! Started logfile: /image_prod/ug002_uva//J0854+2006_X_c_dfm.log on Wed Mar 4 22:39:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0854+2006_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0854+2006_X_c_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.838889 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5436 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0854+2006_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=5.244736Jy sigma=8.645572 ! Fit after self-cal, rms=4.227106Jy sigma=6.820619 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6828 mas, bmaj=1.538 mas, bpa=-1.819 degrees ! Estimated noise=7.14517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.63533 Jy ! Component: 100 - total flux cleaned = 4.54771 Jy ! Total flux subtracted in 100 components = 4.54771 Jy ! Clean residual min=-0.239483 max=0.401227 Jy/beam ! Clean residual mean=-0.000021 rms=0.056516 Jy/beam ! Combined flux in latest and established models = 4.54771 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 4.54771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.295502Jy sigma=2.031161 ! Fit after self-cal, rms=1.294772Jy sigma=2.028817 ! Inverting map ! Added new window around map position (-2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.457407 Jy ! Component: 100 - total flux cleaned = 0.76398 Jy ! Total flux subtracted in 100 components = 0.76398 Jy ! Clean residual min=-0.211287 max=0.339339 Jy/beam ! Clean residual mean=-0.000030 rms=0.046701 Jy/beam ! Combined flux in latest and established models = 5.31169 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 5.31169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.006004Jy sigma=1.690978 ! Fit after self-cal, rms=0.997541Jy sigma=1.675586 ! Inverting map ! Added new window around map position (2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.319801 Jy ! Component: 100 - total flux cleaned = 0.541424 Jy ! Total flux subtracted in 100 components = 0.541424 Jy ! Clean residual min=-0.185666 max=0.200848 Jy/beam ! Clean residual mean=-0.000009 rms=0.039971 Jy/beam ! Combined flux in latest and established models = 5.85311 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 5.85311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.836491Jy sigma=1.435988 ! Fit after self-cal, rms=0.834002Jy sigma=1.432355 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8248 mas, bmaj=1.755 mas, bpa=-0.3604 degrees ! Estimated noise=5.86563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.8, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.251307 Jy ! Component: 100 - total flux cleaned = 0.388212 Jy ! Component: 150 - total flux cleaned = 0.505643 Jy ! Component: 200 - total flux cleaned = 0.593999 Jy ! Total flux subtracted in 200 components = 0.593999 Jy ! Clean residual min=-0.158896 max=0.187096 Jy/beam ! Clean residual mean=-0.000128 rms=0.036792 Jy/beam ! Combined flux in latest and established models = 6.44711 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 41 components and 6.44711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.688049Jy sigma=1.232853 ! Fit after self-cal, rms=0.684917Jy sigma=1.227105 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8248 x 1.755 at -0.3604 degrees (North through East) ! Clean map min=-0.14397 max=4.6921 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.93 KP 1.04 ! LA 0.95 MK 1.06 NL 1.21 OV 0.98 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 0.92 KP 1.04 ! LA 0.95 MK 1.07 NL 1.19 OV 0.97 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 0.93 KP 1.04 ! LA 0.98 MK 1.03 NL 1.20 OV 0.99 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 0.93 KP 1.04 ! LA 0.98 MK 1.07 NL 1.15 OV 0.99 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.95 KP 1.05 ! LA 0.97 MK 1.07 NL 1.19 OV 0.98 ! PT 0.88 SC 0.98 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.95 