! Started logfile: /image_prod/ug002_uva//J0929+5013_X_dfm.log on Wed Mar 4 23:02:34 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0929+5013_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0929+5013_X_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.721605 visibilities/baseline/integration-bin. ! Found source: J0929+5013 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 14028 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0929+5013_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.115056Jy sigma=8.281223 ! Fit after self-cal, rms=0.517943Jy sigma=3.862585 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6821 mas, bmaj=1.361 mas, bpa=19.87 degrees ! Estimated noise=1.37788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.37049 Jy ! Component: 100 - total flux cleaned = 0.45411 Jy ! Total flux subtracted in 100 components = 0.45411 Jy ! Clean residual min=-0.022179 max=0.029602 Jy/beam ! Clean residual mean=-0.000001 rms=0.004740 Jy/beam ! Combined flux in latest and established models = 0.45411 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.45411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118320Jy sigma=0.876921 ! Fit after self-cal, rms=0.118282Jy sigma=0.876609 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030393 Jy ! Component: 100 - total flux cleaned = 0.0456167 Jy ! Total flux subtracted in 100 components = 0.0456167 Jy ! Clean residual min=-0.019340 max=0.026268 Jy/beam ! Clean residual mean=-0.000003 rms=0.004360 Jy/beam ! Combined flux in latest and established models = 0.499727 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.499727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107298Jy sigma=0.794618 ! Fit after self-cal, rms=0.107277Jy sigma=0.794520 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8657 mas, bmaj=1.571 mas, bpa=19.33 degrees ! Estimated noise=0.812154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145789 Jy ! Component: 100 - total flux cleaned = 0.0215389 Jy ! Component: 150 - total flux cleaned = 0.0233662 Jy ! Component: 200 - total flux cleaned = 0.0244746 Jy ! Total flux subtracted in 200 components = 0.0244746 Jy ! Clean residual min=-0.022187 max=0.025468 Jy/beam ! Clean residual mean=-0.000002 rms=0.005519 Jy/beam ! Combined flux in latest and established models = 0.524202 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.524202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105327Jy sigma=0.780564 ! Fit after self-cal, rms=0.105272Jy sigma=0.780204 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8657 x 1.571 at 19.33 degrees (North through East) ! Clean map min=-0.020736 max=0.49176 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.11 HN 1.01 KP 1.02 ! LA 0.90 MK 1.08 NL 1.17 OV 0.89 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.11 HN 1.01 KP 1.03 ! LA 0.91 MK 1.05 NL 1.17 OV 0.90 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.11 HN 1.00 KP 1.04 ! LA 0.89 MK 1.07 NL 1.15 OV 0.91 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.12 HN 1.00 KP 1.04 ! LA 0.89 MK 1.06 NL 1.16 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.11 HN 1.02 KP 1.04 ! LA 0.90 MK 1.09 NL 1.14 OV 0.89 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 1.00 KP 1.03 ! LA 0.90 MK 1.06 NL 1.16 OV 0.89 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.12 HN 1.00 KP 1.02 ! LA 0.90 MK 1.07 NL 1.16 OV 0.89 ! SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.11 HN 0.99 KP 1.03 ! LA 0.90 MK 1.07 NL 1.15 OV 0.90 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.10 HN 0.99 KP 1.04 ! LA 0.90 MK 1.07 NL 1.16 OV 0.89 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.11 HN 1.01 KP 1.04 ! LA 0.89 MK 1.08 NL 1.15 OV 0.89 ! SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.10 HN 1.01 KP 1.04 ! LA 0.91 MK 1.08 NL 1.16 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.11 HN 0.99 KP 1.03 ! LA 0.89 MK 1.09 NL 1.17 OV 0.89 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.105272Jy sigma=0.780204 ! Fit after self-cal, rms=0.090561Jy sigma=0.650029 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=1.571 mas, bpa=19.96 degrees ! Estimated