! Started logfile: /image_prod/ug002_uva//J0941-1335_S_dfm.log on Wed Mar 4 23:09:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0941-1335_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0941-1335_S_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.878472 visibilities/baseline/integration-bin. ! Found source: J0941-1335 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 3795 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0941-1335_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010404Jy sigma=7.237254 ! Fit after self-cal, rms=0.865104Jy sigma=6.001912 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=6.82 mas, bpa=-3.933 degrees ! Estimated noise=2.15673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113395 Jy ! Component: 100 - total flux cleaned = 0.14537 Jy ! Total flux subtracted in 100 components = 0.14537 Jy ! Clean residual min=-0.010671 max=0.016582 Jy/beam ! Clean residual mean=-0.000037 rms=0.003179 Jy/beam ! Combined flux in latest and established models = 0.14537 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.14537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090079Jy sigma=0.531286 ! Fit after self-cal, rms=0.089832Jy sigma=0.530438 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=7.723 mas, bpa=-2.167 degrees ! Estimated noise=1.69804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195217 Jy ! Component: 100 - total flux cleaned = 0.0297544 Jy ! Component: 150 - total flux cleaned = 0.0352698 Jy ! Component: 200 - total flux cleaned = 0.0383277 Jy ! Total flux subtracted in 200 components = 0.0383277 Jy ! Clean residual min=-0.007959 max=0.012242 Jy/beam ! Clean residual mean=-0.000017 rms=0.002429 Jy/beam ! Combined flux in latest and established models = 0.183698 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.183698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088009Jy sigma=0.478817 ! Fit after self-cal, rms=0.088016Jy sigma=0.478532 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.089 x 7.723 at -2.167 degrees (North through East) ! Clean map min=-0.0076452 max=0.14528 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.70 FD 0.96 HN 1.01 KP 0.97 ! LA 0.95 MK 1.00 OV 0.94 PT 0.98 ! SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.78 FD 0.95 HN 1.02 KP 0.95 ! LA 0.95 MK 1.01 OV 0.95 PT 0.97 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.81 FD 0.95 HN 1.10 KP 0.96 ! LA 0.95 MK 1.08 OV 0.92 PT 0.97 ! SC 0.89 ! ! ! Fit before self-cal, rms=0.088016Jy sigma=0.478532 ! Fit after self-cal, rms=0.131492Jy sigma=0.445068 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=7.83 mas, bpa=-1.275 degrees ! Estimated noise=1.70027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.50411e-05 Jy ! Component: 100 - total flux cleaned = -8.92377e-05 Jy ! Component: 150 - total flux cleaned = -0.000192515 Jy ! Component: 200 - total flux cleaned = -0.000379229 Jy ! Total flux subtracted in 200 components = -0.000379229 Jy ! Clean residual min=-0.004149 max=0.005012 Jy/beam ! Clean residual mean=-0.000006 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.183318 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.183318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.131280Jy sigma=0.443051 ! Fit after self-cal, rms=0.131689Jy sigma=0.442759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.131689Jy sigma=0.442759 ! Fit after self-cal, rms=0.137031Jy sigma=0.440774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=7.871 mas, bpa=-1.484 degrees ! Estimated noise=1.70095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130573 Jy ! Component: 100 - total flux cleaned = 0.000130426 Jy ! Component: 150 - total flux cleaned = 6.48634e-05 Jy ! Component: 200 - total flux cleaned = 2.83142e-06 Jy ! Total flux subtracted in 200 components = 2.83142e-06 Jy ! Clean residual min=-0.003663 max=0.004354 Jy/beam ! Clean residual mean=-0.000011 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.183321 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.183321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136910Jy sigma=0.439920 ! Fit after self-cal, rms=0.136916Jy sigma=0.439874 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (51.5, -67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378391 