! Started logfile: /image_prod/ug002_uva//J0807-1207_S_dfm.log on Wed Mar  4 22:14:22 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0807-1207_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0807-1207_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.69 visibilities/baseline/integration-bin.
! Found source: J0807-1207
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3726 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0807-1207_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.996102Jy  sigma=7.349344
! Fit after  self-cal, rms=0.913079Jy  sigma=6.730282
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.441 mas, bmaj=10.22 mas, bpa=12.22 degrees
! Estimated noise=2.24321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0668775 Jy
! Component: 100  -  total flux cleaned = 0.0861844 Jy
! Total flux subtracted in 100 components = 0.0861844 Jy
! Clean residual min=-0.008923 max=0.016723 Jy/beam
! Clean residual mean=-0.000071 rms=0.002959 Jy/beam
! Combined flux in latest and established models = 0.0861844 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0861844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082211Jy  sigma=0.532527
! Fit after  self-cal, rms=0.082013Jy  sigma=0.529223
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=11.26 mas, bpa=10.98 degrees
! Estimated noise=1.62902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.5, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019694 Jy
! Component: 100  -  total flux cleaned = 0.030906 Jy
! Component: 150  -  total flux cleaned = 0.0386193 Jy
! Component: 200  -  total flux cleaned = 0.0429737 Jy
! Total flux subtracted in 200 components = 0.0429737 Jy
! Clean residual min=-0.006139 max=0.008456 Jy/beam
! Clean residual mean=-0.000052 rms=0.001882 Jy/beam
! Combined flux in latest and established models = 0.129158 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 55 components and 0.129158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076786Jy  sigma=0.483058
! Fit after  self-cal, rms=0.076177Jy  sigma=0.477101
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.01 x 11.26 at 10.98 degrees (North through East)
! Clean map  min=-0.0058653  max=0.089431 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.64     FD        0.93     HN        0.99     KP        0.97     
!   LA        0.93     NL        1.09     OV        0.98     PT        0.94     
!   SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        0.97     HN        1.07     KP        1.02     
!   LA        0.93     NL        0.97     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.01     KP        0.97     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.96     
!   SC        0.92     
! 
! 
! Fit before self-cal, rms=0.076177Jy  sigma=0.477101
! Fit after  self-cal, rms=0.071182Jy  sigma=0.471246
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.046 mas, bmaj=11.39 mas, bpa=11.1 degrees
! Estimated noise=1.56497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533406 Jy
! Component: 100  -  total flux cleaned = 0.00663088 Jy
! Component: 150  -  total flux cleaned = 0.00682413 Jy
! Component: 200  -  total flux cleaned = 0.00682548 Jy
! Total flux subtracted in 200 components = 0.00682548 Jy
! Clean residual min=-0.004248 max=0.004680 Jy/beam
! Clean residual mean=-0.000029 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.135984 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 101 components and 0.135984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070774Jy  sigma=0.466178
! Fit after  self-cal, rms=0.070723Jy  sigma=0.465332
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070723Jy  sigma=0.465332
! Fit after  self-cal, rms=0.071589Jy  sigma=0.464423
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.026 mas, bmaj=11.37 mas, bpa=11.16 degrees
! Estimated noise=1.56721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306066 Jy
! Component: 100  -  total flux cleaned = 0.0030761 Jy
! Component: 150  -  total flux cleaned = 0.0028208 Jy
! Component: 200  -  total flux cleaned = 0.00259566 Jy
! Total flux subtracted in 200 components = 0.00259566 Jy
! Clean residual min=-0.004389 max=0.004343 Jy/beam
! Clean residual mean=-0.000016 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.138579 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 129 components and 0.138579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071437Jy  sigma=0.462631