noise=0.812551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00593155 Jy ! Component: 100 - total flux cleaned = -0.00617336 Jy ! Component: 150 - total flux cleaned = -0.0064819 Jy ! Component: 200 - total flux cleaned = -0.00648183 Jy ! Total flux subtracted in 200 components = -0.00648183 Jy ! Clean residual min=-0.016308 max=0.016047 Jy/beam ! Clean residual mean=-0.000009 rms=0.004286 Jy/beam ! Combined flux in latest and established models = 0.51772 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.51772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089952Jy sigma=0.645439 ! Fit after self-cal, rms=0.089962Jy sigma=0.644976 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089962Jy sigma=0.644976 ! Fit after self-cal, rms=0.064672Jy sigma=0.423949 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=1.577 mas, bpa=19.84 degrees ! Estimated noise=0.812719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344849 Jy ! Component: 100 - total flux cleaned = 0.00322272 Jy ! Component: 150 - total flux cleaned = 0.00304547 Jy ! Component: 200 - total flux cleaned = 0.00290123 Jy ! Total flux subtracted in 200 components = 0.00290123 Jy ! Clean residual min=-0.003554 max=0.005169 Jy/beam ! Clean residual mean=-0.000001 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.520621 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.520621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064245Jy sigma=0.420830 ! Fit after self-cal, rms=0.064525Jy sigma=0.420480 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192074 Jy ! Component: 100 - total flux cleaned = 0.000807128 Jy ! Component: 150 - total flux cleaned = 7.45532e-05 Jy ! Component: 200 - total flux cleaned = -0.000389733 Jy ! Total flux subtracted in 200 components = -0.000389733 Jy ! Clean residual min=-0.003413 max=0.003975 Jy/beam ! Clean residual mean=-0.000001 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.520231 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.520231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064146Jy sigma=0.417314 ! Fit after self-cal, rms=0.064109Jy sigma=0.417098 ! Inverting map ! Added new window around map position (6.4, -12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020225 Jy ! Component: 100 - total flux cleaned = 0.00234961 Jy ! Component: 150 - total flux cleaned = 0.00262095 Jy ! Component: 200 - total flux cleaned = 0.00261993 Jy ! Total flux subtracted in 200 components = 0.00261993 Jy ! Clean residual min=-0.003047 max=0.003801 Jy/beam ! Clean residual mean=-0.000000 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.522851 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.522851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063862Jy sigma=0.415318 ! Fit after self-cal, rms=0.063850Jy sigma=0.415219 ! Inverting map ! Added new window around map position (2.8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334386 Jy ! Component: 100 - total flux cleaned = 0.00480956 Jy ! Component: 150 - total flux cleaned = 0.0055211 Jy ! Component: 200 - total flux cleaned = 0.00573248 Jy ! Total flux subtracted in 200 components = 0.00573248 Jy ! Clean residual min=-0.002895 max=0.003048 Jy/beam ! Clean residual mean=0.000000 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.528584 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.528584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063570Jy sigma=0.412854 ! Fit after self-cal, rms=0.063543Jy sigma=0.412694 ! Inverting map ! Added new window around map position (11, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021593 Jy ! Component: 100 - total flux cleaned = 0.00274735 Jy ! Component: 150 - total flux cleaned = 0.00281209 Jy ! Component: 200 - total flux cleaned = 0.0026976 Jy ! Total flux subtracted in 200 components = 0.0026976 Jy ! Clean residual min=-0.002476 max=0.002601 Jy/beam ! Clean residual mean=-0.000000 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.531281 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.531281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063362Jy sigma=0.411370 ! Fit after self-cal, rms=0.063354Jy sigma=0.411322 ! Inverting map ! Added new window around map position (-7.2, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154639 Jy ! Component: 100 - total flux cleaned = 0.0014033 Jy ! Component: 150 - total flux cleaned = 0.0014664 Jy ! Component: 200 - total flux cleaned = 0.00152506 Jy ! Total flux subtracted in 200 components = 0.00152506 Jy ! Clean residual min=-0.002244 max=0.002258 Jy/beam ! Clean residual mean=0.000000 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.532806 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.532806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063212Jy sigma=0.410197 ! Fit after self-cal, rms=0.063208Jy sigma=0.410160 ! Inverting map ! Added new window around map position (17.6, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016028 Jy ! Component: 100 - total flux cleaned = 0.00194273 Jy ! Component: 150 - total flux cleaned = 0.00204447 Jy ! Component: 200 - total flux cleaned = 0.00213934 Jy ! Total flux subtracted in 200 components = 0.00213934 Jy ! Clean residual min=-0.002101 max=0.002114 Jy/beam ! Clean residual mean=0.000000 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.534946 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 137 components and 0.534946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063107Jy sigma=0.409321 ! Fit after self-cal, rms=0.063100Jy sigma=0.409287 ! Inverting map ! Added new window around map position (5.2, 19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000651117 Jy ! Component: 100 - total flux cleaned = 0.00108247 Jy ! Component: 150 - total flux cleaned = 0.00132162 Jy ! Component: 200 - total flux cleaned = 0.00145342 Jy ! Total flux subtracted in 200 components = 0.00145342 Jy ! Clean residual min=-0.001967 max=0.001945 Jy/beam ! Clean residual mean=0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.536399 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 152 components and 0.536399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062999Jy sigma=0.408575 ! Fit after self-cal, rms=0.062996Jy sigma=0.408550 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062996Jy sigma=0.408550 ! Fit after self-cal, rms=0.063075Jy sigma=0.407885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8673 mas, bmaj=1.577 mas, bpa=19.88 degrees ! Estimated noise=0.812868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148904 Jy ! Component: 100 - total flux cleaned = 0.00231275 Jy ! Component: 150 - total flux cleaned = 0.00256376 Jy ! Component: 200 - total flux cleaned = 0.00283764 Jy ! Total flux subtracted in 200 components = 0.00283764 Jy ! Clean residual min=-0.001696 max=0.001733 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.539237 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 173 components and 0.539237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063012Jy sigma=0.407405 ! Fit after self-cal, rms=0.063013Jy sigma=0.407399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083123 Jy ! Component: 100 - total flux cleaned = 0.000916798 Jy ! Component: 150 - total flux cleaned = 0.00110462 Jy ! Component: 200 - total flux cleaned = 0.00113722 Jy ! Total flux subtracted in 200 components = 0.00113722 Jy ! Clean residual min=-0.001594 max=0.001517 Jy/beam ! Clean residual mean=0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.540374 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 189 components and 0.540374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062952Jy sigma=0.406907 ! Fit after self-cal, rms=0.062949Jy sigma=0.406891 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062949Jy sigma=0.406891 ! Fit after self-cal, rms=0.062981Jy sigma=0.406811 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=2.334 mas, bpa=26.8 degrees ! Estimated noise=1.07682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645728 Jy ! Component: 100 - total flux cleaned = 0.00103634 Jy ! Component: 150 - total flux cleaned = 0.00131372 Jy ! Component: 200 - total flux cleaned = 0.00151002 Jy ! Total flux subtracted in 200 components = 0.00151002 Jy ! Clean residual min=-0.001356 max=0.001383 Jy/beam ! Clean residual mean=0.000003 