! Started logfile: /image_prod/ug002_uva//J0853-0150_X_dfm.log on Wed Mar  4 22:37:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0853-0150_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0853-0150_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.861111 visibilities/baseline/integration-bin.
! Found source: J0853-0150
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 27900 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0853-0150_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001796Jy  sigma=9.472922
! Fit after  self-cal, rms=0.969545Jy  sigma=9.175470
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7348 mas, bmaj=3.501 mas, bpa=-16.59 degrees
! Estimated noise=0.718202 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237342 Jy
! Component: 100  -  total flux cleaned = 0.0302759 Jy
! Total flux subtracted in 100 components = 0.0302759 Jy
! Clean residual min=-0.003445 max=0.004024 Jy/beam
! Clean residual mean=0.000000 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.0302759 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0302759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057516Jy  sigma=0.508228
! Fit after  self-cal, rms=0.055903Jy  sigma=0.492355
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00543661 Jy
! Component: 100  -  total flux cleaned = 0.00744464 Jy
! Total flux subtracted in 100 components = 0.00744464 Jy
! Clean residual min=-0.003375 max=0.003858 Jy/beam
! Clean residual mean=0.000000 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0377206 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.0377206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055368Jy  sigma=0.487646
! Fit after  self-cal, rms=0.055344Jy  sigma=0.487374
! Inverting map 
! Added new window around map position (1.8, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369412 Jy
! Component: 100  -  total flux cleaned = 0.00437542 Jy
! Total flux subtracted in 100 components = 0.00437542 Jy
! Clean residual min=-0.002978 max=0.002835 Jy/beam
! Clean residual mean=-0.000000 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.042096 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.042096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055147Jy  sigma=0.485290
! Fit after  self-cal, rms=0.055056Jy  sigma=0.484629
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9712 mas, bmaj=3.586 mas, bpa=-15.68 degrees
! Estimated noise=0.453251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120186 Jy
! Component: 100  -  total flux cleaned = 0.000977249 Jy
! Component: 150  -  total flux cleaned = 0.000795716 Jy
! Component: 200  -  total flux cleaned = 0.000593806 Jy
! Total flux subtracted in 200 components = 0.000593806 Jy
! Clean residual min=-0.001944 max=0.001822 Jy/beam
! Clean residual mean=0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0426898 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 38 components and 0.0426898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054938Jy  sigma=0.483448
! Fit after  self-cal, rms=0.054867Jy  sigma=0.483136
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9712 x 3.586 at -15.68 degrees (North through East)
! Clean map  min=-0.0017165  max=0.033161 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.88     KP        1.08     
!   LA        1.04     MK        1.29     NL        1.19     OV        0.95     
!   PT        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.90     KP        1.18     
!   LA        1.01     MK        1.17     NL        1.22     OV        0.95     
!   PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.97     KP        1.22     
!   LA        0.92     MK        1.14     NL        1.13     OV        0.96     
!   PT        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.81     KP        1.17     
!   LA        0.96     MK        1.15     NL        1.18     OV        0.96     
!   PT        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.05     HN        0.95     KP        1.21     
!   LA        1.00     MK        1.09     NL        1.19     OV        0.91     
!   PT        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.87     KP        1.24     
!   LA        1.02     MK        1.03     NL        1.24     OV        0.90     
!   PT        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.74     KP        1.20     
!   LA        1.01     MK        1.11     NL        1.26     OV        0.93     
!   PT        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        0.77     KP        1.23     
!   LA        0.99     MK        0.98     NL        1.13     OV        0.89     
!   PT        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        0.75     KP        1.21     
!   LA        0.94     MK        1.00     NL        1.12     OV        0.94     
!   PT        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.73     KP        1.22     
!   LA        1.05     MK        0.94     NL        1.21     OV        0.87     
!   PT        0.90     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.99     HN        0.71     KP        1.24     
!   LA        0.93     MK        0.90     NL        1.13     OV        0.90     
!   PT        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.93     HN        0.75     KP        1.19     
!   LA        0.96     MK        0.80     NL        1.21     OV        0.87     
!   PT        0.95     
! 
! 
