! Started logfile: /image_prod/ug002_uva//J0757+0956_X_dfm.log on Wed Mar 4 22:06:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0757+0956_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0757+0956_X_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.908642 visibilities/baseline/integration-bin. ! Found source: J0757+0956 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35328 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0757+0956_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.209391Jy sigma=8.195265 ! Fit after self-cal, rms=0.371098Jy sigma=2.662292 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6751 mas, bmaj=1.645 mas, bpa=4.192 degrees ! Estimated noise=0.927138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.480004 Jy ! Component: 100 - total flux cleaned = 0.620071 Jy ! Total flux subtracted in 100 components = 0.620071 Jy ! Clean residual min=-0.027411 max=0.061816 Jy/beam ! Clean residual mean=-0.000044 rms=0.005849 Jy/beam ! Combined flux in latest and established models = 0.620072 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.620072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163713Jy sigma=1.062644 ! Fit after self-cal, rms=0.162771Jy sigma=1.055533 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697089 Jy ! Component: 100 - total flux cleaned = 0.108618 Jy ! Total flux subtracted in 100 components = 0.108618 Jy ! Clean residual min=-0.018057 max=0.033162 Jy/beam ! Clean residual mean=-0.000013 rms=0.003730 Jy/beam ! Combined flux in latest and established models = 0.728689 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.728689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112105Jy sigma=0.741377 ! Fit after self-cal, rms=0.111774Jy sigma=0.738898 ! Inverting map ! Added new window around map position (1.2, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295824 Jy ! Component: 100 - total flux cleaned = 0.0476268 Jy ! Total flux subtracted in 100 components = 0.0476268 Jy ! Clean residual min=-0.016547 max=0.026743 Jy/beam ! Clean residual mean=-0.000006 rms=0.003169 Jy/beam ! Combined flux in latest and established models = 0.776316 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.776316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097276Jy sigma=0.647792 ! Fit after self-cal, rms=0.096876Jy sigma=0.644746 ! Inverting map ! Added new window around map position (-4, 14.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208257 Jy ! Component: 100 - total flux cleaned = 0.0323493 Jy ! Total flux subtracted in 100 components = 0.0323493 Jy ! Clean residual min=-0.013807 max=0.021717 Jy/beam ! Clean residual mean=0.000001 rms=0.002802 Jy/beam ! Combined flux in latest and established models = 0.808665 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.808665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089680Jy sigma=0.597514 ! Fit after self-cal, rms=0.089196Jy sigma=0.593839 ! Inverting map ! Added new window around map position (-1.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169491 Jy ! Component: 100 - total flux cleaned = 0.0268761 Jy ! Total flux subtracted in 100 components = 0.0268761 Jy ! Clean residual min=-0.012584 max=0.013977 Jy/beam ! Clean residual mean=0.000008 rms=0.002496 Jy/beam ! Combined flux in latest and established models = 0.835541 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.835541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084404Jy sigma=0.562668 ! Fit after self-cal, rms=0.084058Jy sigma=0.560320 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8682 mas, bmaj=1.953 mas, bpa=3.905 degrees ! Estimated noise=0.557807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172773 Jy ! Component: 100 - total flux cleaned = 0.0291915 Jy ! Component: 150 - total flux cleaned = 0.0382123 Jy ! Component: 200 - total flux cleaned = 0.0451978 Jy ! Total flux subtracted in 200 components = 0.0451978 Jy ! Clean residual min=-0.015789 max=0.015395 Jy/beam ! Clean residual mean=0.000008 rms=0.003268 Jy/beam ! Combined flux in latest and established models = 0.880739 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.880739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079070Jy sigma=0.529233 ! Fit after self-cal, rms=0.078828Jy sigma=0.527020 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8682 x 1.953 at 3.905 degrees (North through East) ! Clean map min=-0.015062 max=0.62946 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 KP 1.07 LA 1.02 ! MK 1.01 NL 1.09 OV 0.95 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 KP 1.06 LA 1.04 ! MK 0.99 NL 1.10 OV 0.94 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 KP 1.07 LA 1.02 ! MK 1.01 NL 1.09 OV 0.94 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 KP 1.04 LA 1.04 ! MK 