KP 1.05 ! LA 0.95 MK 1.08 NL 1.21 OV 0.98 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.95 KP 1.06 ! LA 0.96 MK 1.10 NL 1.22 OV 0.95 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.94 KP 1.05 ! LA 0.98 MK 1.09 NL 1.20 OV 0.98 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.96 KP 1.07 ! LA 0.97 MK 1.08 NL 1.20 OV 0.98 ! PT 0.88 SC 0.95 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.97 KP 1.04 ! LA 0.97 MK 1.12 NL 1.23 OV 0.98 ! PT 0.88 SC 0.94 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.98 KP 1.04 ! LA 0.97 MK 1.14 NL 1.21 OV 1.01 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.97 KP 1.02 ! LA 0.97 MK 1.13 NL 1.20 OV 1.03 ! PT 0.87 SC 1.01 ! ! ! Fit before self-cal, rms=0.684917Jy sigma=1.227105 ! Fit after self-cal, rms=0.432846Jy sigma=0.755381 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8352 mas, bmaj=1.744 mas, bpa=0.9283 degrees ! Estimated noise=5.88822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.139612 Jy ! Component: 100 - total flux cleaned = -0.211879 Jy ! Component: 150 - total flux cleaned = -0.23047 Jy ! Component: 200 - total flux cleaned = -0.244786 Jy ! Total flux subtracted in 200 components = -0.244786 Jy ! Clean residual min=-0.085083 max=0.089571 Jy/beam ! Clean residual mean=0.000001 rms=0.017795 Jy/beam ! Combined flux in latest and established models = 6.20232 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 63 components and 6.20232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.374008Jy sigma=0.658014 ! Fit after self-cal, rms=0.373548Jy sigma=0.657364 ! Inverting map ! Added new window around map position (-1.4, -13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419702 Jy ! Component: 100 - total flux cleaned = 0.0330659 Jy ! Component: 150 - total flux cleaned = 0.0271364 Jy ! Component: 200 - total flux cleaned = 0.0199507 Jy ! Total flux subtracted in 200 components = 0.0199507 Jy ! Clean residual min=-0.078617 max=0.078458 Jy/beam ! Clean residual mean=0.000003 rms=0.016519 Jy/beam ! Combined flux in latest and established models = 6.22227 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 6.22227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.349234Jy sigma=0.607551 ! Fit after self-cal, rms=0.347472Jy sigma=0.604140 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.347472Jy sigma=0.604140 ! Fit after self-cal, rms=0.291233Jy sigma=0.472411 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8318 mas, bmaj=1.741 mas, bpa=0.3277 degrees ! Estimated noise=5.89613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0886876 Jy ! Component: 100 - total flux cleaned = -0.129478 Jy ! Component: 150 - total flux cleaned = -0.141261 Jy ! Component: 200 - total flux cleaned = -0.144034 Jy ! Total flux subtracted in 200 components = -0.144034 Jy ! Clean residual min=-0.057234 max=0.045794 Jy/beam ! Clean residual mean=0.000005 rms=0.011373 Jy/beam ! Combined flux in latest and established models = 6.07824 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 6.07824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.254935Jy sigma=0.412594 ! Fit after self-cal, rms=0.254722Jy sigma=0.412117 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377967 Jy ! Component: 100 - total flux cleaned = -0.0041349 Jy ! Component: 150 - total flux cleaned = -0.00918919 Jy ! Component: 200 - total flux cleaned = -0.0119999 Jy ! Total flux subtracted in 200 components = -0.0119999 Jy ! Clean residual min=-0.054874 max=0.042200 Jy/beam ! Clean residual mean=0.000005 rms=0.010975 Jy/beam ! Combined flux in latest and established models = 6.06624 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 103 components and 6.06624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246670Jy sigma=0.397807 ! Fit after self-cal, rms=0.246588Jy sigma=0.397530 