! Started logfile: /image_prod/ug002_uva//J0802-3810_S_dfm.log on Wed Mar  4 22:08:59 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0802-3810_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0802-3810_S_uva.fits
! AN table 1: 75 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.852698 visibilities/baseline/integration-bin.
! Found source: J0802-3810
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4029 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0802-3810_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010648Jy  sigma=5.748677
! Fit after  self-cal, rms=0.925034Jy  sigma=5.264342
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.075 mas, bmaj=34.65 mas, bpa=-6.613 degrees
! Estimated noise=2.39655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0637662 Jy
! Component: 100  -  total flux cleaned = 0.0790131 Jy
! Total flux subtracted in 100 components = 0.0790131 Jy
! Clean residual min=-0.004719 max=0.005911 Jy/beam
! Clean residual mean=-0.000035 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.0790131 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0790131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093221Jy  sigma=0.450758
! Fit after  self-cal, rms=0.092390Jy  sigma=0.443587
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.774 mas, bmaj=36.3 mas, bpa=-2.663 degrees
! Estimated noise=2.02617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00623894 Jy
! Component: 100  -  total flux cleaned = 0.0092122 Jy
! Component: 150  -  total flux cleaned = 0.0106651 Jy
! Component: 200  -  total flux cleaned = 0.0106688 Jy
! Total flux subtracted in 200 components = 0.0106688 Jy
! Clean residual min=-0.003783 max=0.002604 Jy/beam
! Clean residual mean=-0.000042 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.0896818 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 50 components and 0.0896818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091969Jy  sigma=0.441124
! Fit after  self-cal, rms=0.092082Jy  sigma=0.440990
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.774 x 36.3 at -2.663 degrees (North through East)
! Clean map  min=-0.0038538  max=0.08147 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     KP        0.97     LA        1.00     
!   NL        1.11     OV        1.03     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.05     KP        0.97     LA        1.06     
!   NL        1.25     OV        0.94     PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.01     KP        0.95     LA        1.03     
!   NL        0.85     OV        0.97     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.092082Jy  sigma=0.440990
! Fit after  self-cal, rms=0.092188Jy  sigma=0.439328
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.802 mas, bmaj=36.32 mas, bpa=-2.469 degrees
! Estimated noise=2.02194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000250382 Jy
! Component: 100  -  total flux cleaned = -0.000349009 Jy
! Component: 150  -  total flux cleaned = -0.000393004 Jy
! Component: 200  -  total flux cleaned = -0.000472239 Jy
! Total flux subtracted in 200 components = -0.000472239 Jy
! Clean residual min=-0.004047 max=0.002541 Jy/beam
! Clean residual mean=-0.000067 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.0892096 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 70 components and 0.0892096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092133Jy  sigma=0.439110
! Fit after  self-cal, rms=0.092188Jy  sigma=0.438985
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092188Jy  sigma=0.438985
! Fit after  self-cal, rms=0.092433Jy  sigma=0.438338
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.781 mas, bmaj=36.09 mas, bpa=-2.654 degrees
! Estimated noise=2.01893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.11902e-05 Jy
! Component: 100  -  total flux cleaned = -0.00010955 Jy
! Component: 150  -  total flux cleaned = -0.000222505 Jy
! Component: 200  -  total flux cleaned = -0.000296139 Jy
! Total flux subtracted in 200 components = -0.000296139 Jy
! Clean residual min=-0.004115 max=0.002463 Jy/beam
! Clean residual mean=-0.000067 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.0889135 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.0889135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092404Jy  sigma=0.438253
! Fit after  self-cal, rms=0.092447Jy  sigma=0.438186
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000199875 Jy