1.00 NL 1.09 OV 0.94 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 KP 1.06 LA 1.01 ! MK 0.99 NL 1.07 OV 0.93 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 KP 1.07 LA 1.04 ! MK 1.01 NL 1.09 OV 0.94 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 KP 1.06 LA 1.03 ! MK 0.99 NL 1.08 OV 0.93 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 KP 1.06 LA 1.01 ! MK 1.02 NL 1.07 OV 0.94 PT 0.90 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 KP 1.05 LA 1.01 ! MK 1.00 NL 1.09 OV 0.93 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.07 KP 1.05 LA 1.02 ! MK 1.00 NL 1.07 OV 0.94 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 1.05 LA 1.03 ! MK 0.99 NL 1.07 OV 0.94 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 KP 1.07 LA 1.04 ! MK 1.04 NL 1.08 OV 0.94 PT 0.90 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.078828Jy sigma=0.527020 ! Fit after self-cal, rms=0.062447Jy sigma=0.417302 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8702 mas, bmaj=1.954 mas, bpa=4.039 degrees ! Estimated noise=0.560471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631977 Jy ! Component: 100 - total flux cleaned = 0.00872343 Jy ! Component: 150 - total flux cleaned = 0.0102334 Jy ! Component: 200 - total flux cleaned = 0.0116571 Jy ! Total flux subtracted in 200 components = 0.0116571 Jy ! Clean residual min=-0.005642 max=0.006272 Jy/beam ! Clean residual mean=0.000003 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.892396 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 85 components and 0.892396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059239Jy sigma=0.396375 ! Fit after self-cal, rms=0.059067Jy sigma=0.394919 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059067Jy sigma=0.394919 ! Fit after self-cal, rms=0.058006Jy sigma=0.388083 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8692 mas, bmaj=1.951 mas, bpa=4.013 degrees ! Estimated noise=0.558625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000885017 Jy ! Component: 100 - total flux cleaned = -0.000727665 Jy ! Component: 150 - total flux cleaned = -0.000291313 Jy ! Component: 200 - total flux cleaned = -3.49042e-05 Jy ! Total flux subtracted in 200 components = -3.49042e-05 Jy ! Clean residual min=-0.004330 max=0.003881 Jy/beam ! Clean residual mean=0.000003 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.892361 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 107 components and 0.892361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057046Jy sigma=0.381881 ! Fit after self-cal, rms=0.057007Jy sigma=0.381546 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763736 Jy ! Component: 100 - total flux cleaned = 0.000761061 Jy ! Component: 150 - total flux cleaned = 0.000862036 Jy ! Component: 200 - total flux cleaned = 0.000863413 Jy ! Total flux subtracted in 200 components = 0.000863413 Jy ! Clean residual min=-0.003921 max=0.003392 Jy/beam ! Clean residual mean=0.000002 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.893225 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 113 components and 0.893225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056616Jy sigma=0.379081 ! Fit after self-cal, rms=0.056598Jy sigma=0.378929 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056598Jy sigma=0.378929 ! Fit after self-cal, rms=0.056309Jy sigma=0.377606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8685 mas, bmaj=1.951 mas, bpa=4.018 degrees ! Estimated noise=0.557831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0027956 Jy ! Component: 100 - total flux cleaned = -0.0033327 Jy ! Component: 150 - total flux cleaned = -0.00351063 Jy ! Component: 200 - total flux cleaned = -0.00367632 Jy ! Total flux subtracted in 200 components = -0.00367632 Jy ! Clean residual min=-0.003369 max=0.002873 Jy/beam ! Clean residual mean=0.000001 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.889548 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 0.889548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055944Jy sigma=0.375213 ! Fit after self-cal, rms=0.055926Jy sigma=0.375088 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.44809e-05 Jy ! Component: 100 - total flux cleaned = 1.06949e-05 Jy ! Component: 150 - total flux cleaned = -5.74374e-05 Jy ! Component: 200 - total flux cleaned = -0.000117871 Jy ! Total flux subtracted in 200 components = -0.000117871 Jy ! Clean residual min=-0.003051 max=0.002791 Jy/beam ! Clean residual mean=-0.000000 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.889431 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 127 components and 0.889431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055760Jy sigma=0.374058 ! Fit after self-cal, rms=0.055753Jy sigma=0.374002 