! Fit after  self-cal, rms=0.071420Jy  sigma=0.462360
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000729527 Jy
! Component: 100  -  total flux cleaned = 0.000624976 Jy
! Component: 150  -  total flux cleaned = 0.000288846 Jy
! Component: 200  -  total flux cleaned = 2.8925e-05 Jy
! Total flux subtracted in 200 components = 2.8925e-05 Jy
! Clean residual min=-0.004152 max=0.004250 Jy/beam
! Clean residual mean=-0.000017 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.138608 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 147 components and 0.138608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071351Jy  sigma=0.461638
! Fit after  self-cal, rms=0.071330Jy  sigma=0.461533
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071330Jy  sigma=0.461533
! Fit after  self-cal, rms=0.072075Jy  sigma=0.461325
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.008 mas, bmaj=11.38 mas, bpa=11.36 degrees
! Estimated noise=1.56517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158481 Jy
! Component: 100  -  total flux cleaned = 0.00133658 Jy
! Component: 150  -  total flux cleaned = 0.00106795 Jy
! Component: 200  -  total flux cleaned = 0.000866439 Jy
! Total flux subtracted in 200 components = 0.000866439 Jy
! Clean residual min=-0.004034 max=0.004100 Jy/beam
! Clean residual mean=-0.000015 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.139475 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 169 components and 0.139475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072010Jy  sigma=0.460670
! Fit after  self-cal, rms=0.072008Jy  sigma=0.460589
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (58.5, -121.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228621 Jy
! Component: 100  -  total flux cleaned = 0.00277654 Jy
! Component: 150  -  total flux cleaned = 0.00277196 Jy
! Component: 200  -  total flux cleaned = 0.00289656 Jy
! Total flux subtracted in 200 components = 0.00289656 Jy
! Clean residual min=-0.003054 max=0.003174 Jy/beam
! Clean residual mean=-0.000010 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.142371 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 189 components and 0.142371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071723Jy  sigma=0.458487
! Fit after  self-cal, rms=0.071686Jy  sigma=0.458300
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071686Jy  sigma=0.458300
! Fit after  self-cal, rms=0.072454Jy  sigma=0.458227
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.911 mas, bmaj=16.17 mas, bpa=-0.7479 degrees
! Estimated noise=1.80728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125163 Jy
! Component: 100  -  total flux cleaned = 0.00118515 Jy
! Component: 150  -  total flux cleaned = 0.00118502 Jy
! Component: 200  -  total flux cleaned = 0.00113957 Jy
! Total flux subtracted in 200 components = 0.00113957 Jy
! Clean residual min=-0.003121 max=0.003361 Jy/beam
! Clean residual mean=-0.000012 rms=0.000969 Jy/beam
! Combined flux in latest and established models = 0.143511 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 213 components and 0.143511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072382Jy  sigma=0.457636
! Fit after  self-cal, rms=0.072383Jy  sigma=0.457592
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495263 Jy
! Component: 100  -  total flux cleaned = 0.000495232 Jy
! Component: 150  -  total flux cleaned = 0.000495246 Jy
! Component: 200  -  total flux cleaned = 0.0004621 Jy
! Total flux subtracted in 200 components = 0.0004621 Jy
! Clean residual min=-0.002853 max=0.003244 Jy/beam
! Clean residual mean=-0.000009 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.143973 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 227 components and 0.143973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072350Jy  sigma=0.457331
! Fit after  self-cal, rms=0.072346Jy  sigma=0.457319
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=11.4 mas, bpa=11.45 degrees
! Estimated noise=1.56825 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.009 x 11.4 at 11.45 degrees (North through East)
! Clean map  min=-0.0040703  max=0.085108 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.427 mas, bmaj=10.35 mas, bpa=12.81 degrees
! Estimated noise=2.15574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0636471 Jy
! Component: 100  -  total flux cleaned = 0.0869658 Jy
! Component: 150  -  total flux cleaned = 0.102328 Jy
! Component: 200  -  total flux cleaned = 0.113376 Jy
