! Started logfile: /image_prod/ug002_uva//J0925+0019_X_dfm.log on Wed Mar 4 22:58:56 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0925+0019_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0925+0019_X_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.711111 visibilities/baseline/integration-bin. ! Found source: J0925+0019 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 17280 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0925+0019_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.169615Jy sigma=8.267858 ! Fit after self-cal, rms=0.436842Jy sigma=3.203913 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7783 mas, bmaj=1.768 mas, bpa=4.101 degrees ! Estimated noise=1.24207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.437012 Jy ! Component: 100 - total flux cleaned = 0.570442 Jy ! Total flux subtracted in 100 components = 0.570442 Jy ! Clean residual min=-0.021189 max=0.054294 Jy/beam ! Clean residual mean=0.000008 rms=0.004792 Jy/beam ! Combined flux in latest and established models = 0.570442 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.570442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116302Jy sigma=0.769402 ! Fit after self-cal, rms=0.116227Jy sigma=0.768956 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538171 Jy ! Component: 100 - total flux cleaned = 0.0655449 Jy ! Total flux subtracted in 100 components = 0.0655449 Jy ! Clean residual min=-0.016753 max=0.023065 Jy/beam ! Clean residual mean=0.000001 rms=0.003538 Jy/beam ! Combined flux in latest and established models = 0.635987 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.635987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092596Jy sigma=0.626775 ! Fit after self-cal, rms=0.092543Jy sigma=0.626421 ! Inverting map ! Added new window around map position (1.2, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167693 Jy ! Component: 100 - total flux cleaned = 0.0231368 Jy ! Total flux subtracted in 100 components = 0.0231368 Jy ! Clean residual min=-0.015775 max=0.018670 Jy/beam ! Clean residual mean=-0.000001 rms=0.003190 Jy/beam ! Combined flux in latest and established models = 0.659124 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.659124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087812Jy sigma=0.594001 ! Fit after self-cal, rms=0.087503Jy sigma=0.591461 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9713 mas, bmaj=2.12 mas, bpa=3.637 degrees ! Estimated noise=0.772974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064452 Jy ! Component: 100 - total flux cleaned = 0.00699095 Jy ! Component: 150 - total flux cleaned = 0.00764675 Jy ! Component: 200 - total flux cleaned = 0.00783664 Jy ! Total flux subtracted in 200 components = 0.00783664 Jy ! Clean residual min=-0.015586 max=0.019220 Jy/beam ! Clean residual mean=-0.000004 rms=0.003712 Jy/beam ! Combined flux in latest and established models = 0.666961 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.666961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085754Jy sigma=0.578178 ! Fit after self-cal, rms=0.085648Jy sigma=0.577238 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9713 x 2.12 at 3.637 degrees (North through East) ! Clean map min=-0.015744 max=0.56734 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.99 KP 1.05 ! LA 1.06 MK 0.97 NL 1.13 OV 0.94 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 0.96 KP 1.04 ! LA 1.06 MK 0.98 NL 1.13 OV 0.94 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.96 KP 1.04 ! LA 1.08 MK 0.97 NL 1.12 OV 0.93 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.97 KP 1.05 ! LA 1.06 MK 0.99 NL 1.13 OV 0.95 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 0.96 KP 1.05 ! LA 1.07 MK 0.98 NL 1.13 OV 0.94 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.98 KP 1.06 ! LA 1.07 MK 0.99 NL 1.12 OV 0.95 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 0.95 KP 1.04 ! LA 1.07 MK 1.00 NL 1.12 OV 0.96 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 0.98 KP 1.06 ! LA 1.06 MK 0.98 NL 1.14 OV 0.94 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.98 KP 1.05 ! LA 1.06 MK 1.02 NL 1.14 OV 0.96 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.99 KP 1.04 ! LA 1.07 MK 1.00 NL 1.13 OV 0.96 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 