! Started logfile: /image_prod/ug002_uva//J0927-2034_X_g_dfm.log on Wed Mar 4 23:01:26 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0927-2034_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0927-2034_X_g_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.909722 visibilities/baseline/integration-bin. ! Found source: J0927-2034 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6288 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0927-2034_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.210347Jy sigma=8.117292 ! Fit after self-cal, rms=0.401912Jy sigma=2.778091 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5857 mas, bmaj=1.591 mas, bpa=-5.047 degrees ! Estimated noise=1.85881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.458351 Jy ! Component: 100 - total flux cleaned = 0.588419 Jy ! Total flux subtracted in 100 components = 0.588419 Jy ! Clean residual min=-0.035317 max=0.056907 Jy/beam ! Clean residual mean=-0.000081 rms=0.007575 Jy/beam ! Combined flux in latest and established models = 0.588419 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.588419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189167Jy sigma=1.218084 ! Fit after self-cal, rms=0.187424Jy sigma=1.206390 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675337 Jy ! Component: 100 - total flux cleaned = 0.108476 Jy ! Total flux subtracted in 100 components = 0.108476 Jy ! Clean residual min=-0.026348 max=0.033418 Jy/beam ! Clean residual mean=-0.000055 rms=0.005470 Jy/beam ! Combined flux in latest and established models = 0.696895 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.696895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141111Jy sigma=0.908200 ! Fit after self-cal, rms=0.140485Jy sigma=0.904000 ! Inverting map ! Added new window around map position (-0.8, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352997 Jy ! Component: 100 - total flux cleaned = 0.0566456 Jy ! Total flux subtracted in 100 components = 0.0566456 Jy ! Clean residual min=-0.023854 max=0.030433 Jy/beam ! Clean residual mean=-0.000041 rms=0.004740 Jy/beam ! Combined flux in latest and established models = 0.753541 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.753541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124447Jy sigma=0.800595 ! Fit after self-cal, rms=0.123425Jy sigma=0.793658 ! Inverting map ! Added new window around map position (-1.6, -3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260017 Jy ! Component: 100 - total flux cleaned = 0.0419401 Jy ! Total flux subtracted in 100 components = 0.0419401 Jy ! Clean residual min=-0.018754 max=0.020873 Jy/beam ! Clean residual mean=-0.000035 rms=0.004165 Jy/beam ! Combined flux in latest and established models = 0.795481 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.795481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116345Jy sigma=0.745907 ! Fit after self-cal, rms=0.115936Jy sigma=0.743002 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7302 mas, bmaj=1.843 mas, bpa=-4.186 degrees ! Estimated noise=1.36565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238094 Jy ! Component: 100 - total flux cleaned = 0.039506 Jy ! Component: 150 - total flux cleaned = 0.0510794 Jy ! Component: 200 - total flux cleaned = 0.0561852 Jy ! Total flux subtracted in 200 components = 0.0561852 Jy ! Clean residual min=-0.024731 max=0.026922 Jy/beam ! Clean residual mean=-0.000059 rms=0.005724 Jy/beam ! Combined flux in latest and established models = 0.851666 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 0.851666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109507Jy sigma=0.701685 ! Fit after self-cal, rms=0.109256Jy sigma=0.699394 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7302 x 1.843 at -4.186 degrees (North through East) ! Clean map min=-0.023182 max=0.59949 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.04 KP 1.06 ! LA 0.87 MK 0.97 NL 1.15 OV 0.90 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.05 KP 1.05 ! LA 0.87 MK 1.00 NL 1.14 OV 0.91 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.04 KP 1.08 ! LA 0.88 MK 0.98 NL 1.13 OV 0.91 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.06 KP 1.07 ! LA 0.87 MK 0.99 NL 1.14 OV 0.91 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.05 KP 1.06 ! LA 0.87 MK 1.00 NL 1.13 OV 0.90 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.04 KP 1.05 ! LA 0.87 MK 0.99 NL 1.13 OV 0.89 ! SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.04 KP 1.07 ! LA 0.87 MK 0.99 NL 1.13 OV 0.90 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.05 KP 1.04 ! LA 0.86 MK 1.01 NL 1.16 OV 0.91 