! Started logfile: /image_prod/ug002_uva//J0839+0319_X_dfm.log on Wed Mar 4 22:31:03 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0839+0319_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0839+0319_X_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.966667 visibilities/baseline/integration-bin. ! Found source: J0839+0319 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 18792 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0839+0319_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.024875Jy sigma=8.763865 ! Fit after self-cal, rms=0.835249Jy sigma=7.086880 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.678 mas, bmaj=1.711 mas, bpa=-0.5251 degrees ! Estimated noise=1.05987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112541 Jy ! Component: 100 - total flux cleaned = 0.162008 Jy ! Total flux subtracted in 100 components = 0.162008 Jy ! Clean residual min=-0.018050 max=0.047383 Jy/beam ! Clean residual mean=-0.000031 rms=0.004617 Jy/beam ! Combined flux in latest and established models = 0.162008 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.162008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139083Jy sigma=1.160719 ! Fit after self-cal, rms=0.137740Jy sigma=1.148332 ! Inverting map ! Added new window around map position (-2.2, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490944 Jy ! Component: 100 - total flux cleaned = 0.0787319 Jy ! Total flux subtracted in 100 components = 0.0787319 Jy ! Clean residual min=-0.015269 max=0.032614 Jy/beam ! Clean residual mean=-0.000021 rms=0.003473 Jy/beam ! Combined flux in latest and established models = 0.24074 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.24074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107629Jy sigma=0.890061 ! Fit after self-cal, rms=0.102972Jy sigma=0.851540 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306791 Jy ! Component: 100 - total flux cleaned = 0.0508489 Jy ! Total flux subtracted in 100 components = 0.0508489 Jy ! Clean residual min=-0.012093 max=0.021148 Jy/beam ! Clean residual mean=-0.000015 rms=0.002565 Jy/beam ! Combined flux in latest and established models = 0.291589 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.291589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085869Jy sigma=0.703713 ! Fit after self-cal, rms=0.084348Jy sigma=0.689710 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209038 Jy ! Component: 100 - total flux cleaned = 0.0351601 Jy ! Total flux subtracted in 100 components = 0.0351601 Jy ! Clean residual min=-0.009869 max=0.015455 Jy/beam ! Clean residual mean=-0.000011 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.326749 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.326749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074824Jy sigma=0.608019 ! Fit after self-cal, rms=0.074234Jy sigma=0.602040 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00687983 Jy ! Component: 100 - total flux cleaned = 0.0136049 Jy ! Total flux subtracted in 100 components = 0.0136049 Jy ! Clean residual min=-0.008680 max=0.012572 Jy/beam ! Clean residual mean=-0.000009 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.340354 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.340354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070053Jy sigma=0.567465 ! Fit after self-cal, rms=0.069654Jy sigma=0.563396 ! Inverting map ! Added new window around map position (-0.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081886 Jy ! Component: 100 - total flux cleaned = 0.0139955 Jy ! Total flux subtracted in 100 components = 0.0139955 Jy ! Clean residual min=-0.007912 max=0.011003 Jy/beam ! Clean residual mean=-0.000007 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.35435 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.35435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066222Jy sigma=0.535608 ! Fit after self-cal, rms=0.065969Jy sigma=0.532776 ! Inverting map ! Added new window around map position (5.2, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814591 Jy ! Component: 100 - total flux cleaned = 0.0141388 Jy ! Total flux subtracted in 100 components = 0.0141388 Jy ! Clean residual min=-0.006942 max=0.009037 Jy/beam ! Clean residual mean=-0.000007 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.368488 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.368488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063171Jy sigma=0.509592 ! Fit after self-cal, rms=0.063064Jy sigma=0.508249 ! Inverting map ! Added new window around map position (2.