! Component: 100  -  total flux cleaned = -0.000224284 Jy
! Component: 150  -  total flux cleaned = -0.000224635 Jy
! Component: 200  -  total flux cleaned = -0.000244789 Jy
! Total flux subtracted in 200 components = -0.000244789 Jy
! Clean residual min=-0.004157 max=0.002369 Jy/beam
! Clean residual mean=-0.000068 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.0886687 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.0886687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092431Jy  sigma=0.438141
! Fit after  self-cal, rms=0.092441Jy  sigma=0.438135
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092441Jy  sigma=0.438135
! Fit after  self-cal, rms=0.092434Jy  sigma=0.438115
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.754 mas, bmaj=35.97 mas, bpa=-2.732 degrees
! Estimated noise=2.02234 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387711 Jy
! Component: 100  -  total flux cleaned = 0.000449113 Jy
! Component: 150  -  total flux cleaned = 0.000448095 Jy
! Component: 200  -  total flux cleaned = 0.000448183 Jy
! Total flux subtracted in 200 components = 0.000448183 Jy
! Clean residual min=-0.004187 max=0.002309 Jy/beam
! Clean residual mean=-0.000071 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.0891169 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 113 components and 0.0891169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092422Jy  sigma=0.438082
! Fit after  self-cal, rms=0.092433Jy  sigma=0.438074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.5185e-05 Jy
! Component: 100  -  total flux cleaned = -2.58116e-05 Jy
! Component: 150  -  total flux cleaned = 3.60611e-06 Jy
! Component: 200  -  total flux cleaned = 3.08645e-05 Jy
! Total flux subtracted in 200 components = 3.08645e-05 Jy
! Clean residual min=-0.004216 max=0.002321 Jy/beam
! Clean residual mean=-0.000071 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.0891477 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 116 components and 0.0891477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092428Jy  sigma=0.438050
! Fit after  self-cal, rms=0.092434Jy  sigma=0.438047
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092434Jy  sigma=0.438047
! Fit after  self-cal, rms=0.092248Jy  sigma=0.438040
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.03 mas, bmaj=39.74 mas, bpa=-1.838 degrees
! Estimated noise=1.9982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483567 Jy
! Component: 100  -  total flux cleaned = 0.000543452 Jy
! Component: 150  -  total flux cleaned = 0.000543634 Jy
! Component: 200  -  total flux cleaned = 0.000555188 Jy
! Total flux subtracted in 200 components = 0.000555188 Jy
! Clean residual min=-0.004020 max=0.002216 Jy/beam
! Clean residual mean=-0.000082 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.0897029 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 140 components and 0.0897029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092245Jy  sigma=0.438009
! Fit after  self-cal, rms=0.092239Jy  sigma=0.438005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.69514e-05 Jy
! Component: 100  -  total flux cleaned = 2.48208e-05 Jy
! Component: 150  -  total flux cleaned = 2.51319e-05 Jy
! Component: 200  -  total flux cleaned = 3.49655e-05 Jy
! Total flux subtracted in 200 components = 3.49655e-05 Jy
! Clean residual min=-0.004034 max=0.002225 Jy/beam
! Clean residual mean=-0.000081 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.0897379 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 145 components and 0.0897379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092238Jy  sigma=0.437988
! Fit after  self-cal, rms=0.092240Jy  sigma=0.437986
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.728 mas, bmaj=35.86 mas, bpa=-2.783 degrees
! Estimated noise=2.02572 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.728 x 35.86 at -2.783 degrees (North through East)
! Clean map  min=-0.0042235  max=0.082799 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.046 mas, bmaj=34.42 mas, bpa=-6.689 degrees
! Estimated noise=2.38099 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0638512 Jy
! Component: 100  -  total flux cleaned = 0.0803476 Jy
! Component: 150  -  total flux cleaned = 0.0875616 Jy
! Component: 200  -  total flux cleaned = 0.0910877 Jy
! Total flux subtracted in 200 components = 0.0910877 Jy
! Clean residual min=-0.003637 max=0.003396 Jy/beam
