! Started logfile: /image_prod/ug002_uva//J0832+1040_S_dfm.log on Wed Mar 4 22:25:17 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0832+1040_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0832+1040_S_uva.fits ! AN table 1: 60 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.895238 visibilities/baseline/integration-bin. ! Found source: J0832+1040 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 4512 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0832+1040_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.026858Jy sigma=7.603895 ! Fit after self-cal, rms=0.816044Jy sigma=6.077504 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=6.219 mas, bpa=-3.49 degrees ! Estimated noise=2.06895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144251 Jy ! Component: 100 - total flux cleaned = 0.176931 Jy ! Total flux subtracted in 100 components = 0.176931 Jy ! Clean residual min=-0.006980 max=0.011952 Jy/beam ! Clean residual mean=0.000011 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.176931 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.176931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076042Jy sigma=0.485647 ! Fit after self-cal, rms=0.076050Jy sigma=0.485590 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=6.773 mas, bpa=-3.847 degrees ! Estimated noise=1.46512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146112 Jy ! Component: 100 - total flux cleaned = 0.0217283 Jy ! Component: 150 - total flux cleaned = 0.0260112 Jy ! Component: 200 - total flux cleaned = 0.0288688 Jy ! Total flux subtracted in 200 components = 0.0288688 Jy ! Clean residual min=-0.005949 max=0.006054 Jy/beam ! Clean residual mean=-0.000000 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.2058 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 0.2058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073180Jy sigma=0.463720 ! Fit after self-cal, rms=0.073172Jy sigma=0.463498 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.134 x 6.773 at -3.847 degrees (North through East) ! Clean map min=-0.0057225 max=0.18629 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.02 KP 1.02 ! MK 1.03 NL 0.97 OV 0.92 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.08 HN 1.02 KP 1.03 ! MK 1.02 NL 1.10 OV 0.91 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 1.02 KP 0.96 ! MK 1.01 NL 0.89 OV 0.92 SC 0.96 ! ! ! Fit before self-cal, rms=0.073172Jy sigma=0.463498 ! Fit after self-cal, rms=0.070662Jy sigma=0.445614 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=6.806 mas, bpa=-3.835 degrees ! Estimated noise=1.46731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000611805 Jy ! Component: 100 - total flux cleaned = -0.000546639 Jy ! Component: 150 - total flux cleaned = -0.000485738 Jy ! Component: 200 - total flux cleaned = -0.000458629 Jy ! Total flux subtracted in 200 components = -0.000458629 Jy ! Clean residual min=-0.005332 max=0.005619 Jy/beam ! Clean residual mean=-0.000005 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.205341 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.205341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070617Jy sigma=0.445398 ! Fit after self-cal, rms=0.070622Jy sigma=0.445256 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070622Jy sigma=0.445256 ! Fit after self-cal, rms=0.073691Jy sigma=0.427966 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=6.794 mas, bpa=-3.692 degrees ! Estimated noise=1.4665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.57253e-06 Jy ! Component: 100 - total flux cleaned = -3.09005e-05 Jy ! Component: 150 - total flux cleaned = -5.10242e-05 Jy ! Component: 200 - total flux cleaned = -7.02485e-05 Jy ! Total flux subtracted in 200 components = -7.02485e-05 Jy ! Clean residual min=-0.003070 max=0.004287 Jy/beam ! Clean residual mean=0.000004 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.205271 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.205271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073670Jy sigma=0.427849 ! Fit after self-cal, rms=0.073712Jy sigma=0.427759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044283 Jy ! Component: 100 - total flux cleaned = 0.00728896 Jy ! Component: 150 - total flux cleaned = 0.00943364 Jy ! Component: 