! Started logfile: /image_prod/ug002_uva//J0809+5341_S_dfm.log on Wed Mar  4 22:15:31 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0809+5341_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0809+5341_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.967407 visibilities/baseline/integration-bin.
! Found source: J0809+5341
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5877 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0809+5341_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018199Jy  sigma=8.156854
! Fit after  self-cal, rms=0.824941Jy  sigma=6.615458
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.306 mas, bmaj=4.359 mas, bpa=-33.85 degrees
! Estimated noise=1.77783 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137669 Jy
! Component: 100  -  total flux cleaned = 0.167748 Jy
! Total flux subtracted in 100 components = 0.167748 Jy
! Clean residual min=-0.006742 max=0.011025 Jy/beam
! Clean residual mean=-0.000021 rms=0.001910 Jy/beam
! Combined flux in latest and established models = 0.167748 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.167748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078336Jy  sigma=0.521182
! Fit after  self-cal, rms=0.078252Jy  sigma=0.520769
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.027 mas, bmaj=5.228 mas, bpa=-33.58 degrees
! Estimated noise=1.18708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126121 Jy
! Component: 100  -  total flux cleaned = 0.0202478 Jy
! Component: 150  -  total flux cleaned = 0.0229518 Jy
! Component: 200  -  total flux cleaned = 0.0252255 Jy
! Total flux subtracted in 200 components = 0.0252255 Jy
! Clean residual min=-0.006549 max=0.008498 Jy/beam
! Clean residual mean=-0.000019 rms=0.001558 Jy/beam
! Combined flux in latest and established models = 0.192973 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 25 components and 0.192973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075844Jy  sigma=0.498075
! Fit after  self-cal, rms=0.075711Jy  sigma=0.496454
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.027 x 5.228 at -33.58 degrees (North through East)
! Clean map  min=-0.0060981  max=0.1727 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.97     KP        0.97     
!   LA        1.00     MK        0.99     NL        1.19     OV        0.97     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        0.97     KP        0.87     
!   LA        0.99     MK        1.00     NL        1.17     OV        0.97     
!   PT        0.99     SC        0.82     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.96     KP        0.95     
!   LA        0.99     MK        0.98     NL        1.26     OV        0.95     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.075711Jy  sigma=0.496454
! Fit after  self-cal, rms=0.074084Jy  sigma=0.478755
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.995 mas, bmaj=5.156 mas, bpa=-32.78 degrees
! Estimated noise=1.18215 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00060595 Jy
! Component: 100  -  total flux cleaned = 3.0198e-05 Jy
! Component: 150  -  total flux cleaned = -0.000448472 Jy
! Component: 200  -  total flux cleaned = -0.000613494 Jy
! Total flux subtracted in 200 components = -0.000613494 Jy
! Clean residual min=-0.005067 max=0.005354 Jy/beam
! Clean residual mean=-0.000032 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.19236 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 41 components and 0.19236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073671Jy  sigma=0.476905
! Fit after  self-cal, rms=0.073705Jy  sigma=0.476726
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073705Jy  sigma=0.476726
! Fit after  self-cal, rms=0.076968Jy  sigma=0.444710
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.026 mas, bmaj=5.072 mas, bpa=-32.9 degrees
! Estimated noise=1.18908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000349146 Jy
! Component: 100  -  total flux cleaned = -0.000355496 Jy
! Component: 150  -  total flux cleaned = -0.000356205 Jy
! Component: 200  -  total flux cleaned = -0.000302104 Jy
! Total flux subtracted in 200 components = -0.000302104 Jy
! Clean residual min=-0.002619 max=0.002557 Jy/beam
! Clean residual mean=-0.000010 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.192057 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 63 components and 0.192057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076825Jy  sigma=0.443726
! Fit after  self-cal, rms=0.076888Jy  sigma=0.443517
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.5, 116.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705941 Jy
! Component: 100  -  total flux cleaned = 0.000505347 Jy
! Component: 150  -  total flux cleaned = 0.000562478 Jy
