! Started logfile: /image_prod/ug002_uva//J0817+2352_S_dfm.log on Wed Mar  4 22:18:33 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0817+2352_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0817+2352_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.968519 visibilities/baseline/integration-bin.
! Found source: J0817+2352
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6276 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0817+2352_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016336Jy  sigma=8.952975
! Fit after  self-cal, rms=0.818062Jy  sigma=7.193592
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.127 mas, bmaj=10.32 mas, bpa=-18.68 degrees
! Estimated noise=1.55692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139304 Jy
! Component: 100  -  total flux cleaned = 0.176077 Jy
! Total flux subtracted in 100 components = 0.176077 Jy
! Clean residual min=-0.009838 max=0.027681 Jy/beam
! Clean residual mean=-0.000029 rms=0.002755 Jy/beam
! Combined flux in latest and established models = 0.176077 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.176077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103994Jy  sigma=0.595082
! Fit after  self-cal, rms=0.103668Jy  sigma=0.593846
! Inverting map 
! Added new window around map position (-6, 3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245209 Jy
! Component: 100  -  total flux cleaned = 0.0370432 Jy
! Total flux subtracted in 100 components = 0.0370432 Jy
! Clean residual min=-0.006905 max=0.007671 Jy/beam
! Clean residual mean=-0.000012 rms=0.001734 Jy/beam
! Combined flux in latest and established models = 0.21312 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.21312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096741Jy  sigma=0.503626
! Fit after  self-cal, rms=0.095956Jy  sigma=0.496084
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100144 Jy
! Component: 100  -  total flux cleaned = 0.0149274 Jy
! Total flux subtracted in 100 components = 0.0149274 Jy
! Clean residual min=-0.005023 max=0.004865 Jy/beam
! Clean residual mean=-0.000006 rms=0.001326 Jy/beam
! Combined flux in latest and established models = 0.228047 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 38 components and 0.228047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094517Jy  sigma=0.480014
! Fit after  self-cal, rms=0.094342Jy  sigma=0.478644
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.831 mas, bmaj=11.02 mas, bpa=-17.76 degrees
! Estimated noise=1.06048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412311 Jy
! Component: 100  -  total flux cleaned = 0.00426871 Jy
! Component: 150  -  total flux cleaned = 0.00427309 Jy
! Component: 200  -  total flux cleaned = 0.00417549 Jy
! Total flux subtracted in 200 components = 0.00417549 Jy
! Clean residual min=-0.003835 max=0.004594 Jy/beam
! Clean residual mean=-0.000005 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.232223 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 63 components and 0.232223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093508Jy  sigma=0.474174
! Fit after  self-cal, rms=0.093433Jy  sigma=0.473568
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.831 x 11.02 at -17.76 degrees (North through East)
! Clean map  min=-0.0039185  max=0.1783 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.97     KP        0.98     
!   LA        1.00     MK        1.03     NL        0.96     OV        0.99     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.03     HN        0.96     KP        0.99     
!   LA        1.02     MK        1.04     NL        1.09     OV        1.04     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.02     HN        1.01     KP        0.98     
!   LA        1.03     MK        1.00     NL        0.96     OV        0.97     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.093433Jy  sigma=0.473568
! Fit after  self-cal, rms=0.089127Jy  sigma=0.468199
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.847 mas, bmaj=10.95 mas, bpa=-17.76 degrees
! Estimated noise=1.05725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191076 Jy
! Component: 100  -  total flux cleaned = 0.0020376 Jy
! Component: 150  -  total flux cleaned = 0.00195155 Jy
! Component: 200  -  total flux cleaned = 0.00191475 Jy
! Total flux subtracted in 200 components = 0.00191475 Jy
! Clean residual min=-0.003523 max=0.004137 Jy/beam
! Clean residual mean=-0.000009 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.234137 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.234137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088993Jy  sigma=0.467360
! Fit after  self-cal, rms=0.088963Jy  sigma=0.467171
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088963Jy  sigma=0.467171
