! Started logfile: /image_prod/ug002_uva//J0836-2016_X_e_dfm.log on Wed Mar 4 22:29:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0836-2016_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0836-2016_X_e_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.87076 visibilities/baseline/integration-bin. ! Found source: J0836-2016 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 17868 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0836-2016_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.500240Jy sigma=7.400560 ! Fit after self-cal, rms=0.330103Jy sigma=1.591613 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6276 mas, bmaj=1.568 mas, bpa=-2.094 degrees ! Estimated noise=1.5684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.718225 Jy ! Component: 100 - total flux cleaned = 0.937234 Jy ! Total flux subtracted in 100 components = 0.937234 Jy ! Clean residual min=-0.040762 max=0.091760 Jy/beam ! Clean residual mean=0.000047 rms=0.008512 Jy/beam ! Combined flux in latest and established models = 0.937234 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.937234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.323496Jy sigma=1.505954 ! Fit after self-cal, rms=0.323455Jy sigma=1.505834 ! Inverting map ! Added new window around map position (-1.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111804 Jy ! Component: 100 - total flux cleaned = 0.192106 Jy ! Total flux subtracted in 100 components = 0.192106 Jy ! Clean residual min=-0.032749 max=0.081925 Jy/beam ! Clean residual mean=0.000025 rms=0.006672 Jy/beam ! Combined flux in latest and established models = 1.12934 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 1.12934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.237510Jy sigma=1.125942 ! Fit after self-cal, rms=0.236083Jy sigma=1.117173 ! Inverting map ! Added new window around map position (1.6, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0739234 Jy ! Component: 100 - total flux cleaned = 0.127939 Jy ! Total flux subtracted in 100 components = 0.127939 Jy ! Clean residual min=-0.031952 max=0.045770 Jy/beam ! Clean residual mean=0.000013 rms=0.005551 Jy/beam ! Combined flux in latest and established models = 1.25728 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 1.25728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189840Jy sigma=0.914467 ! Fit after self-cal, rms=0.189429Jy sigma=0.912997 ! Inverting map ! Added new window around map position (2.4, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468611 Jy ! Component: 100 - total flux cleaned = 0.0822207 Jy ! Total flux subtracted in 100 components = 0.0822207 Jy ! Clean residual min=-0.026549 max=0.041942 Jy/beam ! Clean residual mean=0.000006 rms=0.005048 Jy/beam ! Combined flux in latest and established models = 1.3395 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 1.3395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167289Jy sigma=0.817354 ! Fit after self-cal, rms=0.166545Jy sigma=0.814732 ! Inverting map ! Added new window around map position (-2.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038089 Jy ! Component: 100 - total flux cleaned = 0.0664443 Jy ! Total flux subtracted in 100 components = 0.0664443 Jy ! Clean residual min=-0.024655 max=0.032439 Jy/beam ! Clean residual mean=0.000001 rms=0.004676 Jy/beam ! Combined flux in latest and established models = 1.40594 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 1.40594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151108Jy sigma=0.748990 ! Fit after self-cal, rms=0.151043Jy sigma=0.748473 ! Inverting map ! Added new window around map position (1.2, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317457 Jy ! Component: 100 - total flux cleaned = 0.054118 Jy ! Total flux subtracted in 100 components = 0.054118 Jy ! Clean residual min=-0.022903 max=0.027769 Jy/beam ! Clean residual mean=-0.000003 rms=0.004381 Jy/beam ! Combined flux in latest and established models = 1.46006 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 1.46006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142400Jy