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246588Jy sigma=0.397530 ! Fit after self-cal, rms=0.231314Jy sigma=0.371958 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8304 mas, bmaj=1.74 mas, bpa=0.3301 degrees ! Estimated noise=5.89326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0582042 Jy ! Component: 100 - total flux cleaned = -0.0906198 Jy ! Component: 150 - total flux cleaned = -0.0974683 Jy ! Component: 200 - total flux cleaned = -0.100225 Jy ! Total flux subtracted in 200 components = -0.100225 Jy ! Clean residual min=-0.046513 max=0.035011 Jy/beam ! Clean residual mean=-0.000000 rms=0.008900 Jy/beam ! Combined flux in latest and established models = 5.96602 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 108 components and 5.96602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.211615Jy sigma=0.338672 ! Fit after self-cal, rms=0.211396Jy sigma=0.338434 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00350705 Jy ! Component: 100 - total flux cleaned = -0.00351346 Jy ! Component: 150 - total flux cleaned = -0.00562197 Jy ! Component: 200 - total flux cleaned = -0.00626247 Jy ! Total flux subtracted in 200 components = -0.00626247 Jy ! Clean residual min=-0.043789 max=0.034060 Jy/beam ! Clean residual mean=-0.000001 rms=0.008690 Jy/beam ! Combined flux in latest and established models = 5.95975 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 5.95975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.206826Jy sigma=0.330304 ! Fit after self-cal, rms=0.206764Jy sigma=0.330132 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.206764Jy sigma=0.330132 ! Fit after self-cal, rms=0.196591Jy sigma=0.314359 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.894 mas, bmaj=2.728 mas, bpa=-2.594 degrees ! Estimated noise=8.71489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0331309 Jy ! Component: 100 - total flux cleaned = -0.0464692 Jy ! Component: 150 - total flux cleaned = -0.0508884 Jy ! Component: 200 - total flux cleaned = -0.053087 Jy ! Total flux subtracted in 200 components = -0.053087 Jy ! Clean residual min=-0.048203 max=0.036890 Jy/beam ! Clean residual mean=0.000012 rms=0.010828 Jy/beam ! Combined flux in latest and established models = 5.90667 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 5.90667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.186980Jy sigma=0.304305 ! Fit after self-cal, rms=0.187166Jy sigma=0.302867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00372545 Jy ! Component: 100 - total flux cleaned = -0.00308834 Jy ! Component: 150 - total flux cleaned = -0.00362418 Jy ! Component: 200 - total flux cleaned = -0.00364474 Jy ! Total flux subtracted in 200 components = -0.00364474 Jy ! Clean residual min=-0.048300 max=0.037830 Jy/beam ! Clean residual mean=0.000012 rms=0.010775 Jy/beam ! Combined flux in latest and established models = 5.90302 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 5.90302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185562Jy sigma=0.302511 ! Fit after self-cal, rms=0.185755Jy sigma=0.302045 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8292 mas, bmaj=1.74 mas, bpa=0.3318 degrees ! Estimated noise=5.88958 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8292 x 1.74 at 0.3318 degrees (North through East) ! Clean map min=-0.035651 max=4.6759 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185755Jy sigma=0.302045 ! Fit after self-cal, rms=0.162508Jy sigma=0.261291 ! Inverting map and beam ! Estimated beam: bmin=0.8285 mas, bmaj=1.74 mas, bpa=0.3032 degrees ! Estimated noise=5.88991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0361929 Jy ! Component: 100 - total flux cleaned = -0.0530759 Jy ! Component: 150 - total flux cleaned = -0.0552993 Jy ! Component: 200 - total flux cleaned = -0.0546496 Jy ! Total flux subtracted in 200 components = -0.0546496 Jy ! Clean residual