! Started logfile: /image_prod/ug002_uva//J0850-3039_S_dfm.log on Wed Mar 4 22:36:11 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0850-3039_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0850-3039_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.88287 visibilities/baseline/integration-bin. ! Found source: J0850-3039 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5721 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0850-3039_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004549Jy sigma=6.155258 ! Fit after self-cal, rms=0.927325Jy sigma=5.636022 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=13.21 mas, bpa=14.92 degrees ! Estimated noise=2.82361 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550812 Jy ! Component: 100 - total flux cleaned = 0.0773965 Jy ! Total flux subtracted in 100 components = 0.0773965 Jy ! Clean residual min=-0.008108 max=0.010558 Jy/beam ! Clean residual mean=-0.000037 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.0773965 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0773965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089649Jy sigma=0.449474 ! Fit after self-cal, rms=0.088795Jy sigma=0.444662 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.109 mas, bmaj=14.66 mas, bpa=13.73 degrees ! Estimated noise=1.60884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149756 Jy ! Component: 100 - total flux cleaned = 0.0216448 Jy ! Component: 150 - total flux cleaned = 0.0253609 Jy ! Component: 200 - total flux cleaned = 0.0275423 Jy ! Total flux subtracted in 200 components = 0.0275423 Jy ! Clean residual min=-0.003092 max=0.003740 Jy/beam ! Clean residual mean=-0.000017 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.104939 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 0.104939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086584Jy sigma=0.426012 ! Fit after self-cal, rms=0.086548Jy sigma=0.425553 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.109 x 14.66 at 13.73 degrees (North through East) ! Clean map min=-0.0029044 max=0.07423 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.97 HN 0.97 KP 1.00 ! LA 1.02 NL 1.13 OV 0.99 PT 0.99 ! SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.97 HN 0.97 KP 1.00 ! LA 1.01 NL 1.09 OV 1.00 PT 0.97 ! SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.99 HN 1.00 KP 0.96 ! LA 0.98 NL 1.06 OV 1.00 PT 0.98 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.086548Jy sigma=0.425553 ! Fit after self-cal, rms=0.086912Jy sigma=0.424187 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.056 mas, bmaj=14.68 mas, bpa=14.01 degrees ! Estimated noise=1.58563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668561 Jy ! Component: 100 - total flux cleaned = 0.000812245 Jy ! Component: 150 - total flux cleaned = 0.000937512 Jy ! Component: 200 - total flux cleaned = 0.00104907 Jy ! Total flux subtracted in 200 components = 0.00104907 Jy ! Clean residual min=-0.002691 max=0.003551 Jy/beam ! Clean residual mean=-0.000009 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.105988 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.105988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086852Jy sigma=0.423949 ! Fit after self-cal, rms=0.086920Jy sigma=0.423867 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086920Jy sigma=0.423867 ! Fit after self-cal, rms=0.086608Jy sigma=0.421995 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.028 mas, bmaj=14.75 mas, bpa=13.99 degrees ! Estimated noise=1.58616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436117 Jy ! Component: 100 - total flux cleaned = 0.000332462 Jy ! Component: 150 - total flux cleaned = 0.000271519 Jy ! Component: 200 - total flux cleaned = 0.000244141 Jy ! Total flux subtracted in 200 components = 0.000244141 Jy ! Clean residual min=-0.002471 max=0.002739 Jy/beam ! Clean residual mean=-0.000018 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.106232 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.106232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086580Jy sigma=0.421832 ! Fit after self-cal, rms=0.086580Jy sigma=0.421751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-81.5, 77). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192865 Jy ! Component: 100 - total flux cleaned = 0.00193464 Jy ! Component: 150 - total flux cleaned = 0.00188264 Jy ! Component: 200 - total flux cleaned = 0.00183772 Jy ! Total flux subtracted in 200 components = 0.00183772 Jy ! Clean residual min=-0.002252 max=0.002284 Jy/beam ! Clean residual mean=-0.000018 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.10807 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.10807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086447Jy sigma=0.421272 ! Fit after self-cal, rms=0.086433Jy sigma=0.421144 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086433Jy sigma=0.421144 ! Fit after self-cal, rms=0.086224Jy sigma=0.421070 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.01 mas, bmaj=14.77 mas, bpa=14.08 degrees ! Estimated noise=1.58164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814253 Jy ! Component: 100 - total flux cleaned = 0.000728251 Jy ! Component: 150 - total flux cleaned = 0.000614577 Jy ! Component: 200 - total flux cleaned = 0.000476509 Jy ! Total flux subtracted in 200 components = 0.000476509 Jy ! Clean residual min=-0.002201 max=0.002293 Jy/beam ! Clean residual mean=-0.000019 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.108546 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.108546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086162Jy sigma=0.420895 ! Fit after self-cal, rms=0.086156Jy sigma=0.420866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174147 Jy ! Component: 100 - total flux cleaned = 4.20554e-05 Jy ! Component: 150 - total flux cleaned = -5.02518e-05 Jy ! Component: 200 - total flux cleaned = -0.000137469 Jy ! Total flux subtracted in 200 components = -0.000137469 Jy ! Clean residual min=-0.002171 max=0.002268 Jy/beam ! Clean residual mean=-0.000019 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.108409 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.108409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086122Jy sigma=0.420763 ! Fit after self-cal, rms=0.086116Jy sigma=0.420754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086116Jy sigma=0.420754 ! Fit after self-cal, rms=0.085876Jy sigma=0.420738 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.876 mas, bmaj=24.33 mas, bpa=2.545 degrees ! Estimated noise=1.79881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103542 Jy ! Component: 100 - total flux cleaned = -0.000183699 Jy ! Component: 150 - total flux cleaned = -0.000273208 Jy ! Component: 200 - total flux cleaned = -0.000338379 Jy ! Total flux subtracted in 200 components = -0.000338379 Jy ! Clean residual min=-0.001773 max=0.001988 Jy/beam ! Clean residual mean=-0.000031 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.10807 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.10807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085861Jy sigma=0.420719 ! Fit after self-cal, rms=0.085858Jy sigma=0.420711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.7217e-05 Jy ! Component: 100 - total flux cleaned = -0.00010793 Jy ! Component: 150 - total flux cleaned = -0.000177371 Jy ! Component: 200 - total flux cleaned = -0.000228325 Jy ! Total flux subtracted in 200 components = -0.000228325 Jy ! Clean residual min=-0.001763 max=0.001970 Jy/beam ! Clean residual mean=-0.000030 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.107842 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.107842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085851Jy sigma=0.420706 ! Fit after self-cal, rms=0.085851Jy sigma=0.420703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=14.78 mas, bpa=14.08 degrees ! Estimated noise=1.5806 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.009 x 14.78 at 14.08 degrees (North through East) ! Clean map min=-0.0021972 max=0.072325 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=13.4 mas, bpa=14.82 degrees ! Estimated noise=2.7457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542021 Jy ! Component: 100 - total flux cleaned = 0.0784097 Jy ! Component: 150 - total flux cleaned = 0.090983 Jy ! Component: 200 - total flux cleaned = 0.097746 Jy ! Total flux subtracted in 200 components = 0.097746 Jy ! Clean residual min=-0.006391 max=0.006705 Jy/beam ! Clean residual mean=-0.000024 rms=0.002008 Jy/beam ! Combined flux in latest and established