! Started logfile: /image_prod/ug002_uva//J0819-0630_X_dfm.log on Wed Mar  4 22:20:29 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0819-0630_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0819-0630_X_uva.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.923852 visibilities/baseline/integration-bin.
! Found source: J0819-0630
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 37416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0819-0630_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002802Jy  sigma=9.580455
! Fit after  self-cal, rms=0.937498Jy  sigma=8.913659
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7021 mas, bmaj=1.773 mas, bpa=-3.287 degrees
! Estimated noise=0.73556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0456485 Jy
! Component: 100  -  total flux cleaned = 0.0626749 Jy
! Total flux subtracted in 100 components = 0.0626749 Jy
! Clean residual min=-0.003062 max=0.008249 Jy/beam
! Clean residual mean=-0.000006 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.0626749 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0626749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057558Jy  sigma=0.510062
! Fit after  self-cal, rms=0.057132Jy  sigma=0.506275
! Inverting map 
! Added new window around map position (0.4, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010437 Jy
! Component: 100  -  total flux cleaned = 0.0168812 Jy
! Total flux subtracted in 100 components = 0.0168812 Jy
! Clean residual min=-0.002285 max=0.003426 Jy/beam
! Clean residual mean=-0.000003 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.0795561 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 24 components and 0.0795561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054386Jy  sigma=0.475224
! Fit after  self-cal, rms=0.054311Jy  sigma=0.474710
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479113 Jy
! Component: 100  -  total flux cleaned = 0.00776979 Jy
! Total flux subtracted in 100 components = 0.00776979 Jy
! Clean residual min=-0.002082 max=0.002573 Jy/beam
! Clean residual mean=-0.000002 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.0873259 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.0873259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053663Jy  sigma=0.467721
! Fit after  self-cal, rms=0.053637Jy  sigma=0.467550
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9118 mas, bmaj=2.217 mas, bpa=-3.611 degrees
! Estimated noise=0.391674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004421 Jy
! Component: 100  -  total flux cleaned = 0.00729663 Jy
! Component: 150  -  total flux cleaned = 0.009452 Jy
! Component: 200  -  total flux cleaned = 0.0111183 Jy
! Total flux subtracted in 200 components = 0.0111183 Jy
! Clean residual min=-0.001969 max=0.002014 Jy/beam
! Clean residual mean=-0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0984441 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 72 components and 0.0984441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053209Jy  sigma=0.462871
! Fit after  self-cal, rms=0.053172Jy  sigma=0.462436
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9118 x 2.217 at -3.611 degrees (North through East)
! Clean map  min=-0.001746  max=0.061166 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.93     KP        1.07     
!   LA        1.08     MK        1.04     NL        1.05     OV        0.93     
!   PT        0.89     SC        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.93     KP        1.04     
!   LA        1.05     MK        1.05     NL        1.04     OV        0.92     
!   PT        0.90     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.95     KP        1.06     
!   LA        1.06     MK        1.16     NL        0.97     OV        0.90     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.93     KP        1.03     
!   LA        1.08     MK        1.06     NL        1.00     OV        0.92     
!   PT        0.90     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.96     KP        1.08     
!   LA        1.07     MK        0.96     NL        0.96     OV        0.92     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.99     KP        1.08     
!   LA        1.07     MK        1.05     NL        0.99     OV        0.88     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.92     KP        1.04     