0.97 KP 1.06 ! LA 1.07 MK 0.99 NL 1.12 OV 0.96 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 1.00 KP 1.06 ! LA 1.07 MK 0.99 NL 1.14 OV 0.96 ! PT 0.93 SC 0.98 ! ! ! Fit before self-cal, rms=0.085648Jy sigma=0.577238 ! Fit after self-cal, rms=0.065689Jy sigma=0.446038 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9641 mas, bmaj=2.116 mas, bpa=3.869 degrees ! Estimated noise=0.772134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00981281 Jy ! Component: 100 - total flux cleaned = -0.0112686 Jy ! Component: 150 - total flux cleaned = -0.0115541 Jy ! Component: 200 - total flux cleaned = -0.0119119 Jy ! Total flux subtracted in 200 components = -0.0119119 Jy ! Clean residual min=-0.007053 max=0.008409 Jy/beam ! Clean residual mean=-0.000003 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.655049 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 41 components and 0.655049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064073Jy sigma=0.435320 ! Fit after self-cal, rms=0.063905Jy sigma=0.434420 ! Inverting map ! Added new window around map position (-1.8, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00889422 Jy ! Component: 100 - total flux cleaned = 0.0151263 Jy ! Component: 150 - total flux cleaned = 0.019819 Jy ! Component: 200 - total flux cleaned = 0.0228724 Jy ! Total flux subtracted in 200 components = 0.0228724 Jy ! Clean residual min=-0.005877 max=0.005566 Jy/beam ! Clean residual mean=-0.000002 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.677921 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 74 components and 0.677921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062291Jy sigma=0.422422 ! Fit after self-cal, rms=0.062145Jy sigma=0.421567 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062145Jy sigma=0.421567 ! Fit after self-cal, rms=0.060724Jy sigma=0.411244 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9641 mas, bmaj=2.12 mas, bpa=3.976 degrees ! Estimated noise=0.772393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209669 Jy ! Component: 100 - total flux cleaned = -0.000758636 Jy ! Component: 150 - total flux cleaned = 0.000111065 Jy ! Component: 200 - total flux cleaned = 0.000749561 Jy ! Total flux subtracted in 200 components = 0.000749561 Jy ! Clean residual min=-0.003870 max=0.003872 Jy/beam ! Clean residual mean=-0.000001 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.678671 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.678671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060101Jy sigma=0.407058 ! Fit after self-cal, rms=0.060023Jy sigma=0.406606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513049 Jy ! Component: 100 - total flux cleaned = 0.00116371 Jy ! Component: 150 - total flux cleaned = 0.00158646 Jy ! Component: 200 - total flux cleaned = 0.00197047 Jy ! Total flux subtracted in 200 components = 0.00197047 Jy ! Clean residual min=-0.003549 max=0.003792 Jy/beam ! Clean residual mean=-0.000001 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.680641 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 92 components and 0.680641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059807Jy sigma=0.405191 ! Fit after self-cal, rms=0.059765Jy sigma=0.404955 ! Inverting map ! Added new window around map position (7.8, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232001 Jy ! Component: 100 - total flux cleaned = 0.0028825 Jy ! Component: 150 - total flux cleaned = 0.00328642 Jy ! Component: 200 - total flux cleaned = 0.00353089 Jy ! Total flux subtracted in 200 components = 0.00353089 Jy ! Clean residual min=-0.003196 max=0.002805 Jy/beam ! Clean residual mean=-0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.684172 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 0.684172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059516Jy sigma=0.403361 ! Fit after self-cal, rms=0.059491Jy sigma=0.403229 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059491Jy sigma=0.403229 ! Fit after self-cal, rms=0.059335Jy sigma=0.402308 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9632 mas, bmaj=2.12 mas, bpa=3.995 degrees ! Estimated noise=0.772047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171591 Jy ! Component: 100 - total flux cleaned = -0.00137281 