! Fit after  self-cal, rms=0.062952Jy  sigma=0.437481
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.844 mas, bmaj=10.86 mas, bpa=-17.91 degrees
! Estimated noise=1.05462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113481 Jy
! Component: 100  -  total flux cleaned = 0.00129627 Jy
! Component: 150  -  total flux cleaned = 0.00143259 Jy
! Component: 200  -  total flux cleaned = 0.00155018 Jy
! Total flux subtracted in 200 components = 0.00155018 Jy
! Clean residual min=-0.001926 max=0.002357 Jy/beam
! Clean residual mean=-0.000002 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.235688 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.235688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062856Jy  sigma=0.436773
! Fit after  self-cal, rms=0.062866Jy  sigma=0.436627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (29, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014368 Jy
! Component: 100  -  total flux cleaned = 0.00130015 Jy
! Component: 150  -  total flux cleaned = 0.00125762 Jy
! Component: 200  -  total flux cleaned = 0.00122275 Jy
! Total flux subtracted in 200 components = 0.00122275 Jy
! Clean residual min=-0.001973 max=0.001773 Jy/beam
! Clean residual mean=-0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.23691 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 115 components and 0.23691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062773Jy  sigma=0.435828
! Fit after  self-cal, rms=0.062766Jy  sigma=0.435799
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062766Jy  sigma=0.435799
! Fit after  self-cal, rms=0.062418Jy  sigma=0.435696
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=10.84 mas, bpa=-17.92 degrees
! Estimated noise=1.05441 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000692629 Jy
! Component: 100  -  total flux cleaned = 0.000842126 Jy
! Component: 150  -  total flux cleaned = 0.000909155 Jy
! Component: 200  -  total flux cleaned = 0.00103089 Jy
! Total flux subtracted in 200 components = 0.00103089 Jy
! Clean residual min=-0.001901 max=0.001727 Jy/beam
! Clean residual mean=-0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.237941 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 0.237941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062372Jy  sigma=0.435342
! Fit after  self-cal, rms=0.062366Jy  sigma=0.435329
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.58341e-05 Jy
! Component: 100  -  total flux cleaned = 3.71317e-05 Jy
! Component: 150  -  total flux cleaned = 9.05964e-05 Jy
! Component: 200  -  total flux cleaned = 0.000116112 Jy
! Total flux subtracted in 200 components = 0.000116112 Jy
! Clean residual min=-0.001864 max=0.001648 Jy/beam
! Clean residual mean=-0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.238057 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 145 components and 0.238057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062339Jy  sigma=0.435141
! Fit after  self-cal, rms=0.062337Jy  sigma=0.435134
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062337Jy  sigma=0.435134
! Fit after  self-cal, rms=0.062123Jy  sigma=0.435081
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.978 mas, bmaj=12.04 mas, bpa=-14.81 degrees
! Estimated noise=1.2018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681939 Jy
! Component: 100  -  total flux cleaned = 0.000739926 Jy
! Component: 150  -  total flux cleaned = 0.000696509 Jy
! Component: 200  -  total flux cleaned = 0.000656451 Jy
! Total flux subtracted in 200 components = 0.000656451 Jy
! Clean residual min=-0.001668 max=0.001306 Jy/beam
! Clean residual mean=-0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.238714 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 167 components and 0.238714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062097Jy  sigma=0.434973
! Fit after  self-cal, rms=0.062093Jy  sigma=0.434955
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116311 Jy
! Component: 100  -  total flux cleaned = 5.74877e-05 Jy
! Component: 150  -  total flux cleaned = 3.65123e-06 Jy
! Component: 200  -  total flux cleaned = -1.29102e-05 Jy
! Total flux subtracted in 200 components = -1.29102e-05 Jy
! Clean residual min=-0.001632 max=0.001255 Jy/beam
! Clean residual mean=-0.000001 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.238701 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 188 components and 0.238701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062080Jy  sigma=0.434903
! Fit after  self-cal, rms=0.062079Jy  sigma=0.434894
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.839 mas, bmaj=10.82 mas, bpa=-17.93 degrees
! Estimated noise=1.05457 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.839 x 10.82 at -17.93 degrees (North through East)