!   LA        1.05     MK        0.96     NL        0.99     OV        0.93     
!   PT        0.91     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.98     KP        1.05     
!   LA        1.08     MK        1.01     NL        1.03     OV        0.91     
!   PT        0.91     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.93     KP        1.03     
!   LA        1.06     MK        0.96     NL        1.04     OV        0.93     
!   PT        0.89     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.94     KP        1.08     
!   LA        1.05     MK        0.95     NL        1.03     OV        0.93     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.96     KP        1.09     
!   LA        1.09     MK        0.96     NL        1.02     OV        0.90     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.94     KP        1.07     
!   LA        1.09     MK        0.98     NL        0.99     OV        0.93     
!   PT        0.88     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.053172Jy  sigma=0.462436
! Fit after  self-cal, rms=0.051625Jy  sigma=0.458695
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9132 mas, bmaj=2.23 mas, bpa=-3.718 degrees
! Estimated noise=0.385636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191978 Jy
! Component: 100  -  total flux cleaned = 0.00320449 Jy
! Component: 150  -  total flux cleaned = 0.00415944 Jy
! Component: 200  -  total flux cleaned = 0.00487708 Jy
! Total flux subtracted in 200 components = 0.00487708 Jy
! Clean residual min=-0.001212 max=0.001080 Jy/beam
! Clean residual mean=0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.103321 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 112 components and 0.103321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051541Jy  sigma=0.457734
! Fit after  self-cal, rms=0.051529Jy  sigma=0.457572
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051529Jy  sigma=0.457572
! Fit after  self-cal, rms=0.052124Jy  sigma=0.456766
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9126 mas, bmaj=2.234 mas, bpa=-3.583 degrees
! Estimated noise=0.386406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000828632 Jy
! Component: 100  -  total flux cleaned = 0.0013102 Jy
! Component: 150  -  total flux cleaned = 0.00165879 Jy
! Component: 200  -  total flux cleaned = 0.00193837 Jy
! Total flux subtracted in 200 components = 0.00193837 Jy
! Clean residual min=-0.001197 max=0.000993 Jy/beam
! Clean residual mean=0.000000 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.10526 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 129 components and 0.10526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052105Jy  sigma=0.456556
! Fit after  self-cal, rms=0.052109Jy  sigma=0.456525
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251473 Jy
! Component: 100  -  total flux cleaned = 0.000456424 Jy
! Component: 150  -  total flux cleaned = 0.000580324 Jy
! Component: 200  -  total flux cleaned = 0.000643707 Jy
! Total flux subtracted in 200 components = 0.000643707 Jy
! Clean residual min=-0.001242 max=0.000961 Jy/beam
! Clean residual mean=0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.105903 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 143 components and 0.105903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052100Jy  sigma=0.456448
! Fit after  self-cal, rms=0.052098Jy  sigma=0.456439
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052098Jy  sigma=0.456439
! Fit after  self-cal, rms=0.052269Jy  sigma=0.456235
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.911 mas, bmaj=2.235 mas, bpa=-3.61 degrees
! Estimated noise=0.38586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000286376 Jy
! Component: 100  -  total flux cleaned = 0.000374242 Jy
! Component: 150  -  total flux cleaned = 0.000410923 Jy
! Component: 200  -  total flux cleaned = 0.000433992 Jy
! Total flux subtracted in 200 components = 0.000433992 Jy
! Clean residual min=-0.001156 max=0.000948 Jy/beam
! Clean residual mean=0.000000 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.106337 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 152 components and 0.106337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052261Jy  sigma=0.456166