Jy ! Component: 150 - total flux cleaned = -0.00137375 Jy ! Component: 200 - total flux cleaned = -0.00132037 Jy ! Total flux subtracted in 200 components = -0.00132037 Jy ! Clean residual min=-0.002659 max=0.002522 Jy/beam ! Clean residual mean=-0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.682852 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.682852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059163Jy sigma=0.401217 ! Fit after self-cal, rms=0.059145Jy sigma=0.401109 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.17723e-05 Jy ! Component: 100 - total flux cleaned = 0.000122747 Jy ! Component: 150 - total flux cleaned = 0.000121284 Jy ! Component: 200 - total flux cleaned = 3.20549e-05 Jy ! Total flux subtracted in 200 components = 3.20549e-05 Jy ! Clean residual min=-0.002546 max=0.002455 Jy/beam ! Clean residual mean=-0.000001 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.682884 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 0.682884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059066Jy sigma=0.400598 ! Fit after self-cal, rms=0.059058Jy sigma=0.400560 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059058Jy sigma=0.400560 ! Fit after self-cal, rms=0.059037Jy sigma=0.400342 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.167 mas, bmaj=3.407 mas, bpa=1.058 degrees ! Estimated noise=0.981595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597989 Jy ! Component: 100 - total flux cleaned = 0.000831837 Jy ! Component: 150 - total flux cleaned = 0.000874556 Jy ! Component: 200 - total flux cleaned = 0.000911588 Jy ! Total flux subtracted in 200 components = 0.000911588 Jy ! Clean residual min=-0.002052 max=0.002113 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.683795 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 0.683795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058999Jy sigma=0.400164 ! Fit after self-cal, rms=0.058994Jy sigma=0.400109 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.77179e-05 Jy ! Component: 100 - total flux cleaned = 6.82301e-06 Jy ! Component: 150 - total flux cleaned = -2.35944e-05 Jy ! Component: 200 - total flux cleaned = -7.66079e-05 Jy ! Total flux subtracted in 200 components = -7.66079e-05 Jy ! Clean residual min=-0.001957 max=0.002073 Jy/beam ! Clean residual mean=-0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.683719 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 150 components and 0.683719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058983Jy sigma=0.400064 ! Fit after self-cal, rms=0.058982Jy sigma=0.400047 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9629 mas, bmaj=2.121 mas, bpa=4.01 degrees ! Estimated noise=0.771972 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9629 x 2.121 at 4.01 degrees (North through East) ! Clean map min=-0.0023047 max=0.56623 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058982Jy sigma=0.400047 ! Fit after self-cal, rms=0.054978Jy sigma=0.368053 ! Inverting map and beam ! Estimated beam: bmin=0.963 mas, bmaj=2.121 mas, bpa=4.105 degrees ! Estimated noise=0.772683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000732723 Jy ! Component: 100 - total flux cleaned = -0.000984118 Jy ! Component: 150 - total flux cleaned = -0.00120499 Jy ! Component: 200 - total flux cleaned = -0.00124343 Jy ! Total flux subtracted in 200 components = -0.00124343 Jy ! Clean residual min=-0.002092 max=0.002040 Jy/beam ! Clean residual mean=-0.000000 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.682475 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 163 components and 0.682475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054897Jy sigma=0.367487 ! Fit after self-cal, rms=0.054892Jy sigma=0.367460 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.92707e-06 Jy ! Component: 100 - total flux cleaned = -3.34751e-05 Jy ! Component: 150 - total flux cleaned = -6.81695e-05 Jy ! Component: 200 - total flux cleaned = -6.89163e-05 Jy ! Total flux subtracted in 200 components = -6.89163e-05 Jy ! Clean residual min=-0.001961 max=0.001970 Jy/beam ! Clean residual mean=-0.000000 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.682406 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 174 components and 