! Started logfile: /image_prod/ug002_uva//J0919-1847_S_dfm.log on Wed Mar 4 22:56:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0919-1847_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0919-1847_S_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994667 visibilities/baseline/integration-bin. ! Found source: J0919-1847 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6714 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0919-1847_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.006837Jy sigma=7.315735 ! Fit after self-cal, rms=0.947330Jy sigma=6.859556 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=7.198 mas, bpa=-4.407 degrees ! Estimated noise=1.84068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435741 Jy ! Component: 100 - total flux cleaned = 0.0532183 Jy ! Total flux subtracted in 100 components = 0.0532183 Jy ! Clean residual min=-0.004243 max=0.007450 Jy/beam ! Clean residual mean=-0.000037 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.0532183 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0532183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082295Jy sigma=0.508289 ! Fit after self-cal, rms=0.081099Jy sigma=0.499089 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.375 mas, bpa=-3.962 degrees ! Estimated noise=1.24392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00553776 Jy ! Component: 100 - total flux cleaned = 0.00822937 Jy ! Component: 150 - total flux cleaned = 0.00972475 Jy ! Component: 200 - total flux cleaned = 0.0102238 Jy ! Total flux subtracted in 200 components = 0.0102238 Jy ! Clean residual min=-0.004762 max=0.009677 Jy/beam ! Clean residual mean=-0.000046 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.0634421 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.0634421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080813Jy sigma=0.495330 ! Fit after self-cal, rms=0.080868Jy sigma=0.495139 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.225 x 8.375 at -3.962 degrees (North through East) ! Clean map min=-0.0046976 max=0.05666 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.41 HN 1.31 KP 0.81 ! LA 0.82 MK 1.01 NL 1.08 OV 1.08 ! PT 0.82 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.31 HN 1.17 KP 0.80 ! LA 0.86 MK 1.05 NL 1.25 OV 1.19 ! PT 0.79 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.30 HN 1.21 KP 0.77 ! LA 0.87 MK 1.02 NL 1.08 OV 1.14 ! PT 0.89 SC 1.08 ! ! ! Fit before self-cal, rms=0.080868Jy sigma=0.495139 ! Fit after self-cal, rms=0.089720Jy sigma=0.484939 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=8.462 mas, bpa=-3.509 degrees ! Estimated noise=1.25716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00772763 Jy ! Component: 100 - total flux cleaned = 0.0118154 Jy ! Component: 150 - total flux cleaned = 0.0132642 Jy ! Component: 200 - total flux cleaned = 0.0136779 Jy ! Total flux subtracted in 200 components = 0.0136779 Jy ! Clean residual min=-0.004438 max=0.003726 Jy/beam ! Clean residual mean=-0.000005 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.07712 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.07712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089095Jy sigma=0.477674 ! Fit after self-cal, rms=0.089344Jy sigma=0.476023 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089344Jy sigma=0.476023 ! Fit after self-cal, rms=0.087588Jy sigma=0.473313 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=8.38 mas, bpa=-3.621 degrees ! Estimated noise=1.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307192 Jy ! Component: 100 - total flux cleaned = 0.00422972 Jy ! Component: 150 - total flux cleaned = 0.00460776 Jy ! Component: 200 - total flux cleaned = 0.00460514 Jy ! Total flux subtracted in 200 components = 0.00460514 Jy ! Clean residual min=-0.002629 max=0.002712 Jy/beam ! Clean residual mean=-0.000001 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0817252 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 0.0817251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087429Jy sigma=0.471988 ! Fit after self-cal, rms=0.087318Jy sigma=0.471674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757391 Jy ! Component: 100 - total flux cleaned = 0.000707099 Jy ! Component: 150 - total flux cleaned = 0.000707079 