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.541884 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 209 components and 0.541884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062960Jy sigma=0.406642 ! Fit after self-cal, rms=0.062960Jy sigma=0.406633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206582 Jy ! Component: 100 - total flux cleaned = 0.000256841 Jy ! Component: 150 - total flux cleaned = 0.000257948 Jy ! Component: 200 - total flux cleaned = 0.000212503 Jy ! Total flux subtracted in 200 components = 0.000212503 Jy ! Clean residual min=-0.001286 max=0.001365 Jy/beam ! Clean residual mean=0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.542097 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 222 components and 0.542096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062950Jy sigma=0.406555 ! Fit after self-cal, rms=0.062950Jy sigma=0.406552 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8666 mas, bmaj=1.577 mas, bpa=19.9 degrees ! Estimated noise=0.813181 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8666 x 1.577 at 19.9 degrees (North through East) ! Clean map min=-0.0031422 max=0.49264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.681 mas, bmaj=1.367 mas, bpa=20.37 degrees ! Estimated noise=1.39469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.374934 Jy ! Component: 100 - total flux cleaned = 0.460038 Jy ! Component: 150 - total flux cleaned = 0.493175 Jy ! Component: 200 - total flux cleaned = 0.508477 Jy ! Total flux subtracted in 200 components = 0.508477 Jy ! Clean residual min=-0.008049 max=0.007880 Jy/beam ! Clean residual mean=-0.000000 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.508477 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.508477 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8666 mas, bmaj=1.577 mas, bpa=19.9 degrees ! Estimated noise=0.813181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00905163 Jy ! Component: 100 - total flux cleaned = 0.0120391 Jy ! Component: 150 - total flux cleaned = 0.0152263 Jy ! Component: 200 - total flux cleaned = 0.0179011 Jy ! Total flux subtracted in 200 components = 0.0179011 Jy ! Clean residual min=-0.003435 max=0.004210 Jy/beam ! Clean residual mean=0.000000 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.526378 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.526378 Jy ! Inverting map ! Added new window around map position (3.4, -25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270851 Jy ! Component: 100 - total flux cleaned = 0.00477526 Jy ! Component: 150 - total flux cleaned = 0.00638987 Jy ! Component: 200 - total flux cleaned = 0.00776108 Jy ! Total flux subtracted in 200 components = 0.00776108 Jy ! Clean residual min=-0.002779 max=0.003130 Jy/beam ! Clean residual mean=0.000000 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.53414 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 0.53414 Jy ! Inverting map ! Added new window around map position (-10.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228398 Jy ! Component: 100 - total flux cleaned = 0.0026729 Jy ! Component: 150 - total flux cleaned = 0.00276396 Jy ! Component: 200 - total flux cleaned = 0.00302316 Jy ! Total flux subtracted in 200 components = 0.00302316 Jy ! Clean residual min=-0.002361 max=0.002419 Jy/beam ! Clean residual mean=0.000000 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.537163 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 70 components and 0.537163 Jy ! Inverting map ! Added new window around map position (-6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101782 Jy ! Component: 100 - total flux cleaned = 0.000936868 Jy ! Component: 150 - total flux cleaned = 0.00094233 Jy ! Component: 200 - total flux cleaned = 0.00108704 Jy ! Total flux subtracted in 200 components = 0.00108704 Jy ! Clean residual min=-0.002044 max=0.002213 Jy/beam ! Clean residual mean=0.000000 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.53825 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 85 components and 0.53825 Jy ! Inverting map ! Added new window around map position (-25, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101562 