! Clean residual mean=-0.000042 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.0910878 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0910878 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.728 mas, bmaj=35.86 mas, bpa=-2.783 degrees
! Estimated noise=2.02572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000639523 Jy
! Component: 100  -  total flux cleaned = -0.000701173 Jy
! Component: 150  -  total flux cleaned = -0.000752748 Jy
! Component: 200  -  total flux cleaned = -0.000842207 Jy
! Total flux subtracted in 200 components = -0.000842207 Jy
! Clean residual min=-0.004169 max=0.002560 Jy/beam
! Clean residual mean=-0.000070 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.0902456 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.0902456 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.03 mas, bmaj=39.74 mas, bpa=-1.838 degrees
! Estimated noise=1.9982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101895 Jy
! Component: 100  -  total flux cleaned = 0.000127796 Jy
! Component: 150  -  total flux cleaned = 7.96691e-05 Jy
! Component: 200  -  total flux cleaned = 5.86359e-05 Jy
! Total flux subtracted in 200 components = 5.86359e-05 Jy
! Clean residual min=-0.004011 max=0.002333 Jy/beam
! Clean residual mean=-0.000080 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.0903042 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.04191e-05 Jy
! Component: 100  -  total flux cleaned = -5.67266e-05 Jy
! Component: 150  -  total flux cleaned = -7.29608e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105952 Jy
! Total flux subtracted in 200 components = -0.000105952 Jy
! Clean residual min=-0.004014 max=0.002305 Jy/beam
! Clean residual mean=-0.000080 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.0901982 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.0901983 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.728 mas, bmaj=35.86 mas, bpa=-2.783 degrees
! Estimated noise=2.02572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.83796e-05 Jy
! Component: 100  -  total flux cleaned = -9.34943e-05 Jy
! Component: 150  -  total flux cleaned = -0.000131318 Jy
! Component: 200  -  total flux cleaned = -0.000219881 Jy
! Total flux subtracted in 200 components = -0.000219881 Jy
! Clean residual min=-0.004218 max=0.002419 Jy/beam
! Clean residual mean=-0.000070 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.0899784 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.0899784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092242Jy  sigma=0.438022
! Fit after  self-cal, rms=0.092252Jy  sigma=0.438017
wmodel J0802-3810_S_map.mod
! Writing 77 model components to file: J0802-3810_S_map.mod
wobs   J0802-3810_S_uvs.fits
! Writing UV FITS file: J0802-3810_S_uvs.fits
wwins  J0802-3810_S_map.win
! wwins: Wrote 1 windows to J0802-3810_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00167593 Jy
! Component: 100  -  total flux cleaned = -0.00251748 Jy
! Component: 150  -  total flux cleaned = -0.00274514 Jy
! Component: 200  -  total flux cleaned = -0.00295212 Jy
! Component: 250  -  total flux cleaned = -0.00308116 Jy
! Component: 300  -  total flux cleaned = -0.00314169 Jy
! Component: 350  -  total flux cleaned = -0.00319944 Jy
! Component: 400  -  total flux cleaned = -0.00330773 Jy
! Component: 450  -  total flux cleaned = -0.00335902 Jy
! Component: 500  -  total flux cleaned = -0.00343277 Jy
! Component: 550  -  total flux cleaned = -0.00357223 Jy
! Component: 600  -  total flux cleaned = -0.00366078 Jy
! Component: 650  -  total flux cleaned = -0.00361849 Jy
! Component: 700  -  total flux cleaned = -0.00363923 Jy
! Component: 750  -  total flux cleaned = -0.00375691 Jy
! Component: 800  -  total flux cleaned = -0.00375697 Jy
! Component: 850  -  total flux cleaned = -0.00384816 Jy
! Component: 900  -  total flux cleaned = -0.00391841 Jy
! Component: 950  -  total flux cleaned = -0.00405618 Jy
! Component: 1000  -  total flux cleaned = -0.00419099 Jy
! Component: 1050  -  total flux cleaned = -0.00430687 Jy
! Component: 1100  -  total flux cleaned = -0.00443711 Jy
! Component: 1150  -  total flux cleaned = -0.00453251 Jy
! Component: 1200  -  total flux cleaned = -0.00461076 Jy
! Component: 1250  -  total flux cleaned = -0.00468724 Jy
! Component: 1300  -  total flux cleaned = -0.00477776 Jy
! Component: 1350  -  total flux cleaned = -0.00485203 Jy
! Component: 1400  -  total flux cleaned = -0.0049403 Jy
! Component: 1450  -  total flux cleaned = -0.00504134 Jy
