! Started logfile: /image_prod/ug002_uva//J0933+1009_X_dfm.log on Wed Mar  4 23:05:37 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0933+1009_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0933+1009_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.925926 visibilities/baseline/integration-bin.
! Found source: J0933+1009
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30000 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0933+1009_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001635Jy  sigma=10.377703
! Fit after  self-cal, rms=0.976629Jy  sigma=10.121829
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9926 mas, bmaj=2.32 mas, bpa=13.58 degrees
! Estimated noise=0.728568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182396 Jy
! Component: 100  -  total flux cleaned = 0.0223594 Jy
! Total flux subtracted in 100 components = 0.0223594 Jy
! Clean residual min=-0.001799 max=0.002027 Jy/beam
! Clean residual mean=0.000000 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0223594 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0223594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048242Jy  sigma=0.471969
! Fit after  self-cal, rms=0.046437Jy  sigma=0.452700
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00429098 Jy
! Component: 100  -  total flux cleaned = 0.00600526 Jy
! Total flux subtracted in 100 components = 0.00600526 Jy
! Clean residual min=-0.001480 max=0.001628 Jy/beam
! Clean residual mean=-0.000000 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.0283646 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.0283646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.045983Jy  sigma=0.448109
! Fit after  self-cal, rms=0.045963Jy  sigma=0.447885
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.248 mas, bmaj=2.577 mas, bpa=9.601 degrees
! Estimated noise=0.39949 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122177 Jy
! Component: 100  -  total flux cleaned = 0.00122464 Jy
! Component: 150  -  total flux cleaned = 0.00124573 Jy
! Component: 200  -  total flux cleaned = 0.00124557 Jy
! Total flux subtracted in 200 components = 0.00124557 Jy
! Clean residual min=-0.001029 max=0.001111 Jy/beam
! Clean residual mean=0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0296102 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.0296102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.045918Jy  sigma=0.447542
! Fit after  self-cal, rms=0.045910Jy  sigma=0.447437
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.248 x 2.577 at 9.601 degrees (North through East)
! Clean map  min=-0.0010092  max=0.028079 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.12     HN        1.01     KP        1.10     
!   LA        1.08     NL        0.97     OV        0.99     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        0.97     KP        1.10     
!   LA        1.08     NL        1.04     OV        0.94     PT        0.94     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        0.97     KP        1.11     
!   LA        1.00     NL        0.95     OV        1.05     PT        0.93     
!   SC        1.13     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.11     HN        1.01     KP        1.13     
!   LA        0.94     NL        1.03     OV        0.99     PT        1.01     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.94     KP        1.04     
!   LA        1.11     NL        0.99     OV        0.91     PT        0.88     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.85     KP        1.19     
!   LA        1.10     NL        1.06     OV        0.96     PT        0.87     
!   SC        0.87     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        0.94     KP        1.05     
!   LA        1.11     NL        0.95     OV        1.00     PT        0.89     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.96     KP        1.10     
!   LA        1.08     NL        0.99     OV        0.96     PT        0.83     
!   SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.84     KP        1.17     
!   LA        1.16     NL        0.90     OV        0.93     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        0.84     KP        1.11     
!   LA        1.05     NL        0.95     OV        0.90     PT        0.99     
!   SC        0.89     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        0.89     KP        1.15     
!   LA        1.07     NL        0.93     OV        0.94     PT        0.85     
!   SC        0.83     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.92     HN        0.90     KP        1.12     
!   LA        1.08     NL        0.90     OV        1.00     PT        0.89     
!   SC        0.83     
! 
! 