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.02 KP 1.09 ! LA 0.88 MK 1.00 NL 1.14 OV 0.90 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.06 KP 1.07 ! LA 0.86 MK 1.01 NL 1.13 OV 0.91 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.04 KP 1.07 ! LA 0.89 MK 1.00 NL 1.12 OV 0.90 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.05 KP 1.05 ! LA 0.87 MK 1.01 NL 1.16 OV 0.90 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.109256Jy sigma=0.699394 ! Fit after self-cal, rms=0.077774Jy sigma=0.503986 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7328 mas, bmaj=1.848 mas, bpa=-4 degrees ! Estimated noise=1.36791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00365329 Jy ! Component: 100 - total flux cleaned = -0.00624914 Jy ! Component: 150 - total flux cleaned = -0.00798237 Jy ! Component: 200 - total flux cleaned = -0.00863542 Jy ! Total flux subtracted in 200 components = -0.00863542 Jy ! Clean residual min=-0.011530 max=0.011074 Jy/beam ! Clean residual mean=-0.000020 rms=0.002567 Jy/beam ! Combined flux in latest and established models = 0.843031 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.843031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075890Jy sigma=0.491304 ! Fit after self-cal, rms=0.075686Jy sigma=0.489794 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075686Jy sigma=0.489794 ! Fit after self-cal, rms=0.068378Jy sigma=0.440048 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7325 mas, bmaj=1.85 mas, bpa=-4.05 degrees ! Estimated noise=1.37163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170866 Jy ! Component: 100 - total flux cleaned = -0.00291732 Jy ! Component: 150 - total flux cleaned = -0.00351158 Jy ! Component: 200 - total flux cleaned = -0.00418038 Jy ! Total flux subtracted in 200 components = -0.00418038 Jy ! Clean residual min=-0.006497 max=0.005366 Jy/beam ! Clean residual mean=-0.000012 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.83885 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.83885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067711Jy sigma=0.435655 ! Fit after self-cal, rms=0.067581Jy sigma=0.435022 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000311765 Jy ! Component: 100 - total flux cleaned = -0.000853488 Jy ! Component: 150 - total flux cleaned = -0.00131728 Jy ! Component: 200 - total flux cleaned = -0.00165992 Jy ! Total flux subtracted in 200 components = -0.00165992 Jy ! Clean residual min=-0.005955 max=0.004998 Jy/beam ! Clean residual mean=-0.000012 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.837191 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.837191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067372Jy sigma=0.433575 ! Fit after self-cal, rms=0.067325Jy sigma=0.433356 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067325Jy sigma=0.433356 ! Fit after self-cal, rms=0.066683Jy sigma=0.428608 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7326 mas, bmaj=1.849 mas, bpa=-4.041 degrees ! Estimated noise=1.37234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111528 Jy ! Component: 100 - total flux cleaned = -0.00208844 Jy ! Component: 150 - total flux cleaned = -0.00281464 Jy ! Component: 200 - total flux cleaned = -0.00337215 Jy ! Total flux subtracted in 200 components = -0.00337215 Jy ! Clean residual min=-0.005086 max=0.004930 Jy/beam ! Clean residual mean=-0.000008 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.833818 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 0.833818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066431Jy sigma=0.426918 ! Fit after self-cal, rms=0.066387Jy sigma=0.426688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340719 Jy ! Component: 100 - total flux cleaned = -0.000820427 Jy ! Component: 150 - total flux cleaned = -0.000997956 Jy ! Component: 200 - total flux cleaned = -0.00121506 Jy ! Total flux subtracted in 200 components = -0.00121506 Jy ! Clean residual min=-0.004814 max=0.004795 Jy/beam ! Clean residual mean=-0.000008 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.832603 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.832603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066267Jy sigma=0.425837 ! Fit after self-cal, rms=0.066240Jy sigma=0.425703 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066240Jy sigma=0.425703 ! Fit after self-cal, rms=0.066238Jy sigma=0.425415 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.952 mas, bmaj=3.975 mas, bpa=1.005 degrees ! Estimated noise=1.99452 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126359 Jy ! Component: 100 - total flux cleaned = -0.00134305 Jy ! Component: 150 - total flux cleaned = -0.00128999 