200 - total flux cleaned = 0.0111246 Jy ! Total flux subtracted in 200 components = 0.0111246 Jy ! Clean residual min=-0.002520 max=0.002657 Jy/beam ! Clean residual mean=0.000005 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.216396 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.216396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073361Jy sigma=0.424540 ! Fit after self-cal, rms=0.073342Jy sigma=0.424380 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073342Jy sigma=0.424380 ! Fit after self-cal, rms=0.073497Jy sigma=0.424086 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=6.805 mas, bpa=-3.791 degrees ! Estimated noise=1.46208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200385 Jy ! Component: 100 - total flux cleaned = 0.00340968 Jy ! Component: 150 - total flux cleaned = 0.00423522 Jy ! Component: 200 - total flux cleaned = 0.00474071 Jy ! Total flux subtracted in 200 components = 0.00474071 Jy ! Clean residual min=-0.002448 max=0.002183 Jy/beam ! Clean residual mean=0.000004 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.221136 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 0.221136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073404Jy sigma=0.423322 ! Fit after self-cal, rms=0.073403Jy sigma=0.423292 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670271 Jy ! Component: 100 - total flux cleaned = 0.000994045 Jy ! Component: 150 - total flux cleaned = 0.00131996 Jy ! Component: 200 - total flux cleaned = 0.00152756 Jy ! Total flux subtracted in 200 components = 0.00152756 Jy ! Clean residual min=-0.002385 max=0.002119 Jy/beam ! Clean residual mean=0.000004 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.222664 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.222664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073366Jy sigma=0.423058 ! Fit after self-cal, rms=0.073360Jy sigma=0.423052 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073360Jy sigma=0.423052 ! Fit after self-cal, rms=0.073407Jy sigma=0.422960 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.55 mas, bmaj=9.444 mas, bpa=-3.448 degrees ! Estimated noise=1.80655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139449 Jy ! Component: 100 - total flux cleaned = 0.00203352 Jy ! Component: 150 - total flux cleaned = 0.00259371 Jy ! Component: 200 - total flux cleaned = 0.00305004 Jy ! Total flux subtracted in 200 components = 0.00305004 Jy ! Clean residual min=-0.002269 max=0.002353 Jy/beam ! Clean residual mean=0.000006 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.225714 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 130 components and 0.225714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073394Jy sigma=0.422804 ! Fit after self-cal, rms=0.073392Jy sigma=0.422775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116475 Jy ! Component: 100 - total flux cleaned = 0.000518143 Jy ! Component: 150 - total flux cleaned = 0.000816276 Jy ! Component: 200 - total flux cleaned = 0.000967069 Jy ! Total flux subtracted in 200 components = 0.000967069 Jy ! Clean residual min=-0.002253 max=0.002291 Jy/beam ! Clean residual mean=0.000006 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.226681 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 138 components and 0.226681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073387Jy sigma=0.422735 ! Fit after self-cal, rms=0.073382Jy sigma=0.422716 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=6.809 mas, bpa=-3.811 degrees ! Estimated noise=1.4598 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.158 x 6.809 at -3.811 degrees (North through East) ! Clean map min=-0.0022932 max=0.18619 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=6.229 mas, bpa=-3.407 degrees ! Estimated noise=2.05494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143222 Jy ! Component: 100 - total flux cleaned = 0.175349 Jy ! Component: 150 - total flux cleaned = 0.187725 Jy ! Component: 200 - total flux cleaned = 0.194276 Jy ! Total flux subtracted in 200 components = 0.194276 Jy ! Clean residual min=-0.003715 max=0.003663 Jy/beam ! Clean residual mean=0.000005 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.194276 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.194276 