min=-0.032460 max=0.026039 Jy/beam ! Clean residual mean=0.000004 rms=0.006351 Jy/beam ! Combined flux in latest and established models = 5.84837 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 142 components and 5.84837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.152514Jy sigma=0.241142 ! Fit after self-cal, rms=0.151449Jy sigma=0.240325 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00394209 Jy ! Component: 100 - total flux cleaned = -0.00227295 Jy ! Component: 150 - total flux cleaned = -0.000674292 Jy ! Component: 200 - total flux cleaned = 0.000324038 Jy ! Total flux subtracted in 200 components = 0.000324038 Jy ! Clean residual min=-0.029915 max=0.025095 Jy/beam ! Clean residual mean=0.000003 rms=0.006154 Jy/beam ! Combined flux in latest and established models = 5.8487 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 151 components and 5.8487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148040Jy sigma=0.232959 ! Fit after self-cal, rms=0.147647Jy sigma=0.232718 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147647Jy sigma=0.232718 ! Fit after self-cal, rms=0.142077Jy sigma=0.226030 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6856 mas, bmaj=1.531 mas, bpa=-1.268 degrees ! Estimated noise=7.18353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.64621 Jy ! Component: 100 - total flux cleaned = 4.5501 Jy ! Component: 150 - total flux cleaned = 4.92859 Jy ! Component: 200 - total flux cleaned = 5.1216 Jy ! Total flux subtracted in 200 components = 5.1216 Jy ! Clean residual min=-0.061752 max=0.103889 Jy/beam ! Clean residual mean=-0.000010 rms=0.015087 Jy/beam ! Combined flux in latest and established models = 5.1216 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 5.1216 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8279 mas, bmaj=1.74 mas, bpa=0.317 degrees ! Estimated noise=5.88551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176617 Jy ! Component: 100 - total flux cleaned = 0.29621 Jy ! Component: 150 - total flux cleaned = 0.384962 Jy ! Component: 200 - total flux cleaned = 0.454625 Jy ! Total flux subtracted in 200 components = 0.454625 Jy ! Clean residual min=-0.038265 max=0.048208 Jy/beam ! Clean residual mean=-0.000024 rms=0.009217 Jy/beam ! Combined flux in latest and established models = 5.57623 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 5.57623 Jy ! Inverting map ! Added new window around map position (1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575742 Jy ! Component: 100 - total flux cleaned = 0.100168 Jy ! Component: 150 - total flux cleaned = 0.125144 Jy ! Component: 200 - total flux cleaned = 0.140268 Jy ! Total flux subtracted in 200 components = 0.140268 Jy ! Clean residual min=-0.033509 max=0.034859 Jy/beam ! Clean residual mean=-0.000010 rms=0.007087 Jy/beam ! Combined flux in latest and established models = 5.71649 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 5.71649 Jy ! Inverting map ! Added new window around map position (-22.2, -30.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222362 Jy ! Component: 100 - total flux cleaned = 0.032371 Jy ! Component: 150 - total flux cleaned = 0.0395174 Jy ! Component: 200 - total flux cleaned = 0.0460638 Jy ! Total flux subtracted in 200 components = 0.0460638 Jy ! Clean residual min=-0.029042 max=0.026995 Jy/beam ! Clean residual mean=-0.000002 rms=0.006192 Jy/beam ! Combined flux in latest and established models = 5.76256 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 63 components and 5.76256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.898 mas, bmaj=2.728 mas, bpa=-2.402 degrees ! Estimated noise=8.7127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329915 Jy ! Component: 100 - total flux cleaned = 0.0460015 Jy ! Component: 150 - total flux cleaned = 0.0492361 Jy ! Component: 200 - total flux cleaned = 