! Started logfile: /image_prod/ug002_uva//J0911+8607_S_a_dfm.log on Wed Mar 4 22:52:10 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0911+8607_S_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0911+8607_S_a_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.787037 visibilities/baseline/integration-bin. ! Found source: J0911+8607 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 3825 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0911+8607_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001257Jy sigma=7.238536 ! Fit after self-cal, rms=0.952982Jy sigma=6.894174 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=7.455 mas, bpa=46.29 degrees ! Estimated noise=2.23195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385651 Jy ! Component: 100 - total flux cleaned = 0.049528 Jy ! Total flux subtracted in 100 components = 0.049528 Jy ! Clean residual min=-0.006519 max=0.005454 Jy/beam ! Clean residual mean=-0.000017 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.049528 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.049528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073306Jy sigma=0.467854 ! Fit after self-cal, rms=0.071639Jy sigma=0.456206 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=7.657 mas, bpa=45.11 degrees ! Estimated noise=1.62085 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676136 Jy ! Component: 100 - total flux cleaned = 0.00832417 Jy ! Component: 150 - total flux cleaned = 0.00926432 Jy ! Component: 200 - total flux cleaned = 0.00984353 Jy ! Total flux subtracted in 200 components = 0.00984353 Jy ! Clean residual min=-0.005176 max=0.005030 Jy/beam ! Clean residual mean=-0.000015 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.0593716 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.0593716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070848Jy sigma=0.451477 ! Fit after self-cal, rms=0.070774Jy sigma=0.451087 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 7.657 at 45.11 degrees (North through East) ! Clean map min=-0.005108 max=0.049505 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.96 HN 0.98 KP 1.01 ! LA 0.95 MK 0.98 NL 1.11 OV 0.83 ! SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00 HN 1.03 KP 1.05 ! LA 1.02 MK 1.00 NL 0.83 OV 1.11 ! SC 0.66 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.96 HN 1.03 KP 1.05 ! LA 1.06 MK 0.95 NL 0.89 OV 0.92 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.070774Jy sigma=0.451087 ! Fit after self-cal, rms=0.065620Jy sigma=0.447328 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=7.775 mas, bpa=44.97 degrees ! Estimated noise=1.58997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052423 Jy ! Component: 100 - total flux cleaned = 0.00831792 Jy ! Component: 150 - total flux cleaned = 0.00975821 Jy ! Component: 200 - total flux cleaned = 0.0106047 Jy ! Total flux subtracted in 200 components = 0.0106047 Jy ! Clean residual min=-0.004070 max=0.003288 Jy/beam ! Clean residual mean=-0.000004 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0699763 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 58 components and 0.0699763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065199Jy sigma=0.443479 ! Fit after self-cal, rms=0.064952Jy sigma=0.440775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064952Jy sigma=0.440775 ! Fit after self-cal, rms=0.064156Jy sigma=0.437797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=7.634 mas, bpa=45.2 degrees ! Estimated noise=1.54416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247002 Jy ! Component: 100 - total flux cleaned = 0.00376938 Jy ! Component: 150 - total flux cleaned = 0.00377154 Jy ! Component: 200 - total flux cleaned = 0.00385249 Jy ! Total flux subtracted in 200 components = 0.00385249 Jy ! Clean residual min=-0.003226 max=0.002696 Jy/beam ! Clean residual mean=0.000008 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0738288 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 0.0738288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064046Jy sigma=0.436831 ! Fit after self-cal, rms=0.064143Jy sigma=0.436406 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000872784 Jy ! Component: 100 - total flux cleaned = 0.00094946 Jy ! Component: 150 - total flux