! Clean map  min=-0.0018433  max=0.17761 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.134 mas, bmaj=10.21 mas, bpa=-18.93 degrees
! Estimated noise=1.54663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137915 Jy
! Component: 100  -  total flux cleaned = 0.18169 Jy
! Component: 150  -  total flux cleaned = 0.204359 Jy
! Component: 200  -  total flux cleaned = 0.217297 Jy
! Total flux subtracted in 200 components = 0.217297 Jy
! Clean residual min=-0.003273 max=0.006471 Jy/beam
! Clean residual mean=-0.000010 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.217297 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.217297 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.839 mas, bmaj=10.82 mas, bpa=-17.93 degrees
! Estimated noise=1.05457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00965673 Jy
! Component: 100  -  total flux cleaned = 0.0151197 Jy
! Component: 150  -  total flux cleaned = 0.0184743 Jy
! Component: 200  -  total flux cleaned = 0.0204777 Jy
! Total flux subtracted in 200 components = 0.0204777 Jy
! Clean residual min=-0.002172 max=0.001759 Jy/beam
! Clean residual mean=-0.000001 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.237775 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 55 components and 0.237775 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.978 mas, bmaj=12.04 mas, bpa=-14.81 degrees
! Estimated noise=1.2018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013824 Jy
! Component: 100  -  total flux cleaned = 0.00161427 Jy
! Component: 150  -  total flux cleaned = 0.00161818 Jy
! Component: 200  -  total flux cleaned = 0.00157974 Jy
! Total flux subtracted in 200 components = 0.00157974 Jy
! Clean residual min=-0.001920 max=0.001375 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.239354 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.31777e-05 Jy
! Component: 100  -  total flux cleaned = -0.000138957 Jy
! Component: 150  -  total flux cleaned = -0.000199134 Jy
! Component: 200  -  total flux cleaned = -0.000279469 Jy
! Total flux subtracted in 200 components = -0.000279469 Jy
! Clean residual min=-0.001786 max=0.001307 Jy/beam
! Clean residual mean=-0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.239075 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 93 components and 0.239075 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.839 mas, bmaj=10.82 mas, bpa=-17.93 degrees
! Estimated noise=1.05457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000143391 Jy
! Component: 100  -  total flux cleaned = -0.000257836 Jy
! Component: 150  -  total flux cleaned = -0.00032336 Jy
! Component: 200  -  total flux cleaned = -0.000264977 Jy
! Total flux subtracted in 200 components = -0.000264977 Jy
! Clean residual min=-0.001893 max=0.001578 Jy/beam
! Clean residual mean=-0.000001 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.23881 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 125 components and 0.23881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062114Jy  sigma=0.435220
! Fit after  self-cal, rms=0.062097Jy  sigma=0.435103
wmodel J0817+2352_S_map.mod
! Writing 125 model components to file: J0817+2352_S_map.mod
wobs   J0817+2352_S_uvs.fits
! Writing UV FITS file: J0817+2352_S_uvs.fits
wwins  J0817+2352_S_map.win
! wwins: Wrote 3 windows to J0817+2352_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.37151e-05 Jy
! Component: 100  -  total flux cleaned = -0.000191437 Jy
! Component: 150  -  total flux cleaned = -0.000268135 Jy
! Component: 200  -  total flux cleaned = -0.000364824 Jy
! Component: 250  -  total flux cleaned = -0.000458291 Jy
! Component: 300  -  total flux cleaned = -0.000617433 Jy
! Component: 350  -  total flux cleaned = -0.000838579 Jy
! Component: 400  -  total flux cleaned = -0.000945977 Jy
! Component: 450  -  total flux cleaned = -0.0010293 Jy
! Component: 500  -  total flux cleaned = -0.00109003 Jy
! Component: 550  -  total flux cleaned = -0.00108979 Jy
! Component: 600  -  total flux cleaned = -0.00112899 Jy
! Component: 650  -  total flux cleaned = -0.00118686 Jy
! Component: 700  -  total flux cleaned = -0.00120533 Jy
! Component: 750  -  total flux cleaned = -0.00116807 Jy
! Component: 800  -  total flux cleaned = -0.00118634 Jy
! Component: 850  -  total flux cleaned = -0.00116869 Jy
! Component: 900  -  total flux cleaned = -0.00118663 Jy
! Component: 950  -  total flux cleaned = -0.0012043 Jy
! Component: 1000  -  total flux cleaned = -0.00120434 Jy
! Component: 1050  -  total flux cleaned = -0.00123855 Jy
! Component: 1100  -  total flux cleaned = -0.00123862 Jy
! Component: 1150  -  total flux cleaned = -0.00127187 Jy
! Component: 1200  -  total flux cleaned = -0.0012394 Jy