Jy ! Component: 200 - total flux cleaned = -0.00129179 Jy ! Total flux subtracted in 200 components = -0.00129179 Jy ! Clean residual min=-0.004491 max=0.005369 Jy/beam ! Clean residual mean=-0.000018 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.831312 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.831312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066163Jy sigma=0.425126 ! Fit after self-cal, rms=0.066150Jy sigma=0.425045 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.8724e-06 Jy ! Component: 100 - total flux cleaned = -9.14474e-05 Jy ! Component: 150 - total flux cleaned = -9.39963e-05 Jy ! Component: 200 - total flux cleaned = -5.63635e-05 Jy ! Total flux subtracted in 200 components = -5.63635e-05 Jy ! Clean residual min=-0.004395 max=0.005282 Jy/beam ! Clean residual mean=-0.000019 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.831255 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.831255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066149Jy sigma=0.425136 ! Fit after self-cal, rms=0.066142Jy sigma=0.425054 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7327 mas, bmaj=1.848 mas, bpa=-4.031 degrees ! Estimated noise=1.37287 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7327 x 1.848 at -4.031 degrees (North through East) ! Clean map min=-0.0041112 max=0.59659 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066142Jy sigma=0.425054 ! Fit after self-cal, rms=0.062495Jy sigma=0.393838 ! Inverting map and beam ! Estimated beam: bmin=0.7328 mas, bmaj=1.849 mas, bpa=-4.098 degrees ! Estimated noise=1.37415 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497721 Jy ! Component: 100 - total flux cleaned = -0.00063775 Jy ! Component: 150 - total flux cleaned = -0.000699641 Jy ! Component: 200 - total flux cleaned = -0.000813349 Jy ! Total flux subtracted in 200 components = -0.000813349 Jy ! Clean residual min=-0.004280 max=0.004332 Jy/beam ! Clean residual mean=-0.000006 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.830442 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.830442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062364Jy sigma=0.392893 ! Fit after self-cal, rms=0.062346Jy sigma=0.392822 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166605 Jy ! Component: 100 - total flux cleaned = -0.000165927 Jy ! Component: 150 - total flux cleaned = -0.000263255 Jy ! Component: 200 - total flux cleaned = -0.000262916 Jy ! Total flux subtracted in 200 components = -0.000262916 Jy ! Clean residual min=-0.004056 max=0.004292 Jy/beam ! Clean residual mean=-0.000006 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.830179 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.830179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062267Jy sigma=0.392266 ! Fit after self-cal, rms=0.062253Jy sigma=0.392200 ! Inverting map ! Added new window around map position (-1, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370142 Jy ! Component: 100 - total flux cleaned = 0.00380511 Jy ! Component: 150 - total flux cleaned = 0.00366741 Jy ! Component: 200 - total flux cleaned = 0.00354182 Jy ! Total flux subtracted in 200 components = 0.00354182 Jy ! Clean residual min=-0.003444 max=0.003133 Jy/beam ! Clean residual mean=-0.000005 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.833721 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 0.833721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061963Jy sigma=0.390289 ! Fit after self-cal, rms=0.061957Jy sigma=0.390235 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061957Jy sigma=0.390235 ! Fit after self-cal, rms=0.061926Jy sigma=0.390079 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5861 mas, bmaj=1.591 mas, bpa=-4.734 degrees ! Estimated noise=1.88378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.463185 Jy ! Component: 100 - total flux cleaned = 0.610532 Jy ! Component: 150 - total flux cleaned = 0.678488 Jy ! Component: 200 - total flux cleaned = 0.720049 Jy ! Total flux subtracted in 200 components = 0.720049 Jy ! Clean residual min=-0.009891 max=0.022553 Jy/beam ! Clean residual mean=-0.000030 rms=0.002821 Jy/beam ! Combined flux in latest and established models = 0.720049 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.720049 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.848 mas, bpa=-4.066 degrees ! Estimated noise=1.37401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423534 Jy ! Component: 100 - total flux cleaned = 0.0666682 Jy ! Component: 150 - total flux cleaned = 0.0812408 Jy ! Component: 200 - total flux cleaned = 0.0902252 Jy ! Total flux subtracted in 200 components = 0.0902252 Jy ! Clean