! Started logfile: /image_prod/ug002_uva//J0856-1105_X_b_dfm.log on Wed Mar  4 22:43:14 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0856-1105_X_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0856-1105_X_b_uva.fits
! AN table 1: 18 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.898148 visibilities/baseline/integration-bin.
! Found source: J0856-1105
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6984 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0856-1105_X_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033009Jy  sigma=8.644797
! Fit after  self-cal, rms=0.724509Jy  sigma=6.093635
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7177 mas, bmaj=3.49 mas, bpa=-17.9 degrees
! Estimated noise=1.48761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204293 Jy
! Component: 100  -  total flux cleaned = 0.254879 Jy
! Total flux subtracted in 100 components = 0.254879 Jy
! Clean residual min=-0.009751 max=0.021382 Jy/beam
! Clean residual mean=0.000032 rms=0.002642 Jy/beam
! Combined flux in latest and established models = 0.254879 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.254879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088373Jy  sigma=0.695597
! Fit after  self-cal, rms=0.088346Jy  sigma=0.695390
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232715 Jy
! Component: 100  -  total flux cleaned = 0.0358468 Jy
! Total flux subtracted in 100 components = 0.0358468 Jy
! Clean residual min=-0.008324 max=0.017177 Jy/beam
! Clean residual mean=0.000020 rms=0.002059 Jy/beam
! Combined flux in latest and established models = 0.290726 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 0.290726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078087Jy  sigma=0.604295
! Fit after  self-cal, rms=0.078068Jy  sigma=0.604152
! Inverting map 
! Added new window around map position (-1.8, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157221 Jy
! Component: 100  -  total flux cleaned = 0.0213354 Jy
! Total flux subtracted in 100 components = 0.0213354 Jy
! Clean residual min=-0.007121 max=0.010763 Jy/beam
! Clean residual mean=0.000014 rms=0.001701 Jy/beam
! Combined flux in latest and established models = 0.312061 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.312061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073513Jy  sigma=0.562762
! Fit after  self-cal, rms=0.073180Jy  sigma=0.559919
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9498 mas, bmaj=3.696 mas, bpa=-16.9 degrees
! Estimated noise=1.02373 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123823 Jy
! Component: 100  -  total flux cleaned = 0.0162534 Jy
! Component: 150  -  total flux cleaned = 0.016957 Jy
! Component: 200  -  total flux cleaned = 0.0175402 Jy
! Total flux subtracted in 200 components = 0.0175402 Jy
! Clean residual min=-0.006648 max=0.008003 Jy/beam
! Clean residual mean=0.000014 rms=0.001796 Jy/beam
! Combined flux in latest and established models = 0.329601 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 49 components and 0.329601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070717Jy  sigma=0.536786
! Fit after  self-cal, rms=0.070602Jy  sigma=0.535847
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9498 x 3.696 at -16.9 degrees (North through East)
! Clean map  min=-0.0063224  max=0.26783 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.02     HN        1.02     KP        1.07     
!   LA        1.01     MK        1.02     NL        1.09     OV        0.94     
!   PT        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.04     HN        0.99     KP        1.07     
!   LA        1.02     MK        1.00     NL        1.10     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.01     HN        1.00     KP        1.06     
!   LA        1.04     MK        1.02     NL        1.08     OV        0.93     
!   PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        1.02     KP        1.06     
!   LA        1.02     MK        1.03     NL        1.10     OV        0.95     
!   PT        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.05     HN        0.99     KP        1.07     
!   LA        1.01     MK        1.03     NL        1.09     OV        0.94     
!   PT        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.04     HN        1.01     KP        1.07     
!   LA        0.99     MK        1.01     NL        1.09     OV        0.92     
!   PT        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.02     HN        1.01     KP        1.05     
!   LA        1.02     MK        0.99     NL        1.09     OV        0.94     
!   PT        0.91     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        0.99     KP        1.07     
!   LA        1.02     MK        1.01     NL        1.09     OV        0.94     
!   PT        0.88     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.03     HN        1.00     KP        1.04     
!   LA        1.02     MK        1.02     NL        1.09     OV        0.91     
!   PT        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.02     HN        1.02     KP        1.07     
!   LA        1.01     MK        0.98     NL        1.09     OV        0.94     
!   PT        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.03     HN        0.98     KP        1.08     
!   LA        1.01     MK        1.02     NL        1.06     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.05     HN        1.06     KP        1.06     
!   LA        1.04     MK        1.03     NL        1.08     OV        0.90     
!   PT        0.92     
! 