Jy ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=6.809 mas, bpa=-3.811 degrees ! Estimated noise=1.4598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573162 Jy ! Component: 100 - total flux cleaned = 0.0100592 Jy ! Component: 150 - total flux cleaned = 0.013452 Jy ! Component: 200 - total flux cleaned = 0.0162209 Jy ! Total flux subtracted in 200 components = 0.0162209 Jy ! Clean residual min=-0.002625 max=0.002667 Jy/beam ! Clean residual mean=0.000003 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.210497 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 53 components and 0.210497 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.55 mas, bmaj=9.444 mas, bpa=-3.448 degrees ! Estimated noise=1.80655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416757 Jy ! Component: 100 - total flux cleaned = 0.00691655 Jy ! Component: 150 - total flux cleaned = 0.00897267 Jy ! Component: 200 - total flux cleaned = 0.0106551 Jy ! Total flux subtracted in 200 components = 0.0106551 Jy ! Clean residual min=-0.002303 max=0.002399 Jy/beam ! Clean residual mean=0.000005 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.221152 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140546 Jy ! Component: 100 - total flux cleaned = 0.00258739 Jy ! Component: 150 - total flux cleaned = 0.00347059 Jy ! Component: 200 - total flux cleaned = 0.00422313 Jy ! Total flux subtracted in 200 components = 0.00422313 Jy ! Clean residual min=-0.002096 max=0.002124 Jy/beam ! Clean residual mean=0.000005 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.225375 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 150 components and 0.225375 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=6.809 mas, bpa=-3.811 degrees ! Estimated noise=1.4598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870921 Jy ! Component: 100 - total flux cleaned = 0.00123601 Jy ! Component: 150 - total flux cleaned = 0.00148525 Jy ! Component: 200 - total flux cleaned = 0.00168263 Jy ! Total flux subtracted in 200 components = 0.00168263 Jy ! Clean residual min=-0.002334 max=0.002142 Jy/beam ! Clean residual mean=0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.227057 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 166 components and 0.227057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073401Jy sigma=0.422805 ! Fit after self-cal, rms=0.073399Jy sigma=0.422726 wmodel J0832+1040_S_map.mod ! Writing 166 model components to file: J0832+1040_S_map.mod wobs J0832+1040_S_uvs.fits ! Writing UV FITS file: J0832+1040_S_uvs.fits wwins J0832+1040_S_map.win ! wwins: Wrote 3 windows to J0832+1040_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649568 Jy ! Component: 100 - total flux cleaned = -0.000901934 Jy ! Component: 150 - total flux cleaned = -0.00103761 Jy ! Component: 200 - total flux cleaned = -0.00113494 Jy ! Component: 250 - total flux cleaned = -0.00122857 Jy ! Component: 300 - total flux cleaned = -0.00134825 Jy ! Component: 350 - total flux cleaned = -0.00149374 Jy ! Component: 400 - total flux cleaned = -0.00157891 Jy ! Component: 450 - total flux cleaned = -0.00179886 Jy ! Component: 500 - total flux cleaned = -0.00182538 Jy ! Component: 550 - total flux cleaned = -0.00185186 Jy ! Component: 600 - total flux cleaned = -0.0018776 Jy ! Component: 650 - total flux cleaned = -0.00187735 Jy ! Component: 700 - total flux cleaned = -0.00187718 Jy ! Component: 750 - total flux cleaned = -0.00192528 Jy ! Component: 800 - total flux cleaned = -0.00190165 Jy ! Component: 850 - total flux cleaned = -0.00190177 Jy ! Component: 900 - total flux cleaned = -0.00197033 Jy ! Component: 950 - total flux cleaned = -0.00194785 Jy ! Component: 1000 - total flux cleaned = -0.0019919 Jy ! Component: 1050 - total flux cleaned = -0.00194807 Jy ! Component: 1100 - total flux cleaned = -0.00190547 Jy ! Component: 1150 - total flux cleaned = -0.00188435 Jy ! Component: 1200 - total flux cleaned = -0.00184273 Jy ! Component: 1250 - total flux cleaned = -0.00182208 Jy ! Component: 1300 - total flux cleaned = -0.00182195 Jy ! Component: 1350 - total flux cleaned = -0.00178208 Jy ! Component: 1400 - total flux cleaned = -0.00174317 Jy ! Component: 1450 - total flux cleaned = -0.00174313 Jy ! Component: 1500 - total flux