! Started logfile: /image_prod/ug002_uva//J0856-1105_S_j_dfm.log on Wed Mar 4 22:42:51 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0856-1105_S_j_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0856-1105_S_j_uva.fits ! AN table 1: 6 integrations on 10 of 10 possible baselines. ! AN table 2: 6 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.908333 visibilities/baseline/integration-bin. ! Found source: J0856-1105 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 327 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0856-1105_S_j] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.974771Jy sigma=6.746278 ! Fit after self-cal, rms=0.745739Jy sigma=5.156514 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=5.522 mas, bpa=-9.944 degrees ! Estimated noise=6.37902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205582 Jy ! Component: 100 - total flux cleaned = 0.251097 Jy ! Total flux subtracted in 100 components = 0.251097 Jy ! Clean residual min=-0.031654 max=0.040598 Jy/beam ! Clean residual mean=0.000091 rms=0.008719 Jy/beam ! Combined flux in latest and established models = 0.251097 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.251097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093924Jy sigma=0.630936 ! Fit after self-cal, rms=0.093929Jy sigma=0.630899 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.522 mas, bmaj=6.188 mas, bpa=-10.46 degrees ! Estimated noise=5.7474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172887 Jy ! Component: 100 - total flux cleaned = 0.0220252 Jy ! Component: 150 - total flux cleaned = 0.0223357 Jy ! Component: 200 - total flux cleaned = 0.0226263 Jy ! Total flux subtracted in 200 components = 0.0226263 Jy ! Clean residual min=-0.021583 max=0.038184 Jy/beam ! Clean residual mean=0.000095 rms=0.008143 Jy/beam ! Combined flux in latest and established models = 0.273723 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.273723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090929Jy sigma=0.596315 ! Fit after self-cal, rms=0.090756Jy sigma=0.595152 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.522 x 6.188 at -10.46 degrees (North through East) ! Clean map min=-0.020229 max=0.26512 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 LA 0.92 MK 1.05 NL 0.91 ! OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 MK 1.08 NL 0.90 OV 0.88 ! SC 0.89 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.02 LA 0.89 MK 1.02 NL 0.96 ! OV 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.54 MK 1.01 NL 0.94 OV 0.84 ! SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.96 LA 0.88 MK 0.98 NL 0.96 ! OV 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.31 MK 1.05 NL 0.88 OV 0.89 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.090756Jy sigma=0.595152 ! Fit after self-cal, rms=0.078887Jy sigma=0.433708 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=6.2 mas, bpa=-8.88 degrees ! Estimated noise=5.8068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183583 Jy ! Component: 100 - total flux cleaned = 0.00184187 Jy ! Component: 150 - total flux cleaned = 0.00207883 Jy ! Component: 200 - total flux cleaned = 0.00218394 Jy ! Total flux subtracted in 200 components = 0.00218394 Jy ! Clean residual min=-0.009138 max=0.011948 Jy/beam ! Clean residual mean=0.000013 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.275907 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.275907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078370Jy sigma=0.428604 ! Fit after self-cal, rms=0.078836Jy sigma=0.427197 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078836Jy sigma=0.427197 ! Fit after self-cal, rms=0.079430Jy sigma=0.426934 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=6.193 mas, bpa=-8.794 degrees ! Estimated noise=5.82853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141853 Jy ! Component: 100 - total flux cleaned = 0.00177275 Jy ! Component: 150 - total flux cleaned = 0.00192218 Jy ! Component: 200 - total flux cleaned = 0.00205302 Jy ! Total flux subtracted in 200 components = 0.00205302 Jy ! Clean residual min=-0.009041 max=0.010807 Jy/beam ! Clean residual mean=0.000014 rms=0.002335 Jy/beam ! Combined flux in latest and established models = 0.27796 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.27796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079214Jy sigma=0.425281 ! Fit after self-cal, rms=0.079167Jy sigma=0.425082 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (73, -40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824492 Jy ! Component: 100 - total flux cleaned = 0.00858877 Jy ! Component: 150 - total flux cleaned = 0.00901459 Jy ! Component: 200 - total flux cleaned = 0.00949747 Jy ! Total flux subtracted in 200 components = 0.00949747 Jy ! Clean residual min=-0.007068 max=0.006328 Jy/beam ! Clean residual mean=0.000013 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.287458 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.287458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077612Jy sigma=0.418032 ! Fit after self-cal, rms=0.077540Jy sigma=0.417150 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077540Jy sigma=0.417150 ! Fit after self-cal, rms=0.077137Jy sigma=0.416246 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=6.192 mas, bpa=-8.812 degrees ! Estimated noise=5.82941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036835 Jy ! Component: 100 - total flux cleaned = 0.00423786 Jy ! Component: 150 - total flux cleaned = 0.00489183 Jy ! Component: 200 - total flux cleaned = 0.00561514 Jy ! Total flux subtracted in 200 components = 0.00561514 Jy ! Clean residual min=-0.006340 max=0.006149 Jy/beam ! Clean residual mean=0.000014 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.293073 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.293073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076617Jy sigma=0.414775 ! Fit after self-cal, rms=0.076626Jy sigma=0.414556 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151146 Jy ! Component: 100 - total flux cleaned = 0.00233343 Jy ! Component: 150 - total flux cleaned = 0.00276009 Jy ! Component: 200 - total flux cleaned = 0.00309446 Jy ! Total flux subtracted in 200 components = 0.00309446 Jy ! Clean residual min=-0.005846 max=0.006047 Jy/beam ! Clean residual mean=0.000011 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.296167 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.296167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076432Jy sigma=0.414266 ! Fit after self-cal, rms=0.076443Jy sigma=0.414227 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076443Jy sigma=0.414227 ! Fit after self-cal, rms=0.076478Jy sigma=0.413591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.878 mas, bmaj=13.21 mas, bpa=-11.4 degrees ! Estimated noise=8.9122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272189 Jy ! Component: 100 - total flux cleaned = 0.00333195 Jy ! Component: 150 - total flux cleaned = 0.0032833 Jy ! Component: 200 - total flux cleaned = 0.00308423 Jy ! Total flux subtracted in 200 components = 0.00308423 Jy ! Clean residual min=-0.006929 max=0.006822 Jy/beam ! Clean residual mean=0.000010 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.299251 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.299251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076375Jy sigma=0.413684 ! Fit after self-cal, rms=0.076386Jy sigma=0.413632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000786201 Jy ! Component: 100 - total flux cleaned = 0.000565774 Jy ! Component: 150 - total flux cleaned = 0.000321359 Jy ! Component: 200 - total flux cleaned = 1.23643e-05 Jy ! Total flux subtracted in 200 components = 1.23643e-05 Jy ! Clean residual min=-0.006762 max=0.006795 Jy/beam ! Clean residual mean=0.000003 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 0.299264 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 0.299264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076334Jy sigma=0.413650 ! Fit after self-cal, rms=0.076336Jy sigma=0.413635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.191 mas, bpa=-8.791 degrees ! Estimated noise=5.83899 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.494 x 6.191 at -8.791 degrees (North through East) ! Clean map min=-0.0067838 max=0.26422 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.257 mas, bmaj=5.593 mas, bpa=-8.796 degrees ! Estimated noise=6.43798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204489 Jy ! Component: 100 - total flux cleaned = 0.249852 Jy ! Component: 150 - total flux cleaned = 0.268346 Jy ! Component: 200 - total flux cleaned = 0.280038 Jy ! Total flux subtracted in 200 components = 0.280038 Jy ! Clean residual min=-0.012273 max=0.010322 Jy/beam ! Clean residual mean=0.000023 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.280038 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.280038 Jy ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.191 mas, bpa=-8.791 degrees ! Estimated noise=5.83899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00729789 Jy ! Component: 100 - total flux cleaned = 0.0111781 Jy ! Component: 150 - total flux cleaned = 0.0129008 Jy ! Component: 200 - total flux cleaned = 0.0143752 Jy ! Total flux subtracted in 200 components = 0.0143752 Jy ! Clean residual min=-0.007715 max=0.006882 Jy/beam ! Clean residual mean=0.000019 rms=0.001985 Jy/beam ! Combined flux in latest and established models = 0.294413 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.294413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.878 mas, bmaj=13.21 mas, bpa=-11.4 degrees ! Estimated noise=8.9122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570618 Jy ! Component: 100 - total flux cleaned = 0.00664752 Jy ! Component: 150 - total flux cleaned = 0.00723347 Jy ! Component: 200 - total flux cleaned = 0.00784684 Jy ! Total flux subtracted in 200 components = 0.00784684 Jy ! Clean residual min=-0.007231 max=0.008106 Jy/beam ! Clean residual mean=0.000009 rms=0.002180 Jy/beam ! Combined flux in latest and established models = 0.30226 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504439 Jy ! Component: 100 - total flux cleaned = 0.000918418 Jy ! Component: 150 - total flux cleaned = 0.00119525 Jy ! Component: 200 - total flux cleaned = 0.00113869 Jy ! Total flux subtracted in 200 components = 0.00113869 Jy ! Clean residual min=-0.006700 max=0.007374 Jy/beam ! Clean residual mean=-0.000002 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 0.303399 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 78 components and 0.303399 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.191 mas, bpa=-8.791 degrees ! Estimated noise=5.83899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000589011 Jy ! Component: 100 - total flux cleaned = 0.000256264 Jy ! Component: 150 - total flux cleaned = 0.00118621 Jy ! Component: 200 - total flux cleaned = 0.0019012 Jy ! Total flux subtracted in 200 components = 0.0019012 Jy ! Clean residual min=-0.005916 max=0.006548 Jy/beam ! Clean residual mean=-0.000001 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.3053 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.3053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076411Jy sigma=0.415076 ! Fit after self-cal, rms=0.076413Jy sigma=0.414779 wmodel J0856-1105_S_j_map.mod ! Writing 90 model components to file: J0856-1105_S_j_map.mod wobs J0856-1105_S_j_uvs.fits ! Writing UV FITS file: J0856-1105_S_j_uvs.fits wwins J0856-1105_S_j_map.win ! wwins: Wrote 2 windows to J0856-1105_S_j_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155466 Jy ! Component: 100 - total flux cleaned = 0.00176639 Jy ! Component: 150 - total flux cleaned = 0.00140573 Jy ! Component: 200 - total flux cleaned = 0.000980661 Jy ! Component: 250 - total flux cleaned = 0.000505058 Jy ! Component: 300 - total flux cleaned = -8.09537e-05 Jy ! Component: 350 - total flux cleaned = -0.00028428 Jy ! Component: 400 - total flux cleaned = -0.000350189 Jy ! Component: 450 - total flux cleaned = -0.000534601 Jy ! Component: 500 - total flux cleaned = -0.000709711 Jy ! Component: 550 - total flux cleaned = -0.000766461 Jy ! Component: 600 - total flux cleaned = -0.000982993 Jy ! Component: 650 - total flux cleaned = -0.00124407 Jy ! Component: 700 - total flux cleaned = -0.00149635 Jy ! Component: 750 - total flux cleaned = -0.00178899 Jy ! Component: 800 - total flux cleaned = -0.00197632 Jy ! Component: 850 - total flux cleaned = -0.00220303 Jy ! Component: 900 - total flux cleaned = -0.00237968 Jy ! Component: 950 - total flux cleaned = -0.00255041 Jy ! Component: 1000 - total flux cleaned = -0.00267361 Jy ! Component: 1050 - total flux cleaned = -0.00267392 Jy ! Component: 1100 - total flux cleaned = -0.00275331 Jy ! Component: 1150 - total flux cleaned = -0.0028305 Jy ! Component: 1200 - total flux cleaned = -0.00279412 Jy ! Component: 1250 - total flux cleaned = -0.00286663 Jy ! Component: 1300 - total flux cleaned = -0.00283038 Jy ! Component: 1350 - total flux cleaned = -0.00283034 Jy ! Component: 1400 - total flux cleaned = -0.00279612 Jy ! Component: 1450 - total flux