! Started logfile: /image_prod/ug002_uva//J0808+4052_X_dfm.log on Wed Mar 4 22:14:54 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0808+4052_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0808+4052_X_uva.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.854167 visibilities/baseline/integration-bin. ! Found source: J0808+4052 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 4428 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0808+4052_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.625187Jy sigma=8.614597 ! Fit after self-cal, rms=0.310763Jy sigma=1.590278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6878 mas, bmaj=1.267 mas, bpa=-11.83 degrees ! Estimated noise=2.8761 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.975162 Jy ! Component: 100 - total flux cleaned = 1.19054 Jy ! Total flux subtracted in 100 components = 1.19054 Jy ! Clean residual min=-0.030332 max=0.071519 Jy/beam ! Clean residual mean=-0.000014 rms=0.007414 Jy/beam ! Combined flux in latest and established models = 1.19054 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.19054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158396Jy sigma=0.788765 ! Fit after self-cal, rms=0.158389Jy sigma=0.788708 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0733039 Jy ! Component: 100 - total flux cleaned = 0.110987 Jy ! Total flux subtracted in 100 components = 0.110987 Jy ! Clean residual min=-0.027364 max=0.022943 Jy/beam ! Clean residual mean=-0.000011 rms=0.005004 Jy/beam ! Combined flux in latest and established models = 1.30153 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 1.30153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110221Jy sigma=0.552083 ! Fit after self-cal, rms=0.110206Jy sigma=0.551999 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8588 mas, bmaj=1.528 mas, bpa=-10.37 degrees ! Estimated noise=2.09865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252346 Jy ! Component: 100 - total flux cleaned = 0.0393255 Jy ! Component: 150 - total flux cleaned = 0.0477146 Jy ! Component: 200 - total flux cleaned = 0.0527484 Jy ! Total flux subtracted in 200 components = 0.0527484 Jy ! Clean residual min=-0.027959 max=0.022684 Jy/beam ! Clean residual mean=-0.000018 rms=0.005375 Jy/beam ! Combined flux in latest and established models = 1.35428 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 1.35428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102942Jy sigma=0.525518 ! Fit after self-cal, rms=0.102921Jy sigma=0.525343 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8588 x 1.528 at -10.37 degrees (North through East) ! Clean map min=-0.02661 max=1.269 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.00 KP 1.06 ! LA 1.06 MK 0.99 OV 0.93 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.02 KP 1.06 ! LA 1.05 MK 0.97 OV 0.93 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.01 KP 1.04 ! LA 1.06 MK 0.99 OV 0.93 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.98 KP 1.05 ! LA 1.05 MK 1.01 OV 0.94 PT 0.92 ! SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.99 KP 1.05 ! LA 1.06 MK 1.00 OV 0.95 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.00 KP 1.05 ! LA 1.04 MK 1.01 OV 0.93 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 1.03 ! LA 1.07 MK 1.01 OV 0.92 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.98 KP 1.05 ! LA 1.05 MK 1.03 OV 0.93 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.99 KP 1.03 ! LA 1.05 MK 1.01 OV 0.92 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.00 KP 1.05 ! LA 1.04 MK 1.01 OV 0.92 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.99 KP 1.04 ! LA 1.03 MK 1.06 OV 0.93 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.01 KP 1.06 ! LA 1.03 MK 1.06 OV 0.92 PT 0.90 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.102921Jy sigma=0.525343 ! Fit after self-cal, rms=0.061580Jy sigma=0.315651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.862 mas, bmaj=1.533 mas, bpa=-10.38 degrees ! Estimated noise=2.09889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.4, -20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823581 Jy ! Component: 100 - total flux cleaned = 0.0100706 Jy ! Component: 150 - total flux cleaned = 0.0105955 Jy ! Component: 200 - total flux cleaned = 0.0110355 Jy ! Total flux subtracted in 200 components = 0.0110355 Jy ! Clean residual min=-0.007848 max=0.007892 Jy/beam ! Clean residual mean=0.000003 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 1.36531 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 1.36531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059963Jy sigma=0.306791 ! Fit after self-cal, rms=0.059860Jy sigma=0.306123 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059860Jy sigma=0.306123 ! Fit after