0.0526705 Jy ! Total flux subtracted in 200 components = 0.0526705 Jy ! Clean residual min=-0.031460 max=0.032431 Jy/beam ! Clean residual mean=0.000008 rms=0.008330 Jy/beam ! Combined flux in latest and established models = 5.81523 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309565 Jy ! Component: 100 - total flux cleaned = 0.00549969 Jy ! Component: 150 - total flux cleaned = 0.00594945 Jy ! Component: 200 - total flux cleaned = 0.00681498 Jy ! Total flux subtracted in 200 components = 0.00681498 Jy ! Clean residual min=-0.030498 max=0.031050 Jy/beam ! Clean residual mean=0.000010 rms=0.008064 Jy/beam ! Combined flux in latest and established models = 5.82204 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 92 components and 5.82204 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8279 mas, bmaj=1.74 mas, bpa=0.317 degrees ! Estimated noise=5.88551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115526 Jy ! Component: 100 - total flux cleaned = 0.0011195 Jy ! Component: 150 - total flux cleaned = 0.00313035 Jy ! Component: 200 - total flux cleaned = 0.00310494 Jy ! Total flux subtracted in 200 components = 0.00310494 Jy ! Clean residual min=-0.025541 max=0.023983 Jy/beam ! Clean residual mean=0.000004 rms=0.005376 Jy/beam ! Combined flux in latest and established models = 5.82515 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 5.82515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135252Jy sigma=0.215148 ! Fit after self-cal, rms=0.132244Jy sigma=0.208965 wmodel J0854+2006_X_c_map.mod ! Writing 117 model components to file: J0854+2006_X_c_map.mod wobs J0854+2006_X_c_uvs.fits ! Writing UV FITS file: J0854+2006_X_c_uvs.fits wwins J0854+2006_X_c_map.win ! wwins: Wrote 8 windows to J0854+2006_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018005 Jy ! Component: 100 - total flux cleaned = 0.00430742 Jy ! Component: 150 - total flux cleaned = 0.00352109 Jy ! Component: 200 - total flux cleaned = 0.00276001 Jy ! Component: 250 - total flux cleaned = 0.00167845 Jy ! Component: 300 - total flux cleaned = -5.58982e-05 Jy ! Component: 350 - total flux cleaned = -0.00173796 Jy ! Component: 400 - total flux cleaned = -0.00271405 Jy ! Component: 450 - total flux cleaned = -0.00365755 Jy ! Component: 500 - total flux cleaned = -0.00457732 Jy ! Component: 550 - total flux cleaned = -0.00577118 Jy ! Component: 600 - total flux cleaned = -0.006351 Jy ! Component: 650 - total flux cleaned = -0.00719917 Jy ! Component: 700 - total flux cleaned = -0.00691837 Jy ! Component: 750 - total flux cleaned = -0.00718228 Jy ! Component: 800 - total flux cleaned = -0.0071763 Jy ! Component: 850 - total flux cleaned = -0.00639939 Jy ! Component: 900 - total flux cleaned = -0.00614163 Jy ! Component: 950 - total flux cleaned = -0.00515541 Jy ! Component: 1000 - total flux cleaned = -0.00491837 Jy ! Component: 1050 - total flux cleaned = -0.00444739 Jy ! Component: 1100 - total flux cleaned = -0.00352587 Jy ! Component: 1150 - total flux cleaned = -0.00239498 Jy ! Component: 1200 - total flux cleaned = -0.00239491 Jy ! Component: 1250 - total flux cleaned = -0.00107787 Jy ! Component: 1300 - total flux cleaned = -0.000651978 Jy ! Component: 1350 - total flux cleaned = -0.000227025 Jy ! Component: 1400 - total flux cleaned = -1.82066e-05 Jy ! Component: 1450 - total flux cleaned = 0.000796075 Jy ! Component: 1500 - total flux cleaned = 0.000997024 Jy ! Component: 1550 - total flux cleaned = 0.00158763 Jy ! Component: 1600 - total flux cleaned = 0.00197235 Jy ! Component: 1650 - total flux cleaned = 0.00196995 Jy ! Component: 1700 - total flux cleaned = 0.00252983 Jy ! Component: 1750 - total flux cleaned = 0.00289556 Jy ! Component: 1800 - total flux cleaned = 0.0025295 Jy ! Component: 1850 - total flux cleaned = 0.00181423 Jy ! Component: 1900 - total flux cleaned = 0.00164271 Jy ! Component: 