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608466 Jy ! Component: 100 - total flux cleaned = 0.0110019 Jy ! Total flux subtracted in 100 components = 0.0110019 Jy ! Clean residual min=-0.006010 max=0.006464 Jy/beam ! Clean residual mean=-0.000005 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.37949 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.37949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061217Jy sigma=0.493188 ! Fit after self-cal, rms=0.061175Jy sigma=0.492665 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8414 mas, bmaj=1.975 mas, bpa=-0.493 degrees ! Estimated noise=0.61392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998622 Jy ! Component: 100 - total flux cleaned = 0.0175034 Jy ! Component: 150 - total flux cleaned = 0.0235002 Jy ! Component: 200 - total flux cleaned = 0.0283957 Jy ! Total flux subtracted in 200 components = 0.0283957 Jy ! Clean residual min=-0.005447 max=0.004750 Jy/beam ! Clean residual mean=-0.000007 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.407886 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.407886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058613Jy sigma=0.472737 ! Fit after self-cal, rms=0.058520Jy sigma=0.471957 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8414 x 1.975 at -0.493 degrees (North through East) ! Clean map min=-0.0050801 max=0.12708 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.01 KP 1.03 ! LA 1.03 MK 1.03 OV 0.96 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 1.04 KP 1.03 ! LA 1.03 MK 1.02 OV 0.95 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.02 KP 1.02 ! LA 1.02 MK 1.02 OV 0.95 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.97 KP 1.03 ! LA 1.03 MK 1.05 OV 0.95 PT 0.92 ! SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.01 KP 1.02 ! LA 1.04 MK 1.04 OV 0.97 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.01 KP 1.03 ! LA 1.03 MK 1.04 OV 0.96 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.01 KP 1.02 ! LA 1.04 MK 1.05 OV 0.94 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.97 KP 1.06 ! LA 1.05 MK 1.06 OV 0.95 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.00 KP 1.02 ! LA 1.03 MK 1.05 OV 0.93 PT 0.94 ! SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.02 KP 1.03 ! LA 1.03 MK 1.06 OV 0.96 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.00 KP 1.04 ! LA 1.02 MK 1.05 OV 0.96 PT 0.93 ! SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.05 KP 1.05 ! LA 1.03 MK 1.06 OV 0.96 PT 0.91 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.058520Jy sigma=0.471957 ! Fit after self-cal, rms=0.056873Jy sigma=0.457411 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=1.98 mas, bpa=-0.02255 degrees ! Estimated noise=0.613941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129071 Jy ! Component: 100 - total flux cleaned = 0.00297569 Jy ! Component: 150 - total flux cleaned = 0.00429184 Jy ! Component: 200 - total flux cleaned = 0.00556358 Jy ! Total flux subtracted in 200 components = 0.00556358 Jy ! Clean residual min=-0.003224 max=0.003328 Jy/beam ! Clean residual mean=-0.000002 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.41345 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.41345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056235Jy sigma=0.452255 ! Fit after self-cal, rms=0.056156Jy sigma=0.451746 ! Inverting map ! Added new window around map position (17.8, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848237 Jy ! Component: 100 - total flux cleaned = 0.00141602 Jy ! Component: 150 - total flux cleaned = 0.00172503 Jy ! Component: 200 - total flux cleaned = 0.00210193 Jy ! Total flux subtracted in 200 components = 0.00210193 Jy ! Clean residual min=-0.003189 max=0.002949 Jy/beam ! Clean residual mean=-0.000001 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.415552 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 0.415552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055717Jy sigma=0.448628 ! Fit after self-cal, rms=0.055697Jy sigma=0.448472 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055697Jy sigma=0.448472 ! Fit after self-cal, rms=0.054534Jy sigma=0.445915 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.845 mas, bmaj=1.968 mas, bpa=0.4006 degrees ! Estimated noise=0.60649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287749 Jy ! Component: 100 - total flux cleaned = 0.000736399 Jy ! Component: 150 - total flux cleaned = 0.000896496 Jy ! Component: 200 - total flux cleaned = 0.000973959 Jy ! Total flux subtracted in 200 components = 0.000973959 Jy ! Clean residual min=-0.002843 max=0.002348 Jy/beam ! Clean residual mean=-0.000001 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.416526 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.416526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054272Jy sigma=0.443784 ! Fit after self-cal, rms=0.054257Jy sigma=0.443666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.42945e-05 Jy ! Component: 100 - total flux cleaned = 0.00012825 Jy ! Component: 150 - total flux cleaned = 0.000129333 Jy ! Component: 200 - total flux cleaned = 0.000256627 Jy ! Total flux subtracted in 200 components = 0.000256627 Jy ! Clean residual min=-0.002725 max=0.002144 Jy/beam ! Clean residual mean=-0.000000 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.416782 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 119 components and 0.416782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054091Jy sigma=0.442295 ! Fit after self-cal, rms=0.054076Jy sigma=0.442208 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054076Jy sigma=0.442208 ! Fit after self-cal, rms=0.053676Jy sigma=0.442082 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8429 mas, bmaj=1.964 mas, bpa=0.6483 degrees ! Estimated noise=0.602998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001218 Jy ! Component: 100 - total flux cleaned = 0.000124092 Jy ! Component: 150 - total flux cleaned = 6.38366e-05 Jy ! Component: 200 - total flux cleaned = 6.35165e-05 Jy ! Total flux subtracted in 200 components = 6.35165e-05 Jy ! Clean residual min=-0.002518 max=0.001841 Jy/beam ! Clean residual mean=-0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.416846 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.416846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053541Jy sigma=0.440941 ! Fit after self-cal, rms=0.053530Jy sigma=0.440869 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.62508e-05 Jy ! Component: 100 - total flux cleaned = 0.000158651 Jy ! Component: 150 - total flux cleaned = 0.000259224 Jy ! Component: 200 - total flux cleaned = 0.000305558 Jy ! Total flux subtracted in 200 components = 0.000305558 Jy ! Clean residual min=-0.002408 max=0.001724 Jy/beam ! Clean residual mean=-0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.417151 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 0.417151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053435Jy sigma=0.440040 ! Fit after self-cal, rms=0.053425Jy sigma=0.439981 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053425Jy sigma=0.439981 ! Fit after self-cal, rms=0.053156Jy sigma=0.439929 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.269 mas, bmaj=3.172 mas, bpa=9.609 degrees ! Estimated noise=0.796453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126574 Jy ! Component: 100 - total flux cleaned = 0.0015693 Jy ! Component: 150 - total flux cleaned = 0.00168279 Jy ! Component: 200 - total flux cleaned = 0.0017081 Jy ! Total flux subtracted in 200 components = 0.0017081 Jy ! Clean residual min=-0.001401 max=0.001424 Jy/beam ! Clean residual mean=0.000000 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.418859 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 145 components and 0.418859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053124Jy sigma=0.439688 ! Fit after self-cal, rms=0.053118Jy sigma=0.439646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147272 Jy ! Component: 100 - total flux cleaned = 0.000173046 Jy ! Component: 150 - total flux cleaned = 0.000172947 Jy ! Component: 200 - total flux cleaned = 0.000135912 Jy ! Total flux subtracted in 200 components = 0.000135912 Jy ! Clean residual min=-0.001349 max=0.001366 Jy/beam ! Clean residual mean=0.000000 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.418995 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 152 components and 0.418995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053102Jy sigma=0.439517 ! Fit after self-cal, rms=0.053098Jy sigma=0.439495 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8415 mas, bmaj=1.961 mas, bpa=0.8193 degrees ! Estimated noise=0.60054 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8415 x 1.961 at 0.8193 degrees (North through East) ! Clean map min=-0.0019484 max=0.12355 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.678 mas, bmaj=1.697 mas, bpa=0.7397 degrees ! Estimated noise=1.03642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121066 Jy ! Component: 100 - total flux cleaned = 0.186968 Jy ! Component: 150 - total flux cleaned = 0.227458 Jy ! Component: 200 - total flux cleaned = 0.256079 Jy ! Total flux subtracted in 200 components = 0.256079 Jy ! Clean residual min=-0.008929 max=0.016476 Jy/beam ! Clean residual mean=-0.000017 rms=0.002309 Jy/beam ! Combined flux in latest and established models = 0.256079 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.256079 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8415 mas, bmaj=1.961 mas, bpa=0.8193 degrees ! Estimated noise=0.60054 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412498 Jy ! Component: 100 - total flux cleaned = 0.0680361 Jy ! Component: 150 - total flux cleaned = 0.0868131 Jy ! Component: 200 - total flux cleaned = 0.100892 Jy ! Total flux subtracted in 200 components = 0.100892 Jy ! Clean residual min=-0.005064 max=0.008165 Jy/beam ! Clean residual mean=-0.000017 