! Started logfile: /image_prod/ug002_uva//J0854+2006_X_m_dfm.log on Wed Mar 4 22:40:17 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0854+2006_X_m_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0854+2006_X_m_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.761111 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8220 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0854+2006_X_m] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.688524Jy sigma=8.068809 ! Fit after self-cal, rms=3.625017Jy sigma=6.076358 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6652 mas, bmaj=1.733 mas, bpa=4.986 degrees ! Estimated noise=5.61868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.08277 Jy ! Component: 100 - total flux cleaned = 3.78225 Jy ! Total flux subtracted in 100 components = 3.78225 Jy ! Clean residual min=-0.215146 max=0.374665 Jy/beam ! Clean residual mean=0.000053 rms=0.060734 Jy/beam ! Combined flux in latest and established models = 3.78225 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 3.78225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.265214Jy sigma=2.588571 ! Fit after self-cal, rms=1.265098Jy sigma=2.588440 ! Inverting map ! Added new window around map position (7.6, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.37589 Jy ! Component: 100 - total flux cleaned = 0.612273 Jy ! Total flux subtracted in 100 components = 0.612273 Jy ! Clean residual min=-0.222151 max=0.333171 Jy/beam ! Clean residual mean=0.000013 rms=0.055918 Jy/beam ! Combined flux in latest and established models = 4.39453 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 4.39452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.071029Jy sigma=2.317523 ! Fit after self-cal, rms=1.067276Jy sigma=2.311183 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8276 mas, bmaj=1.993 mas, bpa=4.619 degrees ! Estimated noise=4.45536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.446478 Jy ! Component: 100 - total flux cleaned = 0.727388 Jy ! Component: 150 - total flux cleaned = 0.875288 Jy ! Component: 200 - total flux cleaned = 0.961513 Jy ! Total flux subtracted in 200 components = 0.961513 Jy ! Clean residual min=-0.180860 max=0.318548 Jy/beam ! Clean residual mean=0.000100 rms=0.046589 Jy/beam ! Combined flux in latest and established models = 5.35604 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 5.35604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.793011Jy sigma=1.917734 ! Fit after self-cal, rms=0.780559Jy sigma=1.902949 ! Inverting map ! Added new window around map position (1.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.259161 Jy ! Component: 100 - total flux cleaned = 0.313813 Jy ! Component: 150 - total flux cleaned = 0.325114 Jy ! Component: 200 - total flux cleaned = 0.320216 Jy ! Total flux subtracted in 200 components = 0.320216 Jy ! Clean residual min=-0.189756 max=0.219724 Jy/beam ! Clean residual mean=-0.000016 rms=0.038997 Jy/beam ! Combined flux in latest and established models = 5.67625 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 69 components and 5.67625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.698554Jy sigma=1.630476 ! Fit after self-cal, rms=0.695191Jy sigma=1.626348 ! Inverting map ! Added new window around map position (-7.6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121934 Jy ! Component: 100 - total flux cleaned = 0.122452 Jy ! Component: 150 - total flux cleaned = 0.113971 Jy ! Component: 200 - total flux cleaned = 0.109961 Jy ! Total flux subtracted in 200 components = 0.109961 Jy ! Clean residual min=-0.158444 max=0.151253 Jy/beam ! Clean residual mean=-0.000029 rms=0.033912 Jy/beam ! Combined flux in latest and established models = 5.78621 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 5.78621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.645598Jy sigma=1.419427 ! Fit after self-cal, rms=0.641559Jy sigma=1.414032 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8276 x 1.993 at 4.619 degrees (North through East) ! Clean map min=-0.14863 max=4.0987 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 