! Started logfile: /image_prod/ug002_uva//J0813+2542_X_dfm.log on Wed Mar  4 22:17:15 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0813+2542_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0813+2542_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.97037 visibilities/baseline/integration-bin.
! Found source: J0813+2542
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 25152 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0813+2542_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.046471Jy  sigma=9.085642
! Fit after  self-cal, rms=0.713425Jy  sigma=6.207557
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7588 mas, bmaj=2.417 mas, bpa=-18.6 degrees
! Estimated noise=1.01614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.20756 Jy
! Component: 100  -  total flux cleaned = 0.277083 Jy
! Total flux subtracted in 100 components = 0.277083 Jy
! Clean residual min=-0.013265 max=0.039298 Jy/beam
! Clean residual mean=-0.000021 rms=0.003598 Jy/beam
! Combined flux in latest and established models = 0.277083 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.277083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099799Jy  sigma=0.821078
! Fit after  self-cal, rms=0.099768Jy  sigma=0.820590
! Inverting map 
! Added new window around map position (-1.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0398578 Jy
! Component: 100  -  total flux cleaned = 0.0628083 Jy
! Total flux subtracted in 100 components = 0.0628083 Jy
! Clean residual min=-0.012490 max=0.016117 Jy/beam
! Clean residual mean=-0.000010 rms=0.002343 Jy/beam
! Combined flux in latest and established models = 0.339891 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.339891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078467Jy  sigma=0.625518
! Fit after  self-cal, rms=0.077576Jy  sigma=0.616906
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168794 Jy
! Component: 100  -  total flux cleaned = 0.025139 Jy
! Total flux subtracted in 100 components = 0.025139 Jy
! Clean residual min=-0.010426 max=0.010300 Jy/beam
! Clean residual mean=-0.000006 rms=0.001934 Jy/beam
! Combined flux in latest and established models = 0.36503 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.36503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072881Jy  sigma=0.571305
! Fit after  self-cal, rms=0.072670Jy  sigma=0.569403
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=2.641 mas, bpa=-17.5 degrees
! Estimated noise=0.524852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110446 Jy
! Component: 100  -  total flux cleaned = 0.0147609 Jy
! Component: 150  -  total flux cleaned = 0.016066 Jy
! Component: 200  -  total flux cleaned = 0.0173483 Jy
! Total flux subtracted in 200 components = 0.0173483 Jy
! Clean residual min=-0.008221 max=0.009975 Jy/beam
! Clean residual mean=-0.000007 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 0.382379 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 39 components and 0.382379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070743Jy  sigma=0.549048
! Fit after  self-cal, rms=0.070666Jy  sigma=0.548406
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 2.641 at -17.5 degrees (North through East)
! Clean map  min=-0.0077351  max=0.28037 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.03     HN        0.98     KP        1.08     
!   LA        0.99     MK        1.05     NL        1.11     OV        0.93     
!   PT        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.02     HN        0.98     KP        1.07     
!   LA        1.00     MK        1.03     NL        1.12     OV        0.91     
!   PT        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.03     HN        1.00     KP        1.08     
!   LA        1.00     MK        1.06     NL        1.12     OV        0.91     
!   PT        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.01     HN        0.99     KP        1.09     
!   LA        1.01     MK        1.05     NL        1.11     OV        0.91     
!   PT        0.93     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        0.98     KP        1.08     
!   LA        1.00     MK        1.03     NL        1.11     OV        0.92     
!   PT        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.02     HN        0.99     KP        1.08     
!   LA        1.00     MK        1.04     NL        1.11     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        0.98     KP        1.08     
!   LA        1.01     MK        1.04     NL        1.12     OV        0.90     
!   PT        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.98     KP        1.08     
!   LA        1.01     MK        1.04     NL        1.13     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        1.00     KP        1.06     
!   LA        1.01     MK        1.04     NL        1.10     OV        0.91     
!   PT        0.92     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.02     HN        0.99     KP        1.08     
!   LA        0.99     MK        1.03     NL        1.13     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.98     KP        1.10     
!   LA        0.99     MK        1.04     NL        1.10     OV        0.92     
!   PT        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        0.99     KP        1.08     
!   LA        1.01     MK        1.11     NL        1.09     OV        0.91     
!   PT        0.93     
! 