! Fit before self-cal, rms=0.054867Jy  sigma=0.483136
! Fit after  self-cal, rms=0.051132Jy  sigma=0.479819
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.959 mas, bmaj=3.528 mas, bpa=-15.11 degrees
! Estimated noise=0.448039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000894792 Jy
! Component: 100  -  total flux cleaned = 0.00120508 Jy
! Component: 150  -  total flux cleaned = 0.00125537 Jy
! Component: 200  -  total flux cleaned = 0.00131175 Jy
! Total flux subtracted in 200 components = 0.00131175 Jy
! Clean residual min=-0.000962 max=0.000908 Jy/beam
! Clean residual mean=-0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.0440016 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 55 components and 0.0440016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051111Jy  sigma=0.479664
! Fit after  self-cal, rms=0.051192Jy  sigma=0.478851
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051192Jy  sigma=0.478851
! Fit after  self-cal, rms=0.051452Jy  sigma=0.478031
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9456 mas, bmaj=3.526 mas, bpa=-14.99 degrees
! Estimated noise=0.447995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000707242 Jy
! Component: 100  -  total flux cleaned = 0.000852021 Jy
! Component: 150  -  total flux cleaned = 0.000853697 Jy
! Component: 200  -  total flux cleaned = 0.000868537 Jy
! Total flux subtracted in 200 components = 0.000868537 Jy
! Clean residual min=-0.000922 max=0.000839 Jy/beam
! Clean residual mean=-0.000001 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0448701 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.0448701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051435Jy  sigma=0.477904
! Fit after  self-cal, rms=0.051524Jy  sigma=0.477632
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.2455e-05 Jy
! Component: 100  -  total flux cleaned = 1.19475e-05 Jy
! Component: 150  -  total flux cleaned = -1.58986e-05 Jy
! Component: 200  -  total flux cleaned = -4.16646e-05 Jy
! Total flux subtracted in 200 components = -4.16646e-05 Jy
! Clean residual min=-0.000936 max=0.000858 Jy/beam
! Clean residual mean=-0.000001 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0448284 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.0448284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051515Jy  sigma=0.477562
! Fit after  self-cal, rms=0.051512Jy  sigma=0.477521
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051512Jy  sigma=0.477521
! Fit after  self-cal, rms=0.051810Jy  sigma=0.476935
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9361 mas, bmaj=3.53 mas, bpa=-14.97 degrees
! Estimated noise=0.446119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000466669 Jy
! Component: 100  -  total flux cleaned = 0.000555193 Jy
! Component: 150  -  total flux cleaned = 0.000596538 Jy
! Component: 200  -  total flux cleaned = 0.000597504 Jy
! Total flux subtracted in 200 components = 0.000597504 Jy
! Clean residual min=-0.000868 max=0.000818 Jy/beam
! Clean residual mean=-0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0454259 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 82 components and 0.0454259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051798Jy  sigma=0.476850
! Fit after  self-cal, rms=0.051860Jy  sigma=0.476685
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.7684e-05 Jy
! Component: 100  -  total flux cleaned = 1.39592e-05 Jy
! Component: 150  -  total flux cleaned = -9.88034e-06 Jy
! Component: 200  -  total flux cleaned = -2.01034e-05 Jy
! Total flux subtracted in 200 components = -2.01034e-05 Jy
! Clean residual min=-0.000843 max=0.000781 Jy/beam
! Clean residual mean=-0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0454058 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.0454058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051853Jy  sigma=0.476642
! Fit after  self-cal, rms=0.051857Jy  sigma=0.476629
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051857Jy  sigma=0.476629
! Fit after  self-cal, rms=0.051947Jy  sigma=0.476533
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.055 mas, bmaj=3.791 mas, bpa=-4.858 degrees
! Estimated noise=0.558078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381994 Jy
! Component: 100  -  total flux cleaned = 0.000394077 Jy
! Component: 150  -  total flux cleaned = 0.000394328 Jy
! Component: 200  -  total flux cleaned = 0.000404794 Jy
! Total flux subtracted in 200 components = 0.000404794 Jy
! Clean residual min=-0.000799 max=0.000904 Jy/beam
! Clean residual mean=-0.000001 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0458106 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 93 components and 0.0458106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051946Jy  sigma=0.476521
! Fit after  self-cal, rms=0.051994Jy  sigma=0.476486
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.84151e-06 Jy
! Component: 100  -  total flux cleaned = -1.36473e-05 Jy
! Component: 150  -  total flux cleaned = -8.39481e-06 Jy
! Component: 200  -  total flux cleaned = -8.613e-06 Jy