Jy ! Component: 200 - total flux cleaned = 0.000661352 Jy ! Total flux subtracted in 200 components = 0.000661352 Jy ! Clean residual min=-0.002550 max=0.002631 Jy/beam ! Clean residual mean=0.000000 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0823865 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.0823865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087249Jy sigma=0.471224 ! Fit after self-cal, rms=0.087220Jy sigma=0.471188 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087220Jy sigma=0.471188 ! Fit after self-cal, rms=0.086032Jy sigma=0.470667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.382 mas, bpa=-3.559 degrees ! Estimated noise=1.21252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180486 Jy ! Component: 100 - total flux cleaned = 0.00211961 Jy ! Component: 150 - total flux cleaned = 0.00216519 Jy ! Component: 200 - total flux cleaned = 0.00212647 Jy ! Total flux subtracted in 200 components = 0.00212647 Jy ! Clean residual min=-0.002187 max=0.002573 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.084513 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 104 components and 0.084513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085958Jy sigma=0.470094 ! Fit after self-cal, rms=0.085918Jy sigma=0.470011 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29.5, -44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195219 Jy ! Component: 100 - total flux cleaned = 0.00227385 Jy ! Component: 150 - total flux cleaned = 0.00223098 Jy ! Component: 200 - total flux cleaned = 0.00219107 Jy ! Total flux subtracted in 200 components = 0.00219107 Jy ! Clean residual min=-0.002132 max=0.002227 Jy/beam ! Clean residual mean=0.000001 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.086704 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.086704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085825Jy sigma=0.469379 ! Fit after self-cal, rms=0.085776Jy sigma=0.469291 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085776Jy sigma=0.469291 ! Fit after self-cal, rms=0.084007Jy sigma=0.469057 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.98 mas, bmaj=17.64 mas, bpa=-1.366 degrees ! Estimated noise=1.42031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120296 Jy ! Component: 100 - total flux cleaned = 0.0016266 Jy ! Component: 150 - total flux cleaned = 0.00174799 Jy ! Component: 200 - total flux cleaned = 0.00174679 Jy ! Total flux subtracted in 200 components = 0.00174679 Jy ! Clean residual min=-0.001939 max=0.001886 Jy/beam ! Clean residual mean=0.000000 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0884508 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 142 components and 0.0884508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083989Jy sigma=0.468806 ! Fit after self-cal, rms=0.083942Jy sigma=0.468701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195969 Jy ! Component: 100 - total flux cleaned = 0.000223936 Jy ! Component: 150 - total flux cleaned = 0.000199321 Jy ! Component: 200 - total flux cleaned = 0.000154367 Jy ! Total flux subtracted in 200 components = 0.000154367 Jy ! Clean residual min=-0.001889 max=0.001706 Jy/beam ! Clean residual mean=0.000000 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0886052 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 155 components and 0.0886052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083943Jy sigma=0.468680 ! Fit after self-cal, rms=0.083940Jy sigma=0.468654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=8.384 mas, bpa=-3.486 degrees ! Estimated noise=1.20307 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.248 x 8.384 at -3.486 degrees (North through East) ! Clean map min=-0.0023838 max=0.055656 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=7.181 mas, bpa=-3.819 degrees ! Estimated noise=1.78991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431101 Jy ! Component: 100 - total flux cleaned = 0.0544949 Jy ! Component: 150 - total flux cleaned = 0.0619731 Jy ! Component: 200 - total flux cleaned = 0.0677356 Jy ! Total flux subtracted in 200 components = 0.0677356 Jy ! Clean residual min=-0.003397 max=0.004028 Jy/beam ! Clean residual mean=-0.000020 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.0677356 