! 
! Fit before self-cal, rms=0.070666Jy  sigma=0.548406
! Fit after  self-cal, rms=0.063415Jy  sigma=0.491492
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=2.607 mas, bpa=-17.3 degrees
! Estimated noise=0.523518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159491 Jy
! Component: 100  -  total flux cleaned = 0.000310543 Jy
! Component: 150  -  total flux cleaned = 0.000681202 Jy
! Component: 200  -  total flux cleaned = 0.000686341 Jy
! Total flux subtracted in 200 components = 0.000686341 Jy
! Clean residual min=-0.004597 max=0.004520 Jy/beam
! Clean residual mean=-0.000004 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.383065 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 62 components and 0.383065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062533Jy  sigma=0.486549
! Fit after  self-cal, rms=0.062509Jy  sigma=0.486125
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062509Jy  sigma=0.486125
! Fit after  self-cal, rms=0.062626Jy  sigma=0.464352
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.612 mas, bpa=-17.43 degrees
! Estimated noise=0.524797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00208291 Jy
! Component: 100  -  total flux cleaned = -0.00217615 Jy
! Component: 150  -  total flux cleaned = -0.00177359 Jy
! Component: 200  -  total flux cleaned = -0.00152467 Jy
! Total flux subtracted in 200 components = -0.00152467 Jy
! Clean residual min=-0.002320 max=0.001567 Jy/beam
! Clean residual mean=-0.000002 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.38154 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 0.38154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062429Jy  sigma=0.462520
! Fit after  self-cal, rms=0.062477Jy  sigma=0.462328
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.44608e-05 Jy
! Component: 100  -  total flux cleaned = 0.000326278 Jy
! Component: 150  -  total flux cleaned = 0.000552721 Jy
! Component: 200  -  total flux cleaned = 0.000788717 Jy
! Total flux subtracted in 200 components = 0.000788717 Jy
! Clean residual min=-0.002129 max=0.001487 Jy/beam
! Clean residual mean=-0.000002 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.382329 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 0.382329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062424Jy  sigma=0.461854
! Fit after  self-cal, rms=0.062420Jy  sigma=0.461829
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062420Jy  sigma=0.461829
! Fit after  self-cal, rms=0.062516Jy  sigma=0.461452
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.61 mas, bpa=-17.46 degrees
! Estimated noise=0.524696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0011354 Jy
! Component: 100  -  total flux cleaned = -0.00131145 Jy
! Component: 150  -  total flux cleaned = -0.00124484 Jy
! Component: 200  -  total flux cleaned = -0.0011233 Jy
! Total flux subtracted in 200 components = -0.0011233 Jy
! Clean residual min=-0.001828 max=0.001282 Jy/beam
! Clean residual mean=-0.000002 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.381206 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 100 components and 0.381206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062456Jy  sigma=0.460928
! Fit after  self-cal, rms=0.062455Jy  sigma=0.460906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.20744e-06 Jy
! Component: 100  -  total flux cleaned = 0.000163719 Jy
! Component: 150  -  total flux cleaned = 0.000308032 Jy
! Component: 200  -  total flux cleaned = 0.000375424 Jy
! Total flux subtracted in 200 components = 0.000375424 Jy
! Clean residual min=-0.001743 max=0.001208 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.381581 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 108 components and 0.381581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062435Jy  sigma=0.460740
! Fit after  self-cal, rms=0.062434Jy  sigma=0.460734
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062434Jy  sigma=0.460734
! Fit after  self-cal, rms=0.062426Jy  sigma=0.460559
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=2.944 mas, bpa=-13.47 degrees
! Estimated noise=0.622355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000707435 Jy
