! Started logfile: /image_prod/ug002_uva//J0933-1139_S_dfm.log on Wed Mar  4 23:06:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0933-1139_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0933-1139_S_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.863194 visibilities/baseline/integration-bin.
! Found source: J0933-1139
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3729 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0933-1139_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.082010Jy  sigma=7.423377
! Fit after  self-cal, rms=0.685246Jy  sigma=4.305084
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.659 mas, bmaj=6.8 mas, bpa=-2.463 degrees
! Estimated noise=2.64168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.263887 Jy
! Component: 100  -  total flux cleaned = 0.327616 Jy
! Total flux subtracted in 100 components = 0.327616 Jy
! Clean residual min=-0.021447 max=0.037616 Jy/beam
! Clean residual mean=-0.000007 rms=0.006822 Jy/beam
! Combined flux in latest and established models = 0.327616 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.327616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.129163Jy  sigma=0.759298
! Fit after  self-cal, rms=0.129172Jy  sigma=0.759159
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=7.627 mas, bpa=-1.359 degrees
! Estimated noise=1.80418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0378543 Jy
! Component: 100  -  total flux cleaned = 0.0598023 Jy
! Component: 150  -  total flux cleaned = 0.0731764 Jy
! Component: 200  -  total flux cleaned = 0.0813855 Jy
! Total flux subtracted in 200 components = 0.0813855 Jy
! Clean residual min=-0.016606 max=0.029624 Jy/beam
! Clean residual mean=-0.000044 rms=0.005821 Jy/beam
! Combined flux in latest and established models = 0.409001 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 34 components and 0.409002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123677Jy  sigma=0.623394
! Fit after  self-cal, rms=0.123700Jy  sigma=0.623128
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.044 x 7.627 at -1.359 degrees (North through East)
! Clean map  min=-0.016143  max=0.3337 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.41     FD        0.94     HN        1.00     KP        0.99     
!   LA        0.94     MK        1.01     OV        1.00     PT        0.94     
!   SC        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        3.28     FD        0.94     HN        1.00     KP        0.95     
!   LA        0.92     MK        1.03     OV        1.02     PT        0.95     
!   SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.66     FD        0.93     HN        1.10     KP        0.97     
!   LA        0.92     MK        1.02     OV        0.99     PT        0.94     
!   SC        0.93     
! 
! 
! Fit before self-cal, rms=0.123700Jy  sigma=0.623128
! Fit after  self-cal, rms=0.144687Jy  sigma=0.483759
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.027 mas, bmaj=7.772 mas, bpa=-0.9237 degrees
! Estimated noise=1.80765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158437 Jy
! Component: 100  -  total flux cleaned = 0.020339 Jy
! Component: 150  -  total flux cleaned = 0.0216381 Jy
! Component: 200  -  total flux cleaned = 0.0225503 Jy
! Total flux subtracted in 200 components = 0.0225503 Jy
! Clean residual min=-0.009518 max=0.010591 Jy/beam
! Clean residual mean=-0.000002 rms=0.002526 Jy/beam
! Combined flux in latest and established models = 0.431552 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 56 components and 0.431552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.142354Jy  sigma=0.457745
! Fit after  self-cal, rms=0.142586Jy  sigma=0.455805
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.142586Jy  sigma=0.455805
! Fit after  self-cal, rms=0.166426Jy  sigma=0.426503
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.022 mas, bmaj=7.797 mas, bpa=-1.142 degrees
! Estimated noise=1.80143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0073462 Jy
! Component: 100  -  total flux cleaned = 0.00967907 Jy
! Component: 150  -  total flux cleaned = 0.0101243 Jy
! Component: 200  -  total flux cleaned = 0.0102609 Jy
! Total flux subtracted in 200 components = 0.0102609 Jy
! Clean residual min=-0.005731 max=0.006116 Jy/beam
! Clean residual mean=-0.000004 rms=0.001403 Jy/beam
! Combined flux in latest and established models = 0.441813 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 70 components and 0.441813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.165852Jy  sigma=0.419924