sigma=0.708303 ! Fit after self-cal, rms=0.142055Jy sigma=0.706698 ! Inverting map ! Added new window around map position (-2.4, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245369 Jy ! Component: 100 - total flux cleaned = 0.0400356 Jy ! Total flux subtracted in 100 components = 0.0400356 Jy ! Clean residual min=-0.022741 max=0.022750 Jy/beam ! Clean residual mean=-0.000005 rms=0.004186 Jy/beam ! Combined flux in latest and established models = 1.5001 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 1.5001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137842Jy sigma=0.686730 ! Fit after self-cal, rms=0.137767Jy sigma=0.686058 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.773 mas, bmaj=1.903 mas, bpa=-2.53 degrees ! Estimated noise=1.08609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187177 Jy ! Component: 100 - total flux cleaned = 0.0309095 Jy ! Component: 150 - total flux cleaned = 0.0347712 Jy ! Component: 200 - total flux cleaned = 0.0368006 Jy ! Total flux subtracted in 200 components = 0.0368006 Jy ! Clean residual min=-0.020757 max=0.021995 Jy/beam ! Clean residual mean=-0.000041 rms=0.004167 Jy/beam ! Combined flux in latest and established models = 1.5369 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 1.5369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134175Jy sigma=0.671373 ! Fit after self-cal, rms=0.134135Jy sigma=0.670968 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.773 x 1.903 at -2.53 degrees (North through East) ! Clean map min=-0.019496 max=0.95024 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.96 KP 1.08 ! LA 0.97 MK 1.01 NL 1.07 OV 0.99 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.98 KP 1.07 ! LA 0.98 MK 1.03 NL 1.09 OV 0.99 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.98 KP 1.06 ! LA 0.99 MK 0.99 NL 1.09 OV 1.00 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.94 KP 1.05 ! LA 0.99 MK 1.01 NL 1.07 OV 1.01 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 1.06 ! LA 1.00 MK 1.00 NL 1.08 OV 1.01 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.97 KP 1.07 ! LA 0.99 MK 1.03 NL 1.10 OV 0.99 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.07 ! LA 0.99 MK 1.05 NL 1.09 OV 1.00 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.99 KP 1.06 ! LA 0.99 MK 1.03 NL 1.08 OV 1.00 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.01 KP 1.07 ! LA 0.99 MK 1.02 NL 1.07 OV 1.00 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.02 KP 1.06 ! LA 0.99 MK 1.03 NL 1.10 OV 1.01 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.01 KP 1.09 ! LA 1.01 MK 1.05 NL 1.11 OV 1.04 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.03 KP 1.04 ! LA 1.00 MK 1.04 NL 1.09 OV 1.03 ! PT 0.91 SC 1.02 ! ! ! Fit before self-cal, rms=0.134135Jy sigma=0.670968 ! Fit after self-cal, rms=0.116451Jy sigma=0.580934 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7757 mas, bmaj=1.905 mas, bpa=-2.183 degrees ! Estimated noise=1.09678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.015422 Jy ! Component: 100 - total flux cleaned = -0.0204773 Jy ! Component: 150 - total flux cleaned = -0.0251546 Jy ! Component: 200 - total flux cleaned = -0.0298475 Jy ! Total flux subtracted in 200 components = -0.0298475 Jy ! Clean residual min=-0.021636 max=0.015154 Jy/beam ! Clean residual mean=0.000004 rms=0.003006 Jy/beam ! Combined flux in latest and established models = 1.50705 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 1.50705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112779Jy sigma=0.561591 ! Fit after self-cal, rms=0.112726Jy sigma=0.561324 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112726Jy sigma=0.561324 ! Fit after self-cal, rms=0.103010Jy sigma=0.498596 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7762 mas, bmaj=1.92 mas, bpa=-2.152 degrees ! Estimated noise=1.09994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0140908 Jy ! Component: 100 - total flux cleaned = -0.0194216 Jy ! Component: 150 - total flux cleaned = -0.0222439 Jy ! Component: 200 - total flux cleaned = -0.0238964 