0.682406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054851Jy sigma=0.367163 ! Fit after self-cal, rms=0.054848Jy sigma=0.367148 ! Inverting map ! Added new window around map position (-9.4, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131719 Jy ! Component: 100 - total flux cleaned = 0.00150243 Jy ! Component: 150 - total flux cleaned = 0.00142188 Jy ! Component: 200 - total flux cleaned = 0.00142147 Jy ! Total flux subtracted in 200 components = 0.00142147 Jy ! Clean residual min=-0.001838 max=0.001679 Jy/beam ! Clean residual mean=-0.000000 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.683828 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 188 components and 0.683828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054767Jy sigma=0.366593 ! Fit after self-cal, rms=0.054765Jy sigma=0.366577 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054765Jy sigma=0.366577 ! Fit after self-cal, rms=0.054753Jy sigma=0.366482 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7728 mas, bmaj=1.774 mas, bpa=4.631 degrees ! Estimated noise=1.23235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433117 Jy ! Component: 100 - total flux cleaned = 0.565093 Jy ! Component: 150 - total flux cleaned = 0.618251 Jy ! Component: 200 - total flux cleaned = 0.6402 Jy ! Total flux subtracted in 200 components = 0.6402 Jy ! Clean residual min=-0.008071 max=0.009528 Jy/beam ! Clean residual mean=-0.000000 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.6402 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.6402 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9628 mas, bmaj=2.122 mas, bpa=4.118 degrees ! Estimated noise=0.772501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121966 Jy ! Component: 100 - total flux cleaned = 0.0186307 Jy ! Component: 150 - total flux cleaned = 0.0229619 Jy ! Component: 200 - total flux cleaned = 0.0268229 Jy ! Total flux subtracted in 200 components = 0.0268229 Jy ! Clean residual min=-0.003588 max=0.004711 Jy/beam ! Clean residual mean=-0.000001 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.667023 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 0.667023 Jy ! Inverting map ! Added new window around map position (0.2, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294978 Jy ! Component: 100 - total flux cleaned = 0.00512107 Jy ! Component: 150 - total flux cleaned = 0.00688753 Jy ! Component: 200 - total flux cleaned = 0.00859905 Jy ! Total flux subtracted in 200 components = 0.00859905 Jy ! Clean residual min=-0.002766 max=0.003104 Jy/beam ! Clean residual mean=-0.000001 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.675622 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.675622 Jy ! Inverting map ! Added new window around map position (0.6, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182131 Jy ! Component: 100 - total flux cleaned = 0.00269961 Jy ! Component: 150 - total flux cleaned = 0.0033894 Jy ! Component: 200 - total flux cleaned = 0.00411107 Jy ! Total flux subtracted in 200 components = 0.00411107 Jy ! Clean residual min=-0.002169 max=0.002241 Jy/beam ! Clean residual mean=-0.000000 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.679733 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 76 components and 0.679733 Jy ! Inverting map ! Added new window around map position (-1.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607232 Jy ! Component: 100 - total flux cleaned = 0.00108812 Jy ! Component: 150 - total flux cleaned = 0.00145916 Jy ! Component: 200 - total flux cleaned = 0.00194047 Jy ! Total flux subtracted in 200 components = 0.00194047 Jy ! Clean residual min=-0.001882 max=0.001894 Jy/beam ! Clean residual mean=-0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.681674 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 94 components and 0.681674 Jy ! Inverting map ! Added new window around map position (-13.6, 40.