residual min=-0.004704 max=0.005387 Jy/beam ! Clean residual mean=-0.000017 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.810274 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 57 components and 0.810274 Jy ! Inverting map ! Added new window around map position (-1, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627673 Jy ! Component: 100 - total flux cleaned = 0.0109534 Jy ! Component: 150 - total flux cleaned = 0.0147088 Jy ! Component: 200 - total flux cleaned = 0.0171986 Jy ! Total flux subtracted in 200 components = 0.0171986 Jy ! Clean residual min=-0.003540 max=0.003617 Jy/beam ! Clean residual mean=-0.000011 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.827473 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 80 components and 0.827472 Jy ! Inverting map ! Added new window around map position (23.6, 38.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308293 Jy ! Component: 100 - total flux cleaned = 0.00451573 Jy ! Component: 150 - total flux cleaned = 0.00553108 Jy ! Component: 200 - total flux cleaned = 0.00629121 Jy ! Total flux subtracted in 200 components = 0.00629121 Jy ! Clean residual min=-0.003107 max=0.002885 Jy/beam ! Clean residual mean=-0.000010 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.833764 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 98 components and 0.833764 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.954 mas, bmaj=3.978 mas, bpa=1.012 degrees ! Estimated noise=1.99433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235902 Jy ! Component: 100 - total flux cleaned = 0.00366012 Jy ! Component: 150 - total flux cleaned = 0.00467395 Jy ! Component: 200 - total flux cleaned = 0.0055495 Jy ! Total flux subtracted in 200 components = 0.0055495 Jy ! Clean residual min=-0.003278 max=0.003432 Jy/beam ! Clean residual mean=-0.000017 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.839313 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765328 Jy ! Component: 100 - total flux cleaned = 0.00147912 Jy ! Component: 150 - total flux cleaned = 0.00199446 Jy ! Component: 200 - total flux cleaned = 0.00249472 Jy ! Total flux subtracted in 200 components = 0.00249472 Jy ! Clean residual min=-0.003122 max=0.003197 Jy/beam ! Clean residual mean=-0.000015 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.841808 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 118 components and 0.841808 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.848 mas, bpa=-4.066 degrees ! Estimated noise=1.37401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221264 Jy ! Component: 100 - total flux cleaned = -0.000406718 Jy ! Component: 150 - total flux cleaned = -0.000352437 Jy ! Component: 200 - total flux cleaned = -0.00030096 Jy ! Total flux subtracted in 200 components = -0.00030096 Jy ! Clean residual min=-0.002730 max=0.002913 Jy/beam ! Clean residual mean=-0.000006 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.841507 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.841507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061571Jy sigma=0.387623 ! Fit after self-cal, rms=0.061501Jy sigma=0.387177 wmodel J0927-2034_X_g_map.mod ! Writing 135 model components to file: J0927-2034_X_g_map.mod wobs J0927-2034_X_g_uvs.fits ! Writing UV FITS file: J0927-2034_X_g_uvs.fits wwins J0927-2034_X_g_map.win ! wwins: Wrote 6 windows to J0927-2034_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.40943e-05 Jy ! Component: 100 - total flux cleaned = 0.0001422 Jy ! Component: 150 - total flux cleaned = 0.000185392 Jy ! Component: 200 - total flux cleaned = 0.000100338 Jy ! Component: 250 - total flux cleaned = 1.83864e-05 Jy ! Component: 300 - total flux cleaned = -0.000101336 Jy ! Component: 350 - total flux cleaned = -0.000218083 Jy ! Component: 400 - total flux cleaned = -0.000293583 Jy ! Component: 450 - total flux cleaned = -0.00040406 Jy ! Component: 500 - total flux cleaned = -0.000367623 Jy ! Component: 550 - total flux cleaned = -0.000510262 Jy ! Component: 600 - total flux cleaned = -0.00071921 Jy ! Component: 650 - total flux cleaned = -0.00082218 Jy ! Component: 700 - total flux cleaned = -0.000990727 Jy ! Component: 750 - total flux cleaned = -0.00118903 Jy ! Component: 800 - total flux cleaned = -0.0012864 Jy ! Component: 850 - total flux cleaned = -0.00141391 Jy ! Component: 900 - total flux cleaned = -0.00147638 Jy ! Component: 950 - total flux cleaned = -0.00156851 Jy ! Component: 1000 - total flux cleaned = -0.00150797 Jy ! Component: 1050 - total flux cleaned = -0.00168867 Jy ! Component: 1100 - total flux cleaned = -0.00162925 Jy ! Component: 1150 - total flux cleaned = -0.00168842 