! Total flux subtracted in 200 components = 0.113376 Jy
! Clean residual min=-0.006086 max=0.007042 Jy/beam
! Clean residual mean=-0.000039 rms=0.001839 Jy/beam
! Combined flux in latest and established models = 0.113376 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.113376 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=11.4 mas, bpa=11.45 degrees
! Estimated noise=1.56825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105711 Jy
! Component: 100  -  total flux cleaned = 0.0175395 Jy
! Component: 150  -  total flux cleaned = 0.0225975 Jy
! Component: 200  -  total flux cleaned = 0.0248098 Jy
! Total flux subtracted in 200 components = 0.0248098 Jy
! Clean residual min=-0.004428 max=0.003730 Jy/beam
! Clean residual mean=-0.000030 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.138186 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 83 components and 0.138186 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.911 mas, bmaj=16.17 mas, bpa=-0.7479 degrees
! Estimated noise=1.80728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023481 Jy
! Component: 100  -  total flux cleaned = 0.00288877 Jy
! Component: 150  -  total flux cleaned = 0.00333856 Jy
! Component: 200  -  total flux cleaned = 0.00353785 Jy
! Total flux subtracted in 200 components = 0.00353785 Jy
! Clean residual min=-0.004300 max=0.004140 Jy/beam
! Clean residual mean=-0.000029 rms=0.001214 Jy/beam
! Combined flux in latest and established models = 0.141723 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.38535e-05 Jy
! Component: 100  -  total flux cleaned = 0.00017387 Jy
! Component: 150  -  total flux cleaned = 0.00024065 Jy
! Component: 200  -  total flux cleaned = 0.000238271 Jy
! Total flux subtracted in 200 components = 0.000238271 Jy
! Clean residual min=-0.003751 max=0.003687 Jy/beam
! Clean residual mean=-0.000021 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.141962 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 146 components and 0.141962 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=11.4 mas, bpa=11.45 degrees
! Estimated noise=1.56825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.62436e-05 Jy
! Component: 100  -  total flux cleaned = -9.57355e-05 Jy
! Component: 150  -  total flux cleaned = 2.97651e-05 Jy
! Component: 200  -  total flux cleaned = 3.04642e-05 Jy
! Total flux subtracted in 200 components = 3.04642e-05 Jy
! Clean residual min=-0.003062 max=0.002751 Jy/beam
! Clean residual mean=-0.000007 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.141992 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 174 components and 0.141992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072383Jy  sigma=0.457759
! Fit after  self-cal, rms=0.072363Jy  sigma=0.457575
wmodel J0807-1207_S_map.mod
! Writing 174 model components to file: J0807-1207_S_map.mod
wobs   J0807-1207_S_uvs.fits
! Writing UV FITS file: J0807-1207_S_uvs.fits
wwins  J0807-1207_S_map.win
! wwins: Wrote 3 windows to J0807-1207_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000894369 Jy
! Component: 100  -  total flux cleaned = -0.00113975 Jy
! Component: 150  -  total flux cleaned = -0.00126836 Jy
! Component: 200  -  total flux cleaned = -0.00147277 Jy
! Component: 250  -  total flux cleaned = -0.00166631 Jy
! Component: 300  -  total flux cleaned = -0.00177737 Jy
! Component: 350  -  total flux cleaned = -0.00188306 Jy
! Component: 400  -  total flux cleaned = -0.0019826 Jy
! Component: 450  -  total flux cleaned = -0.00188638 Jy
! Component: 500  -  total flux cleaned = -0.00194831 Jy
! Component: 550  -  total flux cleaned = -0.00194862 Jy
! Component: 600  -  total flux cleaned = -0.00200683 Jy
! Component: 650  -  total flux cleaned = -0.00214617 Jy
! Component: 700  -  total flux cleaned = -0.00220047 Jy
! Component: 750  -  total flux cleaned = -0.00236002 Jy
! Component: 800  -  total flux cleaned = -0.00259328 Jy
! Component: 850  -  total flux cleaned = -0.00266897 Jy
! Component: 900  -  total flux cleaned = -0.00276849 Jy
! Component: 950  -  total flux cleaned = -0.00286535 Jy
! Component: 1000  -  total flux cleaned = -0.0029596 Jy
! Component: 1050  -  total flux cleaned = -0.00305198 Jy
! Component: 1100  -  total flux cleaned = -0.00312008 Jy
! Component: 1150  -  total flux cleaned = -0.00323091 Jy
! Component: 1200  -  total flux cleaned = -0.00325242 Jy
! Component: 1250  -  total flux cleaned = -0.00338078 Jy
! Component: 1300  -  total flux cleaned = -0.00348628 Jy