Jy ! Component: 100 - total flux cleaned = 0.000951549 Jy ! Component: 150 - total flux cleaned = 0.00094966 Jy ! Component: 200 - total flux cleaned = 0.000827401 Jy ! Total flux subtracted in 200 components = 0.000827401 Jy ! Clean residual min=-0.001962 max=0.001761 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.539077 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 99 components and 0.539077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=2.334 mas, bpa=26.8 degrees ! Estimated noise=1.07682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162757 Jy ! Component: 100 - total flux cleaned = 0.00250802 Jy ! Component: 150 - total flux cleaned = 0.00331869 Jy ! Component: 200 - total flux cleaned = 0.00384794 Jy ! Total flux subtracted in 200 components = 0.00384794 Jy ! Clean residual min=-0.001804 max=0.001716 Jy/beam ! Clean residual mean=0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.542925 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017552 Jy ! Component: 100 - total flux cleaned = 0.00038475 Jy ! Component: 150 - total flux cleaned = 0.000501408 Jy ! Component: 200 - total flux cleaned = 0.000538187 Jy ! Total flux subtracted in 200 components = 0.000538187 Jy ! Clean residual min=-0.001641 max=0.001539 Jy/beam ! Clean residual mean=0.000002 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.543463 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 138 components and 0.543463 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8666 mas, bmaj=1.577 mas, bpa=19.9 degrees ! Estimated noise=0.813181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000481798 Jy ! Component: 100 - total flux cleaned = -0.000955337 Jy ! Component: 150 - total flux cleaned = -0.00120163 Jy ! Component: 200 - total flux cleaned = -0.00148261 Jy ! Total flux subtracted in 200 components = -0.00148261 Jy ! Clean residual min=-0.001663 max=0.001417 Jy/beam ! Clean residual mean=0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.54198 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 154 components and 0.54198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062993Jy sigma=0.406896 ! Fit after self-cal, rms=0.062969Jy sigma=0.406684 wmodel J0929+5013_X_map.mod ! Writing 154 model components to file: J0929+5013_X_map.mod wobs J0929+5013_X_uvs.fits ! Writing UV FITS file: J0929+5013_X_uvs.fits wwins J0929+5013_X_map.win ! wwins: Wrote 13 windows to J0929+5013_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224388 Jy ! Component: 100 - total flux cleaned = -0.000174337 Jy ! Component: 150 - total flux cleaned = -0.000125542 Jy ! Component: 200 - total flux cleaned = -0.000102036 Jy ! Component: 250 - total flux cleaned = -0.00010176 Jy ! Component: 300 - total flux cleaned = -0.000101221 Jy ! Component: 350 - total flux cleaned = -7.91203e-05 Jy ! Component: 400 - total flux cleaned = 4.85244e-05 Jy ! Component: 450 - total flux cleaned = 0.000110447 Jy ! Component: 500 - total flux cleaned = 0.000232399 Jy ! Component: 550 - total flux cleaned = 0.000411795 Jy ! Component: 600 - total flux cleaned = 0.000548636 Jy ! Component: 650 - total flux cleaned = 0.000663498 Jy ! Component: 700 - total flux cleaned = 0.000720209 Jy ! Component: 750 - total flux cleaned = 0.000776279 Jy ! Component: 800 - total flux cleaned = 0.000831677 Jy ! Component: 850 - total flux cleaned = 0.000922273 Jy ! Component: 900 - total flux cleaned = 0.00101147 Jy ! Component: 950 - total flux cleaned = 0.0010818 Jy ! Component: 1000 - total flux cleaned = 0.00113373 Jy ! Component: 1050 - total flux cleaned = 0.00127056 Jy ! Component: 1100 - total flux cleaned = 0.00132096 Jy ! Component: 1150 - total flux cleaned = 0.00140391 Jy ! Component: 1200 - total flux cleaned = 0.00151853 Jy ! Component: 1250 - total flux cleaned = 0.00158299 Jy ! Component: 1300 - total flux cleaned = 0.00169483 Jy ! Component: 1350 - total flux cleaned = 0.0017579 Jy ! Component: 1400 - total flux cleaned = 0.00185152 Jy ! Component: 1450 - total flux cleaned = 0.00189787 Jy ! Component: 1500 - total flux cleaned = 0.00200429 Jy ! Component: 1550 - total flux