! Started logfile: /image_prod/ug002_uva//J0804-1712_S_dfm.log on Wed Mar 4 22:09:50 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0804-1712_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0804-1712_S_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.992143 visibilities/baseline/integration-bin. ! Found source: J0804-1712 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 4167 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0804-1712_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.010103Jy sigma=6.306287 ! Fit after self-cal, rms=0.934770Jy sigma=5.804209 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=6.714 mas, bpa=-3.53 degrees ! Estimated noise=2.65185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523 Jy ! Component: 100 - total flux cleaned = 0.0673498 Jy ! Total flux subtracted in 100 components = 0.0673498 Jy ! Clean residual min=-0.006582 max=0.009316 Jy/beam ! Clean residual mean=-0.000061 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.0673498 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0673498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086607Jy sigma=0.460623 ! Fit after self-cal, rms=0.085796Jy sigma=0.454890 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.114 mas, bpa=-4.904 degrees ! Estimated noise=1.82946 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010936 Jy ! Component: 100 - total flux cleaned = 0.016703 Jy ! Component: 150 - total flux cleaned = 0.0201107 Jy ! Component: 200 - total flux cleaned = 0.0222662 Jy ! Total flux subtracted in 200 components = 0.0222662 Jy ! Clean residual min=-0.005497 max=0.007730 Jy/beam ! Clean residual mean=-0.000032 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.0896159 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.0896159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084514Jy sigma=0.443483 ! Fit after self-cal, rms=0.084532Jy sigma=0.443128 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 7.114 at -4.904 degrees (North through East) ! Clean map min=-0.0052681 max=0.069376 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.86 HN 1.20 KP 0.93 ! MK 1.01 NL 1.11 OV 0.98 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.42 FD 0.90 HN 1.03 KP 1.05 ! MK 1.02 NL 1.21 OV 0.86 SC 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 1.09 KP 1.03 ! MK 0.91 NL 0.95 OV 0.88 SC 0.93 ! ! ! Fit before self-cal, rms=0.084532Jy sigma=0.443128 ! Fit after self-cal, rms=0.088391Jy sigma=0.437053 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=7.208 mas, bpa=-5.039 degrees ! Estimated noise=1.81954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473215 Jy ! Component: 100 - total flux cleaned = 0.00462203 Jy ! Component: 150 - total flux cleaned = 0.0044442 Jy ! Component: 200 - total flux cleaned = 0.004301 Jy ! Total flux subtracted in 200 components = 0.004301 Jy ! Clean residual min=-0.004155 max=0.004258 Jy/beam ! Clean residual mean=-0.000012 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.0939169 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.0939169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087945Jy sigma=0.434547 ! Fit after self-cal, rms=0.088245Jy sigma=0.433713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088245Jy sigma=0.433713 ! Fit after self-cal, rms=0.087362Jy sigma=0.429485 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=7.206 mas, bpa=-4.377 degrees ! Estimated noise=1.80086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263651 Jy ! Component: 100 - total flux cleaned = 0.00372243 Jy ! Component: 150 - total flux cleaned = 0.00395627 Jy ! Component: 200 - total flux cleaned = 0.00395932 Jy ! Total flux subtracted in 200 components = 0.00395932 Jy ! Clean residual min=-0.003643 max=0.003929 Jy/beam ! Clean residual mean=-0.000011 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.0978762 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.0978762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087254Jy sigma=0.428809 ! Fit after self-cal, rms=0.087355Jy sigma=0.428469 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-103.5, -49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351768 Jy ! Component: 100 - total flux cleaned = 0.00426455 Jy ! Component: 