! Started logfile: /image_prod/ug002_uva//J0813+2435_S_dfm.log on Wed Mar  4 22:17:00 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0813+2435_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0813+2435_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.977037 visibilities/baseline/integration-bin.
! Found source: J0813+2435
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7914 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0813+2435_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.059445Jy  sigma=8.586322
! Fit after  self-cal, rms=0.625994Jy  sigma=5.084814
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.177 mas, bmaj=10.13 mas, bpa=-18.69 degrees
! Estimated noise=1.43465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.290303 Jy
! Component: 100  -  total flux cleaned = 0.353619 Jy
! Total flux subtracted in 100 components = 0.353619 Jy
! Clean residual min=-0.011602 max=0.017747 Jy/beam
! Clean residual mean=-0.000011 rms=0.003025 Jy/beam
! Combined flux in latest and established models = 0.353619 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.353619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099560Jy  sigma=0.555094
! Fit after  self-cal, rms=0.099559Jy  sigma=0.555057
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.858 mas, bmaj=10.5 mas, bpa=-17.78 degrees
! Estimated noise=1.02611 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166635 Jy
! Component: 100  -  total flux cleaned = 0.0162681 Jy
! Component: 150  -  total flux cleaned = 0.0167944 Jy
! Component: 200  -  total flux cleaned = 0.0172186 Jy
! Total flux subtracted in 200 components = 0.0172186 Jy
! Clean residual min=-0.008943 max=0.009600 Jy/beam
! Clean residual mean=0.000003 rms=0.002118 Jy/beam
! Combined flux in latest and established models = 0.370837 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 27 components and 0.370837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094300Jy  sigma=0.525539
! Fit after  self-cal, rms=0.094297Jy  sigma=0.525512
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.858 x 10.5 at -17.78 degrees (North through East)
! Clean map  min=-0.010384  max=0.37532 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.02     KP        1.00     
!   LA        1.03     MK        1.03     NL        0.73     OV        1.00     
!   PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.05     KP        1.00     
!   LA        1.03     MK        1.02     NL        0.99     OV        0.98     
!   PT        1.00     
! 
! 
! Fit before self-cal, rms=0.094297Jy  sigma=0.525512
! Fit after  self-cal, rms=0.074918Jy  sigma=0.486480
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.892 mas, bmaj=10.53 mas, bpa=-17.79 degrees
! Estimated noise=1.02187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00139798 Jy
! Component: 100  -  total flux cleaned = -0.00125708 Jy
! Component: 150  -  total flux cleaned = -0.00108535 Jy
! Component: 200  -  total flux cleaned = -0.00083407 Jy
! Total flux subtracted in 200 components = -0.00083407 Jy
! Clean residual min=-0.007305 max=0.008266 Jy/beam
! Clean residual mean=-0.000001 rms=0.001750 Jy/beam
! Combined flux in latest and established models = 0.370003 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 43 components and 0.370003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074743Jy  sigma=0.485755
! Fit after  self-cal, rms=0.074720Jy  sigma=0.485700
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074720Jy  sigma=0.485700
! Fit after  self-cal, rms=0.063488Jy  sigma=0.416272
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.877 mas, bmaj=10.56 mas, bpa=-17.78 degrees
! Estimated noise=1.02249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00394227 Jy
! Component: 100  -  total flux cleaned = 0.00502243 Jy
! Component: 150  -  total flux cleaned = 0.00514915 Jy
! Component: 200  -  total flux cleaned = 0.0050975 Jy
! Total flux subtracted in 200 components = 0.0050975 Jy
! Clean residual min=-0.001986 max=0.002668 Jy/beam
! Clean residual mean=0.000002 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.375101 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 64 components and 0.375101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063175Jy  sigma=0.414116
! Fit after  self-cal, rms=0.063213Jy  sigma=0.414039
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19, 20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224738 Jy