Jy ! Component: 100 - total flux cleaned = 0.00443633 Jy ! Component: 150 - total flux cleaned = 0.00437166 Jy ! Component: 200 - total flux cleaned = 0.00437021 Jy ! Total flux subtracted in 200 components = 0.00437021 Jy ! Clean residual min=-0.003357 max=0.003516 Jy/beam ! Clean residual mean=-0.000004 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.187691 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.187691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136677Jy sigma=0.438420 ! Fit after self-cal, rms=0.136649Jy sigma=0.438194 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136649Jy sigma=0.438194 ! Fit after self-cal, rms=0.136369Jy sigma=0.438083 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=7.876 mas, bpa=-1.476 degrees ! Estimated noise=1.70084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171528 Jy ! Component: 100 - total flux cleaned = 0.00183444 Jy ! Component: 150 - total flux cleaned = 0.00183761 Jy ! Component: 200 - total flux cleaned = 0.00183641 Jy ! Total flux subtracted in 200 components = 0.00183641 Jy ! Clean residual min=-0.003193 max=0.003133 Jy/beam ! Clean residual mean=-0.000003 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.189528 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.189528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136271Jy sigma=0.437640 ! Fit after self-cal, rms=0.136258Jy sigma=0.437589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501957 Jy ! Component: 100 - total flux cleaned = 0.000457571 Jy ! Component: 150 - total flux cleaned = 0.000415422 Jy ! Component: 200 - total flux cleaned = 0.00041539 Jy ! Total flux subtracted in 200 components = 0.00041539 Jy ! Clean residual min=-0.003215 max=0.003068 Jy/beam ! Clean residual mean=-0.000003 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.189943 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.189943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136204Jy sigma=0.437373 ! Fit after self-cal, rms=0.136199Jy sigma=0.437363 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136199Jy sigma=0.437363 ! Fit after self-cal, rms=0.136092Jy sigma=0.437311 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=16.09 mas, bpa=5.043 degrees ! Estimated noise=2.12853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251403 Jy ! Component: 100 - total flux cleaned = 0.000403199 Jy ! Component: 150 - total flux cleaned = 0.000572052 Jy ! Component: 200 - total flux cleaned = 0.000612836 Jy ! Total flux subtracted in 200 components = 0.000612836 Jy ! Clean residual min=-0.003090 max=0.002745 Jy/beam ! Clean residual mean=-0.000005 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.190556 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.190556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136093Jy sigma=0.437195 ! Fit after self-cal, rms=0.136079Jy sigma=0.437157 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43354e-05 Jy ! Component: 100 - total flux cleaned = 0.000115256 Jy ! Component: 150 - total flux cleaned = 0.000154263 Jy ! Component: 200 - total flux cleaned = 0.000171027 Jy ! Total flux subtracted in 200 components = 0.000171027 Jy ! Clean residual min=-0.003080 max=0.002722 Jy/beam ! Clean residual mean=-0.000004 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.190727 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.190727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136080Jy sigma=0.437112 ! Fit after self-cal, rms=0.136069Jy sigma=0.437088 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.881 mas, bpa=-1.417 degrees ! Estimated noise=1.70102 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 7.881 at -1.417 degrees (North through East) ! Clean map min=-0.0029399 max=0.14791 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=6.915 mas, bpa=-3.021 degrees ! Estimated noise=2.15823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113492 Jy ! Component: 100 - total flux cleaned = 0.14816 Jy ! Component: 150 - total flux cleaned = 0.164363 Jy ! Component: 200 - total flux cleaned = 0.172891 Jy ! Total flux subtracted in 200 components = 0.172891 Jy ! Clean residual min=-0.004798 max=0.005321 Jy/beam ! Clean residual mean=-0.000017 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.172891 