cleaned = 0.000984633 Jy ! Component: 200 - total flux cleaned = 0.00101508 Jy ! Total flux subtracted in 200 components = 0.00101508 Jy ! Clean residual min=-0.003223 max=0.002611 Jy/beam ! Clean residual mean=0.000008 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.0748439 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.0748439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064103Jy sigma=0.436092 ! Fit after self-cal, rms=0.064098Jy sigma=0.436049 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064098Jy sigma=0.436049 ! Fit after self-cal, rms=0.064081Jy sigma=0.435911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=7.547 mas, bpa=45.27 degrees ! Estimated noise=1.53033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537023 Jy ! Component: 100 - total flux cleaned = 0.000598763 Jy ! Component: 150 - total flux cleaned = 0.000601188 Jy ! Component: 200 - total flux cleaned = 0.000626431 Jy ! Total flux subtracted in 200 components = 0.000626431 Jy ! Clean residual min=-0.003132 max=0.002558 Jy/beam ! Clean residual mean=0.000007 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0754703 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.0754703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064052Jy sigma=0.435670 ! Fit after self-cal, rms=0.064073Jy sigma=0.435633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4261e-05 Jy ! Component: 100 - total flux cleaned = 4.87728e-05 Jy ! Component: 150 - total flux cleaned = 7.21224e-05 Jy ! Component: 200 - total flux cleaned = 5.01317e-05 Jy ! Total flux subtracted in 200 components = 5.01317e-05 Jy ! Clean residual min=-0.003116 max=0.002521 Jy/beam ! Clean residual mean=0.000007 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0755204 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 113 components and 0.0755204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064056Jy sigma=0.435494 ! Fit after self-cal, rms=0.064054Jy sigma=0.435482 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064054Jy sigma=0.435482 ! Fit after self-cal, rms=0.063885Jy sigma=0.435442 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.448 mas, bmaj=9.622 mas, bpa=35.16 degrees ! Estimated noise=1.91338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00069082 Jy ! Component: 100 - total flux cleaned = -0.000883507 Jy ! Component: 150 - total flux cleaned = -0.000946518 Jy ! Component: 200 - total flux cleaned = -0.000946536 Jy ! Total flux subtracted in 200 components = -0.000946536 Jy ! Clean residual min=-0.003452 max=0.003152 Jy/beam ! Clean residual mean=0.000011 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.0745739 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.0745739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063881Jy sigma=0.435385 ! Fit after self-cal, rms=0.063883Jy sigma=0.435299 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516958 Jy ! Component: 100 - total flux cleaned = -0.000516965 Jy ! Component: 150 - total flux cleaned = -0.000491922 Jy ! Component: 200 - total flux cleaned = -0.000427015 Jy ! Total flux subtracted in 200 components = -0.000427015 Jy ! Clean residual min=-0.003422 max=0.003122 Jy/beam ! Clean residual mean=0.000011 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.0741469 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.0741469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063885Jy sigma=0.435332 ! Fit after self-cal, rms=0.063883Jy sigma=0.435295 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=7.493 mas, bpa=45.33 degrees ! Estimated noise=1.52232 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 7.493 at 45.33 degrees (North through East) ! Clean map min=-0.0029935 max=0.048659 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=7.336 mas, bpa=46.44 degrees ! Estimated noise=2.06147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377824 Jy ! Component: 100 - total flux cleaned = 0.0497724 Jy ! Component: 150 - total flux cleaned = 0.0567426 Jy ! Component: 200 - total flux cleaned = 0.0618001 Jy ! Total flux subtracted in 200 components = 0.0618001 Jy ! Clean residual min=-0.005029 max=0.004087 Jy/beam ! Clean residual mean=-0.000001 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.0618002 