! Component: 200  -  total flux cleaned = 0.000512085 Jy
! Total flux subtracted in 200 components = 0.000512085 Jy
! Clean residual min=-0.002515 max=0.002122 Jy/beam
! Clean residual mean=-0.000009 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.19257 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.192569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076741Jy  sigma=0.442572
! Fit after  self-cal, rms=0.076726Jy  sigma=0.442495
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076726Jy  sigma=0.442495
! Fit after  self-cal, rms=0.077328Jy  sigma=0.441244
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.027 mas, bmaj=5.061 mas, bpa=-32.92 degrees
! Estimated noise=1.18548 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000489448 Jy
! Component: 100  -  total flux cleaned = -0.000696642 Jy
! Component: 150  -  total flux cleaned = -0.000741866 Jy
! Component: 200  -  total flux cleaned = -0.000742092 Jy
! Total flux subtracted in 200 components = -0.000742092 Jy
! Clean residual min=-0.002259 max=0.002114 Jy/beam
! Clean residual mean=-0.000009 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.191827 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 93 components and 0.191827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077254Jy  sigma=0.440715
! Fit after  self-cal, rms=0.077248Jy  sigma=0.440682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202742 Jy
! Component: 100  -  total flux cleaned = -0.000241059 Jy
! Component: 150  -  total flux cleaned = -0.000203535 Jy
! Component: 200  -  total flux cleaned = -0.000203263 Jy
! Total flux subtracted in 200 components = -0.000203263 Jy
! Clean residual min=-0.002215 max=0.002103 Jy/beam
! Clean residual mean=-0.000009 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.191624 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 100 components and 0.191624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077206Jy  sigma=0.440390
! Fit after  self-cal, rms=0.077203Jy  sigma=0.440380
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077203Jy  sigma=0.440380
! Fit after  self-cal, rms=0.077675Jy  sigma=0.440303
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.668 mas, bmaj=8.946 mas, bpa=-81.8 degrees
! Estimated noise=1.40963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000345384 Jy
! Component: 100  -  total flux cleaned = -0.000273936 Jy
! Component: 150  -  total flux cleaned = -0.000328612 Jy
! Component: 200  -  total flux cleaned = -0.000375459 Jy
! Total flux subtracted in 200 components = -0.000375459 Jy
! Clean residual min=-0.002047 max=0.002190 Jy/beam
! Clean residual mean=-0.000020 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.191249 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 119 components and 0.191249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077651Jy  sigma=0.440183
! Fit after  self-cal, rms=0.077648Jy  sigma=0.440136
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.00631e-05 Jy
! Component: 100  -  total flux cleaned = -0.000163647 Jy
! Component: 150  -  total flux cleaned = -0.000224172 Jy
! Component: 200  -  total flux cleaned = -0.000242382 Jy
! Total flux subtracted in 200 components = -0.000242382 Jy
! Clean residual min=-0.002023 max=0.002157 Jy/beam
! Clean residual mean=-0.000020 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.191006 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 132 components and 0.191006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077637Jy  sigma=0.440086
! Fit after  self-cal, rms=0.077636Jy  sigma=0.440068
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.031 mas, bmaj=5.049 mas, bpa=-32.87 degrees
! Estimated noise=1.18343 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.031 x 5.049 at -32.87 degrees (North through East)
! Clean map  min=-0.0019585  max=0.17283 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.308 mas, bmaj=4.212 mas, bpa=-33.16 degrees
! Estimated noise=1.76624 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136768 Jy
! Component: 100  -  total flux cleaned = 0.166671 Jy
! Component: 150  -  total flux cleaned = 0.175099 Jy
! Component: 200  -  total flux cleaned = 0.179784 Jy
! Total flux subtracted in 200 components = 0.179784 Jy
! Clean residual min=-0.003132 max=0.003203 Jy/beam
! Clean residual mean=-0.000010 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.179784 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.179784 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.031 mas, bmaj=5.049 mas, bpa=-32.87 degrees
! Estimated noise=1.18343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00439388 Jy
! Component: 100  -  total flux cleaned = 0.00690633 Jy
! Component: 150  -  total flux cleaned = 0.00779754 Jy