150 - total flux cleaned = 0.00478331 Jy ! Component: 200 - total flux cleaned = 0.0055237 Jy ! Total flux subtracted in 200 components = 0.0055237 Jy ! Clean residual min=-0.003410 max=0.003259 Jy/beam ! Clean residual mean=-0.000006 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.1034 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.1034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087172Jy sigma=0.427095 ! Fit after self-cal, rms=0.087128Jy sigma=0.426928 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087128Jy sigma=0.426928 ! Fit after self-cal, rms=0.087049Jy sigma=0.426823 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.19 mas, bpa=-4.342 degrees ! Estimated noise=1.78703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176711 Jy ! Component: 100 - total flux cleaned = 0.00259051 Jy ! Component: 150 - total flux cleaned = 0.00320436 Jy ! Component: 200 - total flux cleaned = 0.00370914 Jy ! Total flux subtracted in 200 components = 0.00370914 Jy ! Clean residual min=-0.003301 max=0.003172 Jy/beam ! Clean residual mean=-0.000006 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.107109 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.107109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086981Jy sigma=0.426374 ! Fit after self-cal, rms=0.086965Jy sigma=0.426321 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110794 Jy ! Component: 100 - total flux cleaned = 0.00154537 Jy ! Component: 150 - total flux cleaned = 0.00183899 Jy ! Component: 200 - total flux cleaned = 0.00207614 Jy ! Total flux subtracted in 200 components = 0.00207614 Jy ! Clean residual min=-0.003246 max=0.003186 Jy/beam ! Clean residual mean=-0.000005 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.109185 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 112 components and 0.109185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086929Jy sigma=0.426102 ! Fit after self-cal, rms=0.086923Jy sigma=0.426086 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086923Jy sigma=0.426086 ! Fit after self-cal, rms=0.086826Jy sigma=0.426049 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.423 mas, bmaj=12.32 mas, bpa=-1.196 degrees ! Estimated noise=2.36569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208251 Jy ! Component: 100 - total flux cleaned = 0.00304462 Jy ! Component: 150 - total flux cleaned = 0.00375303 Jy ! Component: 200 - total flux cleaned = 0.00421912 Jy ! Total flux subtracted in 200 components = 0.00421912 Jy ! Clean residual min=-0.003548 max=0.003314 Jy/beam ! Clean residual mean=-0.000011 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.113404 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.113404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086826Jy sigma=0.426010 ! Fit after self-cal, rms=0.086803Jy sigma=0.425924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903068 Jy ! Component: 100 - total flux cleaned = 0.00137396 Jy ! Component: 150 - total flux cleaned = 0.0017143 Jy ! Component: 200 - total flux cleaned = 0.00193958 Jy ! Total flux subtracted in 200 components = 0.00193958 Jy ! Clean residual min=-0.003407 max=0.003220 Jy/beam ! Clean residual mean=-0.000007 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.115344 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 140 components and 0.115344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086801Jy sigma=0.425957 ! Fit after self-cal, rms=0.086796Jy sigma=0.425932 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.19 mas, bpa=-4.406 degrees ! Estimated noise=1.7858 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 7.19 at -4.406 degrees (North through East) ! Clean map min=-0.0030473 max=0.068151 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.783 mas, bpa=-3.324 degrees ! Estimated noise=2.56548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504898 Jy ! Component: 100 - total flux cleaned = 0.0674453 Jy ! Component: 150 - total flux cleaned = 0.0779047 Jy ! Component: 200 - total flux cleaned = 0.0847377 Jy ! Total flux subtracted in 200 components = 0.0847377 Jy ! Clean residual min=-0.004801 max=0.005162 Jy/beam ! Clean residual mean=-0.000032 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.0847378 