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0618002 Jy ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=7.493 mas, bpa=45.33 degrees ! Estimated noise=1.52232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00462458 Jy ! Component: 100 - total flux cleaned = 0.00765206 Jy ! Component: 150 - total flux cleaned = 0.00921887 Jy ! Component: 200 - total flux cleaned = 0.0102607 Jy ! Total flux subtracted in 200 components = 0.0102607 Jy ! Clean residual min=-0.004316 max=0.002905 Jy/beam ! Clean residual mean=0.000005 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.0720608 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 0.0720608 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.448 mas, bmaj=9.622 mas, bpa=35.16 degrees ! Estimated noise=1.91338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.56912e-05 Jy ! Component: 100 - total flux cleaned = 0.000571742 Jy ! Component: 150 - total flux cleaned = 0.000973741 Jy ! Component: 200 - total flux cleaned = 0.00136433 Jy ! Total flux subtracted in 200 components = 0.00136433 Jy ! Clean residual min=-0.003684 max=0.003300 Jy/beam ! Clean residual mean=0.000012 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.0734251 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112069 Jy ! Component: 100 - total flux cleaned = 0.000208017 Jy ! Component: 150 - total flux cleaned = 0.000374995 Jy ! Component: 200 - total flux cleaned = 0.000484484 Jy ! Total flux subtracted in 200 components = 0.000484484 Jy ! Clean residual min=-0.003480 max=0.003195 Jy/beam ! Clean residual mean=0.000013 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0739096 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 91 components and 0.0739096 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=7.493 mas, bpa=45.33 degrees ! Estimated noise=1.52232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304869 Jy ! Component: 100 - total flux cleaned = 0.000406874 Jy ! Component: 150 - total flux cleaned = 0.000547823 Jy ! Component: 200 - total flux cleaned = 0.000625869 Jy ! Total flux subtracted in 200 components = 0.000625869 Jy ! Clean residual min=-0.003331 max=0.002646 Jy/beam ! Clean residual mean=0.000006 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0745355 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.0745355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063924Jy sigma=0.435719 ! Fit after self-cal, rms=0.063905Jy sigma=0.435596 wmodel J0911+8607_S_a_map.mod ! Writing 107 model components to file: J0911+8607_S_a_map.mod wobs J0911+8607_S_a_uvs.fits ! Writing UV FITS file: J0911+8607_S_a_uvs.fits wwins J0911+8607_S_a_map.win ! wwins: Wrote 2 windows to J0911+8607_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112065 Jy ! Component: 100 - total flux cleaned = -0.00116396 Jy ! Component: 150 - total flux cleaned = -0.0012063 Jy ! Component: 200 - total flux cleaned = -0.00104415 Jy ! Component: 250 - total flux cleaned = -0.00108236 Jy ! Component: 300 - total flux cleaned = -0.000895815 Jy ! Component: 350 - total flux cleaned = -0.000715868 Jy ! Component: 400 - total flux cleaned = -0.000610357 Jy ! Component: 450 - total flux cleaned = -0.000407045 Jy ! Component: 500 - total flux cleaned = -0.000275293 Jy ! Component: 550 - total flux cleaned = -0.000179072 Jy ! Component: 600 - total flux cleaned = -0.000178535 Jy ! Component: 650 - total flux cleaned = 6.85882e-06 Jy ! Component: 700 - total flux cleaned = 6.12276e-06 Jy ! Component: 750 - total flux cleaned = 9.57166e-05 Jy ! Component: 800 - total flux cleaned = 6.6252e-05 Jy ! Component: 850 - total flux cleaned = 0.000152202 Jy ! Component: 900 - total flux cleaned = 0.000152018 Jy ! Component: 950 - total flux cleaned = 0.000207229 Jy ! Component: 1000 - total flux cleaned = 0.000179629 Jy ! Component: 1050 - total flux cleaned = 0.000179742 Jy ! Component: 1100 - total flux cleaned = 0.000285274 Jy ! Component: 1150 - total flux cleaned = 0.000389892 Jy ! Component: 1200 - total flux cleaned = 0.000415998 Jy ! Component: 1250 - total flux cleaned = 0.00051753 Jy ! Component: 1300 - total flux cleaned = 0.000567557 Jy ! Component: 1350 - total flux cleaned = 0.000642002 Jy ! Component: 1400 - total flux cleaned = 0.000714684 Jy ! Component: 1450 - total flux cleaned = 0.000762607 