! Fit after  self-cal, rms=0.165891Jy  sigma=0.419521
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12, 30.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336879 Jy
! Component: 100  -  total flux cleaned = 0.00380896 Jy
! Component: 150  -  total flux cleaned = 0.00418993 Jy
! Component: 200  -  total flux cleaned = 0.00418763 Jy
! Total flux subtracted in 200 components = 0.00418763 Jy
! Clean residual min=-0.004950 max=0.005074 Jy/beam
! Clean residual mean=-0.000002 rms=0.001238 Jy/beam
! Combined flux in latest and established models = 0.446 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.165531Jy  sigma=0.415702
! Fit after  self-cal, rms=0.165522Jy  sigma=0.415661
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.165522Jy  sigma=0.415661
! Fit after  self-cal, rms=0.166598Jy  sigma=0.414788
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.015 mas, bmaj=7.789 mas, bpa=-1.157 degrees
! Estimated noise=1.7981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240225 Jy
! Component: 100  -  total flux cleaned = 0.00274926 Jy
! Component: 150  -  total flux cleaned = 0.00274931 Jy
! Component: 200  -  total flux cleaned = 0.00254759 Jy
! Total flux subtracted in 200 components = 0.00254759 Jy
! Clean residual min=-0.004142 max=0.004567 Jy/beam
! Clean residual mean=-0.000005 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.448548 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 90 components and 0.448548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166398Jy  sigma=0.412798
! Fit after  self-cal, rms=0.166382Jy  sigma=0.412773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102836 Jy
! Component: 100  -  total flux cleaned = 1.28292e-05 Jy
! Component: 150  -  total flux cleaned = -7.57555e-05 Jy
! Component: 200  -  total flux cleaned = -0.000240353 Jy
! Total flux subtracted in 200 components = -0.000240353 Jy
! Clean residual min=-0.003843 max=0.004326 Jy/beam
! Clean residual mean=-0.000005 rms=0.001033 Jy/beam
! Combined flux in latest and established models = 0.448308 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.448308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166258Jy  sigma=0.411614
! Fit after  self-cal, rms=0.166252Jy  sigma=0.411604
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166252Jy  sigma=0.411604
! Fit after  self-cal, rms=0.166959Jy  sigma=0.411415
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.505 mas, bmaj=15.31 mas, bpa=5.191 degrees
! Estimated noise=2.32844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246791 Jy
! Component: 100  -  total flux cleaned = 0.00268762 Jy
! Component: 150  -  total flux cleaned = 0.00262399 Jy
! Component: 200  -  total flux cleaned = 0.00256578 Jy
! Total flux subtracted in 200 components = 0.00256578 Jy
! Clean residual min=-0.003354 max=0.003301 Jy/beam
! Clean residual mean=-0.000012 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.450873 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 104 components and 0.450873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166941Jy  sigma=0.410679
! Fit after  self-cal, rms=0.166938Jy  sigma=0.410625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.65553e-05 Jy
! Component: 100  -  total flux cleaned = -9.35741e-05 Jy
! Component: 150  -  total flux cleaned = -0.000144231 Jy
! Component: 200  -  total flux cleaned = -0.000144417 Jy
! Total flux subtracted in 200 components = -0.000144417 Jy
! Clean residual min=-0.003346 max=0.003197 Jy/beam
! Clean residual mean=-0.000012 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.450729 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.450729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166935Jy  sigma=0.410377
! Fit after  self-cal, rms=0.166934Jy  sigma=0.410348
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=7.784 mas, bpa=-1.155 degrees
! Estimated noise=1.79643 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.009 x 7.784 at -1.155 degrees (North through East)
! Clean map  min=-0.0052602  max=0.3367 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.636 mas, bmaj=6.976 mas, bpa=-2.315 degrees
! Estimated noise=2.62446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.262039 Jy
! Component: 100  -  total flux cleaned = 0.324098 Jy
! Component: 150  -  total flux cleaned = 0.353775 Jy
! Component: 200  -  total flux cleaned = 0.373667 Jy