! Component: 100  -  total flux cleaned = 0.00250374 Jy
! Component: 150  -  total flux cleaned = 0.00250457 Jy
! Component: 200  -  total flux cleaned = 0.00246063 Jy
! Total flux subtracted in 200 components = 0.00246063 Jy
! Clean residual min=-0.001786 max=0.002073 Jy/beam
! Clean residual mean=0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.377561 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 89 components and 0.377561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063058Jy  sigma=0.413093
! Fit after  self-cal, rms=0.063049Jy  sigma=0.413051
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063049Jy  sigma=0.413051
! Fit after  self-cal, rms=0.062804Jy  sigma=0.412319
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.872 mas, bmaj=10.54 mas, bpa=-17.81 degrees
! Estimated noise=1.02352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199314 Jy
! Component: 100  -  total flux cleaned = 0.00260482 Jy
! Component: 150  -  total flux cleaned = 0.00256534 Jy
! Component: 200  -  total flux cleaned = 0.00249779 Jy
! Total flux subtracted in 200 components = 0.00249779 Jy
! Clean residual min=-0.001543 max=0.001802 Jy/beam
! Clean residual mean=0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.380059 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 101 components and 0.380059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062708Jy  sigma=0.411678
! Fit after  self-cal, rms=0.062702Jy  sigma=0.411670
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.27751e-05 Jy
! Component: 100  -  total flux cleaned = -0.000137776 Jy
! Component: 150  -  total flux cleaned = -0.000221643 Jy
! Component: 200  -  total flux cleaned = -0.00027458 Jy
! Total flux subtracted in 200 components = -0.00027458 Jy
! Clean residual min=-0.001568 max=0.001773 Jy/beam
! Clean residual mean=0.000000 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.379784 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 112 components and 0.379784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062673Jy  sigma=0.411492
! Fit after  self-cal, rms=0.062671Jy  sigma=0.411488
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062671Jy  sigma=0.411488
! Fit after  self-cal, rms=0.062612Jy  sigma=0.411300
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.987 mas, bmaj=11.77 mas, bpa=-14.8 degrees
! Estimated noise=1.165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104349 Jy
! Component: 100  -  total flux cleaned = 0.00127041 Jy
! Component: 150  -  total flux cleaned = 0.00131553 Jy
! Component: 200  -  total flux cleaned = 0.00135426 Jy
! Total flux subtracted in 200 components = 0.00135426 Jy
! Clean residual min=-0.001761 max=0.001654 Jy/beam
! Clean residual mean=-0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.381139 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 133 components and 0.381139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062592Jy  sigma=0.411170
! Fit after  self-cal, rms=0.062589Jy  sigma=0.411164
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000135006 Jy
! Component: 100  -  total flux cleaned = -8.3076e-05 Jy
! Component: 150  -  total flux cleaned = -5.17245e-05 Jy
! Component: 200  -  total flux cleaned = -3.74288e-05 Jy
! Total flux subtracted in 200 components = -3.74288e-05 Jy
! Clean residual min=-0.001747 max=0.001612 Jy/beam
! Clean residual mean=-0.000000 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.381101 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 143 components and 0.381101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062585Jy  sigma=0.411145
! Fit after  self-cal, rms=0.062585Jy  sigma=0.411141
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.87 mas, bmaj=10.53 mas, bpa=-17.83 degrees
! Estimated noise=1.02441 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.87 x 10.53 at -17.83 degrees (North through East)
! Clean map  min=-0.0019671  max=0.37363 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.187 mas, bmaj=10.21 mas, bpa=-18.61 degrees
! Estimated noise=1.43438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.290246 Jy
! Component: 100  -  total flux cleaned = 0.35354 Jy
! Component: 150  -  total flux cleaned = 0.369147 Jy
! Component: 200  -  total flux cleaned = 0.37551 Jy
! Total flux subtracted in 200 components = 0.37551 Jy
! Clean residual min=-0.002723 max=0.003402 Jy/beam