! 
! Fit before self-cal, rms=0.070602Jy  sigma=0.535847
! Fit after  self-cal, rms=0.064201Jy  sigma=0.496140
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9594 mas, bmaj=3.614 mas, bpa=-16.76 degrees
! Estimated noise=1.01742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000730281 Jy
! Component: 100  -  total flux cleaned = 0.000738844 Jy
! Component: 150  -  total flux cleaned = 0.000496823 Jy
! Component: 200  -  total flux cleaned = -8.65687e-05 Jy
! Total flux subtracted in 200 components = -8.65687e-05 Jy
! Clean residual min=-0.004237 max=0.004161 Jy/beam
! Clean residual mean=0.000004 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.329515 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.329515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063410Jy  sigma=0.491640
! Fit after  self-cal, rms=0.063391Jy  sigma=0.491407
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063391Jy  sigma=0.491407
! Fit after  self-cal, rms=0.063591Jy  sigma=0.470451
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9577 mas, bmaj=3.638 mas, bpa=-16.75 degrees
! Estimated noise=1.02201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000885227 Jy
! Component: 100  -  total flux cleaned = -0.000646369 Jy
! Component: 150  -  total flux cleaned = -0.000499542 Jy
! Component: 200  -  total flux cleaned = -0.000414845 Jy
! Total flux subtracted in 200 components = -0.000414845 Jy
! Clean residual min=-0.002522 max=0.002358 Jy/beam
! Clean residual mean=0.000002 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.3291 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.3291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063487Jy  sigma=0.469497
! Fit after  self-cal, rms=0.063535Jy  sigma=0.469394
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116599 Jy
! Component: 100  -  total flux cleaned = -7.90997e-05 Jy
! Component: 150  -  total flux cleaned = -4.52582e-05 Jy
! Component: 200  -  total flux cleaned = -1.21751e-05 Jy
! Total flux subtracted in 200 components = -1.21751e-05 Jy
! Clean residual min=-0.002382 max=0.002349 Jy/beam
! Clean residual mean=0.000002 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.329088 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 89 components and 0.329088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063493Jy  sigma=0.469068
! Fit after  self-cal, rms=0.063491Jy  sigma=0.469052
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063491Jy  sigma=0.469052
! Fit after  self-cal, rms=0.063320Jy  sigma=0.468772
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9575 mas, bmaj=3.63 mas, bpa=-16.74 degrees
! Estimated noise=1.02149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000278521 Jy
! Component: 100  -  total flux cleaned = -0.000237333 Jy
! Component: 150  -  total flux cleaned = -9.1536e-05 Jy
! Component: 200  -  total flux cleaned = 3.88616e-05 Jy
! Total flux subtracted in 200 components = 3.88616e-05 Jy
! Clean residual min=-0.002215 max=0.002329 Jy/beam
! Clean residual mean=0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.329127 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.329127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063266Jy  sigma=0.468330
! Fit after  self-cal, rms=0.063264Jy  sigma=0.468310
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, -11.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133384 Jy
! Component: 100  -  total flux cleaned = 0.00140592 Jy
! Component: 150  -  total flux cleaned = 0.00140658 Jy
! Component: 200  -  total flux cleaned = 0.00149586 Jy
! Total flux subtracted in 200 components = 0.00149586 Jy
! Clean residual min=-0.001958 max=0.002008 Jy/beam
! Clean residual mean=0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.330623 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 117 components and 0.330623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063127Jy  sigma=0.467365
! Fit after  self-cal, rms=0.063123Jy  sigma=0.467337
! Inverting map 
! Added new window around map position (3, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110478 Jy
! Component: 100  -  total flux cleaned = 0.00162708 Jy
! Component: 150  -  total flux cleaned = 0.00176485 Jy
! Component: 200  -  total flux cleaned = 0.0016838 Jy