Jy ! Component: 1500 - total flux cleaned = 0.000833708 Jy ! Component: 1550 - total flux cleaned = 0.000810345 Jy ! Component: 1600 - total flux cleaned = 0.000810123 Jy ! Component: 1650 - total flux cleaned = 0.000810377 Jy ! Component: 1700 - total flux cleaned = 0.000810034 Jy ! Component: 1750 - total flux cleaned = 0.000742885 Jy ! Component: 1800 - total flux cleaned = 0.000720967 Jy ! Component: 1850 - total flux cleaned = 0.000764429 Jy ! Component: 1900 - total flux cleaned = 0.000742834 Jy ! Component: 1950 - total flux cleaned = 0.000720829 Jy ! Component: 2000 - total flux cleaned = 0.000657215 Jy ! Component: 2050 - total flux cleaned = 0.000636217 Jy ! Component: 2100 - total flux cleaned = 0.000615334 Jy ! Component: 2150 - total flux cleaned = 0.00065644 Jy ! Component: 2200 - total flux cleaned = 0.000615911 Jy ! Component: 2250 - total flux cleaned = 0.000636026 Jy ! Component: 2300 - total flux cleaned = 0.000635716 Jy ! Component: 2350 - total flux cleaned = 0.000616033 Jy ! Component: 2400 - total flux cleaned = 0.000674999 Jy ! Component: 2450 - total flux cleaned = 0.000674966 Jy ! Component: 2500 - total flux cleaned = 0.000713451 Jy ! Component: 2550 - total flux cleaned = 0.000751739 Jy ! Component: 2600 - total flux cleaned = 0.000637974 Jy ! Component: 2650 - total flux cleaned = 0.000713312 Jy ! Component: 2700 - total flux cleaned = 0.000787818 Jy ! Component: 2750 - total flux cleaned = 0.000751075 Jy ! Component: 2800 - total flux cleaned = 0.000732981 Jy ! Component: 2850 - total flux cleaned = 0.000824032 Jy ! Component: 2900 - total flux cleaned = 0.000806138 Jy ! Component: 2950 - total flux cleaned = 0.000859882 Jy ! Component: 3000 - total flux cleaned = 0.000913131 Jy ! Component: 3050 - total flux cleaned = 0.000948458 Jy ! Component: 3100 - total flux cleaned = 0.000948353 Jy ! Component: 3150 - total flux cleaned = 0.000948579 Jy ! Component: 3200 - total flux cleaned = 0.000965902 Jy ! Component: 3250 - total flux cleaned = 0.00105137 Jy ! Component: 3300 - total flux cleaned = 0.00113613 Jy ! Component: 3350 - total flux cleaned = 0.00115295 Jy ! Component: 3400 - total flux cleaned = 0.00128684 Jy ! Component: 3450 - total flux cleaned = 0.00135326 Jy ! Component: 3500 - total flux cleaned = 0.00143571 Jy ! Component: 3550 - total flux cleaned = 0.00150117 Jy ! Component: 3600 - total flux cleaned = 0.00153377 Jy ! Component: 3650 - total flux cleaned = 0.00159865 Jy ! Component: 3700 - total flux cleaned = 0.00171118 Jy ! Component: 3750 - total flux cleaned = 0.00175927 Jy ! Component: 3800 - total flux cleaned = 0.00180706 Jy ! Component: 3850 - total flux cleaned = 0.00191771 Jy ! Component: 3900 - total flux cleaned = 0.0019805 Jy ! Component: 3950 - total flux cleaned = 0.0019963 Jy ! Component: 4000 - total flux cleaned = 0.00202747 Jy ! Component: 4050 - total flux cleaned = 0.00210474 Jy ! Total flux subtracted in 4096 components = 0.00216622 Jy ! Clean residual min=-0.000941 max=0.000866 Jy/beam ! Clean residual mean=0.000003 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.0767017 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 394 components and 0.0767018 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0911+8607_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 7.493 at 45.33 degrees (North through East) ! Clean map min=-0.0026084 max=0.048072 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0911+8607_S_a_map.fits wmodel /image_prod/ug002_uva//J0911+8607_S_a_map.mod ! Writing 394 model components to file: /image_prod/ug002_uva//J0911+8607_S_a_map.mod wobs /image_prod/ug002_uva//J0911+8607_S_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0911+8607_S_a_uvs.fits wwins /image_prod/ug002_uva//J0911+8607_S_a_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0911+8607_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.048072 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00027606 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.72279 1.72279 3.44559 6.89117 13.7823 27.5647 55.1294 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.048 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 174.135 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0911+8607_S_a_dfm.log closed on Wed Mar 4 22:52:13 2020