! Fit after  self-cal, rms=0.052265Jy  sigma=0.456151
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.20957e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139112 Jy
! Component: 150  -  total flux cleaned = 0.000191674 Jy
! Component: 200  -  total flux cleaned = 0.000231209 Jy
! Total flux subtracted in 200 components = 0.000231209 Jy
! Clean residual min=-0.001153 max=0.000932 Jy/beam
! Clean residual mean=0.000000 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.106568 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 157 components and 0.106568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052260Jy  sigma=0.456113
! Fit after  self-cal, rms=0.052259Jy  sigma=0.456108
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052259Jy  sigma=0.456108
! Fit after  self-cal, rms=0.052276Jy  sigma=0.456098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=3.836 mas, bpa=-1.897 degrees
! Estimated noise=0.463404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224566 Jy
! Component: 100  -  total flux cleaned = 0.000412875 Jy
! Component: 150  -  total flux cleaned = 0.000562351 Jy
! Component: 200  -  total flux cleaned = 0.000702177 Jy
! Total flux subtracted in 200 components = 0.000702177 Jy
! Clean residual min=-0.000718 max=0.000938 Jy/beam
! Clean residual mean=0.000000 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.107271 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 175 components and 0.107271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052275Jy  sigma=0.456094
! Fit after  self-cal, rms=0.052276Jy  sigma=0.456072
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.8, 8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000911404 Jy
! Component: 100  -  total flux cleaned = 0.00143017 Jy
! Component: 150  -  total flux cleaned = 0.00178612 Jy
! Component: 200  -  total flux cleaned = 0.00200897 Jy
! Total flux subtracted in 200 components = 0.00200897 Jy
! Clean residual min=-0.000680 max=0.000712 Jy/beam
! Clean residual mean=0.000000 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.10928 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 204 components and 0.10928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052265Jy  sigma=0.455948
! Fit after  self-cal, rms=0.052263Jy  sigma=0.455933
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.91 mas, bmaj=2.235 mas, bpa=-3.644 degrees
! Estimated noise=0.385487 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.91 x 2.235 at -3.644 degrees (North through East)
! Clean map  min=-0.00079212  max=0.060022 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7008 mas, bmaj=1.787 mas, bpa=-3.382 degrees
! Estimated noise=0.722931 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0457258 Jy
! Component: 100  -  total flux cleaned = 0.0633124 Jy
! Component: 150  -  total flux cleaned = 0.0731828 Jy
! Component: 200  -  total flux cleaned = 0.0793597 Jy
! Total flux subtracted in 200 components = 0.0793597 Jy
! Clean residual min=-0.002078 max=0.003296 Jy/beam
! Clean residual mean=-0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.0793597 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0793597 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.91 mas, bmaj=2.235 mas, bpa=-3.644 degrees
! Estimated noise=0.385487 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00680836 Jy
! Component: 100  -  total flux cleaned = 0.0113028 Jy
! Component: 150  -  total flux cleaned = 0.0145144 Jy
! Component: 200  -  total flux cleaned = 0.0169675 Jy
! Total flux subtracted in 200 components = 0.0169675 Jy
! Clean residual min=-0.001141 max=0.001450 Jy/beam
! Clean residual mean=-0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0963273 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 58 components and 0.0963273 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196335 Jy
! Component: 100  -  total flux cleaned = 0.00356704 Jy
! Component: 150  -  total flux cleaned = 0.00490367 Jy
! Component: 200  -  total flux cleaned = 0.00603498 Jy
! Total flux subtracted in 200 components = 0.00603498 Jy
! Clean residual min=-0.000949 max=0.000996 Jy/beam
! Clean residual mean=-0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.102362 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 82 components and 0.102362 Jy