! Fit before self-cal, rms=0.045910Jy  sigma=0.447437
! Fit after  self-cal, rms=0.044312Jy  sigma=0.446136
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.224 mas, bmaj=2.553 mas, bpa=9.611 degrees
! Estimated noise=0.394728 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000995744 Jy
! Component: 100  -  total flux cleaned = 0.00111416 Jy
! Component: 150  -  total flux cleaned = 0.0010514 Jy
! Component: 200  -  total flux cleaned = 0.00103399 Jy
! Total flux subtracted in 200 components = 0.00103399 Jy
! Clean residual min=-0.000849 max=0.000872 Jy/beam
! Clean residual mean=-0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0306442 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 36 components and 0.0306442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044278Jy  sigma=0.445767
! Fit after  self-cal, rms=0.044274Jy  sigma=0.445359
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044274Jy  sigma=0.445359
! Fit after  self-cal, rms=0.044504Jy  sigma=0.444298
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.218 mas, bmaj=2.533 mas, bpa=9.702 degrees
! Estimated noise=0.395402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395301 Jy
! Component: 100  -  total flux cleaned = 0.000513615 Jy
! Component: 150  -  total flux cleaned = 0.000600393 Jy
! Component: 200  -  total flux cleaned = 0.000663914 Jy
! Total flux subtracted in 200 components = 0.000663914 Jy
! Clean residual min=-0.000666 max=0.000728 Jy/beam
! Clean residual mean=-0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0313081 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 52 components and 0.0313081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044491Jy  sigma=0.444181
! Fit after  self-cal, rms=0.044537Jy  sigma=0.443940
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.10254e-05 Jy
! Component: 100  -  total flux cleaned = 6.27835e-06 Jy
! Component: 150  -  total flux cleaned = 1.87143e-05 Jy
! Component: 200  -  total flux cleaned = 4.10409e-05 Jy
! Total flux subtracted in 200 components = 4.10409e-05 Jy
! Clean residual min=-0.000673 max=0.000724 Jy/beam
! Clean residual mean=-0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0313491 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 62 components and 0.0313491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044529Jy  sigma=0.443872
! Fit after  self-cal, rms=0.044529Jy  sigma=0.443849
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044529Jy  sigma=0.443849
! Fit after  self-cal, rms=0.044651Jy  sigma=0.443741
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.209 mas, bmaj=2.521 mas, bpa=9.672 degrees
! Estimated noise=0.39381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312252 Jy
! Component: 100  -  total flux cleaned = 0.000434608 Jy
! Component: 150  -  total flux cleaned = 0.00051749 Jy
! Component: 200  -  total flux cleaned = 0.000571238 Jy
! Total flux subtracted in 200 components = 0.000571238 Jy
! Clean residual min=-0.000677 max=0.000714 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0319204 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 72 components and 0.0319204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044642Jy  sigma=0.443669
! Fit after  self-cal, rms=0.044664Jy  sigma=0.443610
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.2853e-05 Jy
! Component: 100  -  total flux cleaned = 9.35891e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103591 Jy
! Component: 200  -  total flux cleaned = 0.000132581 Jy
! Total flux subtracted in 200 components = 0.000132581 Jy
! Clean residual min=-0.000675 max=0.000722 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0320529 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 82 components and 0.0320529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044659Jy  sigma=0.443567
! Fit after  self-cal, rms=0.044654Jy  sigma=0.443523
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044654Jy  sigma=0.443523
! Fit after  self-cal, rms=0.044513Jy  sigma=0.443489
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=3.121 mas, bpa=-3.567 degrees
! Estimated noise=0.463342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382726 Jy
! Component: 100  -  total flux cleaned = 0.000605865 Jy
! Component: 150  -  total flux cleaned = 0.000688655 Jy
! Component: 200  -  total flux cleaned = 0.000713132 Jy
! Total flux subtracted in 200 components = 0.000713132 Jy
! Clean residual min=-0.000736 max=0.000691 Jy/beam
! Clean residual mean=-0.000001 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0327661 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 94 components and 0.0327661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044509Jy  sigma=0.443461
! Fit after  self-cal, rms=0.044518Jy  sigma=0.443431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.38067e-05 Jy
! Component: 100  -  total flux cleaned = 9.7511e-05 Jy
! Component: 150  -  total flux cleaned = 0.000121822 Jy
! Component: 200  -  total flux cleaned = 0.000150225 Jy
! Total flux subtracted in 200 components = 0.000150225 Jy
! Clean residual min=-0.000744 max=0.000683 Jy/beam
