! Started logfile: /image_prod/ug002_uva//J0917-1345_S_dfm.log on Wed Mar 4 22:55:19 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0917-1345_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0917-1345_S_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.978472 visibilities/baseline/integration-bin. ! Found source: J0917-1345 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4227 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0917-1345_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006312Jy sigma=7.935464 ! Fit after self-cal, rms=0.886741Jy sigma=7.015552 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=7.27 mas, bpa=-6.266 degrees ! Estimated noise=2.06985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.089052 Jy ! Component: 100 - total flux cleaned = 0.109485 Jy ! Total flux subtracted in 100 components = 0.109485 Jy ! Clean residual min=-0.005284 max=0.007305 Jy/beam ! Clean residual mean=-0.000023 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.109485 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.109485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068581Jy sigma=0.496247 ! Fit after self-cal, rms=0.068571Jy sigma=0.496155 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=8.382 mas, bpa=-6.186 degrees ! Estimated noise=1.40799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00883748 Jy ! Component: 100 - total flux cleaned = 0.0128521 Jy ! Component: 150 - total flux cleaned = 0.0148202 Jy ! Component: 200 - total flux cleaned = 0.0152074 Jy ! Total flux subtracted in 200 components = 0.0152074 Jy ! Clean residual min=-0.003480 max=0.003673 Jy/beam ! Clean residual mean=-0.000002 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.124692 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 48 components and 0.124692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067616Jy sigma=0.486921 ! Fit after self-cal, rms=0.067625Jy sigma=0.486844 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 8.382 at -6.186 degrees (North through East) ! Clean map min=-0.0034725 max=0.11472 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.03 KP 1.03 LA 0.99 ! MK 1.13 NL 0.95 OV 0.99 PT 1.05 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.00 KP 0.95 LA 1.01 ! MK 1.05 NL 1.02 OV 0.99 PT 1.08 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.02 KP 0.95 LA 1.00 ! MK 0.92 NL 0.87 OV 1.02 PT 1.01 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.067625Jy sigma=0.486844 ! Fit after self-cal, rms=0.066480Jy sigma=0.482354 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=8.393 mas, bpa=-5.932 degrees ! Estimated noise=1.40549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268514 Jy ! Component: 100 - total flux cleaned = -0.000329124 Jy ! Component: 150 - total flux cleaned = -0.000378039 Jy ! Component: 200 - total flux cleaned = -0.000420832 Jy ! Total flux subtracted in 200 components = -0.000420832 Jy ! Clean residual min=-0.003107 max=0.002981 Jy/beam ! Clean residual mean=0.000002 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.124271 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.124271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066456Jy sigma=0.482268 ! Fit after self-cal, rms=0.066461Jy sigma=0.482185 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066461Jy sigma=0.482185 ! Fit after self-cal, rms=0.065471Jy sigma=0.478953 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.402 mas, bpa=-5.924 degrees ! Estimated noise=1.40285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243652 Jy ! Component: 100 - total flux cleaned = -0.000242079 Jy ! Component: 150 - total flux cleaned = -0.00026666 Jy ! Component: 200 - total flux cleaned = -0.000289234 Jy ! Total flux subtracted in 200 components = -0.000289234 Jy ! Clean residual min=-0.003031 max=0.002725 Jy/beam ! Clean residual mean=0.000002 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.123982 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.123982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065462Jy sigma=0.478896 ! Fit after self-cal, rms=0.065462Jy sigma=0.478847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.1377e-05 Jy ! Component: 100 - total flux cleaned = -7.37542e-05 Jy ! Component: 150 - total flux cleaned = -7.35383e-05 Jy ! Component: 200 - total flux cleaned = -7.336e-05 Jy ! Total flux subtracted in 200 components = -7.336e-05 Jy ! Clean residual min=-0.003006 max=0.002728 Jy/beam ! Clean residual mean=0.000002 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.123909 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.123909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065457Jy sigma=0.478814 ! Fit after self-cal, rms=0.065455Jy sigma=0.478807 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065455Jy sigma=0.478807 ! Fit after self-cal, rms=0.065377Jy sigma=0.478792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.398 mas, bpa=-5.869 degrees ! Estimated noise=1.40105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145922 Jy ! Component: 100 - total flux cleaned = -0.000157682 Jy ! Component: 150 - total flux cleaned = -0.000177571 Jy ! Component: 200 - total flux cleaned = -0.000185971 Jy ! Total flux subtracted in 200 components = -0.000185971 Jy ! Clean residual min=-0.002972 max=0.002738 Jy/beam ! Clean residual mean=0.000002 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.123723 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.123723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065372Jy sigma=0.478763 ! Fit after self-cal, rms=0.065371Jy sigma=0.478758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.56803e-05 Jy ! Component: 100 - total flux cleaned = -4.58018e-05 Jy ! Component: 150 - total flux cleaned = -4.59232e-05 Jy ! Component: 200 - total flux cleaned = -4.63276e-05 Jy ! Total flux subtracted in 200 components = -4.63276e-05 Jy ! Clean residual min=-0.002951 max=0.002745 Jy/beam ! Clean residual mean=0.000002 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.123677 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.123677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065368Jy sigma=0.478739 ! Fit after self-cal, rms=0.065367Jy sigma=0.478736 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065367Jy sigma=0.478736 ! Fit after self-cal, rms=0.065298Jy sigma=0.478731 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.357 mas, bmaj=17 mas, bpa=-6.663 degrees ! Estimated noise=1.75555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019929 Jy ! Component: 100 - total flux cleaned = -0.000222258 Jy ! Component: 150 - total flux cleaned = -0.000241333 Jy ! Component: 200 - total flux cleaned = -0.000250026 Jy ! Total flux subtracted in 200 components = -0.000250026 Jy ! Clean residual min=-0.003294 max=0.002559 Jy/beam ! Clean residual mean=0.000006 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.123427 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 75 components and 0.123427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065296Jy sigma=0.478735 ! Fit after self-cal, rms=0.065295Jy sigma=0.478731 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.01749e-05 Jy ! Component: 100 - total flux cleaned = -1.93243e-05 Jy ! Component: 150 - total flux cleaned = -3.48636e-05 Jy ! Component: 200 - total flux cleaned = -4.1316e-05 Jy ! Total flux subtracted in 200 components = -4.1316e-05 Jy ! Clean residual min=-0.003288 max=0.002562 Jy/beam ! Clean residual mean=0.000006 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.123385 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.123385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065295Jy sigma=0.478738 ! Fit after self-cal, rms=0.065294Jy sigma=0.478734 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.394 mas, bpa=-5.824 degrees ! Estimated noise=1.39954 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.071 x 8.394 at -5.824 degrees (North through East) ! Clean map min=-0.0027937 max=0.1144 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=7.309 mas, bpa=-5.877 degrees ! Estimated noise=2.06262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0886414 Jy ! Component: 100 - total flux cleaned = 0.109266 Jy ! Component: 150 - total flux cleaned = 0.116631 Jy ! Component: 200 - total flux cleaned = 0.120278 Jy ! Total flux subtracted in 200 components = 0.120278 Jy ! Clean residual min=-0.004108 max=0.004805 Jy/beam ! Clean residual mean=-0.000002 