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139859 Jy ! Component: 100 - total flux cleaned = 0.00176234 Jy ! Component: 150 - total flux cleaned = 0.00204887 Jy ! Component: 200 - total flux cleaned = 0.00221294 Jy ! Total flux subtracted in 200 components = 0.00221294 Jy ! Clean residual min=-0.001743 max=0.001772 Jy/beam ! Clean residual mean=-0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.683887 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 108 components and 0.683887 Jy ! Inverting map ! Added new window around map position (4.6, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022029 Jy ! Component: 100 - total flux cleaned = 0.000746978 Jy ! Component: 150 - total flux cleaned = 0.000942136 Jy ! Component: 200 - total flux cleaned = 0.001034 Jy ! Total flux subtracted in 200 components = 0.001034 Jy ! Clean residual min=-0.001634 max=0.001501 Jy/beam ! Clean residual mean=-0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.684921 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 122 components and 0.684921 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.407 mas, bpa=1.178 degrees ! Estimated noise=0.982293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947855 Jy ! Component: 100 - total flux cleaned = 0.00149231 Jy ! Component: 150 - total flux cleaned = 0.0017419 Jy ! Component: 200 - total flux cleaned = 0.0018563 Jy ! Total flux subtracted in 200 components = 0.0018563 Jy ! Clean residual min=-0.001604 max=0.001624 Jy/beam ! Clean residual mean=-0.000000 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.686777 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.42697e-07 Jy ! Component: 100 - total flux cleaned = 7.4136e-05 Jy ! Component: 150 - total flux cleaned = 0.000121055 Jy ! Component: 200 - total flux cleaned = 0.000207423 Jy ! Total flux subtracted in 200 components = 0.000207423 Jy ! Clean residual min=-0.001573 max=0.001572 Jy/beam ! Clean residual mean=-0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.686985 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 162 components and 0.686985 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9628 mas, bmaj=2.122 mas, bpa=4.118 degrees ! Estimated noise=0.772501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326403 Jy ! Component: 100 - total flux cleaned = -0.000327125 Jy ! Component: 150 - total flux cleaned = -0.000290486 Jy ! Component: 200 - total flux cleaned = -0.00029091 Jy ! Total flux subtracted in 200 components = -0.00029091 Jy ! Clean residual min=-0.001373 max=0.001414 Jy/beam ! Clean residual mean=-0.000000 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.686694 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 176 components and 0.686694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054627Jy sigma=0.365597 ! Fit after self-cal, rms=0.054611Jy sigma=0.365476 wmodel J0925+0019_X_map.mod ! Writing 176 model components to file: J0925+0019_X_map.mod wobs J0925+0019_X_uvs.fits ! Writing UV FITS file: J0925+0019_X_uvs.fits wwins J0925+0019_X_map.win ! wwins: Wrote 10 windows to J0925+0019_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.92948e-05 Jy ! Component: 100 - total flux cleaned = 0.000195305 Jy ! Component: 150 - total flux cleaned = 0.000218059 Jy ! Component: 200 - total flux cleaned = 0.000196406 Jy ! Component: 250 - total flux cleaned = 0.000217321 Jy ! Component: 300 - total flux cleaned = 0.000298565 Jy ! Component: 350 - total flux cleaned = 0.000397334 Jy ! Component: 400 - total flux cleaned = 0.000493896 Jy ! Component: 450 - total flux cleaned = 0.000607035 Jy ! Component: 500 - total flux cleaned = 0.000681044 Jy ! Component: 550 - total flux cleaned = 0.000808009 Jy ! Component: 600 - total flux cleaned = 0.000878914 Jy ! Component: 650 - total flux cleaned = 0.000949003 Jy ! Component: 700 - total flux cleaned = 0.00105198 Jy ! Component: 750 - total flux cleaned = 0.00113621 Jy ! Component: 800 - total flux cleaned = 0.00121946 Jy ! Component: 850 - total flux cleaned = 0.00130184 Jy ! Component: 900 - total flux cleaned = 0.00139911 Jy ! Component: 950 - total flux cleaned = 0.0014951 Jy ! Component: 1000 - total flux cleaned = 0.00154262 Jy ! Component: 1050 - total flux cleaned = 0.00165178 Jy ! Component: 1100 - total flux cleaned = 0.00174415 Jy ! Component: 1150 - total flux cleaned = 0.00183534 Jy ! Component: 1200 - total flux cleaned = 0.00195566 Jy ! Component: 1250 - total flux cleaned = 0.0020449 Jy ! Component: 1300 - total flux cleaned = 0.00216254 Jy ! Component: 1350 - total flux cleaned = 0.00224957 Jy ! Component: 1400 - total flux cleaned = 0.00234992 Jy ! Component: 1450 - total