! Clean residual mean=-0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.0329163 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.0329163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044515Jy  sigma=0.443418
! Fit after  self-cal, rms=0.044515Jy  sigma=0.443405
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.202 mas, bmaj=2.513 mas, bpa=9.638 degrees
! Estimated noise=0.391905 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.202 x 2.513 at 9.638 degrees (North through East)
! Clean map  min=-0.00065799  max=0.027326 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9674 mas, bmaj=2.267 mas, bpa=13.87 degrees
! Estimated noise=0.69148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199523 Jy
! Component: 100  -  total flux cleaned = 0.0256875 Jy
! Component: 150  -  total flux cleaned = 0.0286249 Jy
! Component: 200  -  total flux cleaned = 0.029369 Jy
! Total flux subtracted in 200 components = 0.029369 Jy
! Clean residual min=-0.001424 max=0.001365 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.029369 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.029369 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.202 mas, bmaj=2.513 mas, bpa=9.638 degrees
! Estimated noise=0.391905 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017608 Jy
! Component: 100  -  total flux cleaned = 0.0026174 Jy
! Component: 150  -  total flux cleaned = 0.00276425 Jy
! Component: 200  -  total flux cleaned = 0.00288425 Jy
! Total flux subtracted in 200 components = 0.00288425 Jy
! Clean residual min=-0.000736 max=0.000814 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0322533 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.0322533 Jy
! Inverting map 
! Added new window around map position (-0.8, 13.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402559 Jy
! Component: 100  -  total flux cleaned = 0.000612184 Jy
! Component: 150  -  total flux cleaned = 0.000705412 Jy
! Component: 200  -  total flux cleaned = 0.000774314 Jy
! Total flux subtracted in 200 components = 0.000774314 Jy
! Clean residual min=-0.000693 max=0.000709 Jy/beam
! Clean residual mean=-0.000000 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0330276 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 58 components and 0.0330276 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=3.121 mas, bpa=-3.567 degrees
! Estimated noise=0.463342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043856 Jy
! Component: 100  -  total flux cleaned = 0.000683053 Jy
! Component: 150  -  total flux cleaned = 0.000750509 Jy
! Component: 200  -  total flux cleaned = 0.000810932 Jy
! Total flux subtracted in 200 components = 0.000810932 Jy
! Clean residual min=-0.000720 max=0.000645 Jy/beam
! Clean residual mean=-0.000000 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0338385 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.48389e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113144 Jy
! Component: 150  -  total flux cleaned = 0.000151579 Jy
! Component: 200  -  total flux cleaned = 0.000173202 Jy
! Total flux subtracted in 200 components = 0.000173202 Jy
! Clean residual min=-0.000712 max=0.000636 Jy/beam
! Clean residual mean=-0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0340117 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 92 components and 0.0340117 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.202 mas, bmaj=2.513 mas, bpa=9.638 degrees
! Estimated noise=0.391905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.74872e-06 Jy
! Component: 100  -  total flux cleaned = -8.48483e-05 Jy
! Component: 150  -  total flux cleaned = -0.000155358 Jy
! Component: 200  -  total flux cleaned = -0.000177697 Jy
! Total flux subtracted in 200 components = -0.000177697 Jy
! Clean residual min=-0.000678 max=0.000679 Jy/beam
! Clean residual mean=-0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.033834 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 108 components and 0.033834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044501Jy  sigma=0.443298
! Fit after  self-cal, rms=0.044491Jy  sigma=0.443189
wmodel J0933+1009_X_map.mod
! Writing 108 model components to file: J0933+1009_X_map.mod
wobs   J0933+1009_X_uvs.fits
! Writing UV FITS file: J0933+1009_X_uvs.fits
wwins  J0933+1009_X_map.win
! wwins: Wrote 3 windows to J0933+1009_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.82418e-05 Jy
! Component: 100  -  total flux cleaned = -0.000138004 Jy
! Component: 150  -  total flux cleaned = -0.000160615 Jy
! Component: 200  -  total flux cleaned = -0.000214589 Jy
! Component: 250  -  total flux cleaned = -0.000235319 Jy
! Component: 300  -  total flux cleaned = -0.000245544 Jy
! Component: 350  -  total flux cleaned = -0.000235477 Jy
! Component: 400  -  total flux cleaned = -0.000225619 Jy
! Component: 450  -  total flux cleaned = -0.000235206 Jy
! Component: 500  -  total flux cleaned = -0.000225848 Jy
! Component: 550  -  total flux cleaned = -0.000216607 Jy
! Component: 600  -  total flux cleaned = -0.000216478 Jy
! Component: 650  -  total flux cleaned = -0.00018956 Jy
! Component: 700  -  total flux cleaned = -0.000215752 Jy
! Component: 750  -  total flux cleaned = -0.000180902 Jy
! Component: 800  -  total flux cleaned = -0.000146719 Jy