Jy ! Component: 1200 - total flux cleaned = -0.00183255 Jy ! Component: 1250 - total flux cleaned = -0.00186111 Jy ! Component: 1300 - total flux cleaned = -0.00194548 Jy ! Component: 1350 - total flux cleaned = -0.001973 Jy ! Component: 1400 - total flux cleaned = -0.00202842 Jy ! Component: 1450 - total flux cleaned = -0.00219065 Jy ! Component: 1500 - total flux cleaned = -0.00224349 Jy ! Component: 1550 - total flux cleaned = -0.00224327 Jy ! Component: 1600 - total flux cleaned = -0.00232125 Jy ! Component: 1650 - total flux cleaned = -0.00239849 Jy ! Component: 1700 - total flux cleaned = -0.00247477 Jy ! Component: 1750 - total flux cleaned = -0.00250017 Jy ! Component: 1800 - total flux cleaned = -0.00250044 Jy ! Component: 1850 - total flux cleaned = -0.00267315 Jy ! Component: 1900 - total flux cleaned = -0.00269742 Jy ! Component: 1950 - total flux cleaned = -0.00267356 Jy ! Component: 2000 - total flux cleaned = -0.00274509 Jy ! Component: 2050 - total flux cleaned = -0.00281615 Jy ! Component: 2100 - total flux cleaned = -0.00283935 Jy ! Component: 2150 - total flux cleaned = -0.00286244 Jy ! Component: 2200 - total flux cleaned = -0.00293105 Jy ! Component: 2250 - total flux cleaned = -0.00288553 Jy ! Component: 2300 - total flux cleaned = -0.00290819 Jy ! Component: 2350 - total flux cleaned = -0.00295248 Jy ! Component: 2400 - total flux cleaned = -0.00290864 Jy ! Component: 2450 - total flux cleaned = -0.00288705 Jy ! Component: 2500 - total flux cleaned = -0.00297411 Jy ! Component: 2550 - total flux cleaned = -0.00295271 Jy ! Component: 2600 - total flux cleaned = -0.00305881 Jy ! Component: 2650 - total flux cleaned = -0.00305892 Jy ! Component: 2700 - total flux cleaned = -0.00312131 Jy ! Component: 2750 - total flux cleaned = -0.00310089 Jy ! Component: 2800 - total flux cleaned = -0.00312133 Jy ! Component: 2850 - total flux cleaned = -0.00318227 Jy ! Component: 2900 - total flux cleaned = -0.00322284 Jy ! Component: 2950 - total flux cleaned = -0.00326266 Jy ! Component: 3000 - total flux cleaned = -0.00330234 Jy ! Component: 3050 - total flux cleaned = -0.00338092 Jy ! Component: 3100 - total flux cleaned = -0.00347818 Jy ! Component: 3150 - total flux cleaned = -0.00351674 Jy ! Component: 3200 - total flux cleaned = -0.00349757 Jy ! Component: 3250 - total flux cleaned = -0.00359282 Jy ! Component: 3300 - total flux cleaned = -0.00368718 Jy ! Component: 3350 - total flux cleaned = -0.00368741 Jy ! Component: 3400 - total flux cleaned = -0.00372443 Jy ! Component: 3450 - total flux cleaned = -0.0037612 Jy ! Component: 3500 - total flux cleaned = -0.00383421 Jy ! Component: 3550 - total flux cleaned = -0.00385255 Jy ! Component: 3600 - total flux cleaned = -0.00390652 Jy ! Component: 3650 - total flux cleaned = -0.00392444 Jy ! Component: 3700 - total flux cleaned = -0.00395988 Jy ! Component: 3750 - total flux cleaned = -0.0039952 Jy ! Component: 3800 - total flux cleaned = -0.00401288 Jy ! Component: 3850 - total flux cleaned = -0.00404764 Jy ! Component: 3900 - total flux cleaned = -0.00406481 Jy ! Component: 3950 - total flux cleaned = -0.00420206 Jy ! Component: 4000 - total flux cleaned = -0.00415092 Jy ! Component: 4050 - total flux cleaned = -0.00418482 Jy ! Total flux subtracted in 4096 components = -0.00418481 Jy ! Clean residual min=-0.001009 max=0.000972 Jy/beam ! Clean residual mean=-0.000002 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.837322 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 439 components and 0.837323 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0927-2034_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7329 x 1.848 at -4.066 degrees (North through East) ! Clean map min=-0.0018375 max=0.59832 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0927-2034_X_g_map.fits wmodel /image_prod/ug002_uva//J0927-2034_X_g_map.mod ! Writing 439 model components to file: /image_prod/ug002_uva//J0927-2034_X_g_map.mod wobs /image_prod/ug002_uva//J0927-2034_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0927-2034_X_g_uvs.fits wwins /image_prod/ug002_uva//J0927-2034_X_g_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0927-2034_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.598321 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000288113 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.144461 0.144461 0.288922 0.577843 1.15569 2.31137 4.62275 9.24549 18.491 36.982 73.9639 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.598 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2076.69 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0927-2034_X_g_dfm.log closed on Wed Mar 4 23:01:30 2020