flux cleaned = 0.00244929 Jy ! Component: 1500 - total flux cleaned = 0.00253362 Jy ! Component: 1550 - total flux cleaned = 0.00261699 Jy ! Component: 1600 - total flux cleaned = 0.00269967 Jy ! Component: 1650 - total flux cleaned = 0.00279508 Jy ! Component: 1700 - total flux cleaned = 0.00286267 Jy ! Component: 1750 - total flux cleaned = 0.00296953 Jy ! Component: 1800 - total flux cleaned = 0.00299614 Jy ! Component: 1850 - total flux cleaned = 0.00310122 Jy ! Component: 1900 - total flux cleaned = 0.00320508 Jy ! Component: 1950 - total flux cleaned = 0.00326944 Jy ! Component: 2000 - total flux cleaned = 0.00332036 Jy ! Component: 2050 - total flux cleaned = 0.00339608 Jy ! Component: 2100 - total flux cleaned = 0.0034338 Jy ! Component: 2150 - total flux cleaned = 0.00350823 Jy ! Component: 2200 - total flux cleaned = 0.00356952 Jy ! Component: 2250 - total flux cleaned = 0.00360602 Jy ! Component: 2300 - total flux cleaned = 0.00366643 Jy ! Component: 2350 - total flux cleaned = 0.00372627 Jy ! Component: 2400 - total flux cleaned = 0.00382137 Jy ! Component: 2450 - total flux cleaned = 0.00385668 Jy ! Component: 2500 - total flux cleaned = 0.00393848 Jy ! Component: 2550 - total flux cleaned = 0.00393842 Jy ! Component: 2600 - total flux cleaned = 0.0040305 Jy ! Component: 2650 - total flux cleaned = 0.004019 Jy ! Component: 2700 - total flux cleaned = 0.00410996 Jy ! Component: 2750 - total flux cleaned = 0.00418875 Jy ! Component: 2800 - total flux cleaned = 0.00421099 Jy ! Component: 2850 - total flux cleaned = 0.00422203 Jy ! Component: 2900 - total flux cleaned = 0.00432122 Jy ! Component: 2950 - total flux cleaned = 0.00437593 Jy ! Component: 3000 - total flux cleaned = 0.0044084 Jy ! Component: 3050 - total flux cleaned = 0.00445162 Jy ! Component: 3100 - total flux cleaned = 0.00448383 Jy ! Component: 3150 - total flux cleaned = 0.00455834 Jy ! Component: 3200 - total flux cleaned = 0.0045795 Jy ! Component: 3250 - total flux cleaned = 0.00465309 Jy ! Component: 3300 - total flux cleaned = 0.00466345 Jy ! Component: 3350 - total flux cleaned = 0.00470499 Jy ! Component: 3400 - total flux cleaned = 0.00474603 Jy ! Component: 3450 - total flux cleaned = 0.00479718 Jy ! Component: 3500 - total flux cleaned = 0.00481752 Jy ! Component: 3550 - total flux cleaned = 0.00483773 Jy ! Component: 3600 - total flux cleaned = 0.00484772 Jy ! Component: 3650 - total flux cleaned = 0.00483764 Jy ! Component: 3700 - total flux cleaned = 0.00491697 Jy ! Component: 3750 - total flux cleaned = 0.00494656 Jy ! Component: 3800 - total flux cleaned = 0.00496618 Jy ! Component: 3850 - total flux cleaned = 0.00498573 Jy ! Component: 3900 - total flux cleaned = 0.00502439 Jy ! Component: 3950 - total flux cleaned = 0.00503415 Jy ! Component: 4000 - total flux cleaned = 0.00504375 Jy ! Component: 4050 - total flux cleaned = 0.00506279 Jy ! Total flux subtracted in 4096 components = 0.00508167 Jy ! Clean residual min=-0.000538 max=0.000705 Jy/beam ! Clean residual mean=-0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.691775 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 477 components and 0.691775 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0925+0019_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9628 x 2.122 at 4.118 degrees (North through East) ! Clean map min=-0.0022108 max=0.56346 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0925+0019_X_map.fits wmodel /image_prod/ug002_uva//J0925+0019_X_map.mod ! Writing 477 model components to file: /image_prod/ug002_uva//J0925+0019_X_map.mod wobs /image_prod/ug002_uva//J0925+0019_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0925+0019_X_uvs.fits wwins /image_prod/ug002_uva//J0925+0019_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0925+0019_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.563464 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162609 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0865766 0.0865766 0.173153 0.346306 0.692612 1.38522 2.77045 5.5409 11.0818 22.1636 44.3272 88.6544 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.563 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3465.14 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0925+0019_X_dfm.log closed on Wed Mar 4 22:59:01 2020