cleaned = -0.00276259 Jy ! Component: 1500 - total flux cleaned = -0.00269685 Jy ! Component: 1550 - total flux cleaned = -0.00272883 Jy ! Component: 1600 - total flux cleaned = -0.00272831 Jy ! Component: 1650 - total flux cleaned = -0.00269725 Jy ! Component: 1700 - total flux cleaned = -0.00272765 Jy ! Component: 1750 - total flux cleaned = -0.00275717 Jy ! Component: 1800 - total flux cleaned = -0.00278637 Jy ! Component: 1850 - total flux cleaned = -0.0029302 Jy ! Component: 1900 - total flux cleaned = -0.00304371 Jy ! Component: 1950 - total flux cleaned = -0.00318338 Jy ! Component: 2000 - total flux cleaned = -0.00329349 Jy ! Component: 2050 - total flux cleaned = -0.0034835 Jy ! Component: 2100 - total flux cleaned = -0.00351033 Jy ! Component: 2150 - total flux cleaned = -0.00359001 Jy ! Component: 2200 - total flux cleaned = -0.00366883 Jy ! Component: 2250 - total flux cleaned = -0.00374706 Jy ! Component: 2300 - total flux cleaned = -0.00382443 Jy ! Component: 2350 - total flux cleaned = -0.00392679 Jy ! Component: 2400 - total flux cleaned = -0.00397758 Jy ! Component: 2450 - total flux cleaned = -0.00407836 Jy ! Component: 2500 - total flux cleaned = -0.0041785 Jy ! Component: 2550 - total flux cleaned = -0.00420338 Jy ! Component: 2600 - total flux cleaned = -0.00427757 Jy ! Component: 2650 - total flux cleaned = -0.00435136 Jy ! Component: 2700 - total flux cleaned = -0.00444918 Jy ! Component: 2750 - total flux cleaned = -0.00452231 Jy ! Component: 2800 - total flux cleaned = -0.00464375 Jy ! Component: 2850 - total flux cleaned = -0.00469215 Jy ! Component: 2900 - total flux cleaned = -0.00474036 Jy ! Component: 2950 - total flux cleaned = -0.00486086 Jy ! Component: 3000 - total flux cleaned = -0.00498105 Jy ! Component: 3050 - total flux cleaned = -0.00507724 Jy ! Component: 3100 - total flux cleaned = -0.00522145 Jy ! Component: 3150 - total flux cleaned = -0.00536579 Jy ! Component: 3200 - total flux cleaned = -0.00551033 Jy ! Component: 3250 - total flux cleaned = -0.00565505 Jy ! Component: 3300 - total flux cleaned = -0.00572762 Jy ! Component: 3350 - total flux cleaned = -0.00580061 Jy ! Component: 3400 - total flux cleaned = -0.00592232 Jy ! Component: 3450 - total flux cleaned = -0.00599568 Jy ! Component: 3500 - total flux cleaned = -0.00609403 Jy ! Component: 3550 - total flux cleaned = -0.0062175 Jy ! Component: 3600 - total flux cleaned = -0.00634166 Jy ! Component: 3650 - total flux cleaned = -0.00644136 Jy ! Component: 3700 - total flux cleaned = -0.00654168 Jy ! Component: 3750 - total flux cleaned = -0.00666751 Jy ! Component: 3800 - total flux cleaned = -0.00684523 Jy ! Component: 3850 - total flux cleaned = -0.0069729 Jy ! Component: 3900 - total flux cleaned = -0.00710168 Jy ! Component: 3950 - total flux cleaned = -0.00723171 Jy ! Component: 4000 - total flux cleaned = -0.00736322 Jy ! Component: 4050 - total flux cleaned = -0.00749606 Jy ! Total flux subtracted in 4096 components = -0.00760358 Jy ! Clean residual min=-0.001589 max=0.001810 Jy/beam ! Clean residual mean=-0.000004 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.297696 Jy keep ! Adding 207 model components to the UV plane model. ! The established model now contains 297 components and 0.297696 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0856-1105_S_j_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.494 x 6.191 at -8.791 degrees (North through East) ! Clean map min=-0.0071031 max=0.2631 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0856-1105_S_j_map.fits wmodel /image_prod/ug002_uva//J0856-1105_S_j_map.mod ! Writing 297 model components to file: /image_prod/ug002_uva//J0856-1105_S_j_map.mod wobs /image_prod/ug002_uva//J0856-1105_S_j_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0856-1105_S_j_uvs.fits wwins /image_prod/ug002_uva//J0856-1105_S_j_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0856-1105_S_j_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.263097 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000360978 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.41161 0.41161 0.823219 1.64644 3.29288 6.58575 13.1715 26.343 52.686 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.263 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 728.845 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0856-1105_S_j_dfm.log closed on Wed Mar 4 22:42:55 2020