! Component: 100  -  total flux cleaned = -0.000801255 Jy
! Component: 150  -  total flux cleaned = -0.000782007 Jy
! Component: 200  -  total flux cleaned = -0.000832187 Jy
! Total flux subtracted in 200 components = -0.000832187 Jy
! Clean residual min=-0.001513 max=0.001423 Jy/beam
! Clean residual mean=-0.000002 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.380749 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 116 components and 0.380749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062408Jy  sigma=0.460399
! Fit after  self-cal, rms=0.062406Jy  sigma=0.460383
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.25933e-06 Jy
! Component: 100  -  total flux cleaned = 9.93844e-06 Jy
! Component: 150  -  total flux cleaned = 1.01799e-05 Jy
! Component: 200  -  total flux cleaned = 3.13501e-05 Jy
! Total flux subtracted in 200 components = 3.13501e-05 Jy
! Clean residual min=-0.001459 max=0.001350 Jy/beam
! Clean residual mean=-0.000002 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.38078 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 127 components and 0.38078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062402Jy  sigma=0.460349
! Fit after  self-cal, rms=0.062401Jy  sigma=0.460346
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.607 mas, bpa=-17.47 degrees
! Estimated noise=0.524705 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 2.607 at -17.47 degrees (North through East)
! Clean map  min=-0.0014579  max=0.27998 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7684 mas, bmaj=2.392 mas, bpa=-18.51 degrees
! Estimated noise=1.02126 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207871 Jy
! Component: 100  -  total flux cleaned = 0.276822 Jy
! Component: 150  -  total flux cleaned = 0.314854 Jy
! Component: 200  -  total flux cleaned = 0.336755 Jy
! Total flux subtracted in 200 components = 0.336755 Jy
! Clean residual min=-0.004618 max=0.010934 Jy/beam
! Clean residual mean=-0.000008 rms=0.001199 Jy/beam
! Combined flux in latest and established models = 0.336755 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.336755 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.607 mas, bpa=-17.47 degrees
! Estimated noise=0.524705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172183 Jy
! Component: 100  -  total flux cleaned = 0.0265279 Jy
! Component: 150  -  total flux cleaned = 0.0320757 Jy
! Component: 200  -  total flux cleaned = 0.0357091 Jy
! Total flux subtracted in 200 components = 0.0357091 Jy
! Clean residual min=-0.001652 max=0.001960 Jy/beam
! Clean residual mean=-0.000004 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.372464 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 34 components and 0.372464 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246203 Jy
! Component: 100  -  total flux cleaned = 0.00426066 Jy
! Component: 150  -  total flux cleaned = 0.00495989 Jy
! Component: 200  -  total flux cleaned = 0.00541792 Jy
! Total flux subtracted in 200 components = 0.00541792 Jy
! Clean residual min=-0.001386 max=0.001476 Jy/beam
! Clean residual mean=-0.000002 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.377882 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 50 components and 0.377882 Jy
! Inverting map 
! Added new window around map position (-10.8, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00069858 Jy
! Component: 100  -  total flux cleaned = 0.000997444 Jy
! Component: 150  -  total flux cleaned = 0.00115175 Jy
! Component: 200  -  total flux cleaned = 0.0013985 Jy
! Total flux subtracted in 200 components = 0.0013985 Jy
! Clean residual min=-0.001273 max=0.001330 Jy/beam
! Clean residual mean=-0.000002 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.37928 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 69 components and 0.37928 Jy
! Inverting map 
! Added new window around map position (-8.6, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00037171 Jy
! Component: 100  -  total flux cleaned = 0.000441912 Jy
! Component: 150  -  total flux cleaned = 0.000411817 Jy
! Component: 200  -  total flux cleaned = 0.000527299 Jy
! Total flux subtracted in 200 components = 0.000527299 Jy