0.98 KP 1.06 ! LA 1.05 MK 0.96 NL 1.04 OV 0.96 ! PT 0.92 SC 1.17 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 0.97 KP 1.08 ! LA 1.03 MK 0.95 NL 1.01 OV 0.95 ! PT 0.94 SC 1.18 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.97 KP 1.05 ! LA 1.05 MK 0.96 NL 1.01 OV 0.92 ! PT 0.94 SC 1.25 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.99 KP 1.06 ! LA 1.03 MK 0.95 NL 1.01 OV 0.95 ! PT 0.92 SC 1.14 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.00 KP 1.04 ! LA 1.02 MK 0.96 NL 1.02 OV 0.95 ! PT 0.93 SC 1.14 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.97 KP 1.04 ! LA 1.06 MK 1.00 NL 1.03 OV 0.92 ! PT 0.94 SC 1.18 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.99 KP 1.03 ! LA 1.05 MK 0.94 NL 1.02 OV 0.96 ! PT 0.92 SC 1.09 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.97 KP 1.06 ! LA 1.07 MK 0.96 NL 1.01 OV 0.90 ! PT 0.92 SC 1.19 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.97 KP 1.05 ! LA 1.04 MK 0.96 NL 1.02 OV 0.92 ! PT 0.93 SC 1.15 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.02 KP 1.08 ! LA 1.01 MK 0.95 NL 1.00 OV 0.95 ! PT 0.94 SC 1.18 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.98 KP 1.05 ! LA 1.04 MK 0.95 NL 1.01 OV 0.91 ! PT 0.94 SC 1.15 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.02 KP 1.03 ! LA 1.02 MK 0.97 NL 1.03 OV 0.93 ! PT 0.92 SC 1.16 ! ! ! Fit before self-cal, rms=0.641559Jy sigma=1.414032 ! Fit after self-cal, rms=0.614316Jy sigma=1.195006 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8371 mas, bmaj=2.006 mas, bpa=3.028 degrees ! Estimated noise=4.50389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0817211 Jy ! Component: 100 - total flux cleaned = -0.106003 Jy ! Component: 150 - total flux cleaned = -0.123831 Jy ! Component: 200 - total flux cleaned = -0.149739 Jy ! Total flux subtracted in 200 components = -0.149739 Jy ! Clean residual min=-0.119565 max=0.126079 Jy/beam ! Clean residual mean=-0.000051 rms=0.025496 Jy/beam ! Combined flux in latest and established models = 5.63647 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 5.63647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.563970Jy sigma=1.121053 ! Fit after self-cal, rms=0.563617Jy sigma=1.120595 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.563617Jy sigma=1.120595 ! Fit after self-cal, rms=0.367472Jy sigma=0.630498 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.827 mas, bmaj=1.971 mas, bpa=3.785 degrees ! Estimated noise=4.52691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.100894 Jy ! Component: 100 - total flux cleaned = -0.111814 Jy ! Component: 150 - total flux cleaned = -0.109247 Jy ! Component: 200 - total flux cleaned = -0.105147 Jy ! Total flux subtracted in 200 components = -0.105147 Jy ! Clean residual min=-0.063835 max=0.056856 Jy/beam ! Clean residual mean=-0.000056 rms=0.012309 Jy/beam ! Combined flux in latest and established models = 5.53133 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 5.53133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.324945Jy sigma=0.553936 ! Fit after self-cal, rms=0.323985Jy sigma=0.552628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00590943 Jy ! Component: 100 - total flux cleaned = -0.00760337 Jy ! Component: 150 - total flux cleaned = -0.00762763 Jy ! Component: 200 - total flux cleaned = -0.00763819 Jy ! Total flux subtracted in 200 components = -0.00763819 Jy ! Clean residual min=-0.059719 max=0.051939 Jy/beam ! Clean residual mean=-0.000054 rms=0.011554 Jy/beam ! Combined flux in latest and established models = 5.52369 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 129 components and 5.52369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.309088Jy sigma=0.525628 ! Fit after self-cal, rms=0.308772Jy sigma=0.525263 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.308772Jy sigma=0.525263 ! Fit after self-cal, rms=0.295926Jy sigma=0.501777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8268 mas, bmaj=1.967 mas, bpa=3.834 degrees ! Estimated noise=4.53234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.054987 Jy ! Component: 