models = 0.097746 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.097746 Jy ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=14.78 mas, bpa=14.08 degrees ! Estimated noise=1.5806 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589278 Jy ! Component: 100 - total flux cleaned = 0.00717671 Jy ! Component: 150 - total flux cleaned = 0.00776322 Jy ! Component: 200 - total flux cleaned = 0.00803101 Jy ! Total flux subtracted in 200 components = 0.00803101 Jy ! Clean residual min=-0.002394 max=0.002401 Jy/beam ! Clean residual mean=-0.000029 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.105777 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 62 components and 0.105777 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.876 mas, bmaj=24.33 mas, bpa=2.545 degrees ! Estimated noise=1.79881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600406 Jy ! Component: 100 - total flux cleaned = 0.000520184 Jy ! Component: 150 - total flux cleaned = 0.00054762 Jy ! Component: 200 - total flux cleaned = 0.000627064 Jy ! Total flux subtracted in 200 components = 0.000627064 Jy ! Clean residual min=-0.001877 max=0.002097 Jy/beam ! Clean residual mean=-0.000038 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.106404 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68448e-05 Jy ! Component: 100 - total flux cleaned = 0.000127831 Jy ! Component: 150 - total flux cleaned = 0.000163379 Jy ! Component: 200 - total flux cleaned = 0.000179811 Jy ! Total flux subtracted in 200 components = 0.000179811 Jy ! Clean residual min=-0.001858 max=0.002087 Jy/beam ! Clean residual mean=-0.000036 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.106584 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 90 components and 0.106584 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=14.78 mas, bpa=14.08 degrees ! Estimated noise=1.5806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.02645e-05 Jy ! Component: 100 - total flux cleaned = -9.21227e-05 Jy ! Component: 150 - total flux cleaned = -0.000129972 Jy ! Component: 200 - total flux cleaned = -0.000129726 Jy ! Total flux subtracted in 200 components = -0.000129726 Jy ! Clean residual min=-0.002205 max=0.002441 Jy/beam ! Clean residual mean=-0.000022 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.106454 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.106454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085894Jy sigma=0.421011 ! Fit after self-cal, rms=0.085853Jy sigma=0.420909 wmodel J0850-3039_S_map.mod ! Writing 107 model components to file: J0850-3039_S_map.mod wobs J0850-3039_S_uvs.fits ! Writing UV FITS file: J0850-3039_S_uvs.fits wwins J0850-3039_S_map.win ! wwins: Wrote 2 windows to J0850-3039_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.55656e-05 Jy ! Component: 100 - total flux cleaned = 7.72655e-05 Jy ! Component: 150 - total flux cleaned = 8.21487e-06 Jy ! Component: 200 - total flux cleaned = -2.42365e-05 Jy ! Component: 250 - total flux cleaned = 7.72814e-06 Jy ! Component: 300 - total flux cleaned = 6.82834e-05 Jy ! Component: 350 - total flux cleaned = 0.000127058 Jy ! Component: 400 - total flux cleaned = 0.000212365 Jy ! Component: 450 - total flux cleaned = 0.000267855 Jy ! Component: 500 - total flux cleaned = 0.00042932 Jy ! Component: 550 - total flux cleaned = 0.000560723 Jy ! Component: 600 - total flux cleaned = 0.000766241 Jy ! Component: 650 - total flux cleaned = 0.000941707 Jy ! Component: 700 - total flux cleaned = 0.00111408 Jy ! Component: 750 - total flux cleaned = 0.00137865 Jy ! Component: 800 - total flux cleaned = 0.00142562 Jy ! Component: 850 - total flux cleaned = 0.0016108 Jy ! Component: 900 - total flux cleaned = 0.00174659 Jy ! Component: 950 - total flux cleaned = 0.00176828 Jy ! Component: 1000 - total flux cleaned = 0.00185561 Jy ! Component: 1050 - total flux cleaned = 0.00187684 Jy ! Component: 1100 - total flux cleaned = 0.00191913 Jy ! Component: 1150 - total flux cleaned = 0.00189806 Jy ! Component: 1200 - total flux cleaned = 0.00193888 Jy ! Component: 1250 - total flux cleaned = 0.00191875 Jy ! Component: 1300 - total flux cleaned = 0.00189901 Jy ! Component: 1350 - total flux cleaned = 0.00195813 Jy ! Component: 1400 - total flux cleaned = 0.00199668 Jy ! Component: 1450 - total flux