! Total flux subtracted in 200 components = -8.613e-06 Jy
! Clean residual min=-0.000838 max=0.000892 Jy/beam
! Clean residual mean=-0.000001 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.045802 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 100 components and 0.045802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051992Jy  sigma=0.476479
! Fit after  self-cal, rms=0.051992Jy  sigma=0.476478
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9273 mas, bmaj=3.538 mas, bpa=-14.97 degrees
! Estimated noise=0.443751 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9273 x 3.538 at -14.97 degrees (North through East)
! Clean map  min=-0.00076419  max=0.031519 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7061 mas, bmaj=3.484 mas, bpa=-15.99 degrees
! Estimated noise=0.670509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0239146 Jy
! Component: 100  -  total flux cleaned = 0.0321498 Jy
! Component: 150  -  total flux cleaned = 0.0372849 Jy
! Component: 200  -  total flux cleaned = 0.0407785 Jy
! Total flux subtracted in 200 components = 0.0407785 Jy
! Clean residual min=-0.002191 max=0.001928 Jy/beam
! Clean residual mean=-0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0407785 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0407785 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9273 mas, bmaj=3.538 mas, bpa=-14.97 degrees
! Estimated noise=0.443751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270001 Jy
! Component: 100  -  total flux cleaned = 0.00436275 Jy
! Component: 150  -  total flux cleaned = 0.00500929 Jy
! Component: 200  -  total flux cleaned = 0.00525817 Jy
! Total flux subtracted in 200 components = 0.00525817 Jy
! Clean residual min=-0.000937 max=0.000893 Jy/beam
! Clean residual mean=-0.000000 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0460367 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 33 components and 0.0460367 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.055 mas, bmaj=3.791 mas, bpa=-4.858 degrees
! Estimated noise=0.558078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.26271e-05 Jy
! Component: 100  -  total flux cleaned = -0.000205647 Jy
! Component: 150  -  total flux cleaned = -0.000237233 Jy
! Component: 200  -  total flux cleaned = -0.000263397 Jy
! Total flux subtracted in 200 components = -0.000263397 Jy
! Clean residual min=-0.000853 max=0.000949 Jy/beam
! Clean residual mean=-0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.0457733 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.09585e-05 Jy
! Component: 100  -  total flux cleaned = -2.09682e-05 Jy
! Component: 150  -  total flux cleaned = -3.55994e-05 Jy
! Component: 200  -  total flux cleaned = -3.51872e-05 Jy
! Total flux subtracted in 200 components = -3.51872e-05 Jy
! Clean residual min=-0.000856 max=0.000947 Jy/beam
! Clean residual mean=-0.000001 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0457381 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 50 components and 0.0457381 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9273 mas, bmaj=3.538 mas, bpa=-14.97 degrees
! Estimated noise=0.443751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.12972e-05 Jy
! Component: 100  -  total flux cleaned = -3.97552e-05 Jy
! Component: 150  -  total flux cleaned = -5.86201e-05 Jy
! Component: 200  -  total flux cleaned = -7.54518e-05 Jy
! Total flux subtracted in 200 components = -7.54518e-05 Jy
! Clean residual min=-0.000887 max=0.000829 Jy/beam
! Clean residual mean=-0.000001 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0456626 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.0456626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052002Jy  sigma=0.476638
! Fit after  self-cal, rms=0.051977Jy  sigma=0.476572
wmodel J0853-0150_X_map.mod
! Writing 65 model components to file: J0853-0150_X_map.mod
wobs   J0853-0150_X_uvs.fits
! Writing UV FITS file: J0853-0150_X_uvs.fits
wwins  J0853-0150_X_map.win
! wwins: Wrote 2 windows to J0853-0150_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113789 Jy
! Component: 100  -  total flux cleaned = -7.03549e-05 Jy
! Component: 150  -  total flux cleaned = -8.3904e-05 Jy
! Component: 200  -  total flux cleaned = -9.73037e-05 Jy
! Component: 250  -  total flux cleaned = -0.000136727 Jy
! Component: 300  -  total flux cleaned = -0.000162419 Jy
! Component: 350  -  total flux cleaned = -0.00016223 Jy
! Component: 400  -  total flux cleaned = -0.000137648 Jy
! Component: 450  -  total flux cleaned = -0.00014975 Jy
! Component: 500  -  total flux cleaned = -0.000173314 Jy
! Component: 550  -  total flux cleaned = -0.000138355 Jy
! Component: 600  -  total flux cleaned = -0.000126912 Jy
! Component: 650  -  total flux cleaned = -0.000115629 Jy
! Component: 700  -  total flux cleaned = -0.000115617 Jy
! Component: 750  -  total flux cleaned = -8.29536e-05 Jy
! Component: 800  -  total flux cleaned = -8.30108e-05 Jy
! Component: 850  -  total flux cleaned = -9.37042e-05 Jy
! Component: 900  -  total flux cleaned = -0.000104138 Jy