100 - total flux cleaned = -0.0639948 Jy ! Component: 150 - total flux cleaned = -0.0670608 Jy ! Component: 200 - total flux cleaned = -0.0655648 Jy ! Total flux subtracted in 200 components = -0.0655648 Jy ! Clean residual min=-0.054288 max=0.047596 Jy/beam ! Clean residual mean=-0.000044 rms=0.009997 Jy/beam ! Combined flux in latest and established models = 5.45812 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 137 components and 5.45812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.275912Jy sigma=0.465018 ! Fit after self-cal, rms=0.275619Jy sigma=0.464715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143912 Jy ! Component: 100 - total flux cleaned = -0.00137716 Jy ! Component: 150 - total flux cleaned = -0.00136216 Jy ! Component: 200 - total flux cleaned = -0.000211963 Jy ! Total flux subtracted in 200 components = -0.000211963 Jy ! Clean residual min=-0.051691 max=0.043464 Jy/beam ! Clean residual mean=-0.000044 rms=0.009512 Jy/beam ! Combined flux in latest and established models = 5.45791 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 149 components and 5.45791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.266264Jy sigma=0.447798 ! Fit after self-cal, rms=0.266094Jy sigma=0.447675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.266094Jy sigma=0.447675 ! Fit after self-cal, rms=0.259171Jy sigma=0.436547 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.92 mas, bmaj=2.692 mas, bpa=-1.587 degrees ! Estimated noise=6.52314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0291459 Jy ! Component: 100 - total flux cleaned = -0.0363334 Jy ! Component: 150 - total flux cleaned = -0.0411598 Jy ! Component: 200 - total flux cleaned = -0.0411434 Jy ! Total flux subtracted in 200 components = -0.0411434 Jy ! Clean residual min=-0.042858 max=0.043609 Jy/beam ! Clean residual mean=-0.000102 rms=0.010915 Jy/beam ! Combined flux in latest and established models = 5.41677 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 172 components and 5.41677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.248936Jy sigma=0.419205 ! Fit after self-cal, rms=0.248763Jy sigma=0.418670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000989818 Jy ! Component: 100 - total flux cleaned = -0.00102703 Jy ! Component: 150 - total flux cleaned = -0.00186582 Jy ! Component: 200 - total flux cleaned = -0.00105802 Jy ! Total flux subtracted in 200 components = -0.00105802 Jy ! Clean residual min=-0.040451 max=0.044199 Jy/beam ! Clean residual mean=-0.000104 rms=0.010459 Jy/beam ! Combined flux in latest and established models = 5.41571 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 182 components and 5.41571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.244592Jy sigma=0.412643 ! Fit after self-cal, rms=0.244481Jy sigma=0.412246 ! Inverting map ! Added new window around map position (11.4, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213525 Jy ! Component: 100 - total flux cleaned = 0.0202177 Jy ! Component: 150 - total flux cleaned = 0.0150714 Jy ! Component: 200 - total flux cleaned = 0.0143242 Jy ! Total flux subtracted in 200 components = 0.0143242 Jy ! Clean residual min=-0.037522 max=0.035618 Jy/beam ! Clean residual mean=-0.000081 rms=0.009606 Jy/beam ! Combined flux in latest and established models = 5.43003 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 204 components and 5.43003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.237331Jy sigma=0.400242 ! Fit after self-cal, rms=0.237015Jy sigma=0.399453 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8269 mas, bmaj=1.964 mas, bpa=3.867 degrees ! Estimated noise=4.53389 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8269 x 1.964 at 3.867 degrees (North through East) ! Clean map min=-0.064515 max=4.1104 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.237015Jy sigma=0.399453 ! Fit after self-cal, rms=0.213870Jy sigma=0.356128 ! Inverting map and beam ! Estimated beam: bmin=0.827 mas, bmaj=1.963 mas, bpa=3.834 degrees ! Estimated noise=4.53337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0394621 Jy ! Component: 100 - total flux cleaned = -0.0586765 Jy ! Component: 150 - total flux cleaned = -0.067139 Jy ! Component: 200 - total flux cleaned = -0.0700597 Jy ! Total flux subtracted in 200 components = -0.0700597 Jy ! Clean residual min=-0.044074 max=0.036345 Jy/beam ! Clean residual mean=-0.000019 rms=0.007172 Jy/beam ! Combined flux in latest and established models = 5.35997 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 223 components and 5.35997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.201588Jy sigma=0.332897 ! Fit after self-cal, rms=0.201491Jy sigma=0.332704 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100245 Jy ! Component: 100 - total flux cleaned = -0.00188705 Jy ! Component: 150 - total flux cleaned = -0.00191571 Jy ! Component: 200 - total flux cleaned = -0.00115525 Jy ! Total flux subtracted in 200 components = -0.00115525 Jy ! Clean residual min=-0.040728 max=0.033871 Jy/beam ! Clean residual mean=-0.000018 rms=0.006859 Jy/beam ! Combined flux in latest and established models = 5.35882 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 232 components and 5.35882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.195269Jy sigma=0.320378 ! Fit after self-cal, rms=0.195173Jy sigma=0.320237 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.195173Jy sigma=0.320237 ! Fit after self-cal, rms=0.190152Jy sigma=0.315082 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6584 mas, bmaj=1.699 mas, bpa=4.624 degrees ! Estimated noise=5.80159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.16352 Jy ! Component: 100 - total flux cleaned = 3.91346 Jy ! Component: 150 - total flux cleaned = 4.24496 Jy ! Component: 200 - total flux cleaned = 4.45379 Jy ! Total flux subtracted in 200 components = 4.45379 Jy ! Clean residual min=-0.064128 max=0.114650 Jy/beam ! Clean residual mean=0.000062 rms=0.015754 Jy/beam ! Combined flux in latest and established models = 4.45379 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 4.45379 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8275 mas, bmaj=1.961 mas, bpa=3.877 degrees ! Estimated noise=4.53146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231816 Jy ! Component: 100 - total flux cleaned = 0.384519 Jy ! Component: 150 - total flux cleaned = 0.499327 Jy ! Component: 200 - total flux cleaned = 0.589822 Jy ! Total flux subtracted in 200 components = 0.589822 Jy ! Clean residual min=-0.046190 max=0.055116 Jy/beam ! Clean residual mean=0.000057 rms=0.011112 Jy/beam ! Combined flux in latest and established models = 5.04361 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 5.04361 Jy ! Inverting map ! Added new window around map position (4.4, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0678017 Jy ! Component: 100 - total flux cleaned = 0.109772 Jy ! Component: 150 - total flux cleaned = 0.141647 Jy ! Component: 200 - total flux cleaned = 0.169903 Jy ! Total flux subtracted in 200 components = 0.169903 Jy ! Clean residual min=-0.036623 max=0.042623 Jy/beam ! Clean residual mean=0.000012 rms=0.008763 Jy/beam ! Combined flux in latest and established models = 5.21351 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 78 components and 5.21351 Jy ! Inverting map ! Added new window around map position (13, 35.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352356 Jy ! Component: 100 - total flux cleaned = 0.0553506 Jy ! Component: 150 - total flux cleaned = 0.0723631 Jy ! Component: 200 - total flux cleaned = 0.0842091 Jy ! Total flux subtracted in 200 components = 0.0842091 Jy ! Clean residual min=-0.033877 max=0.036103 Jy/beam ! Clean residual mean=-0.000002 rms=0.007699 Jy/beam ! Combined flux in latest and established models = 5.29772 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 103 components and 5.29772 Jy ! Inverting map ! Added new window around map position (4.