! Total flux subtracted in 200 components = 0.373667 Jy
! Clean residual min=-0.009877 max=0.015928 Jy/beam
! Clean residual mean=-0.000018 rms=0.002745 Jy/beam
! Combined flux in latest and established models = 0.373667 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.373667 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=7.784 mas, bpa=-1.155 degrees
! Estimated noise=1.79643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204152 Jy
! Component: 100  -  total flux cleaned = 0.034031 Jy
! Component: 150  -  total flux cleaned = 0.0435987 Jy
! Component: 200  -  total flux cleaned = 0.0506524 Jy
! Total flux subtracted in 200 components = 0.0506524 Jy
! Clean residual min=-0.004371 max=0.005437 Jy/beam
! Clean residual mean=-0.000017 rms=0.001320 Jy/beam
! Combined flux in latest and established models = 0.42432 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 68 components and 0.42432 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.505 mas, bmaj=15.31 mas, bpa=5.191 degrees
! Estimated noise=2.32844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00924893 Jy
! Component: 100  -  total flux cleaned = 0.0147618 Jy
! Component: 150  -  total flux cleaned = 0.018625 Jy
! Component: 200  -  total flux cleaned = 0.0206972 Jy
! Total flux subtracted in 200 components = 0.0206972 Jy
! Clean residual min=-0.003215 max=0.002941 Jy/beam
! Clean residual mean=-0.000013 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.445017 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000830954 Jy
! Component: 100  -  total flux cleaned = 0.00153606 Jy
! Component: 150  -  total flux cleaned = 0.00207383 Jy
! Component: 200  -  total flux cleaned = 0.00253868 Jy
! Total flux subtracted in 200 components = 0.00253868 Jy
! Clean residual min=-0.002705 max=0.002527 Jy/beam
! Clean residual mean=-0.000012 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.447556 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 143 components and 0.447555 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=7.784 mas, bpa=-1.155 degrees
! Estimated noise=1.79643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154634 Jy
! Component: 100  -  total flux cleaned = 0.000577706 Jy
! Component: 150  -  total flux cleaned = 0.000506365 Jy
! Component: 200  -  total flux cleaned = 0.000438366 Jy
! Total flux subtracted in 200 components = 0.000438366 Jy
! Clean residual min=-0.002772 max=0.002908 Jy/beam
! Clean residual mean=-0.000005 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.447994 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 171 components and 0.447994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166620Jy  sigma=0.407079
! Fit after  self-cal, rms=0.166503Jy  sigma=0.406633
wmodel J0933-1139_S_map.mod
! Writing 171 model components to file: J0933-1139_S_map.mod
wobs   J0933-1139_S_uvs.fits
! Writing UV FITS file: J0933-1139_S_uvs.fits
wwins  J0933-1139_S_map.win
! wwins: Wrote 4 windows to J0933-1139_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402408 Jy
! Component: 100  -  total flux cleaned = 0.000496768 Jy
! Component: 150  -  total flux cleaned = 0.000585894 Jy
! Component: 200  -  total flux cleaned = 0.000672365 Jy
! Component: 250  -  total flux cleaned = 0.000795031 Jy
! Component: 300  -  total flux cleaned = 0.000914199 Jy
! Component: 350  -  total flux cleaned = 0.00106735 Jy
! Component: 400  -  total flux cleaned = 0.00106697 Jy
! Component: 450  -  total flux cleaned = 0.0011403 Jy
! Component: 500  -  total flux cleaned = 0.00135223 Jy
! Component: 550  -  total flux cleaned = 0.00135261 Jy
! Component: 600  -  total flux cleaned = 0.00145436 Jy
! Component: 650  -  total flux cleaned = 0.00155267 Jy
! Component: 700  -  total flux cleaned = 0.00164855 Jy
! Component: 750  -  total flux cleaned = 0.00171187 Jy
! Component: 800  -  total flux cleaned = 0.00186584 Jy
! Component: 850  -  total flux cleaned = 0.00198615 Jy
! Component: 900  -  total flux cleaned = 0.00204476 Jy
! Component: 950  -  total flux cleaned = 0.00216138 Jy
! Component: 1000  -  total flux cleaned = 0.00233344 Jy
! Component: 1050  -  total flux cleaned = 0.00250237 Jy
! Component: 1100  -  total flux cleaned = 0.00264058 Jy
! Component: 1150  -  total flux cleaned = 0.00280334 Jy
! Component: 1200  -  total flux cleaned = 0.00293645 Jy
! Component: 1250  -  total flux cleaned = 0.00306841 Jy
! Component: 1300  -  total flux cleaned = 0.00327576 Jy
! Component: 1350  -  total flux cleaned = 0.00345401 Jy