! Inverting map 
! Added new window around map position (-6.6, 22.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00097389 Jy
! Component: 100  -  total flux cleaned = 0.0017086 Jy
! Component: 150  -  total flux cleaned = 0.00239962 Jy
! Component: 200  -  total flux cleaned = 0.0029951 Jy
! Total flux subtracted in 200 components = 0.0029951 Jy
! Clean residual min=-0.000878 max=0.000873 Jy/beam
! Clean residual mean=-0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.105357 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 113 components and 0.105357 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=3.836 mas, bpa=-1.897 degrees
! Estimated noise=0.463404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000961808 Jy
! Component: 100  -  total flux cleaned = 0.00165874 Jy
! Component: 150  -  total flux cleaned = 0.00222003 Jy
! Component: 200  -  total flux cleaned = 0.00269187 Jy
! Total flux subtracted in 200 components = 0.00269187 Jy
! Clean residual min=-0.000615 max=0.000751 Jy/beam
! Clean residual mean=0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.108049 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000400421 Jy
! Component: 100  -  total flux cleaned = 0.00074209 Jy
! Component: 150  -  total flux cleaned = 0.00103512 Jy
! Component: 200  -  total flux cleaned = 0.00128711 Jy
! Total flux subtracted in 200 components = 0.00128711 Jy
! Clean residual min=-0.000616 max=0.000700 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.109336 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 182 components and 0.109336 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.91 mas, bmaj=2.235 mas, bpa=-3.644 degrees
! Estimated noise=0.385487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013573 Jy
! Component: 100  -  total flux cleaned = 0.000170536 Jy
! Component: 150  -  total flux cleaned = 0.000185596 Jy
! Component: 200  -  total flux cleaned = 0.000245503 Jy
! Total flux subtracted in 200 components = 0.000245503 Jy
! Clean residual min=-0.000825 max=0.000791 Jy/beam
! Clean residual mean=0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.109582 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 209 components and 0.109582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052236Jy  sigma=0.455711
! Fit after  self-cal, rms=0.052223Jy  sigma=0.455655
wmodel J0819-0630_X_map.mod
! Writing 209 model components to file: J0819-0630_X_map.mod
wobs   J0819-0630_X_uvs.fits
! Writing UV FITS file: J0819-0630_X_uvs.fits
wwins  J0819-0630_X_map.win
! wwins: Wrote 6 windows to J0819-0630_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.05262e-05 Jy
! Component: 100  -  total flux cleaned = 0.000128436 Jy
! Component: 150  -  total flux cleaned = 0.00025203 Jy
! Component: 200  -  total flux cleaned = 0.000275341 Jy
! Component: 250  -  total flux cleaned = 0.000320591 Jy
! Component: 300  -  total flux cleaned = 0.000397297 Jy
! Component: 350  -  total flux cleaned = 0.000407916 Jy
! Component: 400  -  total flux cleaned = 0.000397548 Jy
! Component: 450  -  total flux cleaned = 0.00043835 Jy
! Component: 500  -  total flux cleaned = 0.000407907 Jy
! Component: 550  -  total flux cleaned = 0.000388162 Jy
! Component: 600  -  total flux cleaned = 0.00039771 Jy
! Component: 650  -  total flux cleaned = 0.000330438 Jy
! Component: 700  -  total flux cleaned = 0.000311471 Jy
! Component: 750  -  total flux cleaned = 0.000273978 Jy
! Component: 800  -  total flux cleaned = 0.000237127 Jy
! Component: 850  -  total flux cleaned = 0.000218761 Jy
! Component: 900  -  total flux cleaned = 0.000182766 Jy
! Component: 950  -  total flux cleaned = 0.000147191 Jy
! Component: 1000  -  total flux cleaned = 0.000120748 Jy
! Component: 1050  -  total flux cleaned = 0.000103398 Jy
! Component: 1100  -  total flux cleaned = 0.000111938 Jy
! Component: 1150  -  total flux cleaned = 7.78749e-05 Jy
! Component: 1200  -  total flux cleaned = 6.10278e-05 Jy
! Component: 1250  -  total flux cleaned = 3.59659e-05 Jy
! Component: 1300  -  total flux cleaned = 1.12586e-05 Jy
! Component: 1350  -  total flux cleaned = -2.14115e-05 Jy
! Component: 1400  -  total flux cleaned = -5.19337e-06 Jy
! Component: 1450  -  total flux cleaned = -3.72401e-05 Jy
! Component: 1500  -  total flux cleaned = -6.90389e-05 Jy