! Component: 200  -  total flux cleaned = 0.00836164 Jy
! Total flux subtracted in 200 components = 0.00836164 Jy
! Clean residual min=-0.002067 max=0.002316 Jy/beam
! Clean residual mean=-0.000012 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.188145 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.188145 Jy
! Inverting map 
! Added new window around map position (97.5, -72).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162616 Jy
! Component: 100  -  total flux cleaned = 0.00194487 Jy
! Component: 150  -  total flux cleaned = 0.0021398 Jy
! Component: 200  -  total flux cleaned = 0.0023215 Jy
! Total flux subtracted in 200 components = 0.0023215 Jy
! Clean residual min=-0.001909 max=0.002158 Jy/beam
! Clean residual mean=-0.000015 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.190467 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 61 components and 0.190467 Jy
! Inverting map 
! Added new window around map position (111, 106).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108269 Jy
! Component: 100  -  total flux cleaned = 0.00112408 Jy
! Component: 150  -  total flux cleaned = 0.00120583 Jy
! Component: 200  -  total flux cleaned = 0.00132324 Jy
! Total flux subtracted in 200 components = 0.00132324 Jy
! Clean residual min=-0.001802 max=0.001977 Jy/beam
! Clean residual mean=-0.000017 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.19179 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 77 components and 0.19179 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.668 mas, bmaj=8.946 mas, bpa=-81.8 degrees
! Estimated noise=1.40963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011804 Jy
! Component: 100  -  total flux cleaned = 0.00151407 Jy
! Component: 150  -  total flux cleaned = 0.00165844 Jy
! Component: 200  -  total flux cleaned = 0.00173553 Jy
! Total flux subtracted in 200 components = 0.00173553 Jy
! Clean residual min=-0.001850 max=0.001912 Jy/beam
! Clean residual mean=-0.000033 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.193526 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.31103e-05 Jy
! Component: 100  -  total flux cleaned = 4.47174e-05 Jy
! Component: 150  -  total flux cleaned = 4.45163e-05 Jy
! Component: 200  -  total flux cleaned = 6.48201e-05 Jy
! Total flux subtracted in 200 components = 6.48201e-05 Jy
! Clean residual min=-0.001849 max=0.001903 Jy/beam
! Clean residual mean=-0.000033 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.19359 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 111 components and 0.19359 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.031 mas, bmaj=5.049 mas, bpa=-32.87 degrees
! Estimated noise=1.18343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226098 Jy
! Component: 100  -  total flux cleaned = -0.000322039 Jy
! Component: 150  -  total flux cleaned = -0.000322279 Jy
! Component: 200  -  total flux cleaned = -0.000322934 Jy
! Total flux subtracted in 200 components = -0.000322934 Jy
! Clean residual min=-0.001795 max=0.001956 Jy/beam
! Clean residual mean=-0.000015 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.193267 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 124 components and 0.193267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077533Jy  sigma=0.439175
! Fit after  self-cal, rms=0.077516Jy  sigma=0.439069
wmodel J0809+5341_S_map.mod
! Writing 124 model components to file: J0809+5341_S_map.mod
wobs   J0809+5341_S_uvs.fits
! Writing UV FITS file: J0809+5341_S_uvs.fits
wwins  J0809+5341_S_map.win
! wwins: Wrote 5 windows to J0809+5341_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115476 Jy
! Component: 100  -  total flux cleaned = 0.000211313 Jy
! Component: 150  -  total flux cleaned = 0.000302677 Jy
! Component: 200  -  total flux cleaned = 0.000390762 Jy
! Component: 250  -  total flux cleaned = 0.000476595 Jy
! Component: 300  -  total flux cleaned = 0.000615957 Jy
! Component: 350  -  total flux cleaned = 0.000751566 Jy
! Component: 400  -  total flux cleaned = 0.000937063 Jy
! Component: 450  -  total flux cleaned = 0.00109289 Jy
! Component: 500  -  total flux cleaned = 0.00127066 Jy
! Component: 550  -  total flux cleaned = 0.00139522 Jy
! Component: 600  -  total flux cleaned = 0.00156558 Jy
! Component: 650  -  total flux cleaned = 0.00168489 Jy
! Component: 700  -  total flux cleaned = 0.00180198 Jy
! Component: 750  -  total flux cleaned = 0.00187121 Jy
! Component: 800  -  total flux cleaned = 0.00189409 Jy
! Component: 850  -  total flux cleaned = 0.00191718 Jy
! Component: 900  -  total flux cleaned = 0.00200635 Jy
! Component: 950  -  total flux cleaned = 0.00202827 Jy
! Component: 1000  -  total flux cleaned = 0.00207143 Jy
! Component: 1050  -  total flux cleaned = 0.00205038 Jy