Jy ! Total flux subtracted in 200 components = -0.0238964 Jy ! Clean residual min=-0.018689 max=0.012096 Jy/beam ! Clean residual mean=0.000004 rms=0.002432 Jy/beam ! Combined flux in latest and established models = 1.48315 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 1.48316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100572Jy sigma=0.484571 ! Fit after self-cal, rms=0.100559Jy sigma=0.484458 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188319 Jy ! Component: 100 - total flux cleaned = -0.00280124 Jy ! Component: 150 - total flux cleaned = -0.00365287 Jy ! Component: 200 - total flux cleaned = -0.00425271 Jy ! Total flux subtracted in 200 components = -0.00425271 Jy ! Clean residual min=-0.017729 max=0.011994 Jy/beam ! Clean residual mean=0.000003 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 1.4789 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 127 components and 1.4789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099768Jy sigma=0.479954 ! Fit after self-cal, rms=0.099761Jy sigma=0.479889 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099761Jy sigma=0.479889 ! Fit after self-cal, rms=0.090094Jy sigma=0.426253 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7758 mas, bmaj=1.929 mas, bpa=-2.198 degrees ! Estimated noise=1.10298 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0130833 Jy ! Component: 100 - total flux cleaned = -0.0172327 Jy ! Component: 150 - total flux cleaned = -0.0188929 Jy ! Component: 200 - total flux cleaned = -0.019134 Jy ! Total flux subtracted in 200 components = -0.019134 Jy ! Clean residual min=-0.015119 max=0.008754 Jy/beam ! Clean residual mean=0.000008 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 1.45977 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 1.45977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087738Jy sigma=0.413299 ! Fit after self-cal, rms=0.087723Jy sigma=0.413218 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000732905 Jy ! Component: 100 - total flux cleaned = -0.0011496 Jy ! Component: 150 - total flux cleaned = -0.00153232 Jy ! Component: 200 - total flux cleaned = -0.00171274 Jy ! Total flux subtracted in 200 components = -0.00171274 Jy ! Clean residual min=-0.014394 max=0.008323 Jy/beam ! Clean residual mean=0.000008 rms=0.001824 Jy/beam ! Combined flux in latest and established models = 1.45806 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 137 components and 1.45806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086997Jy sigma=0.409255 ! Fit after self-cal, rms=0.086990Jy sigma=0.409237 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086990Jy sigma=0.409237 ! Fit after self-cal, rms=0.086131Jy sigma=0.404322 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.083 mas, bmaj=4.354 mas, bpa=2.751 degrees ! Estimated noise=1.58238 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112355 Jy ! Component: 100 - total flux cleaned = -0.0172029 Jy ! Component: 150 - total flux cleaned = -0.0182293 Jy ! Component: 200 - total flux cleaned = -0.0185179 Jy ! Total flux subtracted in 200 components = -0.0185179 Jy ! Clean residual min=-0.018684 max=0.011350 Jy/beam ! Clean residual mean=0.000012 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 1.43954 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 147 components and 1.43954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085368Jy sigma=0.401097 ! Fit after self-cal, rms=0.085285Jy sigma=0.400703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000733835 Jy ! Component: 100 - total flux cleaned = -0.000856069 Jy ! Component: 150 - total flux cleaned = -0.00107778 Jy ! Component: 200 - total flux cleaned = -0.00127477 Jy ! Total flux subtracted in 200 components = -0.00127477 Jy ! Clean residual min=-0.018282 max=0.011540 Jy/beam ! Clean residual mean=0.000011 rms=0.002787 Jy/beam ! Combined flux in latest and established models = 1.43826 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 153 components and 1.43826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085189Jy sigma=0.400510 ! Fit after self-cal, rms=0.085168Jy sigma=0.400382 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7753 mas, bmaj=1.93 mas, bpa=-2.103 degrees ! Estimated noise=1.10362 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7753 x 1.93 at -2.103 degrees (North through East) ! Clean map min=-0.011479 max=0.97623 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085168Jy sigma=0.400382 ! Fit after self-cal, rms=0.081403Jy sigma=0.375821 ! Inverting map and beam ! Estimated beam: bmin=0.7758 mas, bmaj=1.931 mas, bpa=-2.103 degrees ! Estimated noise=1.10425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00954866 Jy ! Component: 100 - total flux cleaned = -0.0116368 Jy ! Component: 150 - total flux cleaned = -0.012249 Jy ! Component: 200 - total flux cleaned = -0.0128115 Jy ! Total flux subtracted in 200 components = -0.0128115 Jy ! Clean residual min=-0.011222 max=0.007882 Jy/beam ! Clean residual mean=0.000004 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 1.42545 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 156 components and 1.42545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080005Jy sigma=0.367640 ! Fit after self-cal, rms=0.079990Jy sigma=0.367576 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000537796 Jy ! Component: 100 - total flux cleaned = -0.00100116 Jy ! Component: 150 - total flux cleaned = -0.00114829 Jy ! Component: 200 - total flux cleaned = -0.00128436 Jy ! Total flux subtracted in 200 components = -0.00128436 Jy ! Clean residual min=-0.011110 max=0.007547 Jy/beam ! Clean residual mean=0.000004 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 1.42417 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 160 components and 1.42417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079536Jy sigma=0.364853 ! Fit after self-cal, rms=0.079533Jy sigma=0.364827 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079533Jy sigma=0.364827 ! Fit after self-cal, rms=0.079017Jy sigma=0.362051 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6282 mas, bmaj=1.599 mas, bpa=-1.88 degrees ! Estimated noise=1.62348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.742147 Jy ! Component: 100 - total flux cleaned = 0.963096 Jy ! Component: 150 - total flux cleaned = 1.06831 Jy ! Component: 200 - total flux cleaned = 1.13398 Jy ! Total flux subtracted in 200 components = 1.13398 Jy ! Clean residual min=-0.018051 max=0.036905 Jy/beam ! Clean residual mean=0.000029 rms=0.003568 Jy/beam ! Combined flux in latest and established models = 1.13398 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.13398 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7755 mas, bmaj=1.932 mas, bpa=-2.02 degrees ! Estimated noise=1.10464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0788201 Jy ! Component: 100 - total flux cleaned = 0.131212 Jy ! Component: 150 - total flux cleaned = 0.169261 Jy ! Component: 200 - total flux cleaned = 0.197369 Jy ! Total flux subtracted in 200 components = 0.197369 Jy ! Clean residual min=-0.009979 max=0.019125 Jy/beam ! Clean residual mean=-0.000001 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 1.33135 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 66 components and 1.33135 Jy ! Inverting map ! Added new window around map position (-1.2, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218644 Jy ! Component: 100 - total flux cleaned = 0.0382052 Jy ! Component: 150 - total flux cleaned = 0.0508238 Jy ! Component: 200 - total flux cleaned = 0.0607433 Jy ! Total flux subtracted in 200 components = 0.0607433 Jy ! Clean residual min=-0.009510 max=0.010057 Jy/beam ! Clean residual mean=0.000003 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 1.3921 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 94 components and 1.3921 Jy ! Inverting map ! Added new window around map position (-3, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00994443 Jy ! Component: 100 - total flux cleaned = 0.0171847 Jy ! Component: 150 - total flux cleaned = 0.0229316 Jy ! Component: 200 - total flux cleaned = 0.0252047 Jy ! Total flux