! Total flux subtracted in 200 components = 0.0016838 Jy
! Clean residual min=-0.001870 max=0.001997 Jy/beam
! Clean residual mean=0.000000 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.332306 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 132 components and 0.332306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063025Jy  sigma=0.466644
! Fit after  self-cal, rms=0.063023Jy  sigma=0.466617
! Inverting map 
! Added new window around map position (17.6, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000992218 Jy
! Component: 100  -  total flux cleaned = 0.00135919 Jy
! Component: 150  -  total flux cleaned = 0.00144133 Jy
! Component: 200  -  total flux cleaned = 0.00151637 Jy
! Total flux subtracted in 200 components = 0.00151637 Jy
! Clean residual min=-0.001819 max=0.001611 Jy/beam
! Clean residual mean=0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.333823 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 148 components and 0.333823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062938Jy  sigma=0.466048
! Fit after  self-cal, rms=0.062937Jy  sigma=0.466032
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062937Jy  sigma=0.466032
! Fit after  self-cal, rms=0.062773Jy  sigma=0.465897
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.253 mas, bmaj=4.405 mas, bpa=-3.243 degrees
! Estimated noise=1.21357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000319816 Jy
! Component: 100  -  total flux cleaned = 0.000452244 Jy
! Component: 150  -  total flux cleaned = 0.000454289 Jy
! Component: 200  -  total flux cleaned = 0.000455183 Jy
! Total flux subtracted in 200 components = 0.000455183 Jy
! Clean residual min=-0.001786 max=0.001591 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.334278 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 172 components and 0.334278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062745Jy  sigma=0.465717
! Fit after  self-cal, rms=0.062743Jy  sigma=0.465709
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123755 Jy
! Component: 100  -  total flux cleaned = 0.000122671 Jy
! Component: 150  -  total flux cleaned = 0.000122676 Jy
! Component: 200  -  total flux cleaned = 0.000141337 Jy
! Total flux subtracted in 200 components = 0.000141337 Jy
! Clean residual min=-0.001758 max=0.001601 Jy/beam
! Clean residual mean=-0.000002 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.334419 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 192 components and 0.334419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062730Jy  sigma=0.465623
! Fit after  self-cal, rms=0.062730Jy  sigma=0.465620
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.957 mas, bmaj=3.628 mas, bpa=-16.73 degrees
! Estimated noise=1.02041 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.957 x 3.628 at -16.73 degrees (North through East)
! Clean map  min=-0.0018806  max=0.26795 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7224 mas, bmaj=3.428 mas, bpa=-17.81 degrees
! Estimated noise=1.48503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203843 Jy
! Component: 100  -  total flux cleaned = 0.253713 Jy
! Component: 150  -  total flux cleaned = 0.276653 Jy
! Component: 200  -  total flux cleaned = 0.290888 Jy
! Total flux subtracted in 200 components = 0.290888 Jy
! Clean residual min=-0.004202 max=0.007798 Jy/beam
! Clean residual mean=0.000014 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.290888 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.290888 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.957 mas, bmaj=3.628 mas, bpa=-16.73 degrees
! Estimated noise=1.02041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157113 Jy
! Component: 100  -  total flux cleaned = 0.024461 Jy
! Component: 150  -  total flux cleaned = 0.0297483 Jy
! Component: 200  -  total flux cleaned = 0.0332451 Jy
! Total flux subtracted in 200 components = 0.0332451 Jy
! Clean residual min=-0.002795 max=0.002807 Jy/beam
! Clean residual mean=0.000002 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.324133 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 67 components and 0.324133 Jy
! Inverting map 
! Added new window around map position (-17.4, 18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297192 Jy
! Component: 100  -  total flux cleaned = 0.00487759 Jy