! Component: 1500  -  total flux cleaned = -0.00511236 Jy
! Component: 1550  -  total flux cleaned = -0.00512666 Jy
! Component: 1600  -  total flux cleaned = -0.00522351 Jy
! Component: 1650  -  total flux cleaned = -0.00526433 Jy
! Component: 1700  -  total flux cleaned = -0.00531812 Jy
! Component: 1750  -  total flux cleaned = -0.00535806 Jy
! Component: 1800  -  total flux cleaned = -0.00542348 Jy
! Component: 1850  -  total flux cleaned = -0.00550112 Jy
! Component: 1900  -  total flux cleaned = -0.00555227 Jy
! Component: 1950  -  total flux cleaned = -0.00560269 Jy
! Component: 2000  -  total flux cleaned = -0.00564012 Jy
! Component: 2050  -  total flux cleaned = -0.00568963 Jy
! Component: 2100  -  total flux cleaned = -0.00576299 Jy
! Component: 2150  -  total flux cleaned = -0.00582345 Jy
! Component: 2200  -  total flux cleaned = -0.00590722 Jy
! Component: 2250  -  total flux cleaned = -0.00599037 Jy
! Component: 2300  -  total flux cleaned = -0.00602585 Jy
! Component: 2350  -  total flux cleaned = -0.00614255 Jy
! Component: 2400  -  total flux cleaned = -0.00617725 Jy
! Component: 2450  -  total flux cleaned = -0.006269 Jy
! Component: 2500  -  total flux cleaned = -0.00633712 Jy
! Component: 2550  -  total flux cleaned = -0.0063709 Jy
! Component: 2600  -  total flux cleaned = -0.00646024 Jy
! Component: 2650  -  total flux cleaned = -0.00652664 Jy
! Component: 2700  -  total flux cleaned = -0.00660346 Jy
! Component: 2750  -  total flux cleaned = -0.00667964 Jy
! Component: 2800  -  total flux cleaned = -0.00675526 Jy
! Component: 2850  -  total flux cleaned = -0.00679804 Jy
! Component: 2900  -  total flux cleaned = -0.00687259 Jy
! Component: 2950  -  total flux cleaned = -0.00692541 Jy
! Component: 3000  -  total flux cleaned = -0.00699874 Jy
! Component: 3050  -  total flux cleaned = -0.00705071 Jy
! Component: 3100  -  total flux cleaned = -0.00709192 Jy
! Component: 3150  -  total flux cleaned = -0.00712267 Jy
! Component: 3200  -  total flux cleaned = -0.00716332 Jy
! Component: 3250  -  total flux cleaned = -0.0071633 Jy
! Component: 3300  -  total flux cleaned = -0.00720342 Jy
! Component: 3350  -  total flux cleaned = -0.00718357 Jy
! Component: 3400  -  total flux cleaned = -0.00722317 Jy
! Component: 3450  -  total flux cleaned = -0.0072625 Jy
! Component: 3500  -  total flux cleaned = -0.00728208 Jy
! Component: 3550  -  total flux cleaned = -0.00734064 Jy
! Component: 3600  -  total flux cleaned = -0.0073503 Jy
! Component: 3650  -  total flux cleaned = -0.00739859 Jy
! Component: 3700  -  total flux cleaned = -0.00739865 Jy
! Component: 3750  -  total flux cleaned = -0.00744668 Jy
! Component: 3800  -  total flux cleaned = -0.00745626 Jy
! Component: 3850  -  total flux cleaned = -0.00747532 Jy
! Component: 3900  -  total flux cleaned = -0.0075133 Jy
! Component: 3950  -  total flux cleaned = -0.00753228 Jy
! Component: 4000  -  total flux cleaned = -0.00757011 Jy
! Component: 4050  -  total flux cleaned = -0.00760789 Jy
! Total flux subtracted in 4096 components = -0.00765503 Jy
! Clean residual min=-0.000600 max=0.000498 Jy/beam
! Clean residual mean=-0.000009 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0823234 Jy
keep
! Adding 370 model components to the UV plane model.
! The established model now contains 447 components and 0.0823234 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0802-3810_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.728 x 35.86 at -2.783 degrees (North through East)
! Clean map  min=-0.0033802  max=0.082173 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0802-3810_S_map.fits
wmodel /image_prod/ug002_uva//J0802-3810_S_map.mod
! Writing 447 model components to file: /image_prod/ug002_uva//J0802-3810_S_map.mod
wobs   /image_prod/ug002_uva//J0802-3810_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0802-3810_S_uvs.fits
wwins  /image_prod/ug002_uva//J0802-3810_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0802-3810_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0821729 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000201945 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.737267 0.737267 1.47453 2.94907 5.89814 11.7963 23.5926 47.1851 94.3702
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.082 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  406.908 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0802-3810_S_dfm.log closed on Wed Mar  4 22:09:03 2020