! Component: 1100  -  total flux cleaned = 0.00213488 Jy
! Component: 1150  -  total flux cleaned = 0.00213497 Jy
! Component: 1200  -  total flux cleaned = 0.00217631 Jy
! Component: 1250  -  total flux cleaned = 0.00219626 Jy
! Component: 1300  -  total flux cleaned = 0.00211544 Jy
! Component: 1350  -  total flux cleaned = 0.00213565 Jy
! Component: 1400  -  total flux cleaned = 0.00213559 Jy
! Component: 1450  -  total flux cleaned = 0.00209623 Jy
! Component: 1500  -  total flux cleaned = 0.00203807 Jy
! Component: 1550  -  total flux cleaned = 0.00199974 Jy
! Component: 1600  -  total flux cleaned = 0.00203804 Jy
! Component: 1650  -  total flux cleaned = 0.00209426 Jy
! Component: 1700  -  total flux cleaned = 0.00209408 Jy
! Component: 1750  -  total flux cleaned = 0.00209391 Jy
! Component: 1800  -  total flux cleaned = 0.00213051 Jy
! Component: 1850  -  total flux cleaned = 0.00209392 Jy
! Component: 1900  -  total flux cleaned = 0.00209375 Jy
! Component: 1950  -  total flux cleaned = 0.00209368 Jy
! Component: 2000  -  total flux cleaned = 0.0020937 Jy
! Component: 2050  -  total flux cleaned = 0.00212872 Jy
! Component: 2100  -  total flux cleaned = 0.00214594 Jy
! Component: 2150  -  total flux cleaned = 0.00218057 Jy
! Component: 2200  -  total flux cleaned = 0.00218036 Jy
! Component: 2250  -  total flux cleaned = 0.00214615 Jy
! Component: 2300  -  total flux cleaned = 0.00214619 Jy
! Component: 2350  -  total flux cleaned = 0.00214625 Jy
! Component: 2400  -  total flux cleaned = 0.00214623 Jy
! Component: 2450  -  total flux cleaned = 0.00217932 Jy
! Component: 2500  -  total flux cleaned = 0.00209705 Jy
! Component: 2550  -  total flux cleaned = 0.00216243 Jy
! Component: 2600  -  total flux cleaned = 0.00211377 Jy
! Component: 2650  -  total flux cleaned = 0.00213001 Jy
! Component: 2700  -  total flux cleaned = 0.00213007 Jy
! Component: 2750  -  total flux cleaned = 0.00209836 Jy
! Component: 2800  -  total flux cleaned = 0.00216155 Jy
! Component: 2850  -  total flux cleaned = 0.00211448 Jy
! Component: 2900  -  total flux cleaned = 0.00216119 Jy
! Component: 2950  -  total flux cleaned = 0.0021147 Jy
! Component: 3000  -  total flux cleaned = 0.00214546 Jy
! Component: 3050  -  total flux cleaned = 0.00216082 Jy
! Component: 3100  -  total flux cleaned = 0.00216076 Jy
! Component: 3150  -  total flux cleaned = 0.00219097 Jy
! Component: 3200  -  total flux cleaned = 0.00220589 Jy
! Component: 3250  -  total flux cleaned = 0.00219081 Jy
! Component: 3300  -  total flux cleaned = 0.00219084 Jy
! Component: 3350  -  total flux cleaned = 0.00222036 Jy
! Component: 3400  -  total flux cleaned = 0.0021615 Jy
! Component: 3450  -  total flux cleaned = 0.00210314 Jy
! Component: 3500  -  total flux cleaned = 0.00210335 Jy
! Component: 3550  -  total flux cleaned = 0.00213233 Jy
! Component: 3600  -  total flux cleaned = 0.00214666 Jy
! Component: 3650  -  total flux cleaned = 0.00211805 Jy
! Component: 3700  -  total flux cleaned = 0.00214639 Jy
! Component: 3750  -  total flux cleaned = 0.00208997 Jy
! Component: 3800  -  total flux cleaned = 0.00207604 Jy
! Component: 3850  -  total flux cleaned = 0.00214577 Jy
! Component: 3900  -  total flux cleaned = 0.00211792 Jy
! Component: 3950  -  total flux cleaned = 0.00207645 Jy
! Component: 4000  -  total flux cleaned = 0.00207648 Jy
! Component: 4050  -  total flux cleaned = 0.00209011 Jy
! Total flux subtracted in 4096 components = 0.00207647 Jy
! Clean residual min=-0.000883 max=0.000783 Jy/beam
! Clean residual mean=-0.000010 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.195344 Jy
keep
! Adding 299 model components to the UV plane model.
! The established model now contains 423 components and 0.195344 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0809+5341_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.031 x 5.049 at -32.87 degrees (North through East)
! Clean map  min=-0.001611  max=0.17463 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0809+5341_S_map.fits
wmodel /image_prod/ug002_uva//J0809+5341_S_map.mod
! Writing 423 model components to file: /image_prod/ug002_uva//J0809+5341_S_map.mod
wobs   /image_prod/ug002_uva//J0809+5341_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0809+5341_S_uvs.fits
wwins  /image_prod/ug002_uva//J0809+5341_S_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0809+5341_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.174627 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00024683 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.424041 0.424041 0.848082 1.69616 3.39233 6.78465 13.5693 27.1386 54.2772
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  707.479 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0809+5341_S_dfm.log closed on Wed Mar  4 22:15:35 2020