! Clean residual mean=-0.000002 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.37551 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.37551 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.87 mas, bmaj=10.53 mas, bpa=-17.83 degrees
! Estimated noise=1.02441 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033855 Jy
! Component: 100  -  total flux cleaned = 0.00519006 Jy
! Component: 150  -  total flux cleaned = 0.00584364 Jy
! Component: 200  -  total flux cleaned = 0.00595361 Jy
! Total flux subtracted in 200 components = 0.00595361 Jy
! Clean residual min=-0.001980 max=0.001926 Jy/beam
! Clean residual mean=0.000001 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.381464 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 0.381464 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.987 mas, bmaj=11.77 mas, bpa=-14.8 degrees
! Estimated noise=1.165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000278463 Jy
! Component: 100  -  total flux cleaned = -0.000121913 Jy
! Component: 150  -  total flux cleaned = -0.000153969 Jy
! Component: 200  -  total flux cleaned = -9.36593e-05 Jy
! Total flux subtracted in 200 components = -9.36593e-05 Jy
! Clean residual min=-0.001997 max=0.001794 Jy/beam
! Clean residual mean=0.000000 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.38137 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.62419e-05 Jy
! Component: 100  -  total flux cleaned = 2.53911e-05 Jy
! Component: 150  -  total flux cleaned = 4.88549e-05 Jy
! Component: 200  -  total flux cleaned = 2.75681e-05 Jy
! Total flux subtracted in 200 components = 2.75681e-05 Jy
! Clean residual min=-0.001920 max=0.001739 Jy/beam
! Clean residual mean=0.000000 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.381398 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 83 components and 0.381398 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.87 mas, bmaj=10.53 mas, bpa=-17.83 degrees
! Estimated noise=1.02441 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.20762e-05 Jy
! Component: 100  -  total flux cleaned = 0.000168097 Jy
! Component: 150  -  total flux cleaned = 0.000230789 Jy
! Component: 200  -  total flux cleaned = 0.000230227 Jy
! Total flux subtracted in 200 components = 0.000230227 Jy
! Clean residual min=-0.001728 max=0.001794 Jy/beam
! Clean residual mean=0.000000 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.381628 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 111 components and 0.381628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062620Jy  sigma=0.411297
! Fit after  self-cal, rms=0.062619Jy  sigma=0.411287
wmodel J0813+2435_S_map.mod
! Writing 111 model components to file: J0813+2435_S_map.mod
wobs   J0813+2435_S_uvs.fits
! Writing UV FITS file: J0813+2435_S_uvs.fits
wwins  J0813+2435_S_map.win
! wwins: Wrote 2 windows to J0813+2435_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446156 Jy
! Component: 100  -  total flux cleaned = 0.000618589 Jy
! Component: 150  -  total flux cleaned = 0.000805801 Jy
! Component: 200  -  total flux cleaned = 0.000857056 Jy
! Component: 250  -  total flux cleaned = 0.000881208 Jy
! Component: 300  -  total flux cleaned = 0.000881268 Jy
! Component: 350  -  total flux cleaned = 0.000882007 Jy
! Component: 400  -  total flux cleaned = 0.000927223 Jy
! Component: 450  -  total flux cleaned = 0.000905066 Jy
! Component: 500  -  total flux cleaned = 0.00096949 Jy
! Component: 550  -  total flux cleaned = 0.000969921 Jy
! Component: 600  -  total flux cleaned = 0.00103223 Jy
! Component: 650  -  total flux cleaned = 0.00101143 Jy
! Component: 700  -  total flux cleaned = 0.00103134 Jy
! Component: 750  -  total flux cleaned = 0.00114902 Jy
! Component: 800  -  total flux cleaned = 0.00118772 Jy
! Component: 850  -  total flux cleaned = 0.00132055 Jy
! Component: 900  -  total flux cleaned = 0.00133921 Jy
! Component: 950  -  total flux cleaned = 0.00146816 Jy
! Component: 1000  -  total flux cleaned = 0.00154066 Jy
! Component: 1050  -  total flux cleaned = 0.00159393 Jy
! Component: 1100  -  total flux cleaned = 0.001629 Jy
! Component: 1150  -  total flux cleaned = 0.0016114 Jy
! Component: 1200  -  total flux cleaned = 0.00169702 Jy
! Component: 1250  -  total flux cleaned = 0.00171344 Jy
! Component: 1300  -  total flux cleaned = 0.00174655 Jy
! Component: 1350  -  total flux cleaned = 0.0017463 Jy
! Component: 1400  -  total flux cleaned = 0.00176234 Jy