! Clean residual min=-0.001219 max=0.001200 Jy/beam
! Clean residual mean=-0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.379807 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 83 components and 0.379807 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=2.944 mas, bpa=-13.47 degrees
! Estimated noise=0.622355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018382 Jy
! Component: 100  -  total flux cleaned = 0.000338752 Jy
! Component: 150  -  total flux cleaned = 0.000378339 Jy
! Component: 200  -  total flux cleaned = 0.000396132 Jy
! Total flux subtracted in 200 components = 0.000396132 Jy
! Clean residual min=-0.001185 max=0.001191 Jy/beam
! Clean residual mean=-0.000003 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.380204 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.64132e-07 Jy
! Component: 100  -  total flux cleaned = -2.83832e-05 Jy
! Component: 150  -  total flux cleaned = -4.17344e-05 Jy
! Component: 200  -  total flux cleaned = -6.63924e-05 Jy
! Total flux subtracted in 200 components = -6.63924e-05 Jy
! Clean residual min=-0.001164 max=0.001218 Jy/beam
! Clean residual mean=-0.000002 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.380137 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 112 components and 0.380137 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.607 mas, bpa=-17.47 degrees
! Estimated noise=0.524705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000201122 Jy
! Component: 100  -  total flux cleaned = -0.000224871 Jy
! Component: 150  -  total flux cleaned = -0.000203008 Jy
! Component: 200  -  total flux cleaned = -0.00020245 Jy
! Total flux subtracted in 200 components = -0.00020245 Jy
! Clean residual min=-0.001201 max=0.001235 Jy/beam
! Clean residual mean=-0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.379935 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.379935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062349Jy  sigma=0.459882
! Fit after  self-cal, rms=0.062339Jy  sigma=0.459822
wmodel J0813+2542_X_map.mod
! Writing 123 model components to file: J0813+2542_X_map.mod
wobs   J0813+2542_X_uvs.fits
! Writing UV FITS file: J0813+2542_X_uvs.fits
wwins  J0813+2542_X_map.win
! wwins: Wrote 5 windows to J0813+2542_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001615 Jy
! Component: 100  -  total flux cleaned = -0.000413794 Jy
! Component: 150  -  total flux cleaned = -0.000668774 Jy
! Component: 200  -  total flux cleaned = -0.000860794 Jy
! Component: 250  -  total flux cleaned = -0.00106244 Jy
! Component: 300  -  total flux cleaned = -0.00125772 Jy
! Component: 350  -  total flux cleaned = -0.00141661 Jy
! Component: 400  -  total flux cleaned = -0.00155586 Jy
! Component: 450  -  total flux cleaned = -0.00169181 Jy
! Component: 500  -  total flux cleaned = -0.00175099 Jy
! Component: 550  -  total flux cleaned = -0.00183815 Jy
! Component: 600  -  total flux cleaned = -0.00196646 Jy
! Component: 650  -  total flux cleaned = -0.00205048 Jy
! Component: 700  -  total flux cleaned = -0.00209203 Jy
! Component: 750  -  total flux cleaned = -0.00220061 Jy
! Component: 800  -  total flux cleaned = -0.00224067 Jy
! Component: 850  -  total flux cleaned = -0.00228049 Jy
! Component: 900  -  total flux cleaned = -0.00233251 Jy
! Component: 950  -  total flux cleaned = -0.00239646 Jy
! Component: 1000  -  total flux cleaned = -0.00244698 Jy
! Component: 1050  -  total flux cleaned = -0.00250921 Jy
! Component: 1100  -  total flux cleaned = -0.00258305 Jy
! Component: 1150  -  total flux cleaned = -0.00266816 Jy
! Component: 1200  -  total flux cleaned = -0.00270425 Jy
! Component: 1250  -  total flux cleaned = -0.00278753 Jy
! Component: 1300  -  total flux cleaned = -0.00284615 Jy
! Component: 1350  -  total flux cleaned = -0.00286943 Jy
! Component: 1400  -  total flux cleaned = -0.00292707 Jy
! Component: 1450  -  total flux cleaned = -0.00300687 Jy
! Component: 1500  -  total flux cleaned = -0.00305194 Jy
! Component: 1550  -  total flux cleaned = -0.00308526 Jy
! Component: 1600  -  total flux cleaned = -0.00315122 Jy
! Component: 1650  -  total flux cleaned = -0.00311847 Jy