! Component: 1350  -  total flux cleaned = -0.00350696 Jy
! Component: 1400  -  total flux cleaned = -0.00360891 Jy
! Component: 1450  -  total flux cleaned = -0.0036493 Jy
! Component: 1500  -  total flux cleaned = -0.00374815 Jy
! Component: 1550  -  total flux cleaned = -0.00382573 Jy
! Component: 1600  -  total flux cleaned = -0.00384479 Jy
! Component: 1650  -  total flux cleaned = -0.00393883 Jy
! Component: 1700  -  total flux cleaned = -0.00392049 Jy
! Component: 1750  -  total flux cleaned = -0.00399354 Jy
! Component: 1800  -  total flux cleaned = -0.00395749 Jy
! Component: 1850  -  total flux cleaned = -0.00397505 Jy
! Component: 1900  -  total flux cleaned = -0.00395741 Jy
! Component: 1950  -  total flux cleaned = -0.00395754 Jy
! Component: 2000  -  total flux cleaned = -0.00399186 Jy
! Component: 2050  -  total flux cleaned = -0.00402596 Jy
! Component: 2100  -  total flux cleaned = -0.00407633 Jy
! Component: 2150  -  total flux cleaned = -0.00412627 Jy
! Component: 2200  -  total flux cleaned = -0.00414263 Jy
! Component: 2250  -  total flux cleaned = -0.00415893 Jy
! Component: 2300  -  total flux cleaned = -0.0041589 Jy
! Component: 2350  -  total flux cleaned = -0.00420701 Jy
! Component: 2400  -  total flux cleaned = -0.00425451 Jy
! Component: 2450  -  total flux cleaned = -0.00427005 Jy
! Component: 2500  -  total flux cleaned = -0.00427001 Jy
! Component: 2550  -  total flux cleaned = -0.00428541 Jy
! Component: 2600  -  total flux cleaned = -0.00430063 Jy
! Component: 2650  -  total flux cleaned = -0.00428543 Jy
! Component: 2700  -  total flux cleaned = -0.00433063 Jy
! Component: 2750  -  total flux cleaned = -0.0043755 Jy
! Component: 2800  -  total flux cleaned = -0.00442011 Jy
! Component: 2850  -  total flux cleaned = -0.0044054 Jy
! Component: 2900  -  total flux cleaned = -0.00444948 Jy
! Component: 2950  -  total flux cleaned = -0.00444951 Jy
! Component: 3000  -  total flux cleaned = -0.00446398 Jy
! Component: 3050  -  total flux cleaned = -0.0044496 Jy
! Component: 3100  -  total flux cleaned = -0.00444961 Jy
! Component: 3150  -  total flux cleaned = -0.0044355 Jy
! Component: 3200  -  total flux cleaned = -0.00443543 Jy
! Component: 3250  -  total flux cleaned = -0.00444962 Jy
! Component: 3300  -  total flux cleaned = -0.00444961 Jy
! Component: 3350  -  total flux cleaned = -0.00440777 Jy
! Component: 3400  -  total flux cleaned = -0.00439392 Jy
! Component: 3450  -  total flux cleaned = -0.00438017 Jy
! Component: 3500  -  total flux cleaned = -0.00433905 Jy
! Component: 3550  -  total flux cleaned = -0.00433907 Jy
! Component: 3600  -  total flux cleaned = -0.0043118 Jy
! Component: 3650  -  total flux cleaned = -0.00431181 Jy
! Component: 3700  -  total flux cleaned = -0.00425776 Jy
! Component: 3750  -  total flux cleaned = -0.00420398 Jy
! Component: 3800  -  total flux cleaned = -0.00420403 Jy
! Component: 3850  -  total flux cleaned = -0.00417739 Jy
! Component: 3900  -  total flux cleaned = -0.00407132 Jy
! Component: 3950  -  total flux cleaned = -0.00409775 Jy
! Component: 4000  -  total flux cleaned = -0.00405822 Jy
! Component: 4050  -  total flux cleaned = -0.00405823 Jy
! Total flux subtracted in 4096 components = -0.00399286 Jy
! Clean residual min=-0.000727 max=0.000864 Jy/beam
! Clean residual mean=-0.000003 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.137999 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 441 components and 0.137999 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0807-1207_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.009 x 11.4 at 11.45 degrees (North through East)
! Clean map  min=-0.0037124  max=0.08358 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0807-1207_S_map.fits
wmodel /image_prod/ug002_uva//J0807-1207_S_map.mod
! Writing 441 model components to file: /image_prod/ug002_uva//J0807-1207_S_map.mod
wobs   /image_prod/ug002_uva//J0807-1207_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0807-1207_S_uvs.fits
wwins  /image_prod/ug002_uva//J0807-1207_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0807-1207_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0835803 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000231498 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.830929 0.830929 1.66186 3.32372 6.64744 13.2949 26.5897 53.1795
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  361.041 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0807-1207_S_dfm.log closed on Wed Mar  4 22:14:25 2020