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.120278 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.120278 Jy ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.394 mas, bpa=-5.824 degrees ! Estimated noise=1.39954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203139 Jy ! Component: 100 - total flux cleaned = 0.00247036 Jy ! Component: 150 - total flux cleaned = 0.00276809 Jy ! Component: 200 - total flux cleaned = 0.00298412 Jy ! Total flux subtracted in 200 components = 0.00298412 Jy ! Clean residual min=-0.003067 max=0.002671 Jy/beam ! Clean residual mean=0.000002 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.123262 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.123262 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.357 mas, bmaj=17 mas, bpa=-6.663 degrees ! Estimated noise=1.75555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353356 Jy ! Component: 100 - total flux cleaned = 0.000353713 Jy ! Component: 150 - total flux cleaned = 0.000330778 Jy ! Component: 200 - total flux cleaned = 0.000302356 Jy ! Total flux subtracted in 200 components = 0.000302356 Jy ! Clean residual min=-0.003321 max=0.002550 Jy/beam ! Clean residual mean=0.000006 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.123564 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.57616e-05 Jy ! Component: 100 - total flux cleaned = -2.96738e-05 Jy ! Component: 150 - total flux cleaned = -4.17253e-05 Jy ! Component: 200 - total flux cleaned = -4.70892e-05 Jy ! Total flux subtracted in 200 components = -4.70892e-05 Jy ! Clean residual min=-0.003310 max=0.002554 Jy/beam ! Clean residual mean=0.000006 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.123517 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.123517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.394 mas, bpa=-5.824 degrees ! Estimated noise=1.39954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.06485e-05 Jy ! Component: 100 - total flux cleaned = 0.000117229 Jy ! Component: 150 - total flux cleaned = 0.000149611 Jy ! Component: 200 - total flux cleaned = 0.000135873 Jy ! Total flux subtracted in 200 components = 0.000135873 Jy ! Clean residual min=-0.002981 max=0.002699 Jy/beam ! Clean residual mean=0.000002 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.123653 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.123653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065294Jy sigma=0.478753 ! Fit after self-cal, rms=0.065291Jy sigma=0.478731 wmodel J0917-1345_S_map.mod ! Writing 56 model components to file: J0917-1345_S_map.mod wobs J0917-1345_S_uvs.fits ! Writing UV FITS file: J0917-1345_S_uvs.fits wwins J0917-1345_S_map.win ! wwins: Wrote 1 windows to J0917-1345_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237168 Jy ! Component: 100 - total flux cleaned = 6.95466e-05 Jy ! Component: 150 - total flux cleaned = 0.0005276 Jy ! Component: 200 - total flux cleaned = 0.000962335 Jy ! Component: 250 - total flux cleaned = 0.00130261 Jy ! Component: 300 - total flux cleaned = 0.00159377 Jy ! Component: 350 - total flux cleaned = 0.00176948 Jy ! Component: 400 - total flux cleaned = 0.00190451 Jy ! Component: 450 - total flux cleaned = 0.00193747 Jy ! Component: 500 - total flux cleaned = 0.0019694 Jy ! Component: 550 - total flux cleaned = 0.00187472 Jy ! Component: 600 - total flux cleaned = 0.00184504 Jy ! Component: 650 - total flux cleaned = 0.00196572 Jy ! Component: 700 - total flux cleaned = 0.00190583 Jy ! Component: 750 - total flux cleaned = 0.00190589 Jy ! Component: 800 - total flux cleaned = 0.00196333 Jy ! Component: 850 - total flux cleaned = 0.0020189 Jy ! Component: 900 - total flux cleaned = 0.00199163 Jy ! Component: 950 - total flux cleaned = 0.00201892 Jy ! Component: 1000 - total flux cleaned = 0.00204551 Jy ! Component: 1050 - total flux cleaned = 0.00209771 Jy ! Component: 1100 - total flux cleaned = 0.00212299 Jy ! Component: 1150 - total flux cleaned = 0.00207323 Jy ! Component: 1200 - total flux cleaned = 0.00212317 Jy ! Component: 1250 - total flux cleaned = 0.00217198 Jy ! Component: 1300 - total flux cleaned = 0.00214811 Jy ! Component: 1350 - total flux cleaned = 0.00217169 Jy ! Component: 1400 - total flux cleaned = 0.00214867 Jy ! Component: 