cleaned = -0.00168592 Jy ! Component: 1550 - total flux cleaned = -0.00168563 Jy ! Component: 1600 - total flux cleaned = -0.00164872 Jy ! Component: 1650 - total flux cleaned = -0.00172157 Jy ! Component: 1700 - total flux cleaned = -0.00170313 Jy ! Component: 1750 - total flux cleaned = -0.00168529 Jy ! Component: 1800 - total flux cleaned = -0.0017204 Jy ! Component: 1850 - total flux cleaned = -0.00175553 Jy ! Component: 1900 - total flux cleaned = -0.00179003 Jy ! Component: 1950 - total flux cleaned = -0.00180703 Jy ! Component: 2000 - total flux cleaned = -0.00184067 Jy ! Component: 2050 - total flux cleaned = -0.00185705 Jy ! Component: 2100 - total flux cleaned = -0.00192281 Jy ! Component: 2150 - total flux cleaned = -0.00192248 Jy ! Component: 2200 - total flux cleaned = -0.00192264 Jy ! Component: 2250 - total flux cleaned = -0.00197069 Jy ! Component: 2300 - total flux cleaned = -0.00203409 Jy ! Component: 2350 - total flux cleaned = -0.00203417 Jy ! Component: 2400 - total flux cleaned = -0.00209661 Jy ! Component: 2450 - total flux cleaned = -0.00214315 Jy ! Component: 2500 - total flux cleaned = -0.00218934 Jy ! Component: 2550 - total flux cleaned = -0.00220455 Jy ! Component: 2600 - total flux cleaned = -0.00228009 Jy ! Component: 2650 - total flux cleaned = -0.00234001 Jy ! Component: 2700 - total flux cleaned = -0.00235483 Jy ! Component: 2750 - total flux cleaned = -0.00235479 Jy ! Component: 2800 - total flux cleaned = -0.00238392 Jy ! Component: 2850 - total flux cleaned = -0.00242739 Jy ! Component: 2900 - total flux cleaned = -0.00245623 Jy ! Component: 2950 - total flux cleaned = -0.0025135 Jy ! Component: 3000 - total flux cleaned = -0.0025277 Jy ! Component: 3050 - total flux cleaned = -0.00251343 Jy ! Component: 3100 - total flux cleaned = -0.00251353 Jy ! Component: 3150 - total flux cleaned = -0.00258318 Jy ! Component: 3200 - total flux cleaned = -0.00256941 Jy ! Component: 3250 - total flux cleaned = -0.00262438 Jy ! Component: 3300 - total flux cleaned = -0.00254242 Jy ! Component: 3350 - total flux cleaned = -0.00258323 Jy ! Component: 3400 - total flux cleaned = -0.00261003 Jy ! Component: 3450 - total flux cleaned = -0.00258326 Jy ! Component: 3500 - total flux cleaned = -0.00257004 Jy ! Component: 3550 - total flux cleaned = -0.00255683 Jy ! Component: 3600 - total flux cleaned = -0.00258327 Jy ! Component: 3650 - total flux cleaned = -0.00258318 Jy ! Component: 3700 - total flux cleaned = -0.0025962 Jy ! Component: 3750 - total flux cleaned = -0.00259625 Jy ! Component: 3800 - total flux cleaned = -0.00259634 Jy ! Component: 3850 - total flux cleaned = -0.00259636 Jy ! Component: 3900 - total flux cleaned = -0.00263449 Jy ! Component: 3950 - total flux cleaned = -0.0026472 Jy ! Component: 4000 - total flux cleaned = -0.00265973 Jy ! Component: 4050 - total flux cleaned = -0.00265968 Jy ! Total flux subtracted in 4096 components = -0.00263476 Jy ! Clean residual min=-0.000844 max=0.000746 Jy/beam ! Clean residual mean=0.000000 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.224423 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 417 components and 0.224422 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0832+1040_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.158 x 6.809 at -3.811 degrees (North through East) ! Clean map min=-0.0014575 max=0.18731 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0832+1040_S_map.fits wmodel /image_prod/ug002_uva//J0832+1040_S_map.mod ! Writing 417 model components to file: /image_prod/ug002_uva//J0832+1040_S_map.mod wobs /image_prod/ug002_uva//J0832+1040_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0832+1040_S_uvs.fits wwins /image_prod/ug002_uva//J0832+1040_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0832+1040_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.187312 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206491 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.330718 0.330718 0.661436 1.32287 2.64574 5.29149 10.583 21.166 42.3319 84.6638 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.187 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 907.117 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0832+1040_S_dfm.log closed on Wed Mar 4 22:25:21 2020