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0677356 Jy ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=8.384 mas, bpa=-3.486 degrees ! Estimated noise=1.20307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637883 Jy ! Component: 100 - total flux cleaned = 0.0106605 Jy ! Component: 150 - total flux cleaned = 0.0138136 Jy ! Component: 200 - total flux cleaned = 0.0162067 Jy ! Total flux subtracted in 200 components = 0.0162067 Jy ! Clean residual min=-0.002144 max=0.002308 Jy/beam ! Clean residual mean=-0.000005 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0839423 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 77 components and 0.0839423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.98 mas, bmaj=17.64 mas, bpa=-1.366 degrees ! Estimated noise=1.42031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258635 Jy ! Component: 100 - total flux cleaned = 0.00345128 Jy ! Component: 150 - total flux cleaned = 0.00389176 Jy ! Component: 200 - total flux cleaned = 0.00401422 Jy ! Total flux subtracted in 200 components = 0.00401422 Jy ! Clean residual min=-0.002318 max=0.001876 Jy/beam ! Clean residual mean=-0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0879565 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111484 Jy ! Component: 100 - total flux cleaned = 0.000146043 Jy ! Component: 150 - total flux cleaned = 0.00017753 Jy ! Component: 200 - total flux cleaned = 0.000205982 Jy ! Total flux subtracted in 200 components = 0.000205982 Jy ! Clean residual min=-0.002170 max=0.001806 Jy/beam ! Clean residual mean=-0.000000 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0881625 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 132 components and 0.0881625 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=8.384 mas, bpa=-3.486 degrees ! Estimated noise=1.20307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.99965e-05 Jy ! Component: 100 - total flux cleaned = 0.000212992 Jy ! Component: 150 - total flux cleaned = 0.000292726 Jy ! Component: 200 - total flux cleaned = 0.000328693 Jy ! Total flux subtracted in 200 components = 0.000328693 Jy ! Clean residual min=-0.001976 max=0.002118 Jy/beam ! Clean residual mean=-0.000000 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0884912 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 149 components and 0.0884912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083945Jy sigma=0.468760 ! Fit after self-cal, rms=0.083927Jy sigma=0.468597 wmodel J0919-1847_S_map.mod ! Writing 149 model components to file: J0919-1847_S_map.mod wobs J0919-1847_S_uvs.fits ! Writing UV FITS file: J0919-1847_S_uvs.fits wwins J0919-1847_S_map.win ! wwins: Wrote 3 windows to J0919-1847_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420061 Jy ! Component: 100 - total flux cleaned = 0.000116903 Jy ! Component: 150 - total flux cleaned = -7.60168e-05 Jy ! Component: 200 - total flux cleaned = -0.000199967 Jy ! Component: 250 - total flux cleaned = -0.000289649 Jy ! Component: 300 - total flux cleaned = -0.000289952 Jy ! Component: 350 - total flux cleaned = -0.00037527 Jy ! Component: 400 - total flux cleaned = -0.000375273 Jy ! Component: 450 - total flux cleaned = -0.000509896 Jy ! Component: 500 - total flux cleaned = -0.000535812 Jy ! Component: 550 - total flux cleaned = -0.000639143 Jy ! Component: 600 - total flux cleaned = -0.000664386 Jy ! Component: 650 - total flux cleaned = -0.000763676 Jy ! Component: 700 - total flux cleaned = -0.000933874 Jy ! Component: 750 - total flux cleaned = -0.00102971 Jy ! Component: 800 - total flux cleaned = -0.00119446 Jy ! Component: 850 - total flux cleaned = -0.00135677 Jy ! Component: 900 - total flux cleaned = -0.00147082 Jy ! Component: 950 - total flux cleaned = -0.00165084 Jy ! Component: 1000 - total flux cleaned = -0.00171757 Jy ! Component: 1050 - total flux cleaned = -0.00200236 Jy ! Component: 1100 - total flux cleaned = -0.00206691 Jy ! Component: 1150 - total flux cleaned = -0.00217377 Jy ! Component: 1200 - total flux cleaned = -0.00234267 Jy ! Component: 1250 - total flux cleaned = -0.00253048 Jy ! Component: 1300 - total flux cleaned = -0.00271512 Jy ! Component: 1350 - total flux cleaned = -0.00283668 Jy ! Component: 1400 - total flux cleaned = -0.00289694 Jy ! Component: 1450 - total flux cleaned = -0.00301567 Jy ! Component: 1500 - total flux cleaned = -0.0030544 Jy ! Component: 1550 - total flux cleaned = -0.00311228 Jy ! Component: 1600 - total flux cleaned = -0.00320797 Jy ! Component: 1650 - total flux cleaned = -0.00330236 Jy ! Component: 1700 - total flux cleaned = -0.00341413 Jy ! Component: 1750 - total flux cleaned = -0.00345117 Jy ! Component: 1800 - total flux cleaned = -0.00356069 Jy ! Component: 1850 - total flux cleaned = -0.00363325 Jy ! Component: 1900 - total flux cleaned = -0.00366915 Jy ! Component: 1950 - total flux cleaned = -0.00375792 Jy ! Component: 2000 - total flux cleaned = -0.00391539 Jy ! Component: 2050 - total flux cleaned = -0.00395006 Jy ! Component: 2100 - total flux cleaned = -0.00400156 Jy ! Component: 2150 - total flux cleaned = -0.00403553 Jy ! Component: 2200 - total flux cleaned = -0.00408615 Jy ! Component: 2250 - total flux cleaned = -0.00411943 Jy ! Component: 2300 - total flux cleaned = -0.00418527 Jy ! Component: 2350 - total flux cleaned = -0.00420168 Jy ! Component: 2400 - total flux cleaned = -0.00420185 Jy ! Component: 2450 - total flux cleaned = -0.00418598 Jy ! Component: 2500 - total flux cleaned = -0.00421797 Jy ! Component: 2550 - total flux cleaned = -0.0042814 Jy ! Component: 2600 - total flux cleaned = -0.00428119 Jy ! Component: 2650 - total flux cleaned = -0.00435887 Jy ! Component: 2700 - total flux cleaned = -0.00437388 Jy ! Component: 2750 - total flux cleaned = -0.00434344 Jy ! Component: 2800 - total flux cleaned = -0.00440403 Jy ! Component: 2850 - total flux cleaned = -0.00440396 Jy ! Component: 2900 - total flux cleaned = -0.00440388 Jy ! Component: 2950 - total flux cleaned = -0.00440381 Jy ! Component: 3000 - total flux cleaned = -0.00435978 Jy ! Component: 3050 - total flux cleaned = -0.00440338 Jy ! Component: 3100 - total flux cleaned = -0.00440334 Jy ! Component: 3150 - total flux cleaned = -0.00438899 Jy ! Component: 3200 - total flux cleaned = -0.00437468 Jy ! Component: 3250 - total flux cleaned = -0.00434657 Jy ! Component: 3300 - total flux cleaned = -0.00429033 Jy ! Component: 3350 - total flux cleaned = -0.00431822 Jy ! Component: 3400 - total flux cleaned = -0.00431811 Jy ! Component: 3450 - total flux cleaned = -0.00431811 Jy ! Component: 3500 - total flux cleaned = -0.00431799 Jy ! Component: 3550 - total flux cleaned = -0.00431795 Jy ! Component: 3600 - total flux cleaned = -0.00431802 Jy ! Component: 3650 - total flux cleaned = -0.0043314 Jy ! Component: 3700 - total flux cleaned = -0.00433125 Jy ! Component: 3750 - total flux cleaned = -0.00434443 Jy ! Component: 3800 - total flux cleaned = -0.00439681 Jy ! Component: 3850 - total flux cleaned = -0.00444873 Jy ! Component: 3900 - total flux cleaned = -0.00438404 Jy ! Component: 3950 - total flux cleaned = -0.00442259 Jy ! Component: 4000 - total flux cleaned = -0.00442262 Jy ! Component: 4050 - total flux cleaned = -0.00444804 Jy ! Total flux subtracted in 4096 components = -0.00448571 Jy ! Clean residual min=-0.000675 max=0.000638 Jy/beam ! Clean residual mean=-0.000002 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.0840054 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 411 components and 0.0840054 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0919-1847_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.248 x 8.384 at -3.486 degrees (North through East) ! Clean map min=-0.0016841 max=0.05495 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0919-1847_S_map.fits wmodel /image_prod/ug002_uva//J0919-1847_S_map.mod ! Writing 411 model components to file: /image_prod/ug002_uva//J0919-1847_S_map.mod wobs /image_prod/ug002_uva//J0919-1847_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0919-1847_S_uvs.fits wwins /image_prod/ug002_uva//J0919-1847_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0919-1847_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0549496 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2414 1.2414 2.4828 4.96559 9.93119 19.8624 39.7248 79.4495 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.054 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 241.662 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0919-1847_S_dfm.log closed on Wed Mar 4 22:56:42 2020