! Component: 850  -  total flux cleaned = -0.000155044 Jy
! Component: 900  -  total flux cleaned = -0.000113398 Jy
! Component: 950  -  total flux cleaned = -8.88684e-05 Jy
! Component: 1000  -  total flux cleaned = -8.10689e-05 Jy
! Component: 1050  -  total flux cleaned = -8.12323e-05 Jy
! Component: 1100  -  total flux cleaned = -8.1314e-05 Jy
! Component: 1150  -  total flux cleaned = -7.34595e-05 Jy
! Component: 1200  -  total flux cleaned = -7.34705e-05 Jy
! Component: 1250  -  total flux cleaned = -7.34283e-05 Jy
! Component: 1300  -  total flux cleaned = -8.10167e-05 Jy
! Component: 1350  -  total flux cleaned = -4.3906e-05 Jy
! Component: 1400  -  total flux cleaned = -6.58986e-05 Jy
! Component: 1450  -  total flux cleaned = -6.59014e-05 Jy
! Component: 1500  -  total flux cleaned = -4.43438e-05 Jy
! Component: 1550  -  total flux cleaned = -5.86015e-05 Jy
! Component: 1600  -  total flux cleaned = -5.16722e-05 Jy
! Component: 1650  -  total flux cleaned = -7.25904e-05 Jy
! Component: 1700  -  total flux cleaned = -3.81446e-05 Jy
! Component: 1750  -  total flux cleaned = -3.14199e-05 Jy
! Component: 1800  -  total flux cleaned = -5.17568e-05 Jy
! Component: 1850  -  total flux cleaned = -5.17824e-05 Jy
! Component: 1900  -  total flux cleaned = -5.18601e-05 Jy
! Component: 1950  -  total flux cleaned = -4.5258e-05 Jy
! Component: 2000  -  total flux cleaned = -2.58525e-05 Jy
! Component: 2050  -  total flux cleaned = -1.93384e-05 Jy
! Component: 2100  -  total flux cleaned = -4.49651e-05 Jy
! Component: 2150  -  total flux cleaned = -2.59593e-05 Jy
! Component: 2200  -  total flux cleaned = -2.59437e-05 Jy
! Component: 2250  -  total flux cleaned = -2.59877e-05 Jy
! Component: 2300  -  total flux cleaned = -3.22181e-05 Jy
! Component: 2350  -  total flux cleaned = -3.82708e-05 Jy
! Component: 2400  -  total flux cleaned = -3.21336e-05 Jy
! Component: 2450  -  total flux cleaned = -3.82017e-05 Jy
! Component: 2500  -  total flux cleaned = -3.82502e-05 Jy
! Component: 2550  -  total flux cleaned = -3.22833e-05 Jy
! Component: 2600  -  total flux cleaned = -3.23165e-05 Jy
! Component: 2650  -  total flux cleaned = -4.39582e-05 Jy
! Component: 2700  -  total flux cleaned = -3.23984e-05 Jy
! Component: 2750  -  total flux cleaned = -3.24108e-05 Jy
! Component: 2800  -  total flux cleaned = -3.24109e-05 Jy
! Component: 2850  -  total flux cleaned = -3.24447e-05 Jy
! Component: 2900  -  total flux cleaned = -3.80959e-05 Jy
! Component: 2950  -  total flux cleaned = -3.25314e-05 Jy
! Component: 3000  -  total flux cleaned = -1.59151e-05 Jy
! Component: 3050  -  total flux cleaned = -1.58945e-05 Jy
! Component: 3100  -  total flux cleaned = 5.59964e-07 Jy
! Component: 3150  -  total flux cleaned = 5.98716e-06 Jy
! Component: 3200  -  total flux cleaned = 5.95632e-06 Jy
! Component: 3250  -  total flux cleaned = 5.94979e-06 Jy
! Component: 3300  -  total flux cleaned = 5.77966e-07 Jy
! Component: 3350  -  total flux cleaned = 5.85687e-06 Jy
! Component: 3400  -  total flux cleaned = 1.63891e-05 Jy
! Component: 3450  -  total flux cleaned = 5.99026e-06 Jy
! Component: 3500  -  total flux cleaned = 5.98295e-06 Jy
! Component: 3550  -  total flux cleaned = 1.11783e-05 Jy
! Component: 3600  -  total flux cleaned = 6.12513e-06 Jy
! Component: 3650  -  total flux cleaned = 2.64291e-05 Jy
! Component: 3700  -  total flux cleaned = 1.63202e-05 Jy
! Component: 3750  -  total flux cleaned = 1.12908e-05 Jy
! Component: 3800  -  total flux cleaned = 3.6314e-05 Jy
! Component: 3850  -  total flux cleaned = 3.62863e-05 Jy
! Component: 3900  -  total flux cleaned = 3.13612e-05 Jy
! Component: 3950  -  total flux cleaned = 4.11769e-05 Jy
! Component: 4000  -  total flux cleaned = 1.67907e-05 Jy
! Component: 4050  -  total flux cleaned = 4.10872e-05 Jy
! Total flux subtracted in 4096 components = 4.58849e-05 Jy
! Clean residual min=-0.000308 max=0.000246 Jy/beam
! Clean residual mean=0.000000 rms=0.000087 Jy/beam
! Combined flux in latest and established models = 0.0338799 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 419 components and 0.0338799 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0933+1009_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.202 x 2.513 at 9.638 degrees (North through East)
! Clean map  min=-0.00057441  max=0.027044 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0933+1009_X_map.fits
wmodel /image_prod/ug002_uva//J0933+1009_X_map.mod
! Writing 419 model components to file: /image_prod/ug002_uva//J0933+1009_X_map.mod
wobs   /image_prod/ug002_uva//J0933+1009_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0933+1009_X_uvs.fits
wwins  /image_prod/ug002_uva//J0933+1009_X_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0933+1009_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0270437 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.69087e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.964091 0.964091 1.92818 3.85637 7.71273 15.4255 30.8509 61.7019
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.027 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  311.173 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0933+1009_X_dfm.log closed on Wed Mar  4 23:05:42 2020