cleaned = 0.00197759 Jy ! Component: 1500 - total flux cleaned = 0.00197765 Jy ! Component: 1550 - total flux cleaned = 0.0019775 Jy ! Component: 1600 - total flux cleaned = 0.00199576 Jy ! Component: 1650 - total flux cleaned = 0.00201361 Jy ! Component: 1700 - total flux cleaned = 0.0020134 Jy ! Component: 1750 - total flux cleaned = 0.00203099 Jy ! Component: 1800 - total flux cleaned = 0.00203058 Jy ! Component: 1850 - total flux cleaned = 0.00204757 Jy ! Component: 1900 - total flux cleaned = 0.00201337 Jy ! Component: 1950 - total flux cleaned = 0.00208095 Jy ! Component: 2000 - total flux cleaned = 0.0020977 Jy ! Component: 2050 - total flux cleaned = 0.00211403 Jy ! Component: 2100 - total flux cleaned = 0.00213042 Jy ! Component: 2150 - total flux cleaned = 0.00216258 Jy ! Component: 2200 - total flux cleaned = 0.00217851 Jy ! Component: 2250 - total flux cleaned = 0.00214697 Jy ! Component: 2300 - total flux cleaned = 0.00222497 Jy ! Component: 2350 - total flux cleaned = 0.0022093 Jy ! Component: 2400 - total flux cleaned = 0.00220939 Jy ! Component: 2450 - total flux cleaned = 0.00222463 Jy ! Component: 2500 - total flux cleaned = 0.00223955 Jy ! Component: 2550 - total flux cleaned = 0.00220967 Jy ! Component: 2600 - total flux cleaned = 0.00219484 Jy ! Component: 2650 - total flux cleaned = 0.0022532 Jy ! Component: 2700 - total flux cleaned = 0.00226775 Jy ! Component: 2750 - total flux cleaned = 0.00228219 Jy ! Component: 2800 - total flux cleaned = 0.00233942 Jy ! Component: 2850 - total flux cleaned = 0.00241041 Jy ! Component: 2900 - total flux cleaned = 0.00243846 Jy ! Component: 2950 - total flux cleaned = 0.00248047 Jy ! Component: 3000 - total flux cleaned = 0.00252218 Jy ! Component: 3050 - total flux cleaned = 0.00257734 Jy ! Component: 3100 - total flux cleaned = 0.00263219 Jy ! Component: 3150 - total flux cleaned = 0.00268677 Jy ! Component: 3200 - total flux cleaned = 0.00274103 Jy ! Component: 3250 - total flux cleaned = 0.00278138 Jy ! Component: 3300 - total flux cleaned = 0.00284828 Jy ! Component: 3350 - total flux cleaned = 0.00290148 Jy ! Component: 3400 - total flux cleaned = 0.00294124 Jy ! Component: 3450 - total flux cleaned = 0.00300706 Jy ! Component: 3500 - total flux cleaned = 0.00307265 Jy ! Component: 3550 - total flux cleaned = 0.00311172 Jy ! Component: 3600 - total flux cleaned = 0.00316354 Jy ! Component: 3650 - total flux cleaned = 0.0032409 Jy ! Component: 3700 - total flux cleaned = 0.0033436 Jy ! Component: 3750 - total flux cleaned = 0.00340744 Jy ! Component: 3800 - total flux cleaned = 0.00344566 Jy ! Component: 3850 - total flux cleaned = 0.00350924 Jy ! Component: 3900 - total flux cleaned = 0.00354729 Jy ! Component: 3950 - total flux cleaned = 0.00359785 Jy ! Component: 4000 - total flux cleaned = 0.0036607 Jy ! Component: 4050 - total flux cleaned = 0.00371092 Jy ! Total flux subtracted in 4096 components = 0.00377345 Jy ! Clean residual min=-0.000765 max=0.001063 Jy/beam ! Clean residual mean=0.000005 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.110228 Jy keep ! Adding 205 model components to the UV plane model. ! The established model now contains 312 components and 0.110228 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0850-3039_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.009 x 14.78 at 14.08 degrees (North through East) ! Clean map min=-0.001516 max=0.072423 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0850-3039_S_map.fits wmodel /image_prod/ug002_uva//J0850-3039_S_map.mod ! Writing 312 model components to file: /image_prod/ug002_uva//J0850-3039_S_map.mod wobs /image_prod/ug002_uva//J0850-3039_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0850-3039_S_uvs.fits wwins /image_prod/ug002_uva//J0850-3039_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0850-3039_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0724233 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00023221 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.961886 0.961886 1.92377 3.84754 7.69509 15.3902 30.7803 61.5607 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.072 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 311.887 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0850-3039_S_dfm.log closed on Wed Mar 4 22:36:14 2020