cleaned = 0.00209474 Jy ! Component: 1600 - total flux cleaned = 0.00216929 Jy ! Component: 1650 - total flux cleaned = 0.00225795 Jy ! Component: 1700 - total flux cleaned = 0.00228713 Jy ! Component: 1750 - total flux cleaned = 0.00241727 Jy ! Component: 1800 - total flux cleaned = 0.00241725 Jy ! Component: 1850 - total flux cleaned = 0.002545 Jy ! Component: 1900 - total flux cleaned = 0.0026152 Jy ! Component: 1950 - total flux cleaned = 0.00268474 Jy ! Component: 2000 - total flux cleaned = 0.0027813 Jy ! Component: 2050 - total flux cleaned = 0.00284958 Jy ! Component: 2100 - total flux cleaned = 0.00294434 Jy ! Component: 2150 - total flux cleaned = 0.00297099 Jy ! Component: 2200 - total flux cleaned = 0.00302436 Jy ! Component: 2250 - total flux cleaned = 0.00311679 Jy ! Component: 2300 - total flux cleaned = 0.00315618 Jy ! Component: 2350 - total flux cleaned = 0.00322134 Jy ! Component: 2400 - total flux cleaned = 0.00328585 Jy ! Component: 2450 - total flux cleaned = 0.0033114 Jy ! Component: 2500 - total flux cleaned = 0.00336223 Jy ! Component: 2550 - total flux cleaned = 0.00342526 Jy ! Component: 2600 - total flux cleaned = 0.00352513 Jy ! Component: 2650 - total flux cleaned = 0.00352507 Jy ! Component: 2700 - total flux cleaned = 0.00357429 Jy ! Component: 2750 - total flux cleaned = 0.00363538 Jy ! Component: 2800 - total flux cleaned = 0.00364754 Jy ! Component: 2850 - total flux cleaned = 0.00368375 Jy ! Component: 2900 - total flux cleaned = 0.00371965 Jy ! Component: 2950 - total flux cleaned = 0.00374347 Jy ! Component: 3000 - total flux cleaned = 0.00379061 Jy ! Component: 3050 - total flux cleaned = 0.00381392 Jy ! Component: 3100 - total flux cleaned = 0.00384882 Jy ! Component: 3150 - total flux cleaned = 0.00381416 Jy ! Component: 3200 - total flux cleaned = 0.00389442 Jy ! Component: 3250 - total flux cleaned = 0.00389437 Jy ! Component: 3300 - total flux cleaned = 0.00390569 Jy ! Component: 3350 - total flux cleaned = 0.0039842 Jy ! Component: 3400 - total flux cleaned = 0.003973 Jy ! Component: 3450 - total flux cleaned = 0.00399512 Jy ! Component: 3500 - total flux cleaned = 0.00399507 Jy ! Component: 3550 - total flux cleaned = 0.00402785 Jy ! Component: 3600 - total flux cleaned = 0.00404955 Jy ! Component: 3650 - total flux cleaned = 0.004028 Jy ! Component: 3700 - total flux cleaned = 0.0040709 Jy ! Component: 3750 - total flux cleaned = 0.00406029 Jy ! Component: 3800 - total flux cleaned = 0.00406036 Jy ! Component: 3850 - total flux cleaned = 0.00407086 Jy ! Component: 3900 - total flux cleaned = 0.00409163 Jy ! Component: 3950 - total flux cleaned = 0.00408125 Jy ! Component: 4000 - total flux cleaned = 0.00409153 Jy ! Component: 4050 - total flux cleaned = 0.00412249 Jy ! Total flux subtracted in 4096 components = 0.00409186 Jy ! Clean residual min=-0.000689 max=0.000717 Jy/beam ! Clean residual mean=0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.546072 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 466 components and 0.546072 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0929+5013_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8666 x 1.577 at 19.9 degrees (North through East) ! Clean map min=-0.0023146 max=0.49201 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0929+5013_X_map.fits wmodel /image_prod/ug002_uva//J0929+5013_X_map.mod ! Writing 466 model components to file: /image_prod/ug002_uva//J0929+5013_X_map.mod wobs /image_prod/ug002_uva//J0929+5013_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0929+5013_X_uvs.fits wwins /image_prod/ug002_uva//J0929+5013_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J0929+5013_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.492008 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172665 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.105282 0.105282 0.210563 0.421127 0.842253 1.68451 3.36901 6.73803 13.4761 26.9521 53.9042 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.492 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2849.5 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0929+5013_X_dfm.log closed on Wed Mar 4 23:02:39 2020