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233621 Jy ! Component: 100 - total flux cleaned = 0.0317396 Jy ! Component: 150 - total flux cleaned = 0.0395503 Jy ! Component: 200 - total flux cleaned = 0.0458674 Jy ! Total flux subtracted in 200 components = 0.0458674 Jy ! Clean residual min=-0.031838 max=0.030672 Jy/beam ! Clean residual mean=-0.000009 rms=0.007017 Jy/beam ! Combined flux in latest and established models = 5.34359 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 123 components and 5.34359 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.929 mas, bmaj=2.692 mas, bpa=-1.867 degrees ! Estimated noise=6.49797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266905 Jy ! Component: 100 - total flux cleaned = 0.0361652 Jy ! Component: 150 - total flux cleaned = 0.0371836 Jy ! Component: 200 - total flux cleaned = 0.0397557 Jy ! Total flux subtracted in 200 components = 0.0397557 Jy ! Clean residual min=-0.031806 max=0.032524 Jy/beam ! Clean residual mean=-0.000066 rms=0.008212 Jy/beam ! Combined flux in latest and established models = 5.38335 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160435 Jy ! Component: 100 - total flux cleaned = 0.00389219 Jy ! Component: 150 - total flux cleaned = 0.00317542 Jy ! Component: 200 - total flux cleaned = 0.00384578 Jy ! Total flux subtracted in 200 components = 0.00384578 Jy ! Clean residual min=-0.029343 max=0.031151 Jy/beam ! Clean residual mean=-0.000071 rms=0.007786 Jy/beam ! Combined flux in latest and established models = 5.38719 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 164 components and 5.38719 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8275 mas, bmaj=1.961 mas, bpa=3.877 degrees ! Estimated noise=4.53146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00924788 Jy ! Component: 100 - total flux cleaned = -0.0137706 Jy ! Component: 150 - total flux cleaned = -0.0171389 Jy ! Component: 200 - total flux cleaned = -0.0187275 Jy ! Total flux subtracted in 200 components = -0.0187275 Jy ! Clean residual min=-0.026687 max=0.028671 Jy/beam ! Clean residual mean=-0.000028 rms=0.005904 Jy/beam ! Combined flux in latest and established models = 5.36847 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 187 components and 5.36846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172589Jy sigma=0.286377 ! Fit after self-cal, rms=0.169737Jy sigma=0.281183 wmodel J0854+2006_X_m_map.mod ! Writing 187 model components to file: J0854+2006_X_m_map.mod wobs J0854+2006_X_m_uvs.fits ! Writing UV FITS file: J0854+2006_X_m_uvs.fits wwins J0854+2006_X_m_map.win ! wwins: Wrote 9 windows to J0854+2006_X_m_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030677 Jy ! Component: 100 - total flux cleaned = 0.00399481 Jy ! Component: 150 - total flux cleaned = 0.00618726 Jy ! Component: 200 - total flux cleaned = 0.00787197 Jy ! Component: 250 - total flux cleaned = 0.00951102 Jy ! Component: 300 - total flux cleaned = 0.0103069 Jy ! Component: 350 - total flux cleaned = 0.0106918 Jy ! Component: 400 - total flux cleaned = 0.0118254 Jy ! Component: 450 - total flux cleaned = 0.0140343 Jy ! Component: 500 - total flux cleaned = 0.0154842 Jy ! Component: 550 - total flux cleaned = 0.0168982 Jy ! Component: 600 - total flux cleaned = 0.0182839 Jy ! Component: 650 - total flux cleaned = 0.0189674 Jy ! Component: 700 - total flux cleaned = 0.0206456 Jy ! Component: 750 - total flux cleaned = 0.021956 Jy ! Component: 800 - total flux cleaned = 0.0226011 Jy ! Component: 850 - total flux cleaned = 0.0245051 Jy ! Component: 900 - total flux cleaned = 0.0251258 Jy ! Component: 950 - total flux cleaned = 0.0257428 Jy ! Component: 1000 - total flux cleaned = 0.0275562 Jy ! Component: 1050 - total flux cleaned = 0.0302301 Jy ! Component: 1100 - total flux cleaned = 0.0313988 Jy ! Component: 1150 - total flux cleaned = 0.0334183 Jy ! Component: 1200 - total flux cleaned = 0.0351251 Jy ! Component: 1250 - total flux cleaned = 0.0365195 Jy ! Component: 1300 - total flux cleaned = 0.0373521 Jy ! Component: 1350 - total flux cleaned = 0.0392668 Jy ! Component: 1400 - total flux cleaned = 0.0406139 Jy ! Component: 1450 - total flux cleaned = 0.0424687 Jy ! Component: 1500 - total flux cleaned = 0.0427284 Jy ! Component: 1550 - total flux cleaned = 0.0445343 Jy ! Component: 1600 - total flux cleaned = 