! Component: 950  -  total flux cleaned = -0.0001041 Jy
! Component: 1000  -  total flux cleaned = -0.000134751 Jy
! Component: 1050  -  total flux cleaned = -0.000185082 Jy
! Component: 1100  -  total flux cleaned = -0.000214956 Jy
! Component: 1150  -  total flux cleaned = -0.000244478 Jy
! Component: 1200  -  total flux cleaned = -0.000273489 Jy
! Component: 1250  -  total flux cleaned = -0.00031201 Jy
! Component: 1300  -  total flux cleaned = -0.000331019 Jy
! Component: 1350  -  total flux cleaned = -0.00034066 Jy
! Component: 1400  -  total flux cleaned = -0.000405837 Jy
! Component: 1450  -  total flux cleaned = -0.000415061 Jy
! Component: 1500  -  total flux cleaned = -0.000460599 Jy
! Component: 1550  -  total flux cleaned = -0.000469629 Jy
! Component: 1600  -  total flux cleaned = -0.000496282 Jy
! Component: 1650  -  total flux cleaned = -0.000514023 Jy
! Component: 1700  -  total flux cleaned = -0.000548908 Jy
! Component: 1750  -  total flux cleaned = -0.000557635 Jy
! Component: 1800  -  total flux cleaned = -0.00058336 Jy
! Component: 1850  -  total flux cleaned = -0.000600488 Jy
! Component: 1900  -  total flux cleaned = -0.000600573 Jy
! Component: 1950  -  total flux cleaned = -0.000650598 Jy
! Component: 2000  -  total flux cleaned = -0.000650499 Jy
! Component: 2050  -  total flux cleaned = -0.000658639 Jy
! Component: 2100  -  total flux cleaned = -0.000666847 Jy
! Component: 2150  -  total flux cleaned = -0.000682978 Jy
! Component: 2200  -  total flux cleaned = -0.000706762 Jy
! Component: 2250  -  total flux cleaned = -0.000730407 Jy
! Component: 2300  -  total flux cleaned = -0.000745997 Jy
! Component: 2350  -  total flux cleaned = -0.000769246 Jy
! Component: 2400  -  total flux cleaned = -0.000776916 Jy
! Component: 2450  -  total flux cleaned = -0.000784722 Jy
! Component: 2500  -  total flux cleaned = -0.000852843 Jy
! Component: 2550  -  total flux cleaned = -0.000822712 Jy
! Component: 2600  -  total flux cleaned = -0.000860025 Jy
! Component: 2650  -  total flux cleaned = -0.000889638 Jy
! Component: 2700  -  total flux cleaned = -0.000882284 Jy
! Component: 2750  -  total flux cleaned = -0.000896888 Jy
! Component: 2800  -  total flux cleaned = -0.000918585 Jy
! Component: 2850  -  total flux cleaned = -0.000932876 Jy
! Component: 2900  -  total flux cleaned = -0.00093996 Jy
! Component: 2950  -  total flux cleaned = -0.000968198 Jy
! Component: 3000  -  total flux cleaned = -0.000989132 Jy
! Component: 3050  -  total flux cleaned = -0.00100305 Jy
! Component: 3100  -  total flux cleaned = -0.000996088 Jy
! Component: 3150  -  total flux cleaned = -0.00100294 Jy
! Component: 3200  -  total flux cleaned = -0.000996113 Jy
! Component: 3250  -  total flux cleaned = -0.00100973 Jy
! Component: 3300  -  total flux cleaned = -0.00105008 Jy
! Component: 3350  -  total flux cleaned = -0.00104339 Jy
! Component: 3400  -  total flux cleaned = -0.00104344 Jy
! Component: 3450  -  total flux cleaned = -0.00106974 Jy
! Component: 3500  -  total flux cleaned = -0.00107626 Jy
! Component: 3550  -  total flux cleaned = -0.00109569 Jy
! Component: 3600  -  total flux cleaned = -0.00108278 Jy
! Component: 3650  -  total flux cleaned = -0.00110843 Jy
! Component: 3700  -  total flux cleaned = -0.00110838 Jy
! Component: 3750  -  total flux cleaned = -0.00111468 Jy
! Component: 3800  -  total flux cleaned = -0.00111469 Jy
! Component: 3850  -  total flux cleaned = -0.00110847 Jy
! Component: 3900  -  total flux cleaned = -0.00113951 Jy
! Component: 3950  -  total flux cleaned = -0.00117655 Jy
! Component: 4000  -  total flux cleaned = -0.00117652 Jy
! Component: 4050  -  total flux cleaned = -0.00118259 Jy
! Total flux subtracted in 4096 components = -0.00120691 Jy
! Clean residual min=-0.000377 max=0.000318 Jy/beam
! Clean residual mean=-0.000000 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0444557 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 376 components and 0.0444557 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0853-0150_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9273 x 3.538 at -14.97 degrees (North through East)
! Clean map  min=-0.00068286  max=0.031013 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0853-0150_X_map.fits
wmodel /image_prod/ug002_uva//J0853-0150_X_map.mod
! Writing 376 model components to file: /image_prod/ug002_uva//J0853-0150_X_map.mod
wobs   /image_prod/ug002_uva//J0853-0150_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0853-0150_X_uvs.fits
wwins  /image_prod/ug002_uva//J0853-0150_X_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0853-0150_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0310127 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000111499 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.07857 1.07857 2.15715 4.3143 8.6286 17.2572 34.5144 69.0288
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.031 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  278.144 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0853-0150_X_dfm.log closed on Wed Mar  4 22:37:51 2020