self-cal, rms=0.055922Jy sigma=0.283853 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8617 mas, bmaj=1.53 mas, bpa=-10.39 degrees ! Estimated noise=2.09936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00370713 Jy ! Component: 100 - total flux cleaned = -0.00560591 Jy ! Component: 150 - total flux cleaned = -0.00627008 Jy ! Component: 200 - total flux cleaned = -0.00683009 Jy ! Total flux subtracted in 200 components = -0.00683009 Jy ! Clean residual min=-0.003401 max=0.004456 Jy/beam ! Clean residual mean=-0.000008 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 1.35848 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 1.35848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055566Jy sigma=0.282157 ! Fit after self-cal, rms=0.055562Jy sigma=0.282083 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430687 Jy ! Component: 100 - total flux cleaned = 0.00556972 Jy ! Component: 150 - total flux cleaned = 0.00579333 Jy ! Component: 200 - total flux cleaned = 0.00591756 Jy ! Total flux subtracted in 200 components = 0.00591756 Jy ! Clean residual min=-0.003153 max=0.003494 Jy/beam ! Clean residual mean=-0.000007 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 1.3644 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 1.3644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055179Jy sigma=0.280186 ! Fit after self-cal, rms=0.055150Jy sigma=0.280069 ! Inverting map ! Added new window around map position (3, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025212 Jy ! Component: 100 - total flux cleaned = 0.00296337 Jy ! Component: 150 - total flux cleaned = 0.00308713 Jy ! Component: 200 - total flux cleaned = 0.0032007 Jy ! Total flux subtracted in 200 components = 0.0032007 Jy ! Clean residual min=-0.002698 max=0.002849 Jy/beam ! Clean residual mean=-0.000005 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 1.3676 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 1.3676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054932Jy sigma=0.279011 ! Fit after self-cal, rms=0.054924Jy sigma=0.278969 ! Inverting map ! Added new window around map position (-4.2, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235946 Jy ! Component: 100 - total flux cleaned = 0.00255254 Jy ! Component: 150 - total flux cleaned = 0.00288133 Jy ! Component: 200 - total flux cleaned = 0.00319023 Jy ! Total flux subtracted in 200 components = 0.00319023 Jy ! Clean residual min=-0.002728 max=0.002650 Jy/beam ! Clean residual mean=-0.000004 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 1.37079 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 1.37079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054773Jy sigma=0.278159 ! Fit after self-cal, rms=0.054771Jy sigma=0.278127 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054771Jy sigma=0.278127 ! Fit after self-cal, rms=0.054703Jy sigma=0.277745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8617 mas, bmaj=1.53 mas, bpa=-10.36 degrees ! Estimated noise=2.09941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021974 Jy ! Component: 100 - total flux cleaned = -0.000164771 Jy ! Component: 150 - total flux cleaned = 3.71318e-05 Jy ! Component: 200 - total flux cleaned = 0.000176095 Jy ! Total flux subtracted in 200 components = 0.000176095 Jy ! Clean residual min=-0.002681 max=0.002630 Jy/beam ! Clean residual mean=-0.000003 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 1.37097 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 114 components and 1.37097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054609Jy sigma=0.277273 ! Fit after self-cal, rms=0.054611Jy sigma=0.277259 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128884 Jy ! Component: 100 - total flux cleaned = 0.000257478 Jy ! Component: 150 - total flux cleaned = 0.000380941 Jy ! Component: 200 - total flux cleaned = 0.000500149 Jy ! Total flux subtracted in 200 components = 0.000500149 Jy ! Clean residual min=-0.002630 max=0.002581 Jy/beam ! Clean residual mean=-0.000003 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 1.37147 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 124 components and 1.37147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054554Jy sigma=0.276967 ! Fit after self-cal, rms=0.054556Jy sigma=0.276961 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054556Jy sigma=0.276961 ! Fit after self-cal, rms=0.054552Jy sigma=0.276920 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=2.552 mas, bpa=-7.859 degrees ! Estimated noise=2.90512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013407 Jy ! Component: 100 - total flux cleaned = -0.00126816 Jy ! Component: 150 - total flux cleaned = -0.00112574 Jy ! Component: 200 - total flux cleaned = -0.000999441 Jy ! Total flux subtracted in 200 components = -0.000999441 Jy ! Clean residual min=-0.002465 max=0.002685 Jy/beam ! Clean residual mean=-0.000005 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 1.37047 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 141 components and 1.37047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054522Jy sigma=0.276827 ! Fit after self-cal, rms=0.054524Jy sigma=0.276805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.78894e-07 Jy ! Component: 100 - total flux cleaned = 0.000120747 Jy ! Component: 150 - total flux cleaned = 0.000148466 Jy ! Component: 200 - total flux cleaned = 0.000147995 Jy ! Total flux subtracted in 200 components = 0.000147995 Jy ! Clean residual min=-0.002462 max=0.002697 Jy/beam ! Clean residual mean=-0.000003 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 1.37062 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 148 components and 1.37062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054516Jy sigma=0.276792 ! Fit after self-cal, rms=0.054518Jy sigma=0.276774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8617 mas, bmaj=1.53 mas, bpa=-10.35 degrees ! Estimated noise=2.09946 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8617 x 1.53 at -10.35 degrees (North through East) ! Clean map min=-0.003205 max=1.2689 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054518Jy sigma=0.276774 ! Fit after self-cal, rms=0.051079Jy sigma=0.255386 ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=1.53 mas, bpa=-10.36 degrees ! Estimated noise=2.09925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.16542e-05 Jy ! Component: 100 - total flux cleaned = -4.10519e-05 Jy ! Component: 150 - total flux cleaned = -4.14671e-05 Jy ! Component: 200 - total flux cleaned = -6.43904e-06 Jy ! Total flux subtracted in 200 components = -6.43904e-06 Jy ! Clean residual min=-0.002599 max=0.002567 Jy/beam ! Clean residual mean=-0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 1.37061 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 159 components and 1.37061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051023Jy sigma=0.255132 ! Fit after self-cal, rms=0.051025Jy sigma=0.255124 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.18291e-05 Jy ! Component: 100 - total flux cleaned = 9.77269e-05 Jy ! Component: 150 - total flux cleaned = 9.71477e-05 Jy ! Component: 200 - total flux cleaned = 0.000158407 Jy ! Total flux subtracted in 200 components = 0.000158407 Jy ! Clean residual min=-0.002549 max=0.002511 Jy/beam ! Clean residual mean=-0.000001 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 1.37077 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 170 components and 1.37077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050986Jy sigma=0.254937 ! Fit after self-cal, rms=0.050988Jy sigma=0.254932 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050988Jy sigma=0.254932 ! Fit after self-cal, rms=0.050990Jy sigma=0.254912 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6905 mas, bmaj=1.268 mas, bpa=-11.76 degrees ! Estimated noise=2.87755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.975632 Jy ! Component: 100 - total flux cleaned = 1.19013 Jy ! Component: 150 - total flux cleaned = 1.26018 Jy ! Component: 200 - total flux cleaned = 1.29577 Jy ! Total flux subtracted in 200 components = 1.29577 Jy ! Clean residual min=-0.009015 max=0.018052 Jy/beam ! Clean residual mean=-0.000003 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 1.29577 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.29577 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8617 mas, bmaj=1.53 mas, bpa=-10.35 degrees ! Estimated noise=2.09946 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256173 Jy ! Component: 100 - total flux cleaned = 0.0391718 Jy ! Component: 150 - total flux cleaned = 0.0477234 Jy ! Component: 200 - total flux cleaned = 0.0539591 Jy ! Total flux subtracted in 200 components = 0.0539591 Jy ! Clean residual min=-0.003501 max=0.004716 Jy/beam ! Clean residual mean=-0.000006 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 1.34973 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 1.34973 Jy ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508607 Jy ! Component: 100 - total flux cleaned = 0.00868427 Jy ! Component: 150 - total flux cleaned = 0.0109214 Jy ! Component: 200 - total flux cleaned = 0.0127517 Jy ! Total flux subtracted in 200 components = 0.0127517 Jy ! Clean residual min=-0.002818 max=0.003158 Jy/beam ! Clean residual mean=-0.000003 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 1.36248 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 48 components and 1.36248 Jy ! Inverting map ! Added new window around map position (5.6, 43.