clean residual min=-0.001634 max=0.001759 Jy/beam ! Clean residual mean=0.000010 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0897996 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.0897996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073201Jy sigma=0.454297 ! Fit after self-cal, rms=0.073201Jy sigma=0.454295 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.315 mas, bmaj=4.563 mas, bpa=-40.23 degrees ! Estimated noise=0.940565 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.315 x 4.563 at -40.23 degrees (North through East) ! Clean map min=-0.0016126 max=0.08409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=3.901 mas, bpa=-42.15 degrees ! Estimated noise=1.53137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0651378 Jy ! Component: 100 - total flux cleaned = 0.0803009 Jy ! Component: 150 - total flux cleaned = 0.0863144 Jy ! Component: 200 - total flux cleaned = 0.0892701 Jy ! Total flux subtracted in 200 components = 0.0892701 Jy ! Clean residual min=-0.003426 max=0.003544 Jy/beam ! Clean residual mean=0.000001 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.0892701 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0892701 Jy ! Inverting map and beam ! Estimated beam: bmin=4.315 mas, bmaj=4.563 mas, bpa=-40.23 degrees ! Estimated noise=0.940565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734096 Jy ! Component: 100 - total flux cleaned = 0.000757887 Jy ! Component: 150 - total flux cleaned = 0.000724612 Jy ! Component: 200 - total flux cleaned = 0.000710713 Jy ! Total flux subtracted in 200 components = 0.000710713 Jy ! Clean residual min=-0.001669 max=0.001592 Jy/beam ! Clean residual mean=0.000004 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0899808 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0899808 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.437 mas, bmaj=9.436 mas, bpa=78.5 degrees ! Estimated noise=1.11914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126764 Jy ! Component: 100 - total flux cleaned = -0.000154014 Jy ! Component: 150 - total flux cleaned = -0.00015984 Jy ! Component: 200 - total flux cleaned = -0.000165305 Jy ! Total flux subtracted in 200 components = -0.000165305 Jy ! Clean residual min=-0.001638 max=0.001764 Jy/beam ! Clean residual mean=0.000010 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0898155 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.36299e-06 Jy ! Component: 100 - total flux cleaned = -1.01404e-05 Jy ! Component: 150 - total flux cleaned = -1.48289e-05 Jy ! Component: 200 - total flux cleaned = -1.90151e-05 Jy ! Total flux subtracted in 200 components = -1.90151e-05 Jy ! Clean residual min=-0.001636 max=0.001766 Jy/beam ! Clean residual mean=0.000010 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0897964 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0897964 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.315 mas, bmaj=4.563 mas, bpa=-40.23 degrees ! Estimated noise=0.940565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.55793e-05 Jy ! Component: 100 - total flux cleaned = 8.39895e-05 Jy ! Component: 150 - total flux cleaned = 8.35314e-05 Jy ! Component: 200 - total flux cleaned = 9.55972e-05 Jy ! Total flux subtracted in 200 components = 9.55972e-05 Jy ! Clean residual min=-0.001652 max=0.001597 Jy/beam ! Clean residual mean=0.000004 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.089892 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.089892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073204Jy sigma=0.454335 ! Fit after self-cal, rms=0.073199Jy sigma=0.454324 wmodel J0943+6150_S_map.mod ! Writing 43 model components to file: J0943+6150_S_map.mod wobs J0943+6150_S_uvs.fits ! Writing UV FITS file: J0943+6150_S_uvs.fits wwins J0943+6150_S_map.win ! wwins: Wrote 1 windows to J0943+6150_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.4497e-05 Jy ! Component: 100 - total flux cleaned = -6.68617e-05 Jy ! Component: 150 - total flux cleaned = 4.10512e-05 Jy ! Component: 200 - total flux cleaned = 0.000145235 Jy ! Component: 250 - total flux cleaned = 0.000118963 Jy ! Component: 300 - total flux cleaned = 0.000168082 Jy ! Component: 350 - total flux cleaned = 0.000192067 Jy ! Component: 400 - total flux cleaned = 0.000191763 Jy ! Component: 450 - total flux cleaned = 0.000283464 Jy ! Component: 500 - total flux cleaned = 0.00030555 Jy ! Component: 550 - total flux cleaned = 0.000371477 Jy ! Component: 600 - total flux cleaned = 0.000414713 Jy ! Component: 650 - total flux cleaned = 0.000414956 Jy ! Component: 700 - total flux cleaned = 0.000498328 Jy ! Component: 750 - total flux cleaned = 0.000477701 Jy ! Component: 800 - total flux cleaned = 0.000437534 Jy ! Component: 850 - total flux cleaned = 0.000478051 Jy ! Component: 900 - total flux cleaned = 0.000517463 Jy ! Component: 