! Component: 1250  -  total flux cleaned = -0.00125559 Jy
! Component: 1300  -  total flux cleaned = -0.00125569 Jy
! Component: 1350  -  total flux cleaned = -0.00125552 Jy
! Component: 1400  -  total flux cleaned = -0.00120862 Jy
! Component: 1450  -  total flux cleaned = -0.00119314 Jy
! Component: 1500  -  total flux cleaned = -0.00111691 Jy
! Component: 1550  -  total flux cleaned = -0.00110162 Jy
! Component: 1600  -  total flux cleaned = -0.00108659 Jy
! Component: 1650  -  total flux cleaned = -0.00104229 Jy
! Component: 1700  -  total flux cleaned = -0.00107147 Jy
! Component: 1750  -  total flux cleaned = -0.00108595 Jy
! Component: 1800  -  total flux cleaned = -0.00108585 Jy
! Component: 1850  -  total flux cleaned = -0.00107155 Jy
! Component: 1900  -  total flux cleaned = -0.00107163 Jy
! Component: 1950  -  total flux cleaned = -0.00109967 Jy
! Component: 2000  -  total flux cleaned = -0.00107201 Jy
! Component: 2050  -  total flux cleaned = -0.00109946 Jy
! Component: 2100  -  total flux cleaned = -0.00109939 Jy
! Component: 2150  -  total flux cleaned = -0.00109942 Jy
! Component: 2200  -  total flux cleaned = -0.00109941 Jy
! Component: 2250  -  total flux cleaned = -0.00113897 Jy
! Component: 2300  -  total flux cleaned = -0.00111262 Jy
! Component: 2350  -  total flux cleaned = -0.0010738 Jy
! Component: 2400  -  total flux cleaned = -0.00104819 Jy
! Component: 2450  -  total flux cleaned = -0.00107378 Jy
! Component: 2500  -  total flux cleaned = -0.00107365 Jy
! Component: 2550  -  total flux cleaned = -0.00103586 Jy
! Component: 2600  -  total flux cleaned = -0.00098603 Jy
! Component: 2650  -  total flux cleaned = -0.00097369 Jy
! Component: 2700  -  total flux cleaned = -0.000985763 Jy
! Component: 2750  -  total flux cleaned = -0.000924728 Jy
! Component: 2800  -  total flux cleaned = -0.000924806 Jy
! Component: 2850  -  total flux cleaned = -0.000924668 Jy
! Component: 2900  -  total flux cleaned = -0.000888969 Jy
! Component: 2950  -  total flux cleaned = -0.000936339 Jy
! Component: 3000  -  total flux cleaned = -0.000995103 Jy
! Component: 3050  -  total flux cleaned = -0.00100676 Jy
! Component: 3100  -  total flux cleaned = -0.00104137 Jy
! Component: 3150  -  total flux cleaned = -0.00105311 Jy
! Component: 3200  -  total flux cleaned = -0.00112186 Jy
! Component: 3250  -  total flux cleaned = -0.00114462 Jy
! Component: 3300  -  total flux cleaned = -0.001201 Jy
! Component: 3350  -  total flux cleaned = -0.00117868 Jy
! Component: 3400  -  total flux cleaned = -0.0012344 Jy
! Component: 3450  -  total flux cleaned = -0.00121239 Jy
! Component: 3500  -  total flux cleaned = -0.00127843 Jy
! Component: 3550  -  total flux cleaned = -0.00127834 Jy
! Component: 3600  -  total flux cleaned = -0.00126745 Jy
! Component: 3650  -  total flux cleaned = -0.00131062 Jy
! Component: 3700  -  total flux cleaned = -0.00132134 Jy
! Component: 3750  -  total flux cleaned = -0.00140665 Jy
! Component: 3800  -  total flux cleaned = -0.001396 Jy
! Component: 3850  -  total flux cleaned = -0.00139602 Jy
! Component: 3900  -  total flux cleaned = -0.00141708 Jy
! Component: 3950  -  total flux cleaned = -0.00143796 Jy
! Component: 4000  -  total flux cleaned = -0.00148977 Jy
! Component: 4050  -  total flux cleaned = -0.00152067 Jy
! Total flux subtracted in 4096 components = -0.00153088 Jy
! Clean residual min=-0.000837 max=0.000609 Jy/beam
! Clean residual mean=-0.000001 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.237279 Jy
keep
! Adding 261 model components to the UV plane model.
! The established model now contains 386 components and 0.237279 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0817+2352_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.839 x 10.82 at -17.93 degrees (North through East)
! Clean map  min=-0.0015278  max=0.17722 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0817+2352_S_map.fits
wmodel /image_prod/ug002_uva//J0817+2352_S_map.mod
! Writing 386 model components to file: /image_prod/ug002_uva//J0817+2352_S_map.mod
wobs   /image_prod/ug002_uva//J0817+2352_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0817+2352_S_uvs.fits
wwins  /image_prod/ug002_uva//J0817+2352_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0817+2352_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.177224 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000197114 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.333669 0.333669 0.667338 1.33468 2.66935 5.33871 10.6774 21.3548 42.7097 85.4193
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.177 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  899.094 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0817+2352_S_dfm.log closed on Wed Mar  4 22:18:36 2020