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.356971 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 63 components and 0.356971 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01087 Jy ! Component: 100 - total flux cleaned = 0.0195346 Jy ! Component: 150 - total flux cleaned = 0.0265565 Jy ! Component: 200 - total flux cleaned = 0.0323312 Jy ! Total flux subtracted in 200 components = 0.0323312 Jy ! Clean residual min=-0.003227 max=0.003865 Jy/beam ! Clean residual mean=-0.000008 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.389302 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 90 components and 0.389302 Jy ! Inverting map ! Added new window around map position (4.2, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486669 Jy ! Component: 100 - total flux cleaned = 0.00890122 Jy ! Component: 150 - total flux cleaned = 0.0122954 Jy ! Component: 200 - total flux cleaned = 0.0150702 Jy ! Total flux subtracted in 200 components = 0.0150702 Jy ! Clean residual min=-0.002442 max=0.002460 Jy/beam ! Clean residual mean=-0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.404372 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 117 components and 0.404372 Jy ! Inverting map ! Added new window around map position (-7.4, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233645 Jy ! Component: 100 - total flux cleaned = 0.00397688 Jy ! Component: 150 - total flux cleaned = 0.00519849 Jy ! Component: 200 - total flux cleaned = 0.0063746 Jy ! Total flux subtracted in 200 components = 0.0063746 Jy ! Clean residual min=-0.002082 max=0.001702 Jy/beam ! Clean residual mean=-0.000002 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.410747 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 139 components and 0.410747 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.269 mas, bmaj=3.172 mas, bpa=9.609 degrees ! Estimated noise=0.796453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306716 Jy ! Component: 100 - total flux cleaned = 0.00515848 Jy ! Component: 150 - total flux cleaned = 0.00642823 Jy ! Component: 200 - total flux cleaned = 0.00697874 Jy ! Total flux subtracted in 200 components = 0.00697874 Jy ! Clean residual min=-0.001457 max=0.001265 Jy/beam ! Clean residual mean=-0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.417726 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476556 Jy ! Component: 100 - total flux cleaned = 0.000690259 Jy ! Component: 150 - total flux cleaned = 0.000851662 Jy ! Component: 200 - total flux cleaned = 0.000997607 Jy ! Total flux subtracted in 200 components = 0.000997607 Jy ! Clean residual min=-0.001287 max=0.001216 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.418723 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 198 components and 0.418723 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8415 mas, bmaj=1.961 mas, bpa=0.8193 degrees ! Estimated noise=0.60054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.634e-05 Jy ! Component: 100 - total flux cleaned = -0.000107746 Jy ! Component: 150 - total flux cleaned = -0.000148734 Jy ! Component: 200 - total flux cleaned = -7.21393e-05 Jy ! Total flux subtracted in 200 components = -7.21393e-05 Jy ! Clean residual min=-0.001694 max=0.001404 Jy/beam ! Clean residual mean=-0.000000 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.418651 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 219 components and 0.418651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052826Jy sigma=0.437276 ! Fit after self-cal, rms=0.052712Jy sigma=0.436212 wmodel J0839+0319_X_map.mod ! Writing 219 model components to file: J0839+0319_X_map.mod wobs J0839+0319_X_uvs.fits ! Writing UV FITS file: J0839+0319_X_uvs.fits wwins J0839+0319_X_map.win ! wwins: Wrote 9 windows to J0839+0319_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370239 Jy ! Component: 100 - total flux cleaned = -0.000538695 Jy ! Component: 150 - total flux cleaned = -0.000628071 Jy ! Component: 200 - total flux cleaned = -0.000758517 Jy ! Component: 250 - total flux cleaned = -0.000948535 Jy ! Component: 300 - total flux cleaned = -0.00115327 Jy ! Component: 350 - total flux cleaned = -0.00125309 Jy ! Component: 400 - total flux cleaned = -0.00133079 Jy ! Component: 450 - total flux cleaned = -0.00136872 Jy ! Component: 500 - total flux cleaned = -0.00138752 Jy ! Component: 550 - total flux cleaned = -0.00144261 Jy ! Component: 600 - total flux cleaned = -0.00149686 Jy ! Component: 650 - total flux cleaned = -0.00158523 Jy ! Component: 700 - total flux cleaned = -0.00161985 Jy ! Component: 750 - total flux cleaned = -0.00167148 Jy ! Component: 800 - total flux cleaned = -0.00173881 Jy ! Component: 850 - total flux cleaned = -0.00175532 Jy ! Component: 900 - total flux cleaned = -0.00183725 Jy ! Component: 950 - total flux cleaned = -0.00185326 Jy ! Component: 1000 - total flux cleaned = -0.00191731 Jy ! Component: 1050 - total flux cleaned = -0.00198054 Jy ! Component: 1100 - total flux cleaned = -0.00204279 Jy ! Component: 1150 - total flux cleaned = -0.00211947 Jy ! Component: 1200 - total flux cleaned = -0.00216506 Jy ! Component: 1250 - total flux cleaned = -0.00222529 Jy ! Component: 1300 - total flux cleaned = -0.00228455 Jy ! Component: 1350 - total flux cleaned = -0.00234322 Jy ! Component: 1400 - total flux cleaned = -0.00238671 Jy ! Component: 1450 - total flux cleaned = -0.00238675 Jy ! Component: 1500 - total flux cleaned = -0.00242925 Jy ! Component: 1550 - total flux cleaned = -0.00242903 Jy ! Component: 1600 - total flux cleaned = -0.00244311 Jy ! Component: 1650 - total flux cleaned = -0.00245672 Jy ! Component: 1700 - total flux cleaned = -0.00245665 Jy ! Component: 1750 - total flux cleaned = -0.00240248 Jy ! Component: 1800 - total flux cleaned = -0.00246981 Jy ! Component: 1850 - total flux cleaned = -0.00242992 Jy ! Component: 1900 - total flux cleaned = -0.0024168 Jy ! Component: 1950 - total flux cleaned = -0.00242999 Jy ! Component: 2000 - total flux cleaned = -0.00240419 Jy ! Component: 2050 - total flux cleaned = -0.00241699 Jy ! Component: 2100 - total flux cleaned = -0.00241687 Jy ! Component: 2150 - total flux cleaned = -0.00242941 Jy ! Component: 2200 - total flux cleaned = -0.00245442 Jy ! Component: 2250 - total flux cleaned = -0.00244176 Jy ! Component: 2300 - total flux cleaned = -0.00240474 Jy ! Component: 2350 - total flux cleaned = -0.00240478 Jy ! Component: 2400 - total flux cleaned = -0.00240476 Jy ! Component: 2450 - total flux cleaned = -0.00238067 Jy ! Component: 2500 - total flux cleaned = -0.00240442 Jy ! Component: 2550 - total flux cleaned = -0.0024163 Jy ! Component: 2600 - total flux cleaned = -0.00243968 Jy ! Component: 2650 - total flux cleaned = -0.00242801 Jy ! Component: 2700 - total flux cleaned = -0.00242804 Jy ! Component: 2750 - total flux cleaned = -0.00246219 Jy ! Component: 2800 - total flux cleaned = -0.00243944 Jy ! Component: 2850 - total flux cleaned = -0.00247324 Jy ! Component: 2900 - total flux cleaned = -0.00248439 Jy ! Component: 2950 - total flux cleaned = -0.00250647 Jy ! Component: 3000 - total flux cleaned = -0.00255069 Jy ! Component: 3050 - total flux cleaned = -0.00257256 Jy ! Component: 3100 - total flux cleaned = -0.00259424 Jy ! Component: 3150 - total flux cleaned = -0.00264822 Jy ! Component: 3200 - total flux cleaned = -0.00268039 Jy ! Component: 3250 - total flux cleaned = -0.00265904 Jy ! Component: 3300 - total flux cleaned = -0.0026696 Jy ! Component: 3350 - total flux cleaned = -0.00269068 Jy ! Component: 3400 - total flux cleaned = -0.00271157 Jy ! Component: 3450 - total flux cleaned = -0.00273227 Jy ! Component: 3500 - total flux cleaned = -0.0027322 Jy ! Component: 3550 - total flux cleaned = -0.00276285 Jy ! Component: 3600 - total flux cleaned = -0.00276284 Jy ! Component: 3650 - total flux cleaned = -0.00279325 Jy ! Component: 3700 - total flux cleaned = -0.00281336 Jy ! Component: 3750 - total flux cleaned = -0.00279333 Jy ! Component: 3800 - total flux cleaned = -0.00286291 Jy ! Component: 3850 - total flux cleaned = -0.00283328 Jy ! Component: 3900 - total flux cleaned = -0.00289221 Jy ! Component: 3950 - total flux cleaned = -0.00287266 Jy ! Component: 4000 - total flux cleaned = -0.00286293 Jy ! Component: 4050 - total flux cleaned = -0.00289197 Jy ! Total flux subtracted in 4096 components = -0.00287277 Jy ! Clean residual min=-0.000522 max=0.000576 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.415778 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 513 components and 0.415778 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0839+0319_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8415 x 1.961 at 0.8193 degrees (North through East) ! Clean map min=-0.0010693 max=0.12649 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0839+0319_X_map.fits wmodel /image_prod/ug002_uva//J0839+0319_X_map.mod ! Writing 513 model components to file: /image_prod/ug002_uva//J0839+0319_X_map.mod wobs /image_prod/ug002_uva//J0839+0319_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0839+0319_X_uvs.fits wwins /image_prod/ug002_uva//J0839+0319_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0839+0319_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.126485 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164499 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.390161 0.390161 0.780322 1.56064 3.12129 6.24258 12.4852 24.9703 49.9406 99.8812 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.126 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 768.913 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0839+0319_X_dfm.log closed on Wed Mar 4 22:31:09 2020