! Component: 1400  -  total flux cleaned = 0.00362997 Jy
! Component: 1450  -  total flux cleaned = 0.00375397 Jy
! Component: 1500  -  total flux cleaned = 0.00387618 Jy
! Component: 1550  -  total flux cleaned = 0.00402055 Jy
! Component: 1600  -  total flux cleaned = 0.00416307 Jy
! Component: 1650  -  total flux cleaned = 0.00432726 Jy
! Component: 1700  -  total flux cleaned = 0.00455839 Jy
! Component: 1750  -  total flux cleaned = 0.00474062 Jy
! Component: 1800  -  total flux cleaned = 0.00485327 Jy
! Component: 1850  -  total flux cleaned = 0.00494271 Jy
! Component: 1900  -  total flux cleaned = 0.00514124 Jy
! Component: 1950  -  total flux cleaned = 0.00527184 Jy
! Component: 2000  -  total flux cleaned = 0.00544422 Jy
! Component: 2050  -  total flux cleaned = 0.00561429 Jy
! Component: 2100  -  total flux cleaned = 0.0056986 Jy
! Component: 2150  -  total flux cleaned = 0.00586533 Jy
! Component: 2200  -  total flux cleaned = 0.0059479 Jy
! Component: 2250  -  total flux cleaned = 0.00604994 Jy
! Component: 2300  -  total flux cleaned = 0.00617129 Jy
! Component: 2350  -  total flux cleaned = 0.00629171 Jy
! Component: 2400  -  total flux cleaned = 0.00631163 Jy
! Component: 2450  -  total flux cleaned = 0.00644931 Jy
! Component: 2500  -  total flux cleaned = 0.0064883 Jy
! Component: 2550  -  total flux cleaned = 0.00648818 Jy
! Component: 2600  -  total flux cleaned = 0.00660316 Jy
! Component: 2650  -  total flux cleaned = 0.00667905 Jy
! Component: 2700  -  total flux cleaned = 0.00667898 Jy
! Component: 2750  -  total flux cleaned = 0.00679109 Jy
! Component: 2800  -  total flux cleaned = 0.00684676 Jy
! Component: 2850  -  total flux cleaned = 0.00686509 Jy
! Component: 2900  -  total flux cleaned = 0.00690168 Jy
! Component: 2950  -  total flux cleaned = 0.00695601 Jy
! Component: 3000  -  total flux cleaned = 0.00697395 Jy
! Component: 3050  -  total flux cleaned = 0.00697407 Jy
! Component: 3100  -  total flux cleaned = 0.00697425 Jy
! Component: 3150  -  total flux cleaned = 0.00706266 Jy
! Component: 3200  -  total flux cleaned = 0.00711533 Jy
! Component: 3250  -  total flux cleaned = 0.00711526 Jy
! Component: 3300  -  total flux cleaned = 0.00714989 Jy
! Component: 3350  -  total flux cleaned = 0.00720169 Jy
! Component: 3400  -  total flux cleaned = 0.00723601 Jy
! Component: 3450  -  total flux cleaned = 0.00733871 Jy
! Component: 3500  -  total flux cleaned = 0.00742408 Jy
! Component: 3550  -  total flux cleaned = 0.00747506 Jy
! Component: 3600  -  total flux cleaned = 0.00754284 Jy
! Component: 3650  -  total flux cleaned = 0.00766091 Jy
! Component: 3700  -  total flux cleaned = 0.00777846 Jy
! Component: 3750  -  total flux cleaned = 0.00787898 Jy
! Component: 3800  -  total flux cleaned = 0.00794568 Jy
! Component: 3850  -  total flux cleaned = 0.00806219 Jy
! Component: 3900  -  total flux cleaned = 0.00817847 Jy
! Component: 3950  -  total flux cleaned = 0.00829435 Jy
! Component: 4000  -  total flux cleaned = 0.00839343 Jy
! Component: 4050  -  total flux cleaned = 0.00850894 Jy
! Total flux subtracted in 4096 components = 0.00860766 Jy
! Clean residual min=-0.000974 max=0.000970 Jy/beam
! Clean residual mean=-0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.456602 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 435 components and 0.456602 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0933-1139_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.009 x 7.784 at -1.155 degrees (North through East)
! Clean map  min=-0.0026496  max=0.34138 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0933-1139_S_map.fits
wmodel /image_prod/ug002_uva//J0933-1139_S_map.mod
! Writing 435 model components to file: /image_prod/ug002_uva//J0933-1139_S_map.mod
wobs   /image_prod/ug002_uva//J0933-1139_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0933-1139_S_uvs.fits
wwins  /image_prod/ug002_uva//J0933-1139_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0933-1139_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.341379 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277231 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.243627 0.243627 0.487254 0.974509 1.94902 3.89803 7.79607 15.5921 31.1843 62.3685
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.341 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1231.39 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0933-1139_S_dfm.log closed on Wed Mar  4 23:06:07 2020