! Component: 1550  -  total flux cleaned = -4.53105e-05 Jy
! Component: 1600  -  total flux cleaned = -5.30817e-05 Jy
! Component: 1650  -  total flux cleaned = -4.52999e-05 Jy
! Component: 1700  -  total flux cleaned = -8.37444e-05 Jy
! Component: 1750  -  total flux cleaned = -5.32025e-05 Jy
! Component: 1800  -  total flux cleaned = -7.58657e-05 Jy
! Component: 1850  -  total flux cleaned = -7.58809e-05 Jy
! Component: 1900  -  total flux cleaned = -7.59424e-05 Jy
! Component: 1950  -  total flux cleaned = -5.38372e-05 Jy
! Component: 2000  -  total flux cleaned = -6.12077e-05 Jy
! Component: 2050  -  total flux cleaned = -4.66921e-05 Jy
! Component: 2100  -  total flux cleaned = -4.67414e-05 Jy
! Component: 2150  -  total flux cleaned = -3.23844e-05 Jy
! Component: 2200  -  total flux cleaned = -4.66905e-05 Jy
! Component: 2250  -  total flux cleaned = -4.66498e-05 Jy
! Component: 2300  -  total flux cleaned = -1.14636e-05 Jy
! Component: 2350  -  total flux cleaned = -3.24566e-05 Jy
! Component: 2400  -  total flux cleaned = -1.1655e-05 Jy
! Component: 2450  -  total flux cleaned = 1.59495e-05 Jy
! Component: 2500  -  total flux cleaned = 2.28671e-06 Jy
! Component: 2550  -  total flux cleaned = 1.58419e-05 Jy
! Component: 2600  -  total flux cleaned = 9.05972e-06 Jy
! Component: 2650  -  total flux cleaned = 3.59241e-05 Jy
! Component: 2700  -  total flux cleaned = 4.92413e-05 Jy
! Component: 2750  -  total flux cleaned = 4.9227e-05 Jy
! Component: 2800  -  total flux cleaned = 6.90671e-05 Jy
! Component: 2850  -  total flux cleaned = 7.55845e-05 Jy
! Component: 2900  -  total flux cleaned = 8.21621e-05 Jy
! Component: 2950  -  total flux cleaned = 9.51533e-05 Jy
! Component: 3000  -  total flux cleaned = 0.000133921 Jy
! Component: 3050  -  total flux cleaned = 0.000140296 Jy
! Component: 3100  -  total flux cleaned = 0.000159409 Jy
! Component: 3150  -  total flux cleaned = 0.000159422 Jy
! Component: 3200  -  total flux cleaned = 0.000165669 Jy
! Component: 3250  -  total flux cleaned = 0.000171903 Jy
! Component: 3300  -  total flux cleaned = 0.000184482 Jy
! Component: 3350  -  total flux cleaned = 0.000184456 Jy
! Component: 3400  -  total flux cleaned = 0.000227756 Jy
! Component: 3450  -  total flux cleaned = 0.000215446 Jy
! Component: 3500  -  total flux cleaned = 0.000209344 Jy
! Component: 3550  -  total flux cleaned = 0.000245877 Jy
! Component: 3600  -  total flux cleaned = 0.000239823 Jy
! Component: 3650  -  total flux cleaned = 0.00024583 Jy
! Component: 3700  -  total flux cleaned = 0.000245888 Jy
! Component: 3750  -  total flux cleaned = 0.000257814 Jy
! Component: 3800  -  total flux cleaned = 0.000263804 Jy
! Component: 3850  -  total flux cleaned = 0.000269726 Jy
! Component: 3900  -  total flux cleaned = 0.000305071 Jy
! Component: 3950  -  total flux cleaned = 0.000305066 Jy
! Component: 4000  -  total flux cleaned = 0.000316699 Jy
! Component: 4050  -  total flux cleaned = 0.000305101 Jy
! Total flux subtracted in 4096 components = 0.000322454 Jy
! Clean residual min=-0.000318 max=0.000337 Jy/beam
! Clean residual mean=0.000000 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.109904 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 505 components and 0.109904 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0819-0630_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.91 x 2.235 at -3.644 degrees (North through East)
! Clean map  min=-0.00052643  max=0.059409 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0819-0630_X_map.fits
wmodel /image_prod/ug002_uva//J0819-0630_X_map.mod
! Writing 505 model components to file: /image_prod/ug002_uva//J0819-0630_X_map.mod
wobs   /image_prod/ug002_uva//J0819-0630_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0819-0630_X_uvs.fits
wwins  /image_prod/ug002_uva//J0819-0630_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0819-0630_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0594085 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.87419e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.498625 0.498625 0.99725 1.9945 3.989 7.978 15.956 31.912 63.824
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  601.654 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0819-0630_X_dfm.log closed on Wed Mar  4 22:20:34 2020