! Component: 1700  -  total flux cleaned = -0.00317242 Jy
! Component: 1750  -  total flux cleaned = -0.00312946 Jy
! Component: 1800  -  total flux cleaned = -0.00318268 Jy
! Component: 1850  -  total flux cleaned = -0.003172 Jy
! Component: 1900  -  total flux cleaned = -0.00321353 Jy
! Component: 1950  -  total flux cleaned = -0.00318265 Jy
! Component: 2000  -  total flux cleaned = -0.00322359 Jy
! Component: 2050  -  total flux cleaned = -0.00320321 Jy
! Component: 2100  -  total flux cleaned = -0.0031932 Jy
! Component: 2150  -  total flux cleaned = -0.0032531 Jy
! Component: 2200  -  total flux cleaned = -0.0032136 Jy
! Component: 2250  -  total flux cleaned = -0.00319398 Jy
! Component: 2300  -  total flux cleaned = -0.00319399 Jy
! Component: 2350  -  total flux cleaned = -0.00318445 Jy
! Component: 2400  -  total flux cleaned = -0.00320369 Jy
! Component: 2450  -  total flux cleaned = -0.00318451 Jy
! Component: 2500  -  total flux cleaned = -0.00316559 Jy
! Component: 2550  -  total flux cleaned = -0.00316563 Jy
! Component: 2600  -  total flux cleaned = -0.00313773 Jy
! Component: 2650  -  total flux cleaned = -0.00311002 Jy
! Component: 2700  -  total flux cleaned = -0.0031101 Jy
! Component: 2750  -  total flux cleaned = -0.00309185 Jy
! Component: 2800  -  total flux cleaned = -0.00308287 Jy
! Component: 2850  -  total flux cleaned = -0.00307397 Jy
! Component: 2900  -  total flux cleaned = -0.00306505 Jy
! Component: 2950  -  total flux cleaned = -0.00309161 Jy
! Component: 3000  -  total flux cleaned = -0.00308274 Jy
! Component: 3050  -  total flux cleaned = -0.0030479 Jy
! Component: 3100  -  total flux cleaned = -0.00303923 Jy
! Component: 3150  -  total flux cleaned = -0.00303055 Jy
! Component: 3200  -  total flux cleaned = -0.00301341 Jy
! Component: 3250  -  total flux cleaned = -0.00299643 Jy
! Component: 3300  -  total flux cleaned = -0.00297944 Jy
! Component: 3350  -  total flux cleaned = -0.00297949 Jy
! Component: 3400  -  total flux cleaned = -0.00295439 Jy
! Component: 3450  -  total flux cleaned = -0.0029295 Jy
! Component: 3500  -  total flux cleaned = -0.00288837 Jy
! Component: 3550  -  total flux cleaned = -0.00286388 Jy
! Component: 3600  -  total flux cleaned = -0.00285571 Jy
! Component: 3650  -  total flux cleaned = -0.00284755 Jy
! Component: 3700  -  total flux cleaned = -0.00281545 Jy
! Component: 3750  -  total flux cleaned = -0.00282352 Jy
! Component: 3800  -  total flux cleaned = -0.00281554 Jy
! Component: 3850  -  total flux cleaned = -0.00278392 Jy
! Component: 3900  -  total flux cleaned = -0.00275243 Jy
! Component: 3950  -  total flux cleaned = -0.00274459 Jy
! Component: 4000  -  total flux cleaned = -0.00273678 Jy
! Component: 4050  -  total flux cleaned = -0.00271355 Jy
! Total flux subtracted in 4096 components = -0.00268276 Jy
! Clean residual min=-0.000490 max=0.000415 Jy/beam
! Clean residual mean=-0.000001 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.377252 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 421 components and 0.377252 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0813+2542_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 2.607 at -17.47 degrees (North through East)
! Clean map  min=-0.00093553  max=0.28017 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0813+2542_X_map.fits
wmodel /image_prod/ug002_uva//J0813+2542_X_map.mod
! Writing 421 model components to file: /image_prod/ug002_uva//J0813+2542_X_map.mod
wobs   /image_prod/ug002_uva//J0813+2542_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0813+2542_X_uvs.fits
wwins  /image_prod/ug002_uva//J0813+2542_X_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0813+2542_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.280174 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00013564 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.145238 0.145238 0.290475 0.580951 1.1619 2.3238 4.64761 9.29521 18.5904 37.1809 74.3617
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.28 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2065.58 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0813+2542_X_dfm.log closed on Wed Mar  4 22:17:20 2020