! Component: 1450  -  total flux cleaned = 0.00181065 Jy
! Component: 1500  -  total flux cleaned = 0.00181034 Jy
! Component: 1550  -  total flux cleaned = 0.00190457 Jy
! Component: 1600  -  total flux cleaned = 0.00195117 Jy
! Component: 1650  -  total flux cleaned = 0.00201257 Jy
! Component: 1700  -  total flux cleaned = 0.00207332 Jy
! Component: 1750  -  total flux cleaned = 0.00210344 Jy
! Component: 1800  -  total flux cleaned = 0.00216287 Jy
! Component: 1850  -  total flux cleaned = 0.00219212 Jy
! Component: 1900  -  total flux cleaned = 0.00219198 Jy
! Component: 1950  -  total flux cleaned = 0.00220643 Jy
! Component: 2000  -  total flux cleaned = 0.00222075 Jy
! Component: 2050  -  total flux cleaned = 0.00227703 Jy
! Component: 2100  -  total flux cleaned = 0.00226317 Jy
! Component: 2150  -  total flux cleaned = 0.00234602 Jy
! Component: 2200  -  total flux cleaned = 0.00230504 Jy
! Component: 2250  -  total flux cleaned = 0.00237269 Jy
! Component: 2300  -  total flux cleaned = 0.00238603 Jy
! Component: 2350  -  total flux cleaned = 0.00243928 Jy
! Component: 2400  -  total flux cleaned = 0.00246556 Jy
! Component: 2450  -  total flux cleaned = 0.00247872 Jy
! Component: 2500  -  total flux cleaned = 0.00251748 Jy
! Component: 2550  -  total flux cleaned = 0.00253032 Jy
! Component: 2600  -  total flux cleaned = 0.00254295 Jy
! Component: 2650  -  total flux cleaned = 0.00256827 Jy
! Component: 2700  -  total flux cleaned = 0.00259333 Jy
! Component: 2750  -  total flux cleaned = 0.00261844 Jy
! Component: 2800  -  total flux cleaned = 0.00265536 Jy
! Component: 2850  -  total flux cleaned = 0.00270422 Jy
! Component: 2900  -  total flux cleaned = 0.00270422 Jy
! Component: 2950  -  total flux cleaned = 0.00275225 Jy
! Component: 3000  -  total flux cleaned = 0.00276423 Jy
! Component: 3050  -  total flux cleaned = 0.00283529 Jy
! Component: 3100  -  total flux cleaned = 0.00283527 Jy
! Component: 3150  -  total flux cleaned = 0.00288176 Jy
! Component: 3200  -  total flux cleaned = 0.00289328 Jy
! Component: 3250  -  total flux cleaned = 0.00291627 Jy
! Component: 3300  -  total flux cleaned = 0.0028936 Jy
! Component: 3350  -  total flux cleaned = 0.00296154 Jy
! Component: 3400  -  total flux cleaned = 0.00293899 Jy
! Component: 3450  -  total flux cleaned = 0.00293907 Jy
! Component: 3500  -  total flux cleaned = 0.00298328 Jy
! Component: 3550  -  total flux cleaned = 0.0029943 Jy
! Component: 3600  -  total flux cleaned = 0.00293972 Jy
! Component: 3650  -  total flux cleaned = 0.00293981 Jy
! Component: 3700  -  total flux cleaned = 0.00301524 Jy
! Component: 3750  -  total flux cleaned = 0.00300455 Jy
! Component: 3800  -  total flux cleaned = 0.00299378 Jy
! Component: 3850  -  total flux cleaned = 0.00300435 Jy
! Component: 3900  -  total flux cleaned = 0.00297284 Jy
! Component: 3950  -  total flux cleaned = 0.00299369 Jy
! Component: 4000  -  total flux cleaned = 0.00299369 Jy
! Component: 4050  -  total flux cleaned = 0.00302467 Jy
! Total flux subtracted in 4096 components = 0.00299386 Jy
! Clean residual min=-0.000607 max=0.000612 Jy/beam
! Clean residual mean=0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.384622 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 414 components and 0.384622 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0813+2435_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.87 x 10.53 at -17.83 degrees (North through East)
! Clean map  min=-0.0012224  max=0.37344 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0813+2435_S_map.fits
wmodel /image_prod/ug002_uva//J0813+2435_S_map.mod
! Writing 414 model components to file: /image_prod/ug002_uva//J0813+2435_S_map.mod
wobs   /image_prod/ug002_uva//J0813+2435_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0813+2435_S_uvs.fits
wwins  /image_prod/ug002_uva//J0813+2435_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0813+2435_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.373442 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000199952 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.160629 0.160629 0.321259 0.642518 1.28504 2.57007 5.14014 10.2803 20.5606 41.1211 82.2423
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.373 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1867.65 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0813+2435_S_dfm.log closed on Wed Mar  4 22:17:04 2020