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259404 Jy ! Component: 100 - total flux cleaned = 0.00399493 Jy ! Component: 150 - total flux cleaned = 0.00476678 Jy ! Component: 200 - total flux cleaned = 0.00524473 Jy ! Total flux subtracted in 200 components = 0.00524473 Jy ! Clean residual min=-0.002567 max=0.002679 Jy/beam ! Clean residual mean=-0.000003 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 1.36772 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 1.36772 Jy ! Inverting map ! Added new window around map position (-8.2, 50.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177511 Jy ! Component: 100 - total flux cleaned = 0.0022905 Jy ! Component: 150 - total flux cleaned = 0.00263641 Jy ! Component: 200 - total flux cleaned = 0.00289691 Jy ! Total flux subtracted in 200 components = 0.00289691 Jy ! Clean residual min=-0.002367 max=0.002514 Jy/beam ! Clean residual mean=-0.000002 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 1.37062 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 78 components and 1.37062 Jy ! Inverting map ! Added new window around map position (1.8, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830117 Jy ! Component: 100 - total flux cleaned = 0.00103019 Jy ! Component: 150 - total flux cleaned = 0.00133471 Jy ! Component: 200 - total flux cleaned = 0.00150491 Jy ! Total flux subtracted in 200 components = 0.00150491 Jy ! Clean residual min=-0.002228 max=0.002202 Jy/beam ! Clean residual mean=-0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 1.37212 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 92 components and 1.37212 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.237 mas, bmaj=2.552 mas, bpa=-7.773 degrees ! Estimated noise=2.9048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160751 Jy ! Component: 100 - total flux cleaned = -0.000329705 Jy ! Component: 150 - total flux cleaned = -0.000329631 Jy ! Component: 200 - total flux cleaned = -0.000295844 Jy ! Total flux subtracted in 200 components = -0.000295844 Jy ! Clean residual min=-0.001953 max=0.002115 Jy/beam ! Clean residual mean=-0.000004 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 1.37183 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.10507e-05 Jy ! Component: 100 - total flux cleaned = -8.97545e-05 Jy ! Component: 150 - total flux cleaned = -0.000116735 Jy ! Component: 200 - total flux cleaned = -0.000142911 Jy ! Total flux subtracted in 200 components = -0.000142911 Jy ! Clean residual min=-0.001920 max=0.002079 Jy/beam ! Clean residual mean=-0.000004 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 1.37169 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 122 components and 1.37169 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8617 mas, bmaj=1.53 mas, bpa=-10.35 degrees ! Estimated noise=2.09946 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253775 Jy ! Component: 100 - total flux cleaned = 0.000304193 Jy ! Component: 150 - total flux cleaned = 0.000493648 Jy ! Component: 200 - total flux cleaned = 0.000628241 Jy ! Total flux subtracted in 200 components = 0.000628241 Jy ! Clean residual min=-0.002183 max=0.002077 Jy/beam ! Clean residual mean=-0.000001 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 1.37231 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 131 components and 1.37231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050878Jy sigma=0.254746 ! Fit after self-cal, rms=0.050830Jy sigma=0.254506 wmodel J0808+4052_X_map.mod ! Writing 131 model components to file: J0808+4052_X_map.mod wobs J0808+4052_X_uvs.fits ! Writing UV FITS file: J0808+4052_X_uvs.fits wwins J0808+4052_X_map.win ! wwins: Wrote 9 windows to J0808+4052_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.68585e-05 Jy ! Component: 100 - total flux cleaned = -0.000128633 Jy ! Component: 150 - total flux cleaned = -0.000163676 Jy ! Component: 200 - total flux cleaned = -0.000230146 Jy ! Component: 250 - total flux cleaned = -0.00035983 Jy ! Component: 300 - total flux cleaned = -0.000423403 Jy ! Component: 350 - total flux cleaned = -0.000609318 Jy ! Component: 400 - total flux cleaned = -0.000700364 Jy ! Component: 450 - total flux cleaned = -0.000789218 Jy ! Component: 500 - total flux cleaned = -0.000818439 Jy ! Component: 550 - total flux cleaned = -0.000903919 Jy ! Component: 600 - total flux cleaned = -0.000904057 Jy ! Component: 650 - total flux cleaned = -0.000904365 Jy ! Component: 700 - total flux cleaned = -0.000904387 Jy ! Component: 750 - total flux cleaned = -0.000877163 Jy ! Component: 800 - total flux cleaned = -0.00085052 Jy ! Component: 850 - total flux cleaned = -0.000875757 Jy ! Component: 900 - total flux cleaned = -0.000798608 Jy ! Component: 950 - total flux cleaned = -0.000723554 Jy ! Component: 1000 - total flux cleaned = -0.000748392 Jy ! Component: 1050 - total