1950 - total flux cleaned = 0.00216312 Jy ! Component: 2000 - total flux cleaned = 0.00182009 Jy ! Component: 2050 - total flux cleaned = 0.0016502 Jy ! Component: 2100 - total flux cleaned = 0.0014872 Jy ! Component: 2150 - total flux cleaned = 0.00165098 Jy ! Component: 2200 - total flux cleaned = 0.00148896 Jy ! Component: 2250 - total flux cleaned = 0.000852961 Jy ! Component: 2300 - total flux cleaned = 0.000542861 Jy ! Component: 2350 - total flux cleaned = 0.00054349 Jy ! Component: 2400 - total flux cleaned = 0.000392488 Jy ! Component: 2450 - total flux cleaned = 9.289e-05 Jy ! Component: 2500 - total flux cleaned = 0.000389603 Jy ! Component: 2550 - total flux cleaned = 0.00053472 Jy ! Component: 2600 - total flux cleaned = 0.000530983 Jy ! Component: 2650 - total flux cleaned = 0.000532144 Jy ! Component: 2700 - total flux cleaned = 0.000392343 Jy ! Component: 2750 - total flux cleaned = 0.000534153 Jy ! Component: 2800 - total flux cleaned = 0.000675201 Jy ! Component: 2850 - total flux cleaned = 0.000672964 Jy ! Component: 2900 - total flux cleaned = 0.000940012 Jy ! Component: 2950 - total flux cleaned = 0.00133605 Jy ! Component: 3000 - total flux cleaned = 0.000811807 Jy ! Component: 3050 - total flux cleaned = 0.000940887 Jy ! Component: 3100 - total flux cleaned = 0.000939612 Jy ! Component: 3150 - total flux cleaned = 0.00093814 Jy ! Component: 3200 - total flux cleaned = 0.000936991 Jy ! Component: 3250 - total flux cleaned = 0.00056972 Jy ! Component: 3300 - total flux cleaned = 8.25191e-05 Jy ! Component: 3350 - total flux cleaned = -3.8133e-05 Jy ! Component: 3400 - total flux cleaned = -0.000395535 Jy ! Component: 3450 - total flux cleaned = -0.000745812 Jy ! Component: 3500 - total flux cleaned = -0.000863779 Jy ! Component: 3550 - total flux cleaned = -0.000979568 Jy ! Component: 3600 - total flux cleaned = -0.00143532 Jy ! Component: 3650 - total flux cleaned = -0.00121122 Jy ! Component: 3700 - total flux cleaned = -0.00165427 Jy ! Component: 3750 - total flux cleaned = -0.00165608 Jy ! Component: 3800 - total flux cleaned = -0.00219902 Jy ! Component: 3850 - total flux cleaned = -0.00262783 Jy ! Component: 3900 - total flux cleaned = -0.00305012 Jy ! Component: 3950 - total flux cleaned = -0.00273397 Jy ! Component: 4000 - total flux cleaned = -0.00304695 Jy ! Component: 4050 - total flux cleaned = -0.00325267 Jy ! Total flux subtracted in 4096 components = -0.00406788 Jy ! Clean residual min=-0.005946 max=0.005796 Jy/beam ! Clean residual mean=0.000000 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 5.82108 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 452 components and 5.82108 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0854+2006_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8279 x 1.74 at 0.317 degrees (North through East) ! Clean map min=-0.019761 max=4.7368 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0854+2006_X_c_map.fits wmodel /image_prod/ug002_uva//J0854+2006_X_c_map.mod ! Writing 452 model components to file: /image_prod/ug002_uva//J0854+2006_X_c_map.mod wobs /image_prod/ug002_uva//J0854+2006_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0854+2006_X_c_uvs.fits wwins /image_prod/ug002_uva//J0854+2006_X_c_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0854+2006_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.73676 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00178516 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.113062 0.113062 0.226124 0.452249 0.904498 1.809 3.61799 7.23598 14.472 28.9439 57.8878 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0053 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.736 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2653.41 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0854+2006_X_c_dfm.log closed on Wed Mar 4 22:39:36 2020