! Component: 150  -  total flux cleaned = 0.00579662 Jy
! Component: 200  -  total flux cleaned = 0.00617382 Jy
! Total flux subtracted in 200 components = 0.00617382 Jy
! Clean residual min=-0.002325 max=0.002090 Jy/beam
! Clean residual mean=0.000001 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.330307 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 92 components and 0.330307 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.253 mas, bmaj=4.405 mas, bpa=-3.243 degrees
! Estimated noise=1.21357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000806182 Jy
! Component: 100  -  total flux cleaned = 0.00111906 Jy
! Component: 150  -  total flux cleaned = 0.00148373 Jy
! Component: 200  -  total flux cleaned = 0.0018937 Jy
! Total flux subtracted in 200 components = 0.0018937 Jy
! Clean residual min=-0.002033 max=0.001633 Jy/beam
! Clean residual mean=-0.000000 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.3322 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324843 Jy
! Component: 100  -  total flux cleaned = 0.000401261 Jy
! Component: 150  -  total flux cleaned = 0.000469473 Jy
! Component: 200  -  total flux cleaned = 0.000470987 Jy
! Total flux subtracted in 200 components = 0.000470987 Jy
! Clean residual min=-0.002023 max=0.001534 Jy/beam
! Clean residual mean=-0.000001 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.332671 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 145 components and 0.332671 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.957 mas, bmaj=3.628 mas, bpa=-16.73 degrees
! Estimated noise=1.02041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000488161 Jy
! Component: 100  -  total flux cleaned = -0.000540303 Jy
! Component: 150  -  total flux cleaned = -0.000342933 Jy
! Component: 200  -  total flux cleaned = -0.000248337 Jy
! Total flux subtracted in 200 components = -0.000248337 Jy
! Clean residual min=-0.001929 max=0.001685 Jy/beam
! Clean residual mean=-0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.332423 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 168 components and 0.332423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062817Jy  sigma=0.466181
! Fit after  self-cal, rms=0.062800Jy  sigma=0.466057
wmodel J0856-1105_X_b_map.mod
! Writing 168 model components to file: J0856-1105_X_b_map.mod
wobs   J0856-1105_X_b_uvs.fits
! Writing UV FITS file: J0856-1105_X_b_uvs.fits
wwins  J0856-1105_X_b_map.win
! wwins: Wrote 6 windows to J0856-1105_X_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000727528 Jy
! Component: 100  -  total flux cleaned = -0.00109473 Jy
! Component: 150  -  total flux cleaned = -0.00123733 Jy
! Component: 200  -  total flux cleaned = -0.00129099 Jy
! Component: 250  -  total flux cleaned = -0.00144894 Jy
! Component: 300  -  total flux cleaned = -0.00149983 Jy
! Component: 350  -  total flux cleaned = -0.0015497 Jy
! Component: 400  -  total flux cleaned = -0.00167193 Jy
! Component: 450  -  total flux cleaned = -0.0017196 Jy
! Component: 500  -  total flux cleaned = -0.00183694 Jy
! Component: 550  -  total flux cleaned = -0.00185992 Jy
! Component: 600  -  total flux cleaned = -0.00192854 Jy
! Component: 650  -  total flux cleaned = -0.00201851 Jy
! Component: 700  -  total flux cleaned = -0.00199641 Jy
! Component: 750  -  total flux cleaned = -0.00210571 Jy
! Component: 800  -  total flux cleaned = -0.0021703 Jy
! Component: 850  -  total flux cleaned = -0.00217024 Jy
! Component: 900  -  total flux cleaned = -0.00221249 Jy
! Component: 950  -  total flux cleaned = -0.00227518 Jy
! Component: 1000  -  total flux cleaned = -0.00233683 Jy
! Component: 1050  -  total flux cleaned = -0.00239789 Jy
! Component: 1100  -  total flux cleaned = -0.00245873 Jy
! Component: 1150  -  total flux cleaned = -0.00255862 Jy
! Component: 1200  -  total flux cleaned = -0.00263761 Jy
! Component: 1250  -  total flux cleaned = -0.0027943 Jy
! Component: 1300  -  total flux cleaned = -0.00277461 Jy
! Component: 1350  -  total flux cleaned = -0.00283218 Jy
! Component: 1400  -  total flux cleaned = -0.00292741 Jy
! Component: 1450  -  total flux cleaned = -0.00298389 Jy
! Component: 1500  -  total flux cleaned = -0.00311481 Jy
! Component: 1550  -  total flux cleaned = -0.00318911 Jy