950 - total flux cleaned = 0.000459142 Jy ! Component: 1000 - total flux cleaned = 0.000478408 Jy ! Component: 1050 - total flux cleaned = 0.000459189 Jy ! Component: 1100 - total flux cleaned = 0.000496819 Jy ! Component: 1150 - total flux cleaned = 0.000533753 Jy ! Component: 1200 - total flux cleaned = 0.000533573 Jy ! Component: 1250 - total flux cleaned = 0.000497435 Jy ! Component: 1300 - total flux cleaned = 0.000586891 Jy ! Component: 1350 - total flux cleaned = 0.000515803 Jy ! Component: 1400 - total flux cleaned = 0.000515903 Jy ! Component: 1450 - total flux cleaned = 0.000533695 Jy ! Component: 1500 - total flux cleaned = 0.000619502 Jy ! Component: 1550 - total flux cleaned = 0.000636438 Jy ! Component: 1600 - total flux cleaned = 0.00058608 Jy ! Component: 1650 - total flux cleaned = 0.000686894 Jy ! Component: 1700 - total flux cleaned = 0.000769705 Jy ! Component: 1750 - total flux cleaned = 0.000769853 Jy ! Component: 1800 - total flux cleaned = 0.000851132 Jy ! Component: 1850 - total flux cleaned = 0.000931474 Jy ! Component: 1900 - total flux cleaned = 0.000979321 Jy ! Component: 1950 - total flux cleaned = 0.00105878 Jy ! Component: 2000 - total flux cleaned = 0.00109022 Jy ! Component: 2050 - total flux cleaned = 0.00118379 Jy ! Component: 2100 - total flux cleaned = 0.00126109 Jy ! Component: 2150 - total flux cleaned = 0.00135297 Jy ! Component: 2200 - total flux cleaned = 0.00141378 Jy ! Component: 2250 - total flux cleaned = 0.00147439 Jy ! Component: 2300 - total flux cleaned = 0.00156431 Jy ! Component: 2350 - total flux cleaned = 0.00162388 Jy ! Component: 2400 - total flux cleaned = 0.00169767 Jy ! Component: 2450 - total flux cleaned = 0.00180023 Jy ! Component: 2500 - total flux cleaned = 0.00184393 Jy ! Component: 2550 - total flux cleaned = 0.00190186 Jy ! Component: 2600 - total flux cleaned = 0.00195953 Jy ! Component: 2650 - total flux cleaned = 0.00197369 Jy ! Component: 2700 - total flux cleaned = 0.0020304 Jy ! Component: 2750 - total flux cleaned = 0.00201625 Jy ! Component: 2800 - total flux cleaned = 0.00208593 Jy ! Component: 2850 - total flux cleaned = 0.00209982 Jy ! Component: 2900 - total flux cleaned = 0.00211364 Jy ! Component: 2950 - total flux cleaned = 0.00214113 Jy ! Component: 3000 - total flux cleaned = 0.00219546 Jy ! Component: 3050 - total flux cleaned = 0.00223591 Jy ! Component: 3100 - total flux cleaned = 0.00224951 Jy ! Component: 3150 - total flux cleaned = 0.00227617 Jy ! Component: 3200 - total flux cleaned = 0.00226293 Jy ! Component: 3250 - total flux cleaned = 0.00231573 Jy ! Component: 3300 - total flux cleaned = 0.00228944 Jy ! Component: 3350 - total flux cleaned = 0.00236766 Jy ! Component: 3400 - total flux cleaned = 0.00239354 Jy ! Component: 3450 - total flux cleaned = 0.00240658 Jy ! Component: 3500 - total flux cleaned = 0.00245788 Jy ! Component: 3550 - total flux cleaned = 0.00248337 Jy ! Component: 3600 - total flux cleaned = 0.00243263 Jy ! Component: 3650 - total flux cleaned = 0.00247037 Jy ! Component: 3700 - total flux cleaned = 0.00250796 Jy ! Component: 3750 - total flux cleaned = 0.002508 Jy ! Component: 3800 - total flux cleaned = 0.00259466 Jy ! Component: 3850 - total flux cleaned = 0.00263154 Jy ! Component: 3900 - total flux cleaned = 0.00259485 Jy ! Component: 3950 - total flux cleaned = 0.00264359 Jy ! Component: 4000 - total flux cleaned = 0.00265566 Jy ! Component: 4050 - total flux cleaned = 0.00269172 Jy ! Total flux subtracted in 4096 components = 0.00266781 Jy ! Clean residual min=-0.000717 max=0.000798 Jy/beam ! Clean residual mean=0.000002 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.0925598 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 324 components and 0.0925598 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0943+6150_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.315 x 4.563 at -40.23 degrees (North through East) ! Clean map min=-0.0011663 max=0.083998 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0943+6150_S_map.fits wmodel /image_prod/ug002_uva//J0943+6150_S_map.mod ! Writing 324 model components to file: /image_prod/ug002_uva//J0943+6150_S_map.mod wobs /image_prod/ug002_uva//J0943+6150_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0943+6150_S_uvs.fits wwins /image_prod/ug002_uva//J0943+6150_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0943+6150_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.083998 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021388 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.763875 0.763875 1.52775 3.0555 6.111 12.222 24.444 48.888 97.776 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.083 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 392.734 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0943+6150_S_dfm.log closed on Wed Mar 4 23:10:26 2020