flux cleaned = -0.0006997 Jy ! Component: 1100 - total flux cleaned = -0.000819874 Jy ! Component: 1150 - total flux cleaned = -0.000772115 Jy ! Component: 1200 - total flux cleaned = -0.000866082 Jy ! Component: 1250 - total flux cleaned = -0.000935707 Jy ! Component: 1300 - total flux cleaned = -0.000958652 Jy ! Component: 1350 - total flux cleaned = -0.001004 Jy ! Component: 1400 - total flux cleaned = -0.00107094 Jy ! Component: 1450 - total flux cleaned = -0.00111508 Jy ! Component: 1500 - total flux cleaned = -0.00113677 Jy ! Component: 1550 - total flux cleaned = -0.00122305 Jy ! Component: 1600 - total flux cleaned = -0.00126569 Jy ! Component: 1650 - total flux cleaned = -0.00130776 Jy ! Component: 1700 - total flux cleaned = -0.00137014 Jy ! Component: 1750 - total flux cleaned = -0.00141139 Jy ! Component: 1800 - total flux cleaned = -0.00147304 Jy ! Component: 1850 - total flux cleaned = -0.00157463 Jy ! Component: 1900 - total flux cleaned = -0.00171496 Jy ! Component: 1950 - total flux cleaned = -0.00177454 Jy ! Component: 2000 - total flux cleaned = -0.00189245 Jy ! Component: 2050 - total flux cleaned = -0.00193147 Jy ! Component: 2100 - total flux cleaned = -0.00204715 Jy ! Component: 2150 - total flux cleaned = -0.00206652 Jy ! Component: 2200 - total flux cleaned = -0.0022178 Jy ! Component: 2250 - total flux cleaned = -0.0022366 Jy ! Component: 2300 - total flux cleaned = -0.00236677 Jy ! Component: 2350 - total flux cleaned = -0.0024955 Jy ! Component: 2400 - total flux cleaned = -0.00256841 Jy ! Component: 2450 - total flux cleaned = -0.0026226 Jy ! Component: 2500 - total flux cleaned = -0.00271233 Jy ! Component: 2550 - total flux cleaned = -0.0028193 Jy ! Component: 2600 - total flux cleaned = -0.00288997 Jy ! Component: 2650 - total flux cleaned = -0.00294277 Jy ! Component: 2700 - total flux cleaned = -0.00306486 Jy ! Component: 2750 - total flux cleaned = -0.00308218 Jy ! Component: 2800 - total flux cleaned = -0.00323675 Jy ! Component: 2850 - total flux cleaned = -0.00332204 Jy ! Component: 2900 - total flux cleaned = -0.00342346 Jy ! Component: 2950 - total flux cleaned = -0.00350744 Jy ! Component: 3000 - total flux cleaned = -0.00357405 Jy ! Component: 3050 - total flux cleaned = -0.0036403 Jy ! Component: 3100 - total flux cleaned = -0.00364051 Jy ! Component: 3150 - total flux cleaned = -0.00378745 Jy ! Component: 3200 - total flux cleaned = -0.00381986 Jy ! Component: 3250 - total flux cleaned = -0.00388447 Jy ! Component: 3300 - total flux cleaned = -0.00396459 Jy ! Component: 3350 - total flux cleaned = -0.00405993 Jy ! Component: 3400 - total flux cleaned = -0.00410738 Jy ! Component: 3450 - total flux cleaned = -0.00418599 Jy ! Component: 3500 - total flux cleaned = -0.0043108 Jy ! Component: 3550 - total flux cleaned = -0.00437277 Jy ! Component: 3600 - total flux cleaned = -0.00446536 Jy ! Component: 3650 - total flux cleaned = -0.00451127 Jy ! Component: 3700 - total flux cleaned = -0.00461789 Jy ! Component: 3750 - total flux cleaned = -0.00469356 Jy ! Component: 3800 - total flux cleaned = -0.00469356 Jy ! Component: 3850 - total flux cleaned = -0.0047535 Jy ! Component: 3900 - total flux cleaned = -0.00479808 Jy ! Component: 3950 - total flux cleaned = -0.00488696 Jy ! Component: 4000 - total flux cleaned = -0.00496049 Jy ! Component: 4050 - total flux cleaned = -0.00496046 Jy ! Total flux subtracted in 4096 components = -0.00509145 Jy ! Clean residual min=-0.000920 max=0.000980 Jy/beam ! Clean residual mean=-0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 1.36722 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 423 components and 1.36722 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0808+4052_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8617 x 1.53 at -10.35 degrees (North through East) ! Clean map min=-0.0024601 max=1.2703 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0808+4052_X_map.fits wmodel /image_prod/ug002_uva//J0808+4052_X_map.mod ! Writing 423 model components to file: /image_prod/ug002_uva//J0808+4052_X_map.mod wobs /image_prod/ug002_uva//J0808+4052_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0808+4052_X_uvs.fits wwins /image_prod/ug002_uva//J0808+4052_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0808+4052_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.27032 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240567 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0568124 0.0568124 0.113625 0.22725 0.454499 0.908998 1.818 3.63599 7.27199 14.544 29.088 58.1759 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.27 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5280.54 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0808+4052_X_dfm.log closed on Wed Mar 4 22:14:59 2020