0.0447823 Jy ! Component: 1650 - total flux cleaned = 0.0455409 Jy ! Component: 1700 - total flux cleaned = 0.0465392 Jy ! Component: 1750 - total flux cleaned = 0.0477688 Jy ! Component: 1800 - total flux cleaned = 0.0484974 Jy ! Component: 1850 - total flux cleaned = 0.0496947 Jy ! Component: 1900 - total flux cleaned = 0.0504046 Jy ! Component: 1950 - total flux cleaned = 0.0508729 Jy ! Component: 2000 - total flux cleaned = 0.0517974 Jy ! Component: 2050 - total flux cleaned = 0.0524789 Jy ! Component: 2100 - total flux cleaned = 0.0529259 Jy ! Component: 2150 - total flux cleaned = 0.0542606 Jy ! Component: 2200 - total flux cleaned = 0.0544796 Jy ! Component: 2250 - total flux cleaned = 0.0553486 Jy ! Component: 2300 - total flux cleaned = 0.0559948 Jy ! Component: 2350 - total flux cleaned = 0.0566345 Jy ! Component: 2400 - total flux cleaned = 0.0568434 Jy ! Component: 2450 - total flux cleaned = 0.0574682 Jy ! Component: 2500 - total flux cleaned = 0.0572618 Jy ! Component: 2550 - total flux cleaned = 0.0574627 Jy ! Component: 2600 - total flux cleaned = 0.0570582 Jy ! Component: 2650 - total flux cleaned = 0.0572562 Jy ! Component: 2700 - total flux cleaned = 0.0580465 Jy ! Component: 2750 - total flux cleaned = 0.0586291 Jy ! Component: 2800 - total flux cleaned = 0.0586303 Jy ! Component: 2850 - total flux cleaned = 0.0582478 Jy ! Component: 2900 - total flux cleaned = 0.0590051 Jy ! Component: 2950 - total flux cleaned = 0.0595703 Jy ! Component: 3000 - total flux cleaned = 0.0595706 Jy ! Component: 3050 - total flux cleaned = 0.0601219 Jy ! Component: 3100 - total flux cleaned = 0.0604879 Jy ! Component: 3150 - total flux cleaned = 0.0604876 Jy ! Component: 3200 - total flux cleaned = 0.0610238 Jy ! Component: 3250 - total flux cleaned = 0.0610228 Jy ! Component: 3300 - total flux cleaned = 0.0618968 Jy ! Component: 3350 - total flux cleaned = 0.0618992 Jy ! Component: 3400 - total flux cleaned = 0.0625862 Jy ! Component: 3450 - total flux cleaned = 0.0632652 Jy ! Component: 3500 - total flux cleaned = 0.0634323 Jy ! Component: 3550 - total flux cleaned = 0.0640997 Jy ! Component: 3600 - total flux cleaned = 0.0637692 Jy ! Component: 3650 - total flux cleaned = 0.0647578 Jy ! Component: 3700 - total flux cleaned = 0.0649174 Jy ! Component: 3750 - total flux cleaned = 0.0650788 Jy ! Component: 3800 - total flux cleaned = 0.0653981 Jy ! Component: 3850 - total flux cleaned = 0.0655582 Jy ! Component: 3900 - total flux cleaned = 0.0655587 Jy ! Component: 3950 - total flux cleaned = 0.0666517 Jy ! Component: 4000 - total flux cleaned = 0.0671142 Jy ! Component: 4050 - total flux cleaned = 0.0677259 Jy ! Total flux subtracted in 4096 components = 0.0678788 Jy ! Clean residual min=-0.007570 max=0.007569 Jy/beam ! Clean residual mean=-0.000012 rms=0.002679 Jy/beam ! Combined flux in latest and established models = 5.43634 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 491 components and 5.43634 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0854+2006_X_m_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8275 x 1.961 at 3.877 degrees (North through East) ! Clean map min=-0.043253 max=4.1351 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0854+2006_X_m_map.fits wmodel /image_prod/ug002_uva//J0854+2006_X_m_map.mod ! Writing 491 model components to file: /image_prod/ug002_uva//J0854+2006_X_m_map.mod wobs /image_prod/ug002_uva//J0854+2006_X_m_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0854+2006_X_m_uvs.fits wwins /image_prod/ug002_uva//J0854+2006_X_m_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0854+2006_X_m_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.13506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00267805 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.194293 0.194293 0.388586 0.777172 1.55434 3.10869 6.21738 12.4348 24.8695 49.739 99.4781 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.135 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1544.06 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0854+2006_X_m_dfm.log closed on Wed Mar 4 22:40:21 2020