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055753Jy sigma=0.374002 ! Fit after self-cal, rms=0.055595Jy sigma=0.373365 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=3.153 mas, bpa=7.015 degrees ! Estimated noise=0.749482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321227 Jy ! Component: 100 - total flux cleaned = -0.00406766 Jy ! Component: 150 - total flux cleaned = -0.00443696 Jy ! Component: 200 - total flux cleaned = -0.00456299 Jy ! Total flux subtracted in 200 components = -0.00456299 Jy ! Clean residual min=-0.003100 max=0.003090 Jy/beam ! Clean residual mean=-0.000002 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.884868 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 149 components and 0.884867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055472Jy sigma=0.372637 ! Fit after self-cal, rms=0.055442Jy sigma=0.372445 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015147 Jy ! Component: 100 - total flux cleaned = -0.000383746 Jy ! Component: 150 - total flux cleaned = -0.000483539 Jy ! Component: 200 - total flux cleaned = -0.000574316 Jy ! Total flux subtracted in 200 components = -0.000574316 Jy ! Clean residual min=-0.002976 max=0.002836 Jy/beam ! Clean residual mean=-0.000003 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.884293 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 157 components and 0.884293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055400Jy sigma=0.372192 ! Fit after self-cal, rms=0.055387Jy sigma=0.372102 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8682 mas, bmaj=1.95 mas, bpa=4.038 degrees ! Estimated noise=0.557393 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8682 x 1.95 at 4.038 degrees (North through East) ! Clean map min=-0.0028638 max=0.6315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055387Jy sigma=0.372102 ! Fit after self-cal, rms=0.051152Jy sigma=0.338608 ! Inverting map and beam ! Estimated beam: bmin=0.8681 mas, bmaj=1.951 mas, bpa=4.034 degrees ! Estimated noise=0.557399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213206 Jy ! Component: 100 - total flux cleaned = -0.00259975 Jy ! Component: 150 - total flux cleaned = -0.00301113 Jy ! Component: 200 - total flux cleaned = -0.00328132 Jy ! Total flux subtracted in 200 components = -0.00328132 Jy ! Clean residual min=-0.002279 max=0.002051 Jy/beam ! Clean residual mean=-0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.881012 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 170 components and 0.881012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050986Jy sigma=0.337507 ! Fit after self-cal, rms=0.050979Jy sigma=0.337472 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000343184 Jy ! Component: 100 - total flux cleaned = -0.000438316 Jy ! Component: 150 - total flux cleaned = -0.000615349 Jy ! Component: 200 - total flux cleaned = -0.000696863 Jy ! Total flux subtracted in 200 components = -0.000696863 Jy ! Clean residual min=-0.002136 max=0.001948 Jy/beam ! Clean residual mean=-0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.880315 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 176 components and 0.880315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050905Jy sigma=0.336993 ! Fit after self-cal, rms=0.050902Jy sigma=0.336979 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050902Jy sigma=0.336979 ! Fit after self-cal, rms=0.050830Jy sigma=0.336683 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6735 mas, bmaj=1.64 mas, bpa=4.342 degrees ! Estimated noise=0.929671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.48061 Jy ! Component: 100 - total flux cleaned = 0.627197 Jy ! Component: 150 - total flux cleaned = 0.696055 Jy ! Component: 200 - total flux cleaned = 0.733149 Jy ! Total flux subtracted in 200 components = 0.733149 Jy ! Clean residual min=-0.009803 max=0.018601 Jy/beam ! Clean residual mean=-0.000014 rms=0.002103 Jy/beam ! Combined flux in latest and established models = 0.733149 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.733149 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8679 mas, bmaj=1.951 mas, bpa=4.043 degrees ! Estimated noise=0.557092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357918 Jy ! Component: 100 - total flux cleaned = 0.0594296 Jy ! Component: 150 - total flux cleaned = 0.0763183 Jy ! Component: 200 - total flux cleaned = 0.0890724 Jy ! Total flux subtracted in 200 components = 0.0890724 Jy ! Clean residual min=-0.004825 max=0.007460 Jy/beam ! Clean residual mean=-0.000014 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.822221 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 61 components and 0.822221 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00992172 Jy ! Component: 100 - total flux cleaned = 0.0177488 Jy ! Component: 150 - total flux cleaned = 0.0240351 Jy ! Component: 200 - total flux cleaned = 0.0291651 Jy ! Total flux subtracted in 200 components = 0.0291651 Jy ! Clean residual min=-0.003008 max=0.003674 Jy/beam ! Clean residual mean=-0.000006 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.851386 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 98 components and 0.851386 Jy ! Inverting map ! Added new window around map position (-5.8, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432342 Jy ! Component: 100 - total flux cleaned = 0.00787677 Jy ! Component: 150 - total flux cleaned = 0.0108831 Jy ! Component: 200 - total flux cleaned = 0.0132513 Jy ! Total flux subtracted in 200 components = 0.0132513 Jy ! Clean residual min=-0.002422 max=0.002440 Jy/beam ! Clean residual mean=-0.000003 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.864637 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 133 components and 0.864637 Jy ! Inverting map ! Added new window around map position (6.8, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225639 Jy ! Component: 100 - total flux cleaned = 0.00355504 Jy ! Component: 150 - total flux cleaned = 0.00456464 Jy ! Component: 200 - total flux cleaned = 0.00546763 Jy ! Total flux subtracted in 200 components = 0.00546763 Jy ! Clean residual min=-0.002167 max=0.002121 Jy/beam ! Clean residual mean=-0.000003 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.870105 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 160 components and 0.870105 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=3.157 mas, bpa=7.2 degrees ! Estimated noise=0.748642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234556 Jy ! Component: 100 - total flux cleaned = 0.0034865 Jy ! Component: 150 - total flux cleaned = 0.00383912 Jy ! Component: 200 - total flux cleaned = 0.00419064 Jy ! Total flux subtracted in 200 components = 0.00419064 Jy ! Clean residual min=-0.002363 max=0.002494 Jy/beam ! Clean residual mean=-0.000005 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.874295 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.2, 32.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237564 Jy ! Component: 100 - total flux cleaned = 0.00262814 Jy ! Component: 150 - total flux cleaned = 0.0030121 Jy ! Component: 200 - total flux cleaned = 0.00324315 Jy ! Total flux subtracted in 200 components = 0.00324315 Jy ! Clean residual min=-0.002187 max=0.001967 Jy/beam ! Clean residual mean=-0.000005 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.877538 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 225 components and 0.877538 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8679 mas, bmaj=1.951 mas, bpa=4.043 degrees ! Estimated noise=0.557092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507589 Jy ! Component: 100 - total flux cleaned = 0.000499658 Jy ! Component: 150 - total flux cleaned = 0.000549686 Jy ! Component: 200 - total flux cleaned = 0.000696346 Jy ! Total flux subtracted in 200 components = 0.000696346 Jy ! Clean residual min=-0.001831 max=0.001718 Jy/beam ! Clean residual mean=-0.000002 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.878235 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 257 components and 0.878235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050547Jy sigma=0.334931 ! Fit after self-cal, rms=0.050487Jy sigma=0.334554 wmodel J0757+0956_X_map.mod ! Writing 257 model components to file: J0757+0956_X_map.mod wobs J0757+0956_X_uvs.fits ! Writing UV FITS file: J0757+0956_X_uvs.fits wwins J0757+0956_X_map.win ! wwins: Wrote 9 windows to J0757+0956_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000820428 Jy ! Component: 100 - total flux cleaned = -0.00120515 Jy ! Component: 150 - total flux cleaned = -0.00128745 Jy ! Component: 200 - total flux cleaned = -0.00144235 Jy ! Component: 250 - total flux cleaned = -0.0016157 Jy ! Component: 300 - total flux cleaned = -0.00180639 Jy ! Component: 350 - total flux cleaned = -0.00185258 Jy ! Component: 400 - total flux cleaned = -0.00187552 Jy ! Component: 450 - total flux cleaned = -0.00189724 Jy ! Component: 500 - total flux cleaned = -0.00187599 Jy ! Component: 550 - total flux cleaned = -0.00191771 Jy ! Component: 600 - total flux cleaned = -0.00193768 Jy ! Component: 650 - total flux cleaned = -0.00195704 Jy ! Component: 700 - total flux cleaned = -0.00191859 Jy ! Component: 750 - total flux cleaned = -0.00197579 Jy ! Component: 800 - total flux cleaned = -0.00199437 Jy ! Component: 850 - total flux cleaned = -0.00203099 Jy ! Component: 900 - total flux cleaned = -0.00204888 Jy ! Component: 950 - total flux cleaned = -0.00201461 Jy ! Component: 1000 - total flux cleaned = -0.00206607 Jy ! Component: 1050 - total flux cleaned = -0.00203252 Jy ! Component: 1100 - total flux cleaned = -0.00199985 Jy ! Component: 1150 - total flux cleaned = -0.00196794 Jy ! Component: 1200 - total flux cleaned = -0.0019685 Jy ! Component: 1250 - total flux cleaned = -0.00198437 Jy ! Component: 1300 - total flux cleaned = -0.00199979 Jy ! Component: 1350 - total flux cleaned = -0.0020449 Jy ! Component: 1400 - total flux cleaned = -0.00205973 Jy ! Component: 1450 - total flux cleaned = -0.0021183 Jy ! Component: 1500 - total flux cleaned = -0.00211807 Jy ! Component: 1550 - total flux cleaned = -0.00214654 Jy ! Component: 1600 - total flux cleaned = -0.00216065 Jy ! Component: 1650 - total flux cleaned = -0.0021745 Jy ! Component: 1700 - total flux cleaned = -0.00217477 Jy ! Component: 1750 - total flux cleaned = -0.00220185 Jy ! Component: 1800 - total flux cleaned = -0.00225502 Jy ! Component: 1850 - total flux cleaned = -0.00228096 Jy ! Component: 1900 - total flux cleaned = -0.0023326 Jy ! Component: 1950 - total flux cleaned = -0.00229411 Jy ! Component: 2000 - total flux cleaned = -0.00231926 Jy ! Component: 2050 - total flux cleaned = -0.00231933 Jy ! Component: 2100 - total flux cleaned = -0.00231912 Jy ! Component: 2150 - total flux cleaned = -0.00231905 Jy ! Component: 2200 - total flux cleaned = -0.00233124 Jy ! Component: 2250 - total flux cleaned = -0.00233128 Jy ! Component: 2300 - total flux cleaned = -0.00228433 Jy ! Component: 2350 - total flux cleaned = -0.00228429 Jy ! Component: 2400 - total flux cleaned = -0.00227283 Jy ! Component: 2450 - total flux cleaned = -0.00221588 Jy ! Component: 2500 - total flux cleaned = -0.00223853 Jy ! Component: 2550 - total flux cleaned = -0.0021828 Jy ! Component: 2600 - total flux cleaned = -0.00214977 Jy ! Component: 2650 - total flux cleaned = -0.00216086 Jy ! Component: 2700 - total flux cleaned = -0.00219336 Jy ! Component: 2750 - total flux cleaned = -0.00220401 Jy ! Component: 2800 - total flux cleaned = -0.00217196 Jy ! Component: 2850 - total flux cleaned = -0.00217171 Jy ! Component: 2900 - total flux cleaned = -0.00218213 Jy ! Component: 2950 - total flux cleaned = -0.00216146 Jy ! Component: 3000 - total flux cleaned = -0.00215127 Jy ! Component: 3050 - total flux cleaned = -0.00218188 Jy ! Component: 3100 - total flux cleaned = -0.00219182 Jy ! Component: 3150 - total flux cleaned = -0.00222178 Jy ! Component: 3200 - total flux cleaned = -0.00220194 Jy ! Component: 3250 - total flux cleaned = -0.00221185 Jy ! Component: 3300 - total flux cleaned = -0.00221186 Jy ! Component: 3350 - total flux cleaned = -0.00222146 Jy ! Component: 3400 - total flux cleaned = -0.00216398 Jy ! Component: 3450 - total flux cleaned = -0.00217348 Jy ! Component: 3500 - total flux cleaned = -0.00218289 Jy ! Component: 3550 - total flux cleaned = -0.00216409 Jy ! Component: 3600 - total flux cleaned = -0.00217341 Jy ! Component: 3650 - total flux cleaned = -0.00215492 Jy ! Component: 3700 - total flux cleaned = -0.00211837 Jy ! Component: 3750 - total flux cleaned = -0.00212748 Jy ! Component: 3800 - total flux cleaned = -0.0021455 Jy ! Component: 3850 - total flux cleaned = -0.00212753 Jy ! Component: 3900 - total flux cleaned = -0.00210093 Jy ! Component: 3950 - total flux cleaned = -0.00206573 Jy ! Component: 4000 - total flux cleaned = -0.00204836 Jy ! Component: 4050 - total flux cleaned = -0.00199646 Jy ! Total flux subtracted in 4096 components = -0.00199633 Jy ! Clean residual min=-0.000498 max=0.000446 Jy/beam ! Clean residual mean=-0.000000 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.876238 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 559 components and 0.876239 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0757+0956_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8679 x 1.951 at 4.043 degrees (North through East) ! Clean map min=-0.0011453 max=0.63422 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0757+0956_X_map.fits wmodel /image_prod/ug002_uva//J0757+0956_X_map.mod ! Writing 559 model components to file: /image_prod/ug002_uva//J0757+0956_X_map.mod wobs /image_prod/ug002_uva//J0757+0956_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0757+0956_X_uvs.fits wwins /image_prod/ug002_uva//J0757+0956_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0757+0956_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.634223 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00014781 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0699173 0.0699173 0.139835 0.279669 0.559338 1.11868 2.23735 4.47471 8.94941 17.8988 35.7976 71.5953 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.634 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4290.79 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0757+0956_X_dfm.log closed on Wed Mar 4 22:06:43 2020