1450 - total flux cleaned = 0.00214838 Jy ! Component: 1500 - total flux cleaned = 0.00214829 Jy ! Component: 1550 - total flux cleaned = 0.00203658 Jy ! Component: 1600 - total flux cleaned = 0.00203648 Jy ! Component: 1650 - total flux cleaned = 0.00199294 Jy ! Component: 1700 - total flux cleaned = 0.00197181 Jy ! Component: 1750 - total flux cleaned = 0.00192958 Jy ! Component: 1800 - total flux cleaned = 0.00186737 Jy ! Component: 1850 - total flux cleaned = 0.00188787 Jy ! Component: 1900 - total flux cleaned = 0.00180716 Jy ! Component: 1950 - total flux cleaned = 0.00178742 Jy ! Component: 2000 - total flux cleaned = 0.00174796 Jy ! Component: 2050 - total flux cleaned = 0.00174792 Jy ! Component: 2100 - total flux cleaned = 0.00167093 Jy ! Component: 2150 - total flux cleaned = 0.00167091 Jy ! Component: 2200 - total flux cleaned = 0.00167106 Jy ! Component: 2250 - total flux cleaned = 0.00168969 Jy ! Component: 2300 - total flux cleaned = 0.00172634 Jy ! Component: 2350 - total flux cleaned = 0.00169021 Jy ! Component: 2400 - total flux cleaned = 0.00174425 Jy ! Component: 2450 - total flux cleaned = 0.00176209 Jy ! Component: 2500 - total flux cleaned = 0.00176201 Jy ! Component: 2550 - total flux cleaned = 0.00169259 Jy ! Component: 2600 - total flux cleaned = 0.00172669 Jy ! Component: 2650 - total flux cleaned = 0.00169278 Jy ! Component: 2700 - total flux cleaned = 0.00172663 Jy ! Component: 2750 - total flux cleaned = 0.00172673 Jy ! Component: 2800 - total flux cleaned = 0.00167735 Jy ! Component: 2850 - total flux cleaned = 0.00169405 Jy ! Component: 2900 - total flux cleaned = 0.00164541 Jy ! Component: 2950 - total flux cleaned = 0.0016778 Jy ! Component: 3000 - total flux cleaned = 0.00166175 Jy ! Component: 3050 - total flux cleaned = 0.00164588 Jy ! Component: 3100 - total flux cleaned = 0.0015987 Jy ! Component: 3150 - total flux cleaned = 0.00161446 Jy ! Component: 3200 - total flux cleaned = 0.00161441 Jy ! Component: 3250 - total flux cleaned = 0.0015683 Jy ! Component: 3300 - total flux cleaned = 0.00158371 Jy ! Component: 3350 - total flux cleaned = 0.00161398 Jy ! Component: 3400 - total flux cleaned = 0.00161388 Jy ! Component: 3450 - total flux cleaned = 0.00159878 Jy ! Component: 3500 - total flux cleaned = 0.00161346 Jy ! Component: 3550 - total flux cleaned = 0.00155432 Jy ! Component: 3600 - total flux cleaned = 0.00155439 Jy ! Component: 3650 - total flux cleaned = 0.00158359 Jy ! Component: 3700 - total flux cleaned = 0.00156905 Jy ! Component: 3750 - total flux cleaned = 0.00156914 Jy ! Component: 3800 - total flux cleaned = 0.00155495 Jy ! Component: 3850 - total flux cleaned = 0.00155493 Jy ! Component: 3900 - total flux cleaned = 0.00151262 Jy ! Component: 3950 - total flux cleaned = 0.00147061 Jy ! Component: 4000 - total flux cleaned = 0.00144277 Jy ! Component: 4050 - total flux cleaned = 0.00148425 Jy ! Total flux subtracted in 4096 components = 0.00144289 Jy ! Clean residual min=-0.000828 max=0.000867 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.125096 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 299 components and 0.125096 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0917-1345_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.071 x 8.394 at -5.824 degrees (North through East) ! Clean map min=-0.0021178 max=0.11383 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0917-1345_S_map.fits wmodel /image_prod/ug002_uva//J0917-1345_S_map.mod ! Writing 299 model components to file: /image_prod/ug002_uva//J0917-1345_S_map.mod wobs /image_prod/ug002_uva//J0917-1345_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0917-1345_S_uvs.fits wwins /image_prod/ug002_uva//J0917-1345_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0917-1345_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.113828 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000234278 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.617451 0.617451 1.2349 2.4698 4.93961 9.87922 19.7584 39.5169 79.0337 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.113 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 485.868 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0917-1345_S_dfm.log closed on Wed Mar 4 22:55:23 2020