! Component: 1600  -  total flux cleaned = -0.00324436 Jy
! Component: 1650  -  total flux cleaned = -0.0033536 Jy
! Component: 1700  -  total flux cleaned = -0.00338938 Jy
! Component: 1750  -  total flux cleaned = -0.00344313 Jy
! Component: 1800  -  total flux cleaned = -0.0034965 Jy
! Component: 1850  -  total flux cleaned = -0.00356709 Jy
! Component: 1900  -  total flux cleaned = -0.00361962 Jy
! Component: 1950  -  total flux cleaned = -0.00368901 Jy
! Component: 2000  -  total flux cleaned = -0.00380966 Jy
! Component: 2050  -  total flux cleaned = -0.00387788 Jy
! Component: 2100  -  total flux cleaned = -0.00397959 Jy
! Component: 2150  -  total flux cleaned = -0.00403019 Jy
! Component: 2200  -  total flux cleaned = -0.00409726 Jy
! Component: 2250  -  total flux cleaned = -0.00416385 Jy
! Component: 2300  -  total flux cleaned = -0.00424638 Jy
! Component: 2350  -  total flux cleaned = -0.00437782 Jy
! Component: 2400  -  total flux cleaned = -0.00442663 Jy
! Component: 2450  -  total flux cleaned = -0.00457218 Jy
! Component: 2500  -  total flux cleaned = -0.00468472 Jy
! Component: 2550  -  total flux cleaned = -0.00470071 Jy
! Component: 2600  -  total flux cleaned = -0.00482747 Jy
! Component: 2650  -  total flux cleaned = -0.00492203 Jy
! Component: 2700  -  total flux cleaned = -0.00504733 Jy
! Component: 2750  -  total flux cleaned = -0.00510962 Jy
! Component: 2800  -  total flux cleaned = -0.00518708 Jy
! Component: 2850  -  total flux cleaned = -0.00527942 Jy
! Component: 2900  -  total flux cleaned = -0.00538631 Jy
! Component: 2950  -  total flux cleaned = -0.0055229 Jy
! Component: 3000  -  total flux cleaned = -0.00562843 Jy
! Component: 3050  -  total flux cleaned = -0.00568823 Jy
! Component: 3100  -  total flux cleaned = -0.00574792 Jy
! Component: 3150  -  total flux cleaned = -0.00583696 Jy
! Component: 3200  -  total flux cleaned = -0.0059547 Jy
! Component: 3250  -  total flux cleaned = -0.00605728 Jy
! Component: 3300  -  total flux cleaned = -0.00615913 Jy
! Component: 3350  -  total flux cleaned = -0.0062026 Jy
! Component: 3400  -  total flux cleaned = -0.00630332 Jy
! Component: 3450  -  total flux cleaned = -0.00634629 Jy
! Component: 3500  -  total flux cleaned = -0.00644603 Jy
! Component: 3550  -  total flux cleaned = -0.00647437 Jy
! Component: 3600  -  total flux cleaned = -0.00668558 Jy
! Component: 3650  -  total flux cleaned = -0.00671343 Jy
! Component: 3700  -  total flux cleaned = -0.00678304 Jy
! Component: 3750  -  total flux cleaned = -0.00686613 Jy
! Component: 3800  -  total flux cleaned = -0.00694879 Jy
! Component: 3850  -  total flux cleaned = -0.00699008 Jy
! Component: 3900  -  total flux cleaned = -0.00709899 Jy
! Component: 3950  -  total flux cleaned = -0.00718019 Jy
! Component: 4000  -  total flux cleaned = -0.00720721 Jy
! Component: 4050  -  total flux cleaned = -0.00727431 Jy
! Total flux subtracted in 4096 components = -0.00738097 Jy
! Clean residual min=-0.000823 max=0.000904 Jy/beam
! Clean residual mean=-0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.325042 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 440 components and 0.325042 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0856-1105_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.957 x 3.628 at -16.73 degrees (North through East)
! Clean map  min=-0.001298  max=0.26918 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0856-1105_X_b_map.fits
wmodel /image_prod/ug002_uva//J0856-1105_X_b_map.mod
! Writing 440 model components to file: /image_prod/ug002_uva//J0856-1105_X_b_map.mod
wobs   /image_prod/ug002_uva//J0856-1105_X_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0856-1105_X_b_uvs.fits
wwins  /image_prod/ug002_uva//J0856-1105_X_b_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0856-1105_X_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.269185 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000236214 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.263255 0.263255 0.52651 1.05302 2.10604 4.21208 8.42416 16.8483 33.6966 67.3933
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.269 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1139.58 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0856-1105_X_b_dfm.log closed on Wed Mar  4 22:43:18 2020