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0847378 Jy ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.19 mas, bpa=-4.406 degrees ! Estimated noise=1.7858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571442 Jy ! Component: 100 - total flux cleaned = 0.00972417 Jy ! Component: 150 - total flux cleaned = 0.013023 Jy ! Component: 200 - total flux cleaned = 0.0157286 Jy ! Total flux subtracted in 200 components = 0.0157286 Jy ! Clean residual min=-0.004096 max=0.003512 Jy/beam ! Clean residual mean=-0.000017 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.100466 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 53 components and 0.100466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.423 mas, bmaj=12.32 mas, bpa=-1.196 degrees ! Estimated noise=2.36569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043462 Jy ! Component: 100 - total flux cleaned = 0.00694301 Jy ! Component: 150 - total flux cleaned = 0.00859548 Jy ! Component: 200 - total flux cleaned = 0.00987631 Jy ! Total flux subtracted in 200 components = 0.00987631 Jy ! Clean residual min=-0.004093 max=0.003464 Jy/beam ! Clean residual mean=-0.000018 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.110343 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940165 Jy ! Component: 100 - total flux cleaned = 0.0017493 Jy ! Component: 150 - total flux cleaned = 0.00231296 Jy ! Component: 200 - total flux cleaned = 0.002681 Jy ! Total flux subtracted in 200 components = 0.002681 Jy ! Clean residual min=-0.003704 max=0.003352 Jy/beam ! Clean residual mean=-0.000012 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.113024 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 100 components and 0.113024 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.19 mas, bpa=-4.406 degrees ! Estimated noise=1.7858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373109 Jy ! Component: 100 - total flux cleaned = -0.000237306 Jy ! Component: 150 - total flux cleaned = -0.00017648 Jy ! Component: 200 - total flux cleaned = -7.81586e-05 Jy ! Total flux subtracted in 200 components = -7.81586e-05 Jy ! Clean residual min=-0.003257 max=0.003040 Jy/beam ! Clean residual mean=-0.000005 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.112945 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.112945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086870Jy sigma=0.426392 ! Fit after self-cal, rms=0.086860Jy sigma=0.426206 wmodel J0804-1712_S_map.mod ! Writing 115 model components to file: J0804-1712_S_map.mod wobs J0804-1712_S_uvs.fits ! Writing UV FITS file: J0804-1712_S_uvs.fits wwins J0804-1712_S_map.win ! wwins: Wrote 3 windows to J0804-1712_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000714158 Jy ! Component: 100 - total flux cleaned = -0.00128251 Jy ! Component: 150 - total flux cleaned = -0.00161664 Jy ! Component: 200 - total flux cleaned = -0.00183998 Jy ! Component: 250 - total flux cleaned = -0.00184108 Jy ! Component: 300 - total flux cleaned = -0.00188154 Jy ! Component: 350 - total flux cleaned = -0.00192113 Jy ! Component: 400 - total flux cleaned = -0.00184681 Jy ! Component: 450 - total flux cleaned = -0.00181032 Jy ! Component: 500 - total flux cleaned = -0.00167032 Jy ! Component: 550 - total flux cleaned = -0.00163648 Jy ! Component: 600 - total flux cleaned = -0.00157019 Jy ! Component: 650 - total flux cleaned = -0.00150571 Jy ! Component: 700 - total flux cleaned = -0.00144333 Jy ! Component: 750 - total flux cleaned = -0.00138212 Jy ! Component: 800 - total flux cleaned = -0.00132286 Jy ! Component: 850 - total flux cleaned = -0.00126459 Jy ! Component: 900 - total flux cleaned = -0.00115188 Jy ! Component: 950 - total flux cleaned = -0.00106956 Jy ! Component: 1000 - total flux cleaned = -0.00104216 Jy ! Component: 1050 - total flux cleaned = -0.000962739 Jy ! Component: 1100 - total flux cleaned = -0.000885276 Jy ! Component: 1150 - total flux cleaned = -0.00083526 Jy ! Component: 1200 - total flux cleaned = -0.000711172 Jy ! Component: 1250 - total flux cleaned = -0.000565301 Jy ! Component: 1300 - total flux cleaned = -0.000446217 Jy ! Component: 1350 - total flux cleaned = -0.000375977 Jy ! Component: 1400 - total flux cleaned = -0.000283664 Jy ! Component: 1450 - total flux cleaned = -0.000170667 Jy ! Component: 1500 - total flux cleaned = -0.000103907 Jy ! Component: 1550 - total flux cleaned = 6.00298e-06 Jy ! Component: 1600 - total flux cleaned = 0.000178595 Jy ! Component: 1650 - total flux cleaned = 0.000284289 Jy ! Component: 1700 - total flux cleaned = 0.000367837 Jy ! Component: 1750 - total flux cleaned = 0.000450338 Jy ! Component: 1800 - total flux cleaned = 0.000531418 Jy ! Component: 1850 - total flux cleaned = 0.000551188 Jy ! Component: 1900 - total flux cleaned = 0.000630157 Jy ! Component: 1950 - total flux cleaned = 0.00066954 Jy ! Component: 2000 - total flux cleaned = 0.000746691 Jy ! Component: 2050 - total flux cleaned = 0.000841671 Jy ! Component: 2100 - total flux cleaned = 0.000935737 Jy ! Component: 2150 - total flux cleaned = 0.000991212 Jy ! Component: 2200 - total flux cleaned = 0.00106441 Jy ! Component: 2250 - total flux cleaned = 0.00113691 Jy ! Component: 2300 - total flux cleaned = 0.00120831 Jy ! Component: 2350 - total flux cleaned = 0.00131424 Jy ! Component: 2400 - total flux cleaned = 0.00127933 Jy ! Component: 2450 - total flux cleaned = 0.0012968 Jy ! Component: 2500 - total flux cleaned = 0.00134809 Jy ! Component: 2550 - total flux cleaned = 0.00129715 Jy ! Component: 2600 - total flux cleaned = 0.00129721 Jy ! Component: 2650 - total flux cleaned = 0.00128074 Jy ! Component: 2700 - total flux cleaned = 0.00133023 Jy ! Component: 2750 - total flux cleaned = 0.00128159 Jy ! Component: 2800 - total flux cleaned = 0.00131359 Jy ! Component: 2850 - total flux cleaned = 0.00126565 Jy ! Component: 2900 - total flux cleaned = 0.00126572 Jy ! Component: 2950 - total flux cleaned = 0.00125007 Jy ! Component: 3000 - total flux cleaned = 0.00124977 Jy ! Component: 3050 - total flux cleaned = 0.00124986 Jy ! Component: 3100 - total flux cleaned = 0.0012804 Jy ! Component: 3150 - total flux cleaned = 0.00128046 Jy ! Component: 3200 - total flux cleaned = 0.00129532 Jy ! Component: 3250 - total flux cleaned = 0.00126574 Jy ! Component: 3300 - total flux cleaned = 0.00130965 Jy ! Component: 3350 - total flux cleaned = 0.00132428 Jy ! Component: 3400 - total flux cleaned = 0.00135308 Jy ! Component: 3450 - total flux cleaned = 0.00132428 Jy ! Component: 3500 - total flux cleaned = 0.00136722 Jy ! Component: 3550 - total flux cleaned = 0.00139559 Jy ! Component: 3600 - total flux cleaned = 0.00143782 Jy ! Component: 3650 - total flux cleaned = 0.00143784 Jy ! Component: 3700 - total flux cleaned = 0.00149322 Jy ! Component: 3750 - total flux cleaned = 0.00146576 Jy ! Component: 3800 - total flux cleaned = 0.00152031 Jy ! Component: 3850 - total flux cleaned = 0.0015474 Jy ! Component: 3900 - total flux cleaned = 0.00157434 Jy ! Component: 3950 - total flux cleaned = 0.00161449 Jy ! Component: 4000 - total flux cleaned = 0.00164111 Jy ! Component: 4050 - total flux cleaned = 0.00166755 Jy ! Total flux subtracted in 4096 components = 0.00169395 Jy ! Clean residual min=-0.000861 max=0.000755 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.114639 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 347 components and 0.114639 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0804-1712_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 7.19 at -4.406 degrees (North through East) ! Clean map min=-0.0021626 max=0.069324 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0804-1712_S_map.fits wmodel /image_prod/ug002_uva//J0804-1712_S_map.mod ! Writing 347 model components to file: /image_prod/ug002_uva//J0804-1712_S_map.mod wobs /image_prod/ug002_uva//J0804-1712_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0804-1712_S_uvs.fits wwins /image_prod/ug002_uva//J0804-1712_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0804-1712_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.069324 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211159 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.91379 0.91379 1.82758 3.65516 7.31032 14.6206 29.2413 58.4826 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.069 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 328.302 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0804-1712_S_dfm.log closed on Wed Mar 4 22:09:53 2020