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.172891 Jy ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.881 mas, bpa=-1.417 degrees ! Estimated noise=1.70102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00634425 Jy ! Component: 100 - total flux cleaned = 0.0104195 Jy ! Component: 150 - total flux cleaned = 0.0132059 Jy ! Component: 200 - total flux cleaned = 0.0150126 Jy ! Total flux subtracted in 200 components = 0.0150126 Jy ! Clean residual min=-0.003461 max=0.003288 Jy/beam ! Clean residual mean=-0.000004 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.187903 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.187903 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=16.09 mas, bpa=5.043 degrees ! Estimated noise=2.12853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185011 Jy ! Component: 100 - total flux cleaned = 0.00229517 Jy ! Component: 150 - total flux cleaned = 0.00246304 Jy ! Component: 200 - total flux cleaned = 0.00246213 Jy ! Total flux subtracted in 200 components = 0.00246213 Jy ! Clean residual min=-0.003325 max=0.002715 Jy/beam ! Clean residual mean=-0.000004 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.190366 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.56996e-07 Jy ! Component: 100 - total flux cleaned = -2.26158e-05 Jy ! Component: 150 - total flux cleaned = -6.19621e-05 Jy ! Component: 200 - total flux cleaned = -8.00068e-05 Jy ! Total flux subtracted in 200 components = -8.00068e-05 Jy ! Clean residual min=-0.003179 max=0.002792 Jy/beam ! Clean residual mean=-0.000005 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.190286 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 72 components and 0.190286 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.881 mas, bpa=-1.417 degrees ! Estimated noise=1.70102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000471469 Jy ! Component: 100 - total flux cleaned = -0.000585322 Jy ! Component: 150 - total flux cleaned = -0.000716224 Jy ! Component: 200 - total flux cleaned = -0.000796901 Jy ! Total flux subtracted in 200 components = -0.000796901 Jy ! Clean residual min=-0.003296 max=0.002926 Jy/beam ! Clean residual mean=-0.000002 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.189489 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.189489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136114Jy sigma=0.437445 ! Fit after self-cal, rms=0.136100Jy sigma=0.437375 wmodel J0941-1335_S_map.mod ! Writing 83 model components to file: J0941-1335_S_map.mod wobs J0941-1335_S_uvs.fits ! Writing UV FITS file: J0941-1335_S_uvs.fits wwins J0941-1335_S_map.win ! wwins: Wrote 2 windows to J0941-1335_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623432 Jy ! Component: 100 - total flux cleaned = -0.000471367 Jy ! Component: 150 - total flux cleaned = -0.000421116 Jy ! Component: 200 - total flux cleaned = -0.000422468 Jy ! Component: 250 - total flux cleaned = -0.000635104 Jy ! Component: 300 - total flux cleaned = -0.000838985 Jy ! Component: 350 - total flux cleaned = -0.000997415 Jy ! Component: 400 - total flux cleaned = -0.00118954 Jy ! Component: 450 - total flux cleaned = -0.0012655 Jy ! Component: 500 - total flux cleaned = -0.00141186 Jy ! Component: 550 - total flux cleaned = -0.00148318 Jy ! Component: 600 - total flux cleaned = -0.00151832 Jy ! Component: 650 - total flux cleaned = -0.00148508 Jy ! Component: 700 - total flux cleaned = -0.00155285 Jy ! Component: 750 - total flux cleaned = -0.00165171 Jy ! Component: 800 - total flux cleaned = -0.00168433 Jy ! Component: 850 - total flux cleaned = -0.00180995 Jy ! Component: 900 - total flux cleaned = -0.00187109 Jy ! Component: 950 - total flux cleaned = -0.00187028 Jy ! Component: 1000 - total flux cleaned = -0.00193019 Jy ! Component: 1050 - total flux cleaned = -0.00192998 Jy ! Component: 1100 - total flux cleaned = -0.00201759 Jy ! Component: 1150 - total flux cleaned = -0.00215962 Jy ! Component: 1200 - total flux cleaned = -0.00218732 Jy ! Component: 1250 - total flux cleaned = -0.0022704 Jy ! Component: 1300 - total flux cleaned = -0.00243333 Jy ! Component: 1350 - total flux cleaned = -0.00251229 Jy ! Component: 1400 - total flux cleaned = -0.00237988 Jy ! Component: 1450 - total flux cleaned = -0.00238008 Jy ! Component: 1500 - total flux cleaned = -0.00243146 Jy ! Component: 1550 - total flux cleaned = -0.00250724 Jy ! Component: 1600 - total flux cleaned = -0.00253209 Jy ! Component: 1650 - total flux cleaned = -0.0025814 Jy ! Component: 1700 - total flux cleaned = -0.00255697 Jy ! Component: 1750 - total flux cleaned = -0.00267691 Jy ! Component: 1800 - total flux cleaned = -0.00272424 Jy ! Component: 1850 - total flux cleaned = -0.00274794 Jy ! Component: 1900 - total flux cleaned = -0.00279449 Jy ! Component: 1950 - total flux cleaned = -0.00279465 Jy ! Component: 2000 - total flux cleaned = -0.00281753 Jy ! Component: 2050 - total flux cleaned = -0.00279545 Jy ! Component: 2100 - total flux cleaned = -0.00283992 Jy ! Component: 2150 - total flux cleaned = -0.00279533 Jy ! Component: 2200 - total flux cleaned = -0.00279542 Jy ! Component: 2250 - total flux cleaned = -0.00273041 Jy ! Component: 2300 - total flux cleaned = -0.00279511 Jy ! Component: 2350 - total flux cleaned = -0.0027524 Jy ! Component: 2400 - total flux cleaned = -0.00277369 Jy ! Component: 2450 - total flux cleaned = -0.00277359 Jy ! Component: 2500 - total flux cleaned = -0.0027112 Jy ! Component: 2550 - total flux cleaned = -0.0027733 Jy ! Component: 2600 - total flux cleaned = -0.00275268 Jy ! Component: 2650 - total flux cleaned = -0.00273237 Jy ! Component: 2700 - total flux cleaned = -0.00273236 Jy ! Component: 2750 - total flux cleaned = -0.00271212 Jy ! Component: 2800 - total flux cleaned = -0.00267218 Jy ! Component: 2850 - total flux cleaned = -0.00273192 Jy ! Component: 2900 - total flux cleaned = -0.00271231 Jy ! Component: 2950 - total flux cleaned = -0.0027321 Jy ! Component: 3000 - total flux cleaned = -0.00275176 Jy ! Component: 3050 - total flux cleaned = -0.00273242 Jy ! Component: 3100 - total flux cleaned = -0.00277119 Jy ! Component: 3150 - total flux cleaned = -0.00279032 Jy ! Component: 3200 - total flux cleaned = -0.00277127 Jy ! Component: 3250 - total flux cleaned = -0.00280938 Jy ! Component: 3300 - total flux cleaned = -0.00280937 Jy ! Component: 3350 - total flux cleaned = -0.00284706 Jy ! Component: 3400 - total flux cleaned = -0.00284715 Jy ! Component: 3450 - total flux cleaned = -0.00286602 Jy ! Component: 3500 - total flux cleaned = -0.00294019 Jy ! Component: 3550 - total flux cleaned = -0.00295853 Jy ! Component: 3600 - total flux cleaned = -0.00294012 Jy ! Component: 3650 - total flux cleaned = -0.0029585 Jy ! Component: 3700 - total flux cleaned = -0.00294025 Jy ! Component: 3750 - total flux cleaned = -0.00292216 Jy ! Component: 3800 - total flux cleaned = -0.0029403 Jy ! Component: 3850 - total flux cleaned = -0.00299418 Jy ! Component: 3900 - total flux cleaned = -0.00295827 Jy ! Component: 3950 - total flux cleaned = -0.00294046 Jy ! Component: 4000 - total flux cleaned = -0.00295827 Jy ! Component: 4050 - total flux cleaned = -0.00299356 Jy ! Total flux subtracted in 4096 components = -0.00295836 Jy ! Clean residual min=-0.001025 max=0.000984 Jy/beam ! Clean residual mean=0.000003 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.18653 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 328 components and 0.18653 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0941-1335_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 7.881 at -1.417 degrees (North through East) ! Clean map min=-0.0027834 max=0.14947 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0941-1335_S_map.fits wmodel /image_prod/ug002_uva//J0941-1335_S_map.mod ! Writing 328 model components to file: /image_prod/ug002_uva//J0941-1335_S_map.mod wobs /image_prod/ug002_uva//J0941-1335_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0941-1335_S_uvs.fits wwins /image_prod/ug002_uva//J0941-1335_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0941-1335_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.149473 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000298727 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.599561 0.599561 1.19912 2.39824 4.79649 9.59298 19.186 38.3719 76.7438 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.149 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 500.366 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0941-1335_S_dfm.log closed on Wed Mar 4 23:09:35 2020