subtracted in 200 components = 0.0252047 Jy ! Clean residual min=-0.009547 max=0.006361 Jy/beam ! Clean residual mean=0.000005 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 1.4173 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 114 components and 1.4173 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=4.362 mas, bpa=2.935 degrees ! Estimated noise=1.58056 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532684 Jy ! Component: 100 - total flux cleaned = 0.00574327 Jy ! Component: 150 - total flux cleaned = 0.00540677 Jy ! Component: 200 - total flux cleaned = 0.0051226 Jy ! Total flux subtracted in 200 components = 0.0051226 Jy ! Clean residual min=-0.015021 max=0.009203 Jy/beam ! Clean residual mean=0.000011 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 1.42242 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00038095 Jy ! Component: 100 - total flux cleaned = -0.000611458 Jy ! Component: 150 - total flux cleaned = -0.000922806 Jy ! Component: 200 - total flux cleaned = -0.00119719 Jy ! Total flux subtracted in 200 components = -0.00119719 Jy ! Clean residual min=-0.014872 max=0.009262 Jy/beam ! Clean residual mean=0.000009 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 1.42123 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 150 components and 1.42123 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7755 mas, bmaj=1.932 mas, bpa=-2.02 degrees ! Estimated noise=1.10464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276025 Jy ! Component: 100 - total flux cleaned = 0.00338599 Jy ! Component: 150 - total flux cleaned = 0.00338104 Jy ! Component: 200 - total flux cleaned = 0.00311623 Jy ! Total flux subtracted in 200 components = 0.00311623 Jy ! Clean residual min=-0.008968 max=0.006317 Jy/beam ! Clean residual mean=0.000005 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 1.42434 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 164 components and 1.42434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078163Jy sigma=0.353877 ! Fit after self-cal, rms=0.078014Jy sigma=0.353143 wmodel J0836-2016_X_e_map.mod ! Writing 164 model components to file: J0836-2016_X_e_map.mod wobs J0836-2016_X_e_uvs.fits ! Writing UV FITS file: J0836-2016_X_e_uvs.fits wwins J0836-2016_X_e_map.win ! wwins: Wrote 9 windows to J0836-2016_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00369576 Jy ! Component: 100 - total flux cleaned = -0.00613545 Jy ! Component: 150 - total flux cleaned = -0.00718935 Jy ! Component: 200 - total flux cleaned = -0.00854637 Jy ! Component: 250 - total flux cleaned = -0.00965499 Jy ! Component: 300 - total flux cleaned = -0.0108049 Jy ! Component: 350 - total flux cleaned = -0.0114867 Jy ! Component: 400 - total flux cleaned = -0.0123985 Jy ! Component: 450 - total flux cleaned = -0.0129625 Jy ! Component: 500 - total flux cleaned = -0.0132766 Jy ! Component: 550 - total flux cleaned = -0.0132759 Jy ! Component: 600 - total flux cleaned = -0.0132772 Jy ! Component: 650 - total flux cleaned = -0.0132031 Jy ! Component: 700 - total flux cleaned = -0.0132029 Jy ! Component: 750 - total flux cleaned = -0.0129862 Jy ! Component: 800 - total flux cleaned = -0.0129156 Jy ! Component: 850 - total flux cleaned = -0.0129159 Jy ! Component: 900 - total flux cleaned = -0.0129843 Jy ! Component: 950 - total flux cleaned = -0.0129162 Jy ! Component: 1000 - total flux cleaned = -0.012984 Jy ! Component: 1050 - total flux cleaned = -0.0129854 Jy ! Component: 1100 - total flux cleaned = -0.0133785 Jy ! Component: 1150 - total flux cleaned = -0.0132472 Jy ! Component: 1200 - total flux cleaned = -0.0133751 Jy ! Component: 1250 - total flux cleaned = -0.013249 Jy ! Component: 1300 - total flux cleaned = -0.013437 Jy ! Component: 1350 - total flux cleaned = -0.0135599 Jy ! Component: 1400 - total flux cleaned = -0.0134373 Jy ! Component: 1450 - total flux cleaned = -0.0134979 Jy ! Component: 1500 - total flux cleaned = -0.0134975 Jy ! Component: 1550 - total flux cleaned = -0.0134387 Jy ! Component: 1600 - total flux cleaned = -0.0134383 Jy ! Component: 1650 - total flux cleaned = -0.0134388 Jy ! Component: 1700 - total flux cleaned = -0.0133817 Jy ! Component: 1750 - total flux cleaned = -0.0133251 Jy ! Component: 1800 - total flux cleaned = -0.0132682 Jy ! Component: 1850 - total flux cleaned = -0.0134923 Jy ! Component: 1900 - total flux cleaned = -0.013214 Jy ! Component: 1950 - total flux cleaned = -0.0131028 Jy ! Component: 2000 - total flux cleaned = -0.0132126 Jy ! Component: 2050 - total flux cleaned = -0.0127248 Jy ! Component: 2100 - total flux cleaned = -0.0129404 Jy ! Component: 2150 - total flux cleaned = -0.0128344 Jy ! Component: 2200 - total flux cleaned = -0.0127285 Jy ! Component: 2250 - total flux cleaned = -0.0125189 Jy ! Component: 2300 - total flux cleaned = -0.0125189 Jy ! Component: 2350 - total flux cleaned = -0.0125186 Jy ! Component: 2400 - total flux cleaned = -0.0125697 Jy ! Component: 2450 - total flux cleaned = -0.0123661 Jy ! Component: 2500 - total flux cleaned = -0.0123162 Jy ! Component: 2550 - total flux cleaned = -0.0121162 Jy ! Component: 2600 - total flux cleaned = -0.0121165 Jy ! Component: 2650 - total flux cleaned = -0.0121654 Jy ! Component: 2700 - total flux cleaned = -0.0121161 Jy ! Component: 2750 - total flux cleaned = -0.0121647 Jy ! Component: 2800 - total flux cleaned = -0.0120193 Jy ! Component: 2850 - total flux cleaned = -0.0123073 Jy ! Component: 2900 - total flux cleaned = -0.0118307 Jy ! Component: 2950 - total flux cleaned = -0.0119248 Jy ! Component: 3000 - total flux cleaned = -0.0118775 Jy ! Component: 3050 - total flux cleaned = -0.0116913 Jy ! Component: 3100 - total flux cleaned = -0.0115985 Jy ! Component: 3150 - total flux cleaned = -0.0116447 Jy ! Component: 3200 - total flux cleaned = -0.0113238 Jy ! Component: 3250 - total flux cleaned = -0.0113696 Jy ! Component: 3300 - total flux cleaned = -0.0112795 Jy ! Component: 3350 - total flux cleaned = -0.0110099 Jy ! Component: 3400 - total flux cleaned = -0.0108763 Jy ! Component: 3450 - total flux cleaned = -0.0108765 Jy ! Component: 3500 - total flux cleaned = -0.0107889 Jy ! Component: 3550 - total flux cleaned = -0.0107889 Jy ! Component: 3600 - total flux cleaned = -0.0109196 Jy ! Component: 3650 - total flux cleaned = -0.0108333 Jy ! Component: 3700 - total flux cleaned = -0.0106177 Jy ! Component: 3750 - total flux cleaned = -0.0104894 Jy ! Component: 3800 - total flux cleaned = -0.0104039 Jy ! Component: 3850 - total flux cleaned = -0.0102347 Jy ! Component: 3900 - total flux cleaned = -0.0102765 Jy ! Component: 3950 - total flux cleaned = -0.0101097 Jy ! Component: 4000 - total flux cleaned = -0.010068 Jy ! Component: 4050 - total flux cleaned = -0.00981983 Jy ! Total flux subtracted in 4096 components = -0.00986102 Jy ! Clean residual min=-0.002097 max=0.002050 Jy/beam ! Clean residual mean=0.000004 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 1.41448 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 487 components and 1.41448 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0836-2016_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7755 x 1.932 at -2.02 degrees (North through East) ! Clean map min=-0.0060378 max=0.99742 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0836-2016_X_e_map.fits wmodel /image_prod/ug002_uva//J0836-2016_X_e_map.mod ! Writing 487 model components to file: /image_prod/ug002_uva//J0836-2016_X_e_map.mod wobs /image_prod/ug002_uva//J0836-2016_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0836-2016_X_e_uvs.fits wwins /image_prod/ug002_uva//J0836-2016_X_e_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0836-2016_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.99742 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000726579 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.218538 0.218538 0.437075 0.87415 1.7483 3.4966 6.9932 13.9864 27.9728 55.9456 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.997 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1372.76 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0836-2016_X_e_dfm.log closed on Wed Mar 4 22:29:42 2020